Pagina 1 di 1

problemi al boot

Inviato: mar ott 14, 2003 20:49
da Allanon
Ciao a tutti, mi sono appena registrato e subito vi disturbo:-) con il seguente problema: <BR>in fase di boot della mia nuova 9.1 mi si presentano vari errori alcuni dei quali sono: <BR> <BR>- insmod /lib/modules/2.4.22/kernel/drivers/char/i810-rng.o.gz: init_module: no such device <BR> <BR>- insmod /lib/modules/2.4.22/kernel/drivers/char/i810-rng.o.gz: init_module: Hint: insmod errors can because by incorrect module <BR> <BR>e altri che non posso ricordare visto che lo schermo scorre troppo veloce. <BR> <BR>Comunque con dmesg questo è il risutato: <BR> <BR>root@darkstar:~# dmesg <BR>Linux version 2.4.22 (root@midas) (gcc version 3.2.3) #6 Tue Sep 2 17:43:01 PDT 2003 <BR>BIOS-provided physical RAM map: <BR> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) <BR> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) <BR> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) <BR> BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) <BR> BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) <BR> BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) <BR> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) <BR>511MB LOWMEM available. <BR>On node 0 totalpages: 131056 <BR>zone(0): 4096 pages. <BR>zone(1): 126960 pages. <BR>zone(2): 0 pages. <BR>Kernel command line: BOOT_IMAGE=Slack ro root=304 <BR>Initializing CPU#0 <BR>Detected 2019.924 MHz processor. <BR>Console: colour dummy device 80x25 <BR>Calibrating delay loop... 4023.91 BogoMIPS <BR>Memory: 515364k/524224k available (1813k kernel code, 8472k reserved, 614k data, 116k init, 0k highmem) <BR>Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) <BR>Inode cache hash table entries: 32768 (order: 6, 262144 bytes) <BR>Mount cache hash table entries: 512 (order: 0, 4096 bytes) <BR>Buffer cache hash table entries: 32768 (order: 5, 131072 bytes) <BR>Page-cache hash table entries: 131072 (order: 7, 524288 bytes) <BR>CPU: Trace cache: 12K uops, L1 D cache: 8K <BR>CPU: L2 cache: 512K <BR>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 <BR>CPU: Common caps: 3febfbff 00000000 00000000 00000000 <BR>CPU: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04 <BR>Enabling fast FPU save and restore... done. <BR>Enabling unmasked SIMD FPU exception support... done. <BR>Checking ´hlt´ instruction... OK. <BR>POSIX conformance testing by UNIFIX <BR>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) <BR>mtrr: detected mtrr type: Intel <BR>PCI: PCI BIOS revision 2.10 entry at 0xfb1e0, last bus=2 <BR>PCI: Using configuration type 1 <BR>PCI: Probing PCI hardware <BR>PCI: Probing PCI hardware (bus 00) <BR>PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 <BR>Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge <BR>PCI: Using IRQ router PIIX [8086/24c0] at 00:1f.0 <BR>PCI: Found IRQ 5 for device 00:1f.1 <BR>Linux NET4.0 for Linux 2.4 <BR>Based upon Swansea University Computer Society NET3.039 <BR>Initializing RT netlink socket <BR>Starting kswapd <BR>VFS: Disk quotas vdquot_6.5.1 <BR>Journalled Block Device driver loaded <BR>vesafb: framebuffer at 0xd0000000, mapped to 0xe080d000, size 1536k <BR>vesafb: mode is 1024x768x8, linelength=1024, pages=3 <BR>vesafb: protected mode interface info at c000:e350 <BR>vesafb: scrolling: redraw <BR>Console: switching to colour frame buffer device 128x48 <BR>fb0: VESA VGA frame buffer device <BR>pty: 512 Unix98 ptys configured <BR>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled <BR>ttyS00 at 0x03f8 (irq = 4) is a 16550A <BR>ttyS01 at 0x02f8 (irq = 3) is a 16550A <BR>Real Time Clock Driver v1.10e <BR>Floppy drive(s): fd0 is 1.44M <BR>FDC 0 is a post-1991 82077 <BR>RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize <BR>loop: loaded (max 8 devices) <BR>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 <BR>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <BR>ICH4: IDE controller at PCI slot 00:1f.1 <BR>PCI: Found IRQ 5 for device 00:1f.1 <BR>ICH4: chipset revision 1 <BR>ICH4: not 100% native mode: will probe irqs later <BR> ide0: BM-DMA at 0xcc00-0xcc07, BIOS settings: hda:DMA, hdb:pio <BR> ide1: BM-DMA at 0xcc08-0xcc0f, BIOS settings: hdc:DMA, hdd:DMA <BR>hda: MAXTOR 6L040J2, ATA DISK drive <BR>blk: queue c03a9d80, I/O limit 4095Mb (mask 0xffffffff) <BR>hdc: Pioneer DVD-ROM ATAPIModel DVD-500M 010, ATAPI CD/DVD-ROM drive <BR>hdd: SAMSUNG CD-R/RW SW-240B, ATAPI CD/DVD-ROM drive <BR>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <BR>ide1 at 0x170-0x177,0x376 on irq 15 <BR>hda: attached ide-disk driver. <BR>hda: host protected area => 1 <BR>hda: 78177792 sectors (40027 MB) w/1819KiB Cache, CHS=4866/255/63, UDMA(100) <BR>hdc: attached ide-cdrom driver. <BR>hdc: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(66) <BR>Uniform CD-ROM driver Revision: 3.12 <BR>hdd: attached ide-cdrom driver. <BR>hdd: ATAPI 40X CD-ROM CD-R/RW drive, 8192kB Cache, DMA <BR>Partition check: <BR> hda: hda1 hda2 hda3 hda4 <BR>SCSI subsystem driver Revision: 1.00 <BR>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 <BR>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 <BR>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 <BR>md: linear personality registered as nr 1 <BR>md: raid0 personality registered as nr 2 <BR>md: raid1 personality registered as nr 3 <BR>md: raid5 personality registered as nr 4 <BR>raid5: measuring checksumming speed <BR> 8regs : 2340.400 MB/sec <BR> 32regs : 1444.000 MB/sec <BR> pIII_sse : 2640.800 MB/sec <BR> pII_mmx : 2306.000 MB/sec <BR> p5_mmx : 2246.800 MB/sec <BR>raid5: using function: pIII_sse (2640.800 MB/sec) <BR>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 <BR>md: Autodetecting RAID arrays. <BR>md: autorun ... <BR>md: ... autorun DONE. <BR>LVM version 1.0.5+(22/07/2002) <BR>Initializing Cryptographic API <BR>NET4: Linux TCP/IP 1.0 for NET4.0 <BR>IP Protocols: ICMP, UDP, TCP <BR>IP: routing cache hash table of 4096 buckets, 32Kbytes <BR>TCP: Hash tables configured (established 32768 bind 65536) <BR>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. <BR>FAT: bogus logical sector size 55557 <BR>UMSDOS: msdos_read_super failed, mount aborted. <BR>FAT: bogus logical sector size 55557 <BR>FAT: bogus logical sector size 55557 <BR>reiserfs: found format "3.6" with standard journal <BR>reiserfs: checking transaction log (device ide0(3,4)) ... <BR>for (ide0(3,4)) <BR>ide0(3,4):Using r5 hash to sort names <BR>VFS: Mounted root (reiserfs filesystem) readonly. <BR>Freeing unused kernel memory: 116k freed <BR>Adding Swap: 506036k swap-space (priority -1) <BR>kjournald starting. Commit interval 5 seconds <BR>EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal <BR>EXT3-fs: mounted filesystem with ordered data mode. <BR>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) <BR>Linux agpgart interface v0.99 (c) Jeff Hartmann <BR>agpgart: Maximum main memory to use for agp memory: 439M <BR>agpgart: Detected Intel i845 chipset <BR>agpgart: AGP aperture is 64M @ 0xe0000000 <BR>scsi0 : SCSI host adapter emulation for IDE ATAPI devices <BR>PCI: Found IRQ 9 for device 02:04.0 <BR>8139too Fast Ethernet driver 0.9.26 <BR>PCI: Found IRQ 11 for device 02:02.0 <BR>eth0: D-Link DFE-538TX (RealTek RTL8139) at 0xe0aea000, 00:05:5d:47:9e:90, IRQ 11 <BR>eth0: Identified 8139 chip type ´RTL-8139C´ <BR>i810_rng: RNG not detected <BR>usb.c: registered new driver usbdevfs <BR>usb.c: registered new driver hub <BR>PCI: Setting latency timer of device 00:1d.7 to 64 <BR>ehci_hcd 00:1d.7: Intel Corp. 82801DB USB2 <BR>ehci_hcd 00:1d.7: irq 11, pci mem e0b02000 <BR>usb.c: new USB bus registered, assigned bus number 1 <BR>ehci_hcd 00:1d.7: enabled 64bit PCI DMA <BR>PCI: 00:1d.7 PCI cache line size set incorrectly (0 bytes) by BIOS/FW. <BR>PCI: 00:1d.7 PCI cache line size corrected to 16. <BR>ehci_hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-19/2.4 <BR>hub.c: USB hub found <BR>hub.c: 6 ports detected <BR>uhci.c: USB Universal Host Controller Interface driver v1.1 <BR>PCI: Setting latency timer of device 00:1d.0 to 64 <BR>uhci.c: USB UHCI at I/O 0xb800, IRQ 5 <BR>usb.c: new USB bus registered, assigned bus number 2 <BR>hub.c: USB hub found <BR>hub.c: 2 ports detected <BR>PCI: Setting latency timer of device 00:1d.1 to 64 <BR>uhci.c: USB UHCI at I/O 0xb000, IRQ 5 <BR>usb.c: new USB bus registered, assigned bus number 3 <BR>hub.c: USB hub found <BR>hub.c: 2 ports detected <BR>PCI: Setting latency timer of device 00:1d.2 to 64 <BR>uhci.c: USB UHCI at I/O 0xb400, IRQ 9 <BR>usb.c: new USB bus registered, assigned bus number 4 <BR>hub.c: USB hub found <BR>hub.c: 2 ports detected <BR>i810_rng: RNG not detected <BR>i810_rng: RNG not detected <BR>i810_rng: RNG not detected <BR>i810_rng: RNG not detected <BR>i810_rng: RNG not detected <BR>hub.c: new USB device 00:1d.0-1, assigned address 2 <BR>usb.c: USB device 2 (vend/prod 0x3f0/0x6004) is not claimed by any active driver. <BR>i810_rng: RNG not detected <BR>i810_rng: RNG not detected <BR>i810_rng: RNG not detected <BR>i810_rng: RNG not detected <BR>i810_rng: RNG not detected <BR>i810_rng: RNG not detected <BR>i810_rng: RNG not detected <BR>usb.c: registered new driver usblp <BR>printer.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004 <BR>printer.c: v0.11: USB Printer Device Class driver <BR>parport0: PC-style at 0x378 [PCSPP,TRISTATE] <BR>lp0: using parport0 (polling). <BR>eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 41e1. <BR>CSLIP: code copyright 1989 Regents of the University of California <BR>PPP generic driver version 2.4.2 <BR> <BR>Non riporta proprio gli stessi errori ma alcune voci si ritrovano anche qui, quale è il problema? <BR>Grazie per le risposte. <BR> <BR>ps. ho un HD cosi partizionato hd1 / mdk, hd2 swap, hda3 /home (condivisa anche con slack), e hda4 / slack<br>

problemi al boot

Inviato: mar ott 14, 2003 23:28
da Loris
i810_rng dovrebbe gestire il generatore casuale di numeri del chipset <BR>Intel 810 che magari è sulla tua scheda madre. <BR>Eventualmente metti il modulo in /etc/hotplug/blacklist così da evitare il caricamento. <BR><br>

problemi al boot

Inviato: mer ott 15, 2003 19:45
da Allanon
Intanto grazie per la risposta (anche per l´altro post) e visto che non sono molto pratico di slack e linux in generale, mi potresti dire in parole semplici a cosa serve i810_rng e cosa succede in pratica se evito di caricarlo al boot? <BR>Grazie ancora.<br>

problemi al boot

Inviato: mer ott 15, 2003 23:49
da Loris
Ho trovato questo ( <a href="http://www.slacky.it/misto/sospeso/i810_rng.txt">i810_rng</a> ) secondo me se lo disabiliti non dovresti areve problemi, molti in rete hanno lo stesso problema e risolvono tutti sistemando il modulo nella blacklist :-? <br>