questo è il dmesg ,gli errori sono alla fine ma posto tutto perchè magari c'è qualcosa degno di nota anche nella prima parte
Codice: Seleziona tutto
root@Slack:~# dmesg
ause of resource collisions
PCI: Device 0000:00:1c.1 not available because of resource collisions
PCI: Device 0000:00:1c.2 not available because of resource collisions
vesafb: framebuffer at 0xd0000000, mapped to 0xe0a80000, using 3072k, total 16384k
vesafb: mode is 1024x768x16, linelength=2048, pages=9
vesafb: protected mode interface info at c000:ad8c
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:5:5, shift=0:10:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
fb1: VGA16 VGA frame buffer device
ACPI: AC Adapter [ACAD] (off-line)
ACPI: Battery Slot [BAT1] (battery absent)
ACPI: Battery Slot [BAT2] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
acpi_processor-0521 [30] acpi_processor_get_inf: Error getting cpuindex for acpiid 0x1
ACPI: Thermal Zone [THRM] (57 C)
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
acpi_bus-0212 [58] acpi_bus_set_power : Device is not power manageable
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1e.3[B] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt for device 0000:00:1e.3 disabled
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
loop: loaded (max 8 devices)
pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com
e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH6: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
ICH6: chipset revision 4
ICH6: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x18c0-0x18c7, BIOS settings: hda:DMA, hdb:DMA
Probing IDE interface ide0...
hda: TOSHIBA MK8025GAS, ATA DISK drive
hdb: MATSHITAUJ-840D, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB), CHS=65535/16/63, UDMA(33)
hda: cache flushes supported
hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 > hda4
hdb: ATAPI 63X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
libata version 1.12 loaded.
ohci1394: $Rev: 1299 $ Ben Collins <bcollins@debian.org>
ACPI: PCI Interrupt 0000:06:01.2[A] -> Link [LNKG] -> GSI 10 (level, low) -> IRQ 10
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[c8217000-c82177ff] Max Packet=[2048]
ieee1394: raw1394: /dev/raw1394 device initialized
sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
ieee1394: Loaded CMP driver
ACPI: PCI Interrupt 0000:06:01.0[A] -> Link [LNKG] -> GSI 10 (level, low) -> IRQ 10
Yenta: CardBus bridge found at 0000:06:01.0 [1025:0066]
Yenta: ISA IRQ mask 0x08f8, PCI irq 10
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
pcmcia: parent PCI bridge Memory window: 0xc8200000 - 0xc82fffff
pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x21ffffff
usbmon: debugfs is not available
acpi_bus-0212 [58] acpi_bus_set_power : Device is not power manageable
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc8000000
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 10, io base 0x00001840
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 10, io base 0x00001860
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
sl811: driver sl811-hcd, 19 May 2005
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
mice: PS/2 mouse device common for all mice
Advanced Linux Sound Architecture Driver Version 1.0.9b (Thu Jul 28 12:20:13 2005 UTC).
ALSA device list:
No soundcards found.
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard on isa0060/serio0
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
IPv4 over IPv4 tunneling driver
ip_conntrack version 2.1 (4084 buckets, 32672 max) - 212 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
swsusp: Resume From Partition /dev/hda7
PM: Checking swsusp image.
swsusp: Suspend partition has wrong signature?
swsusp: Error -22 check for resume file
PM: Resume from disk failed.
ACPI wakeup devices:
RP01 RP02 RP04 USB1 USB2 USB3 USB4 USB7 LANC MODM
ACPI: (supports S0 S3 S4 S5)
ReiserFS: hda4: found reiserfs format "3.6" with standard journal
Synaptics Touchpad, model: 1, fw: 5.9, id: 0x126eb1, caps: 0xa04713/0x4000
input: SynPS/2 Synaptics TouchPad on isa0060/serio1
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c09f000046d52f]
ReiserFS: hda4: using ordered data mode
ReiserFS: hda4: journal params: device hda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda4: checking transaction log (hda4)
ReiserFS: hda4: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 196k freed
Adding 208804k swap on /dev/hda7. Priority:-1 extents:1
Linux agpgart interface v0.101 (c) Dave Jones
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 428 MBytes.
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
[fglrx] module loaded - fglrx 8.16.20 [Aug 16 2005] on minor 0
tg3.c:v3.37 (August 25, 2005)
acpi_bus-0212 [60] acpi_bus_set_power : Device is not power manageable
ACPI: PCI Interrupt 0000:06:08.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
eth0: Tigon3 [partno(BCM95705A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:c0:9f:8a:cc:80
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1]
eth0: dma_rwctrl[763f0000]
acpi_bus-0212 [60] acpi_bus_set_power : Device is not power manageable
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1e.2[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1e.2 to 64
intel8x0_measure_ac97_clock: measured 54161 usecs
intel8x0: clocking to 48000
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: recovery directory /var/lib/nfs/v4recovery doesn't exist
NFSD: starting 90-second grace period
[fglrx] Maximum main memory to use for locked dma buffers: 428 MBytes.
[fglrx] free PCIe = 51118080
[fglrx] max PCIe = 51118080
[fglrx] free LFB = 119762944
[fglrx] max LFB = 119762944
[fglrx] free Inv = 0
[fglrx] max Inv = 0
[fglrx] total Inv = 0
[fglrx] total TIM = 0
[fglrx] total FB = 0
[fglrx] total PCIe = 16384
psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
dswexec-0457 [297] ds_exec_end_op : [Index]: Could not resolve operands, AE_NOT_FOUND
psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [289] acpi_battery_get_statu: Error evaluating _BST
psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
dswexec-0457 [491] ds_exec_end_op : [Index]: Could not resolve operands, AE_NOT_FOUND
psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [483] acpi_battery_get_statu: Error evaluating _BST
synaptics: using relaxed packet validation
psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
dswexec-0457 [693] ds_exec_end_op : [Index]: Could not resolve operands, AE_NOT_FOUND
psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [685] acpi_battery_get_statu: Error evaluating _BST
psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
dswexec-0457 [898] ds_exec_end_op : [Index]: Could not resolve operands, AE_NOT_FOUND
psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [890] acpi_battery_get_statu: Error evaluating _BST
psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
dswexec-0457 [1118] ds_exec_end_op : [Index]: Could not resolve operands, AE_NOT_FOUND
psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [1110] acpi_battery_get_statu: Error evaluating _BST
psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
dswexec-0457 [1277] ds_exec_end_op : [Index]: Could not resolve operands, AE_NOT_FOUND
psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [1269] acpi_battery_get_statu: Error evaluating _BST
psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
dswexec-0457 [1496] ds_exec_end_op : [Index]: Could not resolve operands, AE_NOT_FOUND
psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [1488] acpi_battery_get_statu: Error evaluating _BST
psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
dswexec-0457 [1714] ds_exec_end_op : [Index]: Could not resolve operands, AE_NOT_FOUND
psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [1706] acpi_battery_get_statu: Error evaluating _BST
psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
dswexec-0457 [1918] ds_exec_end_op : [Index]: Could not resolve operands, AE_NOT_FOUND
psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [1910] acpi_battery_get_statu: Error evaluating _BST
psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
dswexec-0457 [2126] ds_exec_end_op : [Index]: Could not resolve operands, AE_NOT_FOUND
psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [2118] acpi_battery_get_statu: Error evaluating _BST
psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
dswexec-0457 [2283] ds_exec_end_op : [Index]: Could not resolve operands, AE_NOT_FOUND
psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [2275] acpi_battery_get_statu: Error evaluating _BST
psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
dswexec-0457 [2511] ds_exec_end_op : [Index]: Could not resolve operands, AE_NOT_FOUND
psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [2503] acpi_battery_get_statu: Error evaluating _BST
psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
dswexec-0457 [2721] ds_exec_end_op : [Index]: Could not resolve operands, AE_NOT_FOUND
psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [2713] acpi_battery_get_statu: Error evaluating _BST
root@Slack:~# dmesg
00:00:1e.3[B] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt for device 0000:00:1e.3 disabled
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
loop: loaded (max 8 devices)
pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com
e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH6: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
ICH6: chipset revision 4
ICH6: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x18c0-0x18c7, BIOS settings: hda:DMA, hdb:DMA
Probing IDE interface ide0...
hda: TOSHIBA MK8025GAS, ATA DISK drive
hdb: MATSHITAUJ-840D, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB), CHS=65535/16/63, UDMA(33)
hda: cache flushes supported
hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 > hda4
hdb: ATAPI 63X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
libata version 1.12 loaded.
ohci1394: $Rev: 1299 $ Ben Collins <bcollins@debian.org>
ACPI: PCI Interrupt 0000:06:01.2[A] -> Link [LNKG] -> GSI 10 (level, low) -> IRQ 10
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[c8217000-c82177ff] Max Packet=[2048]
ieee1394: raw1394: /dev/raw1394 device initialized
sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
ieee1394: Loaded CMP driver
ACPI: PCI Interrupt 0000:06:01.0[A] -> Link [LNKG] -> GSI 10 (level, low) -> IRQ 10
Yenta: CardBus bridge found at 0000:06:01.0 [1025:0066]
Yenta: ISA IRQ mask 0x08f8, PCI irq 10
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
pcmcia: parent PCI bridge Memory window: 0xc8200000 - 0xc82fffff
pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x21ffffff
usbmon: debugfs is not available
acpi_bus-0212 [58] acpi_bus_set_power : Device is not power manageable
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc8000000
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 10, io base 0x00001840
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 10, io base 0x00001860
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
sl811: driver sl811-hcd, 19 May 2005
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
mice: PS/2 mouse device common for all mice
Advanced Linux Sound Architecture Driver Version 1.0.9b (Thu Jul 28 12:20:13 2005 UTC).
ALSA device list:
No soundcards found.
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard on isa0060/serio0
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
IPv4 over IPv4 tunneling driver
ip_conntrack version 2.1 (4084 buckets, 32672 max) - 212 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
swsusp: Resume From Partition /dev/hda7
PM: Checking swsusp image.
swsusp: Suspend partition has wrong signature?
swsusp: Error -22 check for resume file
PM: Resume from disk failed.
ACPI wakeup devices:
RP01 RP02 RP04 USB1 USB2 USB3 USB4 USB7 LANC MODM
ACPI: (supports S0 S3 S4 S5)
ReiserFS: hda4: found reiserfs format "3.6" with standard journal
Synaptics Touchpad, model: 1, fw: 5.9, id: 0x126eb1, caps: 0xa04713/0x4000
input: SynPS/2 Synaptics TouchPad on isa0060/serio1
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c09f000046d52f]
ReiserFS: hda4: using ordered data mode
ReiserFS: hda4: journal params: device hda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda4: checking transaction log (hda4)
ReiserFS: hda4: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 196k freed
Adding 208804k swap on /dev/hda7. Priority:-1 extents:1
Linux agpgart interface v0.101 (c) Dave Jones
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 428 MBytes.
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
[fglrx] module loaded - fglrx 8.16.20 [Aug 16 2005] on minor 0
tg3.c:v3.37 (August 25, 2005)
acpi_bus-0212 [60] acpi_bus_set_power : Device is not power manageable
ACPI: PCI Interrupt 0000:06:08.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
eth0: Tigon3 [partno(BCM95705A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:c0:9f:8a:cc:80
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1]
eth0: dma_rwctrl[763f0000]
acpi_bus-0212 [60] acpi_bus_set_power : Device is not power manageable
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1e.2[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1e.2 to 64
intel8x0_measure_ac97_clock: measured 54161 usecs
intel8x0: clocking to 48000
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: recovery directory /var/lib/nfs/v4recovery doesn't exist
NFSD: starting 90-second grace period
[fglrx] Maximum main memory to use for locked dma buffers: 428 MBytes.
[fglrx] free PCIe = 51118080
[fglrx] max PCIe = 51118080
[fglrx] free LFB = 119762944
[fglrx] max LFB = 119762944
[fglrx] free Inv = 0
[fglrx] max Inv = 0
[fglrx] total Inv = 0
[fglrx] total TIM = 0
[fglrx] total FB = 0
[fglrx] total PCIe = 16384
psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
dswexec-0457 [297] ds_exec_end_op : [Index]: Could not resolve operands, AE_NOT_FOUND
psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [289] acpi_battery_get_statu: Error evaluating _BST
psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
dswexec-0457 [491] ds_exec_end_op : [Index]: Could not resolve operands, AE_NOT_FOUND
psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [483] acpi_battery_get_statu: Error evaluating _BST
synaptics: using relaxed packet validation
psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
dswexec-0457 [693] ds_exec_end_op : [Index]: Could not resolve operands, AE_NOT_FOUND
psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [685] acpi_battery_get_statu: Error evaluating _BST
psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
dswexec-0457 [898] ds_exec_end_op : [Index]: Could not resolve operands, AE_NOT_FOUND
psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [890] acpi_battery_get_statu: Error evaluating _BST
psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
dswexec-0457 [1118] ds_exec_end_op : [Index]: Could not resolve operands, AE_NOT_FOUND
psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [1110] acpi_battery_get_statu: Error evaluating _BST
psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
dswexec-0457 [1277] ds_exec_end_op : [Index]: Could not resolve operands, AE_NOT_FOUND
psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [1269] acpi_battery_get_statu: Error evaluating _BST
psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
dswexec-0457 [1496] ds_exec_end_op : [Index]: Could not resolve operands, AE_NOT_FOUND
psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [1488] acpi_battery_get_statu: Error evaluating _BST
psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
dswexec-0457 [1714] ds_exec_end_op : [Index]: Could not resolve operands, AE_NOT_FOUND
psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [1706] acpi_battery_get_statu: Error evaluating _BST
psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
dswexec-0457 [1918] ds_exec_end_op : [Index]: Could not resolve operands, AE_NOT_FOUND
psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [1910] acpi_battery_get_statu: Error evaluating _BST
psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
dswexec-0457 [2126] ds_exec_end_op : [Index]: Could not resolve operands, AE_NOT_FOUND
psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [2118] acpi_battery_get_statu: Error evaluating _BST
psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
dswexec-0457 [2283] ds_exec_end_op : [Index]: Could not resolve operands, AE_NOT_FOUND
psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [2275] acpi_battery_get_statu: Error evaluating _BST
psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
dswexec-0457 [2511] ds_exec_end_op : [Index]: Could not resolve operands, AE_NOT_FOUND
psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [2503] acpi_battery_get_statu: Error evaluating _BST
psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
dswexec-0457 [2721] ds_exec_end_op : [Index]: Could not resolve operands, AE_NOT_FOUND
psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [2713] acpi_battery_get_statu: Error evaluating _BST
psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
dswexec-0457 [2928] ds_exec_end_op : [Index]: Could not resolve operands, AE_NOT_FOUND
psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [2920] acpi_battery_get_statu: Error evaluating _BST
psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
dswexec-0457 [3137] ds_exec_end_op : [Index]: Could not resolve operands, AE_NOT_FOUND
psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [3129] acpi_battery_get_statu: Error evaluating _BST
psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
dswexec-0457 [3291] ds_exec_end_op : [Index]: Could not resolve operands, AE_NOT_FOUND
psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [3283] acpi_battery_get_statu: Error evaluating _BST
psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
dswexec-0457 [3508] ds_exec_end_op : [Index]: Could not resolve operands, AE_NOT_FOUND
psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [3500] acpi_battery_get_statu: Error evaluating _BST
...
