Pagina 2 di 3

Re: Configurazione wireless slackware 13.37

Inviato: sab ott 01, 2011 18:18
da halemmerick

Codice: Seleziona tutto

root@slackdomain:~/Desktop# lsmod | grep b43
b43                   159435  0
mac80211              181473  1 b43
cfg80211              122542  2 b43,mac80211
ssb                    40012  1 b43
mmc_core               57264  2 b43,ssb
pcmcia                 32618  2 b43,ssb
root@slackdomain:~/Desktop# dmesg |grep b43
[    8.177057] b43-pci-bridge 0000:30:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    8.177143] b43-pci-bridge 0000:30:00.0: setting latency timer to 64
[    8.476808] b43-phy0: Broadcom 4311 WLAN found (core revision 13)
[    8.501344] Registered led device: b43-phy0::tx
[    8.501367] Registered led device: b43-phy0::rx
[    8.501390] Registered led device: b43-phy0::radio
[   36.431426] b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found
[   36.431437] b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found
[   36.431446] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[  118.330083] b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found
[  118.330088] b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found
[  118.330091] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[  121.692507] b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found
[  121.692512] b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found
[  121.692515] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[  133.291632] b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found
[  133.291645] b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found
[  133.291653] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[  804.376182] b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found
[  804.376187] b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found
[  804.376190] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[ 1428.240912] b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found
[ 1428.240917] b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found
[ 1428.240920] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[ 1440.024715] b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found
[ 1440.024725] b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found
[ 1440.024733] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[ 1441.586366] b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found
[ 1441.586371] b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found
[ 1441.586374] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[ 1450.549720] b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found
[ 1450.549731] b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found
[ 1450.549739] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[ 1451.215781] b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found
[ 1451.215792] b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found
[ 1451.215800] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[ 1702.614886] b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found
[ 1702.614897] b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found
[ 1702.614905] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[ 1796.027061] b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found
[ 1796.027071] b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found
[ 1796.027079] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[ 1802.437463] b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found
[ 1802.437474] b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found
[ 1802.437483] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[ 1848.035493] b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found
[ 1848.035506] b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found
[ 1848.035515] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[ 2030.435741] b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found
[ 2030.435753] b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found
[ 2030.435761] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[ 2503.584254] b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found
[ 2503.584266] b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found
[ 2503.584273] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[ 3175.864507] b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found
[ 3175.864518] b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found
[ 3175.864526] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
root@slackdomain:~/Desktop# iwlist wlan0 scan
wlan0     Interface doesn't support scanning : Network is down

root@slackdomain:~/Desktop#

Re: Configurazione wireless slackware 13.37

Inviato: sab ott 01, 2011 18:35
da Ansa89
halemmerick ha scritto:

Codice: Seleziona tutto

root@slackdomain:~/Desktop# dmesg |grep b43
[   36.431426] b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found
[   36.431437] b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found
[   36.431446] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.

Ok, il problema è il firmware.
Scarica il file che ti allego, scompattalo e copia la directory "b43" in "/lib/firmware".
Poi fai

Codice: Seleziona tutto

# rmmod b43
# modprobe b43

E spera che funzioni.

Re: Configurazione wireless slackware 13.37

Inviato: sab ott 01, 2011 18:48
da halemmerick
Ok, poi cosa devo fare?

Re: Configurazione wireless slackware 13.37

Inviato: sab ott 01, 2011 18:50
da Ansa89
Posta l'output di "dmesg | tail" ed eventualmente riprova a dare

Codice: Seleziona tutto

# ifconfig wlan0 up

Re: Configurazione wireless slackware 13.37

Inviato: sab ott 01, 2011 21:59
da halemmerick

Codice: Seleziona tutto

root@slackdomain:~# dmesg | tail
[11013.512106] EXT4-fs (sda2): re-mounted. Opts: commit=0
[11038.290196] b43-phy0 ERROR: Firmware file "b43/b0g0initvals13.fw" not found
[11038.290201] b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found
[11038.290204] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[11039.959091] b43-phy0 ERROR: Firmware file "b43/b0g0initvals13.fw" not found
[11039.959102] b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found
[11039.959110] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[11122.573312] b43-phy0 ERROR: Firmware file "b43/b0g0initvals13.fw" not found
[11122.573323] b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found
[11122.573331] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
root@slackdomain:~#   

Re: Configurazione wireless slackware 13.37

Inviato: sab ott 01, 2011 23:02
da Ansa89
Ok, errore mio.
Prova a riscaricare l'archivio compresso e copiare la directory "b43" in "/lib/firmware" e rifare la procedura precedente.

Re: Configurazione wireless slackware 13.37

Inviato: sab ott 01, 2011 23:15
da halemmerick
Ma in /lib/firmware c'è già la directory b43, che è quella che ho copiato prima...devo quindi cancellarla e rifare tutto da capo?

Re: Configurazione wireless slackware 13.37

Inviato: sab ott 01, 2011 23:18
da Ansa89
Puoi anche sovrascriverla, fai come ti è più comodo (tanto si tratta di un "rm -R /lib/firmware/b43 && cp -R b43 /lib/firmware" che richiede al massimo 2 minuti).

Re: Configurazione wireless slackware 13.37

Inviato: sab ott 01, 2011 23:51
da maupao
Ciao
benvenuto nel mondo slack, vedrai che ti troverai bene.
Ho avuto anche io a che fare molte volte con le broadcom e mi hanno sempre dato un po' da fare per farle funzionare. In questo thread trovi delle informazioni che ti possono servire. Leggi in particolare la risposta di phobos che segna bene tutti i passaggi.
ciao

Re: Configurazione wireless slackware 13.37

Inviato: mar ott 04, 2011 14:58
da halemmerick
Vi ringrazio tantissimo, ora da Wicd vedo tutte le reti wireless disponibili, c'è altro da fare? :D

Re: Configurazione wireless slackware 13.37

Inviato: mar ott 04, 2011 19:43
da Ansa89
halemmerick ha scritto:c'è altro da fare? :D

Dipende da te ;) .

Re: Configurazione wireless slackware 13.37

Inviato: mar ott 04, 2011 19:56
da halemmerick
Per il momento nulla! Vi ringrazio tantissimo, alla prossima!

Che bella Slackware!!! \:D/

Buona serata a tutti voi

Re: Configurazione wireless slackware 13.37[Risolto]

Inviato: sab ott 08, 2011 20:29
da Procopio
ciao a tutti! mi accorpo a questo post perchè ho un problema del tutto analogo!

ho correttamente installato il wicd ed anche il wicd-client-kde, inanzi tutti cos'è la "gui" di wicd (o di un programma in generale), la spia della rete wireless è accesa, ma nell'icona del wicd-client-kde sul pannello non vedo nessuna rete wireless (ma neanche via cavo se è solo pre questo) ad ogni modo vi posto un po di comandi sul mio wireless:


Codice: Seleziona tutto

root@darkstar:/home/matteo/download# iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

wlan0     IEEE 802.11abg  ESSID:off/any 
          Mode:Managed  Access Point: Not-Associated   Tx-Power=15 dBm   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off


Codice: Seleziona tutto

root@darkstar:/home/matteo/download# lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8400M GT] (rev a1)
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller (rev 13)
06:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
08:03.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
08:03.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller
08:03.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/.)



Codice: Seleziona tutto

root@darkstar:/home/matteo/download# ls -l /etc/rc.d/rc.wicd
-rwxr-xr-x 1 root root 1087 Apr 30  2010 /etc/rc.d/rc.wicd



l'ifconfig wlan0 up sembra andare a buon fine (non restituisce nulla)


non dovrei avere nulla che non va nel firmware ma giudicate voi :)

Codice: Seleziona tutto

root@darkstar:/home/matteo/download# lsmod | grep b43
root@darkstar:/home/matteo/download# dmesg | grep b43
root@darkstar:/home/matteo/download# iwlist wlan0 scan
wlan0     Scan completed :
          Cell 01 - Address: 00:22:B0:AE:CF:CF
                    Channel:6
                    Frequency:2.437 GHz (Channel 6)
                    Quality=59/70  Signal level=-51 dBm 
                    Encryption key:off
                    ESSID:"InfostradaWiFi"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
                              24 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=0000001e132aefc4
                    Extra: Last beacon: 2467ms ago
                    IE: Unknown: 000E496E666F73747261646157694669
                    IE: Unknown: 010882848B962430486C
                    IE: Unknown: 030106
                    IE: Unknown: 2A0100
                    IE: Unknown: 2F0100
                    IE: Unknown: 32040C121860
                    IE: Unknown: DD09001018020010000000
          Cell 02 - Address: 00:1C:A2:78:44:1E
                    Channel:11
                    Frequency:2.462 GHz (Channel 11)
                    Quality=26/70  Signal level=-84 dBm 
                    Encryption key:on
                    ESSID:"Alice-67832702"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
                              24 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=0000002754831184
                    Extra: Last beacon: 2287ms ago
                    IE: Unknown: 000E416C6963652D3637383332373032
                    IE: Unknown: 010882848B962430486C
                    IE: Unknown: 03010B
                    IE: Unknown: 2A0100
                    IE: Unknown: 2F0100
                    IE: Unknown: 32040C121860
                    IE: Unknown: DD06001018020014
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : TKIP
                        Authentication Suites (1) : PSK

Re: Configurazione wireless slackware 13.37[Risolto]

Inviato: dom ott 09, 2011 10:07
da Ansa89
1) È inutile che fai grep su "b43": i tuoi driver sono gli iwl3945 che sono implementati nel kernel da parecchio tempo.
2) Devi controllare di aver installato il pacchetto del firmware (che fa parte della serie "n").
3) Hai disabilitato "/etc/rc.d/rc.inet1"?
4) Hai provato ad usare la gui normale?

Re: Configurazione wireless slackware 13.37[Risolto]

Inviato: dom ott 09, 2011 11:26
da Procopio
Ansa89 ha scritto:1) È inutile che fai grep su "b43": i tuoi driver sono gli iwl3945 che sono implementati nel kernel da parecchio tempo.
capito

Ansa89 ha scritto:4) Hai provato ad usare la gui normale?
si, sono riuscito a selezionare la rete wireless e funge correttamente, quindi per me la questione è a posto.

un ultima cosa: nelle preferenze, il DHCP Client è settato su DHCPCD, mentre io per la wired utilizzavo dhclient, è normale che sia così o la selezione mi si è spostata in automatico? perchè?