Problem while reading. Retrying from sector 1734912.
Read error in sector 1734960.
Incollo il debuggin output dell'errore in basso.Cercando su Internet ho trovato che forse si tratta di un bug di K3B.Se mi da' un errore in lettura dei settori dopo la masterizzazione significa che la copia non e' andata a buon fine e quindi avrei problemi nell'utilizzare quell'immagine o no?Come posso risolvere?
Grazie
Codice: Seleziona tutto
Devices
-----------------------
MATSHITA BD-MLT UJ240AFW 1.00 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, BD-ROM, BD-R, BD-RE, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW, BD-ROM, BD-R Sequential (SRM), BD-R Random (RRM), BD-RE] [SAO, TAO, RAW, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump, Random Recording, Sequential Recording, Sequential Recording + POW] [%7]
K3b::DataTrackReader
-----------------------
reading sectors 0 to 1923239 with sector size 2048. Length: 1923240 sectors, 3938795520 bytes.
using buffer size of 64 blocks.
Problem while reading. Retrying from sector 1725824.
Problem while reading. Retrying from sector 1729344.
Problem while reading. Retrying from sector 1734912.
Read error in sector 1734960.
Read a total of 1734912 sectors (3553099776 bytes)
System
-----------------------
K3b Version: 2.0.2
KDE Version: 4.8.4 (4.8.4)
QT Version: 4.8.2
Kernel: 3.2.0-4-amd64
Used versions
-----------------------
cdrecord: 1.1.11
cdrecord
-----------------------
/usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.11
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'MATSHITA'
Identification : 'BD-MLT UJ240AFW '
Revision : '1.00'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x001B (DVD+R)
Profile: 0x0041 (BD-R sequential recording)
Profile: 0x0042 (BD-R random recording)
Profile: 0x0043 (BD-RE)
Profile: 0x0040 (BD-ROM)
Profile: 0x0012 (DVD-RAM)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R) (current)
Profile: 0x001A (DVD+RW)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1376256 = 1344 KB
FIFO size : 12582912 = 12288 KB
Speed set to 11080 KB/s
Track 01: data 3756 MB
Total size: 4313 MB (427:23.20) = 1923240 sectors
Lout start: 4314 MB (427:25/15) = 1923240 sectors
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
Blocks total: 2295104 Blocks current: 2295104 Blocks remaining: 371864
Starting to write CD/DVD at speed 8.0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Starting new track at sector: 0
Track 01: 0 of 3756 MB written.
Track 01: 3756 of 3756 MB written (fifo 100%) [buf 99%] 8.1x.
Track 01: Total bytes read/written: 3938795520/3938795520 (1923240 sectors).
Writing time: 538.613s
Average write speed 5.4x.
Min drive buffer fill was 97%
Fixating...
Fixating time: 14.666s
/usr/bin/wodim: fifo had 62040 puts and 62040 gets.
/usr/bin/wodim: fifo was 0 times empty and 24292 times full, min fill was 91%.
cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=8 -sao driveropts=burnfree -data -tsize=1923240s -
