Ciao
ho dovute reinstallare slack 14.1 a causa di un "ripristino" hardware, tutto è filato liscio finchè non ho installato grub2.
Succede che all' avvio di slack arrivo al login, sono ancora in init3, il server X non si avvia, mentre se faccio partire slack dal DVD tutto funziona regoalrmente. Ho provato a reinstallre i driver NVIDIA, dopo avvio da DVD ma non è cambiato nulla, non posso reinstallarli dopo avvio da grub in quanto come tento di dare il comando sh NVIDIA... dopo che ho digitato 7/8 lettere è come se il cursore andasse a capo ed appaiono delle scritte strane.
Che posso fare?
Dopo installazione grub2 X non parte
Moderatore: Staff
Regole del forum
1) Citare sempre la versione di Slackware64 usata, la versione del Kernel e magari anche la versione della libreria coinvolta. Questi dati aiutano le persone che possono rispondere.
2) Per evitare confusione prego inserire in questo forum solo topic che riguardano appunto Slackware64, se l'argomento è Slackware32 o generale usate rispettivamente il forum Slackware o Gnu/Linux in genere.
3) Leggere attentamente le risposte ricevute
4) Scrivere i messaggi con il colore di default, evitare altri colori.
5) Scrivere in Italiano o in Inglese, se possibile grammaticalmente corretto, evitate stili di scrittura poco chiari, quindi nessuna abbreviazione tipo telegramma o scrittura stile SMS o CHAT.
6) Appena registrati è consigliato presentarsi nel forum dedicato.
La non osservanza delle regole porta a provvedimenti di vari tipo da parte dello staff, in particolare la non osservanza della regola 5 porta alla cancellazione del post e alla segnalazione dell'utente. In caso di recidività l'utente rischia il ban temporaneo.
1) Citare sempre la versione di Slackware64 usata, la versione del Kernel e magari anche la versione della libreria coinvolta. Questi dati aiutano le persone che possono rispondere.
2) Per evitare confusione prego inserire in questo forum solo topic che riguardano appunto Slackware64, se l'argomento è Slackware32 o generale usate rispettivamente il forum Slackware o Gnu/Linux in genere.
3) Leggere attentamente le risposte ricevute
4) Scrivere i messaggi con il colore di default, evitare altri colori.
5) Scrivere in Italiano o in Inglese, se possibile grammaticalmente corretto, evitate stili di scrittura poco chiari, quindi nessuna abbreviazione tipo telegramma o scrittura stile SMS o CHAT.
6) Appena registrati è consigliato presentarsi nel forum dedicato.
La non osservanza delle regole porta a provvedimenti di vari tipo da parte dello staff, in particolare la non osservanza della regola 5 porta alla cancellazione del post e alla segnalazione dell'utente. In caso di recidività l'utente rischia il ban temporaneo.
-
sunreal
- Master
- Messaggi: 1599
- Iscritto il: dom 10 apr 2005, 0:00
- Slackware: 14.1
- Desktop: kde
- Località: P.P.P.
Re: Dopo installazione grub2 X non parte
AGGIORNAMENTO:
ho disinstallato i driver nvidia. Reinstallato mesa, i cui header ho letto qui sul forum vengono "piallati" da nvidia, ridato i comandi:
grub-mkconfig -o /boot/grub/grub.cfg
grub-install /dev/sdb
riavviato ..... etvoilà funziona.
Addirittura dopo la rimozione dei driver nvidia la risoluizone del desktop era molto grossolana, dopo il riavvio sembra quasi che gli nvidia siano installati, tant'è che ho dato glxgears e le "rotelle" girano! Anche se a 48FPS anzichè a 60
Ora...
Chi "governa" la mia scheda grafica? Visto che non sto usando l'accelerazione del processore (il monitor è attaccato alla scheda grafica (GTX 760)
Vorrei comunque installare i driver nvidia c'è qualche accortezza da usare per non arrecare problemi a grub?
Grazie
ho disinstallato i driver nvidia. Reinstallato mesa, i cui header ho letto qui sul forum vengono "piallati" da nvidia, ridato i comandi:
grub-mkconfig -o /boot/grub/grub.cfg
grub-install /dev/sdb
riavviato ..... etvoilà funziona.
Addirittura dopo la rimozione dei driver nvidia la risoluizone del desktop era molto grossolana, dopo il riavvio sembra quasi che gli nvidia siano installati, tant'è che ho dato glxgears e le "rotelle" girano! Anche se a 48FPS anzichè a 60
Ora...
Chi "governa" la mia scheda grafica? Visto che non sto usando l'accelerazione del processore (il monitor è attaccato alla scheda grafica (GTX 760)
Vorrei comunque installare i driver nvidia c'è qualche accortezza da usare per non arrecare problemi a grub?
Grazie
-
sunreal
- Master
- Messaggi: 1599
- Iscritto il: dom 10 apr 2005, 0:00
- Slackware: 14.1
- Desktop: kde
- Località: P.P.P.
Re: Dopo installazione grub2 X non parte
Ciao, allora? niente?
Quando posto in qualche forum e non ci osno risposte mi pongo sempre queste domande:
Domanda scema?
Domanda trattata mille volte?
Non si capisce quello che c'è scritto?
Troppe poche informazioni?
Nessuno sa di cosa parlo?
Siccome su slacky questa cosa non mi è mai successa, sono un po, preoccupato. Accetto qualsiasi risposta anche sui buchi neri, così tanto per non sentirmi solo.
Ma se le mancate risposte fossero la conseguenza di uno dei punti sopra citati, mi piacerebbe saperlo.
Ma non è sicuramente per l' nadamento di questo post che cambierò idea, slacky.eu numero 1 dei forum dove chiedere info.
Ciao ciao
Quando posto in qualche forum e non ci osno risposte mi pongo sempre queste domande:
Domanda scema?
Domanda trattata mille volte?
Non si capisce quello che c'è scritto?
Troppe poche informazioni?
Nessuno sa di cosa parlo?
Siccome su slacky questa cosa non mi è mai successa, sono un po, preoccupato. Accetto qualsiasi risposta anche sui buchi neri, così tanto per non sentirmi solo.
Ma se le mancate risposte fossero la conseguenza di uno dei punti sopra citati, mi piacerebbe saperlo.
Ma non è sicuramente per l' nadamento di questo post che cambierò idea, slacky.eu numero 1 dei forum dove chiedere info.
Ciao ciao
-
conraid
- Staff
- Messaggi: 13630
- Iscritto il: gio 14 lug 2005, 0:00
- Nome Cognome: Corrado Franco
- Slackware: current64
- Desktop: kde
- Località: Livorno
- Contatta:
Re: Dopo installazione grub2 X non parte
su grub non so che dirti, sul resto mi par di capire che è scheda dedicata e non è un notebook, ma specificalo.
per guardare i driver cerca nei log di X, può usare i driver i nouveau per esempio.
per guardare i driver cerca nei log di X, può usare i driver i nouveau per esempio.
:cf-
pino
- Linux 3.x
- Messaggi: 591
- Iscritto il: ven 18 gen 2008, 15:34
- Nome Cognome: Pino
- Slackware: 14
- Desktop: kde
- Località: Torino
Re: Dopo installazione grub2 X non parte
Ho appena installato ad un amico la 14.1 su un assemblato con grafica nvidia GeForce 6150SE.
Il driver nvidia funziona senza problemi, prelevato direttamente dal sito di nvidia.
Ma non ho mai usato grub quindi nulla ne so
Il driver nvidia funziona senza problemi, prelevato direttamente dal sito di nvidia.
Ma non ho mai usato grub quindi nulla ne so
Sulla scheda sopra, con i nouveau dopo qualche secondo la grafica crolla e rimane un bel monitor a strisce bluconraid ha scritto: può usare i driver i nouveau per esempio.
-
sunreal
- Master
- Messaggi: 1599
- Iscritto il: dom 10 apr 2005, 0:00
- Slackware: 14.1
- Desktop: kde
- Località: P.P.P.
Re: Dopo installazione grub2 X non parte
Allora il pc non è un portatile con una GTX760, da quello che si può capire dal log di xorg sono i noveau a gestire la grafica, ecco l' output:
devo dire che funzionano egregiamente senza problemi.
Mi pare di capire che non usate grub, usate lilo?
Grazie
Ciao
Codice: Seleziona tutto
[ 38.834]
X.Org X Server 1.14.3
Release Date: 2013-09-12
[ 38.835] X Protocol Version 11, Revision 0
[ 38.835] Build Operating System: Slackware 14.1 Slackware Linux Project
[ 38.835] Current Operating System: Linux leone 3.10.17 #2 SMP Wed Oct 23 16:34:38 CDT 2013 x86_64
[ 38.835] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-huge-3.10.17 root=/dev/sdb3 ro
[ 38.836] Build Date: 09 October 2013 08:27:11PM
[ 38.836]
[ 38.837] Current version of pixman: 0.30.2
[ 38.837] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 38.837] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 38.839] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 14 08:27:22 2015
[ 38.840] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 38.841] (==) No Layout section. Using the first Screen section.
[ 38.841] (==) No screen section available. Using defaults.
[ 38.841] (**) |-->Screen "Default Screen Section" (0)
[ 38.841] (**) | |-->Monitor "<default monitor>"
[ 38.841] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 38.841] (==) Automatically adding devices
[ 38.841] (==) Automatically enabling devices
[ 38.841] (==) Automatically adding GPU devices
[ 38.841] (WW) The directory "/usr/share/fonts/local" does not exist.
[ 38.841] Entry deleted from font path.
[ 38.841] (WW) The directory "/usr/share/fonts/CID" does not exist.
[ 38.841] Entry deleted from font path.
[ 38.843] (==) FontPath set to:
/usr/share/fonts/TTF,
/usr/share/fonts/OTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi/:unscaled,
/usr/share/fonts/100dpi/:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi,
/usr/share/fonts/cyrillic
[ 38.843] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 38.843] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 38.843] (II) Loader magic: 0x7f6d20
[ 38.843] (II) Module ABI versions:
[ 38.843] X.Org ANSI C Emulation: 0.4
[ 38.843] X.Org Video Driver: 14.1
[ 38.843] X.Org XInput driver : 19.1
[ 38.843] X.Org Server Extension : 7.0
[ 38.843] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 38.844] (--) PCI:*(0:1:0:0) 10de:1187:1043:8472 rev 161, Mem @ 0xf6000000/16777216, 0xe8000000/134217728, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 38.844] (II) Open ACPI successful (/var/run/acpid.socket)
[ 38.844] Initializing built-in extension Generic Event Extension
[ 38.845] Initializing built-in extension SHAPE
[ 38.845] Initializing built-in extension MIT-SHM
[ 38.845] Initializing built-in extension XInputExtension
[ 38.846] Initializing built-in extension XTEST
[ 38.846] Initializing built-in extension BIG-REQUESTS
[ 38.846] Initializing built-in extension SYNC
[ 38.847] Initializing built-in extension XKEYBOARD
[ 38.847] Initializing built-in extension XC-MISC
[ 38.847] Initializing built-in extension XINERAMA
[ 38.847] Initializing built-in extension XFIXES
[ 38.848] Initializing built-in extension RENDER
[ 38.848] Initializing built-in extension RANDR
[ 38.848] Initializing built-in extension COMPOSITE
[ 38.849] Initializing built-in extension DAMAGE
[ 38.849] Initializing built-in extension MIT-SCREEN-SAVER
[ 38.849] Initializing built-in extension DOUBLE-BUFFER
[ 38.850] Initializing built-in extension RECORD
[ 38.850] Initializing built-in extension DPMS
[ 38.850] Initializing built-in extension X-Resource
[ 38.850] Initializing built-in extension XVideo
[ 38.851] Initializing built-in extension XVideo-MotionCompensation
[ 38.851] Initializing built-in extension XFree86-VidModeExtension
[ 38.851] Initializing built-in extension XFree86-DGA
[ 38.852] Initializing built-in extension XFree86-DRI
[ 38.852] Initializing built-in extension DRI2
[ 38.852] (II) LoadModule: "glx"
[ 38.853] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 38.854] (II) Module glx: vendor="X.Org Foundation"
[ 38.854] compiled for 1.14.3, module version = 1.0.0
[ 38.854] ABI class: X.Org Server Extension, version 7.0
[ 38.854] (==) AIGLX enabled
[ 38.855] Loading extension GLX
[ 38.855] (==) Matched nouveau as autoconfigured driver 0
[ 38.855] (==) Matched nv as autoconfigured driver 1
[ 38.855] (==) Matched nouveau as autoconfigured driver 2
[ 38.855] (==) Matched nv as autoconfigured driver 3
[ 38.855] (==) Matched vesa as autoconfigured driver 4
[ 38.855] (==) Matched modesetting as autoconfigured driver 5
[ 38.855] (==) Matched fbdev as autoconfigured driver 6
[ 38.855] (==) Assigned the driver to the xf86ConfigLayout
[ 38.855] (II) LoadModule: "nouveau"
[ 38.855] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so
[ 38.856] (II) Module nouveau: vendor="X.Org Foundation"
[ 38.856] compiled for 1.14.2, module version = 1.0.9
[ 38.856] Module class: X.Org Video Driver
[ 38.856] ABI class: X.Org Video Driver, version 14.1
[ 38.856] (II) LoadModule: "nv"
[ 38.856] (II) Loading /usr/lib64/xorg/modules/drivers/nv_drv.so
[ 38.857] (II) Module nv: vendor="X.Org Foundation"
[ 38.857] compiled for 1.14.2, module version = 2.1.20
[ 38.857] Module class: X.Org Video Driver
[ 38.857] ABI class: X.Org Video Driver, version 14.1
[ 38.857] (II) LoadModule: "vesa"
[ 38.857] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[ 38.858] (II) Module vesa: vendor="X.Org Foundation"
[ 38.858] compiled for 1.14.3, module version = 2.3.3
[ 38.858] Module class: X.Org Video Driver
[ 38.858] ABI class: X.Org Video Driver, version 14.1
[ 38.858] (II) LoadModule: "modesetting"
[ 38.858] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 38.858] (II) Module modesetting: vendor="X.Org Foundation"
[ 38.858] compiled for 1.14.2, module version = 0.8.0
[ 38.858] Module class: X.Org Video Driver
[ 38.858] ABI class: X.Org Video Driver, version 14.1
[ 38.858] (II) LoadModule: "fbdev"
[ 38.858] (WW) Warning, couldn't open module fbdev
[ 38.858] (II) UnloadModule: "fbdev"
[ 38.858] (II) Unloading fbdev
[ 38.858] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 38.858] (II) NOUVEAU driver
[ 38.858] (II) NOUVEAU driver for NVIDIA chipset families :
[ 38.858] RIVA TNT (NV04)
[ 38.858] RIVA TNT2 (NV05)
[ 38.858] GeForce 256 (NV10)
[ 38.858] GeForce 2 (NV11, NV15)
[ 38.858] GeForce 4MX (NV17, NV18)
[ 38.858] GeForce 3 (NV20)
[ 38.858] GeForce 4Ti (NV25, NV28)
[ 38.858] GeForce FX (NV3x)
[ 38.858] GeForce 6 (NV4x)
[ 38.858] GeForce 7 (G7x)
[ 38.858] GeForce 8 (G8x)
[ 38.859] GeForce GTX 200 (NVA0)
[ 38.859] GeForce GTX 400 (NVC0)
[ 38.859] (II) NOUVEAU driver
[ 38.859] (II) NOUVEAU driver for NVIDIA chipset families :
[ 38.859] RIVA TNT (NV04)
[ 38.859] RIVA TNT2 (NV05)
[ 38.859] GeForce 256 (NV10)
[ 38.859] GeForce 2 (NV11, NV15)
[ 38.859] GeForce 4MX (NV17, NV18)
[ 38.859] GeForce 3 (NV20)
[ 38.859] GeForce 4Ti (NV25, NV28)
[ 38.859] GeForce FX (NV3x)
[ 38.859] GeForce 6 (NV4x)
[ 38.859] GeForce 7 (G7x)
[ 38.859] GeForce 8 (G8x)
[ 38.859] GeForce GTX 200 (NVA0)
[ 38.859] GeForce GTX 400 (NVC0)
[ 38.859] (II) VESA: driver for VESA chipsets: vesa
[ 38.859] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 38.859] (--) using VT number 7
[ 38.861] (II) [drm] nouveau interface version: 1.1.1
[ 38.861] (WW) Falling back to old probe method for vesa
[ 38.861] (WW) Falling back to old probe method for modesetting
[ 38.861] (II) Loading sub module "dri2"
[ 38.861] (II) LoadModule: "dri2"
[ 38.861] (II) Module "dri2" already built-in
[ 38.861] (--) NOUVEAU(0): Chipset: "NVIDIA NVE4"
[ 38.861] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 38.861] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 38.861] (==) NOUVEAU(0): RGB weight 888
[ 38.861] (==) NOUVEAU(0): Default visual is TrueColor
[ 38.861] (==) NOUVEAU(0): Using HW cursor
[ 38.861] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 38.861] (==) NOUVEAU(0): Page flipping enabled
[ 38.861] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 38.887] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[ 38.917] (II) NOUVEAU(0): Output DVI-D-1 has no monitor section
[ 38.919] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[ 38.983] (II) NOUVEAU(0): Output DP-1 has no monitor section
[ 39.006] (II) NOUVEAU(0): EDID for output DVI-I-1
[ 39.035] (II) NOUVEAU(0): EDID for output DVI-D-1
[ 39.035] (II) NOUVEAU(0): Manufacturer: PHL Model: 867 Serial#: 19517
[ 39.035] (II) NOUVEAU(0): Year: 2008 Week: 23
[ 39.035] (II) NOUVEAU(0): EDID Version: 1.3
[ 39.035] (II) NOUVEAU(0): Digital Display Input
[ 39.035] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 52 vert.: 32
[ 39.035] (II) NOUVEAU(0): Gamma: 2.20
[ 39.035] (II) NOUVEAU(0): DPMS capabilities: Off
[ 39.035] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 39.035] (II) NOUVEAU(0): Default color space is primary color space
[ 39.035] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 39.035] (II) NOUVEAU(0): redX: 0.640 redY: 0.340 greenX: 0.290 greenY: 0.610
[ 39.035] (II) NOUVEAU(0): blueX: 0.140 blueY: 0.070 whiteX: 0.310 whiteY: 0.320
[ 39.035] (II) NOUVEAU(0): Supported established timings:
[ 39.035] (II) NOUVEAU(0): 720x400@70Hz
[ 39.035] (II) NOUVEAU(0): 640x480@60Hz
[ 39.035] (II) NOUVEAU(0): 640x480@67Hz
[ 39.035] (II) NOUVEAU(0): 640x480@72Hz
[ 39.035] (II) NOUVEAU(0): 640x480@75Hz
[ 39.035] (II) NOUVEAU(0): 800x600@56Hz
[ 39.035] (II) NOUVEAU(0): 800x600@60Hz
[ 39.035] (II) NOUVEAU(0): 800x600@72Hz
[ 39.035] (II) NOUVEAU(0): 800x600@75Hz
[ 39.035] (II) NOUVEAU(0): 832x624@75Hz
[ 39.035] (II) NOUVEAU(0): 1024x768@60Hz
[ 39.035] (II) NOUVEAU(0): 1024x768@70Hz
[ 39.035] (II) NOUVEAU(0): 1024x768@75Hz
[ 39.035] (II) NOUVEAU(0): 1280x1024@75Hz
[ 39.035] (II) NOUVEAU(0): 1152x864@75Hz
[ 39.035] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 39.035] (II) NOUVEAU(0): Supported standard timings:
[ 39.035] (II) NOUVEAU(0): #0: hsize: 1152 vsize 864 refresh: 60 vid: 16497
[ 39.035] (II) NOUVEAU(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 39.035] (II) NOUVEAU(0): #2: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 39.035] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 39.035] (II) NOUVEAU(0): #4: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 39.035] (II) NOUVEAU(0): #5: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 39.035] (II) NOUVEAU(0): #6: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 39.035] (II) NOUVEAU(0): #7: hsize: 1920 vsize 1200 refresh: 60 vid: 209
[ 39.035] (II) NOUVEAU(0): Supported detailed timing:
[ 39.035] (II) NOUVEAU(0): clock: 154.0 MHz Image Size: 519 x 324 mm
[ 39.035] (II) NOUVEAU(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 39.035] (II) NOUVEAU(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0
[ 39.035] (II) NOUVEAU(0): Serial No: FE10823195178
[ 39.035] (II) NOUVEAU(0): Monitor name: Philips 240BW
[ 39.035] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[ 39.035] (II) NOUVEAU(0): EDID (in hex):
[ 39.035] (II) NOUVEAU(0): 00ffffffffffff00410c67083d4c0000
[ 39.035] (II) NOUVEAU(0): 17120103803420782ec5c4a3574a9c23
[ 39.035] (II) NOUVEAU(0): 124f52bfef807140814081c09500950f
[ 39.035] (II) NOUVEAU(0): a940b300d100283c80a070b023403020
[ 39.035] (II) NOUVEAU(0): 360007442100001e000000ff00464531
[ 39.035] (II) NOUVEAU(0): 30383233313935313738000000fc0050
[ 39.035] (II) NOUVEAU(0): 68696c697073203234304257000000fd
[ 39.035] (II) NOUVEAU(0): 00384c1e5311000a2020202020200085
[ 39.035] (II) NOUVEAU(0): Printing probed modes for output DVI-D-1
[ 39.035] (II) NOUVEAU(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync +vsync (74.0 kHz eP)
[ 39.036] (II) NOUVEAU(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 39.036] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 39.036] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 39.036] (II) NOUVEAU(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 39.036] (II) NOUVEAU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 39.036] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 39.036] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 39.036] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.58 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz)
[ 39.036] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 39.036] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 39.036] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 39.036] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 39.036] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 39.036] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 39.036] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 39.036] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 39.036] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 39.036] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 39.036] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 39.036] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 39.036] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 39.036] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 39.038] (II) NOUVEAU(0): EDID for output HDMI-1
[ 39.102] (II) NOUVEAU(0): EDID for output DP-1
[ 39.102] (II) NOUVEAU(0): Output DVI-I-1 disconnected
[ 39.102] (II) NOUVEAU(0): Output DVI-D-1 connected
[ 39.102] (II) NOUVEAU(0): Output HDMI-1 disconnected
[ 39.102] (II) NOUVEAU(0): Output DP-1 disconnected
[ 39.102] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 39.102] (II) NOUVEAU(0): Output DVI-D-1 using initial mode 1920x1200
[ 39.102] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 39.102] (--) NOUVEAU(0): Virtual size is 1920x1200 (pitch 0)
[ 39.102] (**) NOUVEAU(0): Driver mode "1920x1200": 154.0 MHz (scaled from 0.0 MHz), 74.0 kHz, 60.0 Hz
[ 39.102] (II) NOUVEAU(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync +vsync (74.0 kHz eP)
[ 39.102] (**) NOUVEAU(0): Driver mode "1600x1200": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
[ 39.102] (II) NOUVEAU(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 39.102] (**) NOUVEAU(0): Driver mode "1680x1050": 119.0 MHz (scaled from 0.0 MHz), 64.7 kHz, 59.9 Hz
[ 39.102] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 39.102] (**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[ 39.102] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 39.102] (**) NOUVEAU(0): Driver mode "1440x900": 136.8 MHz (scaled from 0.0 MHz), 70.6 kHz, 75.0 Hz
[ 39.102] (II) NOUVEAU(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 39.102] (**) NOUVEAU(0): Driver mode "1440x900": 88.8 MHz (scaled from 0.0 MHz), 55.5 kHz, 59.9 Hz
[ 39.102] (II) NOUVEAU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 39.102] (**) NOUVEAU(0): Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
[ 39.102] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 39.102] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[ 39.102] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 39.102] (**) NOUVEAU(0): Mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
[ 39.102] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.58 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz)
[ 39.102] (**) NOUVEAU(0): Mode "1280x720": 74.4 MHz (scaled from 0.0 MHz), 44.7 kHz, 60.0 Hz
[ 39.102] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 39.102] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[ 39.102] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 39.102] (**) NOUVEAU(0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[ 39.102] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 39.102] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 39.102] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 39.102] (**) NOUVEAU(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[ 39.102] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 39.102] (**) NOUVEAU(0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[ 39.102] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 39.102] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[ 39.102] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 39.102] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 39.102] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 39.102] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 39.102] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 39.102] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[ 39.102] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 39.102] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[ 39.102] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 39.102] (**) NOUVEAU(0): Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[ 39.102] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 39.102] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 39.102] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 39.102] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 39.102] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 39.102] (==) NOUVEAU(0): DPI set to (96, 96)
[ 39.102] (II) Loading sub module "fb"
[ 39.102] (II) LoadModule: "fb"
[ 39.102] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 39.104] (II) Module fb: vendor="X.Org Foundation"
[ 39.104] compiled for 1.14.3, module version = 1.0.0
[ 39.104] ABI class: X.Org ANSI C Emulation, version 0.4
[ 39.104] (II) Loading sub module "exa"
[ 39.104] (II) LoadModule: "exa"
[ 39.104] (II) Loading /usr/lib64/xorg/modules/libexa.so
[ 39.105] (II) Module exa: vendor="X.Org Foundation"
[ 39.105] compiled for 1.14.3, module version = 2.6.0
[ 39.105] ABI class: X.Org Video Driver, version 14.1
[ 39.105] (II) Loading sub module "shadowfb"
[ 39.105] (II) LoadModule: "shadowfb"
[ 39.105] (II) Loading /usr/lib64/xorg/modules/libshadowfb.so
[ 39.105] (II) Module shadowfb: vendor="X.Org Foundation"
[ 39.105] compiled for 1.14.3, module version = 1.0.0
[ 39.105] ABI class: X.Org ANSI C Emulation, version 0.4
[ 39.105] (II) UnloadModule: "nv"
[ 39.105] (II) Unloading nv
[ 39.105] (II) UnloadModule: "vesa"
[ 39.105] (II) Unloading vesa
[ 39.105] (II) UnloadModule: "modesetting"
[ 39.105] (II) Unloading modesetting
[ 39.105] (--) Depth 24 pixmap format is 32 bpp
[ 39.109] (II) NOUVEAU(0): Opened GPU channel 0
[ 39.114] (II) NOUVEAU(0): [DRI2] Setup complete
[ 39.114] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 39.114] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 39.115] (II) EXA(0): Driver allocated offscreen pixmaps
[ 39.115] (II) EXA(0): Driver registered support for the following operations:
[ 39.115] (II) Solid
[ 39.115] (II) Copy
[ 39.115] (II) Composite (RENDER acceleration)
[ 39.115] (II) UploadToScreen
[ 39.115] (II) DownloadFromScreen
[ 39.115] (==) NOUVEAU(0): Backing store disabled
[ 39.115] (==) NOUVEAU(0): Silken mouse enabled
[ 39.115] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 39.115] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 39.115] (==) NOUVEAU(0): DPMS enabled
[ 39.115] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 39.115] (--) RandR disabled
[ 39.153] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 39.153] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 39.153] (II) AIGLX: enabled GLX_ARB_create_context
[ 39.153] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 39.153] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 39.153] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 39.153] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 39.153] (II) AIGLX: Loaded and initialized nouveau
[ 39.153] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 39.154] (II) NOUVEAU(0): NVEnterVT is called.
[ 39.184] (II) NOUVEAU(0): Setting screen physical size to 508 x 317
[ 39.184] resize called 1920 1200
[ 39.240] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 39.240] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 39.240] (**) Power Button: Applying InputClass "keyboard-all"
[ 39.240] (II) LoadModule: "evdev"
[ 39.240] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 39.241] (II) Module evdev: vendor="X.Org Foundation"
[ 39.241] compiled for 1.14.3, module version = 2.8.2
[ 39.241] Module class: X.Org XInput Driver
[ 39.241] ABI class: X.Org XInput driver, version 19.1
[ 39.241] (II) Using input driver 'evdev' for 'Power Button'
[ 39.241] (**) Power Button: always reports core events
[ 39.241] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 39.241] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 39.241] (--) evdev: Power Button: Found keys
[ 39.241] (II) evdev: Power Button: Configuring as keyboard
[ 39.241] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 39.241] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 39.241] (**) Option "xkb_rules" "evdev"
[ 39.241] (**) Option "xkb_model" "pc104"
[ 39.241] (**) Option "xkb_layout" "us"
[ 39.241] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 39.252] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 39.252] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 39.252] (**) Power Button: Applying InputClass "keyboard-all"
[ 39.252] (II) Using input driver 'evdev' for 'Power Button'
[ 39.252] (**) Power Button: always reports core events
[ 39.252] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 39.252] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 39.252] (--) evdev: Power Button: Found keys
[ 39.252] (II) evdev: Power Button: Configuring as keyboard
[ 39.252] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 39.252] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 39.252] (**) Option "xkb_rules" "evdev"
[ 39.252] (**) Option "xkb_model" "pc104"
[ 39.252] (**) Option "xkb_layout" "us"
[ 39.252] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 39.252] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 39.252] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event11)
[ 39.252] (II) No input driver specified, ignoring this device.
[ 39.252] (II) This device may have been added with another device file.
[ 39.252] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event12)
[ 39.252] (II) No input driver specified, ignoring this device.
[ 39.252] (II) This device may have been added with another device file.
[ 39.252] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event13)
[ 39.252] (II) No input driver specified, ignoring this device.
[ 39.252] (II) This device may have been added with another device file.
[ 39.252] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event14)
[ 39.252] (II) No input driver specified, ignoring this device.
[ 39.252] (II) This device may have been added with another device file.
[ 39.253] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event9)
[ 39.253] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 39.253] (**) Logitech USB Keyboard: Applying InputClass "keyboard-all"
[ 39.253] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 39.253] (**) Logitech USB Keyboard: always reports core events
[ 39.253] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event9"
[ 39.253] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[ 39.253] (--) evdev: Logitech USB Keyboard: Found keys
[ 39.253] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[ 39.253] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13:1.0/input/input9/event9"
[ 39.253] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 8)
[ 39.253] (**) Option "xkb_rules" "evdev"
[ 39.253] (**) Option "xkb_model" "pc104"
[ 39.253] (**) Option "xkb_layout" "us"
[ 39.253] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 39.253] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event10)
[ 39.253] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 39.253] (**) Logitech USB Keyboard: Applying InputClass "keyboard-all"
[ 39.253] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 39.253] (**) Logitech USB Keyboard: always reports core events
[ 39.253] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event10"
[ 39.253] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[ 39.253] (--) evdev: Logitech USB Keyboard: Found absolute axes
[ 39.253] (II) evdev: Logitech USB Keyboard: Forcing absolute x/y axes to exist.
[ 39.253] (--) evdev: Logitech USB Keyboard: Found keys
[ 39.253] (II) evdev: Logitech USB Keyboard: Forcing relative x/y axes to exist.
[ 39.253] (II) evdev: Logitech USB Keyboard: Configuring as mouse
[ 39.253] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[ 39.253] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13:1.1/input/input10/event10"
[ 39.253] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 9)
[ 39.253] (**) Option "xkb_rules" "evdev"
[ 39.253] (**) Option "xkb_model" "pc104"
[ 39.253] (**) Option "xkb_layout" "us"
[ 39.253] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 39.253] (II) evdev: Logitech USB Keyboard: initialized for absolute axes.
[ 39.253] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1
[ 39.253] (**) Logitech USB Keyboard: (accel) acceleration profile 0
[ 39.253] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000
[ 39.253] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4
[ 39.253] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event4)
[ 39.253] (II) No input driver specified, ignoring this device.
[ 39.253] (II) This device may have been added with another device file.
[ 39.253] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event5)
[ 39.253] (II) No input driver specified, ignoring this device.
[ 39.253] (II) This device may have been added with another device file.
[ 39.253] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event6)
[ 39.253] (II) No input driver specified, ignoring this device.
[ 39.253] (II) This device may have been added with another device file.
[ 39.253] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event7)
[ 39.253] (II) No input driver specified, ignoring this device.
[ 39.253] (II) This device may have been added with another device file.
[ 39.253] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event8)
[ 39.253] (II) No input driver specified, ignoring this device.
[ 39.253] (II) This device may have been added with another device file.
[ 39.253] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event3)
[ 39.254] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 39.254] (**) Eee PC WMI hotkeys: Applying InputClass "keyboard-all"
[ 39.254] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[ 39.254] (**) Eee PC WMI hotkeys: always reports core events
[ 39.254] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event3"
[ 39.254] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[ 39.254] (--) evdev: Eee PC WMI hotkeys: Found keys
[ 39.254] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[ 39.254] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input3/event3"
[ 39.254] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 10)
[ 39.254] (**) Option "xkb_rules" "evdev"
[ 39.254] (**) Option "xkb_model" "pc104"
[ 39.254] (**) Option "xkb_layout" "us"
[ 39.254] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 39.254] (II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/event15)
[ 39.254] (**) ImPS/2 Logitech Wheel Mouse: Applying InputClass "evdev pointer catchall"
[ 39.254] (II) Using input driver 'evdev' for 'ImPS/2 Logitech Wheel Mouse'
[ 39.254] (**) ImPS/2 Logitech Wheel Mouse: always reports core events
[ 39.254] (**) evdev: ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event15"
[ 39.254] (--) evdev: ImPS/2 Logitech Wheel Mouse: Vendor 0x2 Product 0x5
[ 39.254] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
[ 39.254] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
[ 39.254] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found relative axes
[ 39.254] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
[ 39.254] (II) evdev: ImPS/2 Logitech Wheel Mouse: Configuring as mouse
[ 39.254] (II) evdev: ImPS/2 Logitech Wheel Mouse: Adding scrollwheel support
[ 39.254] (**) evdev: ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
[ 39.254] (**) evdev: ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 39.254] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input15/event15"
[ 39.254] (II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE, id 11)
[ 39.254] (II) evdev: ImPS/2 Logitech Wheel Mouse: initialized for relative axes.
[ 39.254] (**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
[ 39.254] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration profile 0
[ 39.254] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration factor: 2.000
[ 39.254] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration threshold: 4
[ 39.254] (II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/mouse0)
[ 39.254] (II) No input driver specified, ignoring this device.
[ 39.254] (II) This device may have been added with another device file.
[ 39.254] (II) config/udev: Adding input device Speakup (/dev/input/event0)
[ 39.254] (**) Speakup: Applying InputClass "evdev keyboard catchall"
[ 39.254] (**) Speakup: Applying InputClass "keyboard-all"
[ 39.254] (II) Using input driver 'evdev' for 'Speakup'
[ 39.254] (**) Speakup: always reports core events
[ 39.254] (**) evdev: Speakup: Device: "/dev/input/event0"
[ 39.254] (--) evdev: Speakup: Vendor 0 Product 0
[ 39.254] (--) evdev: Speakup: Found keys
[ 39.254] (II) evdev: Speakup: Configuring as keyboard
[ 39.254] (**) Option "config_info" "udev:/sys/devices/virtual/input/input0/event0"
[ 39.254] (II) XINPUT: Adding extended input device "Speakup" (type: KEYBOARD, id 12)
[ 39.254] (**) Option "xkb_rules" "evdev"
[ 39.254] (**) Option "xkb_model" "pc104"
[ 39.254] (**) Option "xkb_layout" "us"
[ 39.254] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 40.271] (II) NOUVEAU(0): EDID vendor "PHL", prod id 2151
[ 40.271] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[ 40.271] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[ 40.271] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 40.271] (II) NOUVEAU(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync +vsync (74.0 kHz eP)
[ 40.271] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 40.271] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 40.271] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 40.271] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 40.271] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 40.271] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 40.271] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 40.271] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 40.271] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 40.271] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 40.271] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 40.271] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 40.271] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 40.271] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 40.271] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 40.271] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz e)
[ 40.271] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 40.271] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 40.271] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 40.271] (II) NOUVEAU(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 40.271] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 40.271] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 40.271] (II) NOUVEAU(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz e)
[ 41.298] (II) NOUVEAU(0): EDID vendor "PHL", prod id 2151
[ 41.298] (II) NOUVEAU(0): Using hsync ranges from config file
[ 41.298] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 41.298] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 41.298] (II) NOUVEAU(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync +vsync (74.0 kHz eP)
[ 41.298] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 41.298] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 41.298] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 41.298] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 41.298] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 41.298] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 41.298] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 41.298] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 41.298] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 41.298] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 41.298] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 41.298] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 41.298] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 41.298] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 41.298] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 41.298] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz e)
[ 41.298] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 41.298] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 41.298] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 41.298] (II) NOUVEAU(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 41.298] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 41.298] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 41.298] (II) NOUVEAU(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz e)
[ 44.994] (II) NOUVEAU(0): EDID vendor "PHL", prod id 2151
[ 44.994] (II) NOUVEAU(0): Using hsync ranges from config file
[ 44.994] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 44.994] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 44.994] (II) NOUVEAU(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync +vsync (74.0 kHz eP)
[ 44.994] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 44.994] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 44.994] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 44.994] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 44.994] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 44.994] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 44.994] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 44.994] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 44.994] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 44.994] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 44.994] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 44.994] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 44.994] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 44.994] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 44.994] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 44.994] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz e)
[ 44.994] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 44.994] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 44.994] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 44.994] (II) NOUVEAU(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 44.994] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 44.994] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 44.994] (II) NOUVEAU(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz e)
Mi pare di capire che non usate grub, usate lilo?
Grazie
Ciao
-
brg
- Linux 3.x
- Messaggi: 580
- Iscritto il: sab 12 mar 2011, 14:20
- Slackware: 15.0
- Kernel: 5.15.117
- Desktop: KDE5
- Località: Montecatini
- Contatta:
Re: Dopo installazione grub2 X non parte
Io sul fisso uso Slackware64 14.1 con grub2 e tutto funziona correttamente. Probabilmente ti mancava qualche opzione del kernel. A lavoro uso refind perché ho un pc dual boot windows 10 e Ubuntu 14.04, ma non te lo consiglio. Se hai un solo sistema operativo su un unico disco fisso, lilo va più che bene, tuttavia non è più attivamente sviluppato e probabilmente nemmeno Slackware continuerà ad usarlo in futuro.
Per quanto riguarda i driver, i nouveau vanno bene se non hai bisogno di accelerazione 3d (es. per i giochi), per il resto funzionano molto bene. Se vuoi sapere che driver hai installati, è meglio lanciare glxinfo che glxgears. Quest'ultimo funziona sempre a meno che non ci siano errori nell'installazione dei driver, come ad esempio nel caso in cui tu usi un po' di file dei driver Nvidia e un po' dei Nouveau.
Per quanto riguarda i driver, i nouveau vanno bene se non hai bisogno di accelerazione 3d (es. per i giochi), per il resto funzionano molto bene. Se vuoi sapere che driver hai installati, è meglio lanciare glxinfo che glxgears. Quest'ultimo funziona sempre a meno che non ci siano errori nell'installazione dei driver, come ad esempio nel caso in cui tu usi un po' di file dei driver Nvidia e un po' dei Nouveau.