scantool_net
scantool_net.SlackBuild
Codice: Seleziona tutto
#!/bin/sh
# Heavily based on the Slackware 13.37 SlackBuild (v1)
# Written by Luca De Pandis aka atomix600 (atomix600(at)hotmail(dot)it)
# Slackware build script for ScanTool.net
# Official Site: http://www.scantool.net
# Redistribution and use of this script, with or without modification, is
# permitted provided that the following conditions are met:
#
# 1. Redistributions of this script must retain the above copyright
# notice, this list of conditions and the following disclaimer.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
set -e
PKGNAME=${PKGNAME:-scantool_net}
VERSION=${VERSION:-1.13}
ARCH=${ARCH:-i486}
BUILD=${BUILD:-1}
TAG=${TAG:-sl}
PKGTYPE=${PKGTYPE:-txz}
SOURCE=${SOURCE:-http://kent.dl.sourceforge.net/project/scantool/ScanTool.net/$VERSION/${PKGNAME}113src.zip}
CWD=$(pwd)
TMP=${TMP:-/tmp/buildpkgs/$PKGNAME}
PKG=${PKG:-$TMP/package-$PKGNAME}
OUTPUT=${OUTPUT:-$CWD}
if [ ! -e ${PKGNAME}113src.zip ]; then
wget $SOURCE
fi
CHOST=i486
if [ $ARCH = i486 ]; then
SLKCFLAGS="-O2 -march=i486 -mtune=i686"
LIBIRSUFFIX=""
elif [ $ARCH = i586 ]; then
SLKCFLAGS="-O2 -march=i586 -mtune=i686"
LIBDIRSUFFIX=""
elif [ $ARCH = i686 ]; then
SLKCFLAGS="-O2 -march=i686 -mtune=i686"
LIBDIRSUFFIX=""
elif [ $ARCH = x86_64 ]; then
SLKCFLAGS="-O2 -fPIC"
LIBDIRSUFFIX="64"
CHOST=x86_64
fi
rm -rf $TMP
mkdir -p $TMP $PKG $OUTPUT
cd $TMP
mkdir -p $PKGNAME-$VERSION
cd $PKGNAME-$VERSION
unzip $CWD/${PKGNAME}113src.zip
chown -R root:root .
chmod -R u+w,go+r-w,a-s .
patch -p1 -i $CWD/unix-binary.patch
make
install -Dm 755 scantool $PKG/usr/bin/scantool
install -Dm 644 scantool.dat $PKG/usr/share/scantool/scantool.dat
install -Dm 644 codes.dat $PKG/usr/share/scantool/codes.dat
install -Dm 644 scantool.1 $PKG/usr/man/man1/scantool.1
mkdir -p $PKG/usr/doc/$PKGNAME-$VERSION
cp -a \
gpl.txt readme.txt todo.txt \
$PKG/usr/doc/$PKGNAME-$VERSION
cat $CWD/$PKGNAME.SlackBuild > $PKG/usr/doc/$PKGNAME-$VERSION/$PKGNAME.SlackBuild
cat $CWD/slack-desc > $PKG/usr/doc/$PKGNAME-$VERSION/slack-desc
if [ -d $PKG/usr/man ]; then
( cd $PKG/usr/man
find . -type f -exec gzip -9 {} \;
for i in $( find . -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
)
fi
( cd $PKG
find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs -r strip --strip-unneeded 2> /dev/null || true
find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs -r strip --strip-unneeded 2> /dev/null || true
find . | xargs file | grep "current ar archive" | cut -f 1 -d : | xargs -r strip --strip-unneeded 2> /dev/null || true
)
mkdir -p $PKG/install
cat $CWD/slack-desc > $PKG/install/slack-desc
cd $PKG
chown -R root:root $PKG
if [ -x "$(which requiredbuilder 2>/dev/null)" ]; then
requiredbuilder -y -v -s $CWD $PKG
fi
/sbin/makepkg -l y -c n $OUTPUT/$PKGNAME-$VERSION-$ARCH-$BUILD$TAG.$PKGTYPE
if [ "$1" = "--cleanup" ]; then
rm -rf $TMP
fi
Se lo slackbuild da errore riguardo alla mancanza della pagina di man scantool.1, prendi la man presente subito sotto, decomprimila (con gzip -d. Purtroppo il sito non ha accettato la manpages non compressa) e mettila nella directory dello slackbuild.
scantool.1.gz
Poi, nello slackbuild, modifica la riga
Codice: Seleziona tutto
install -Dm 644 scantool.1 $PKG/usr/man/man1/scantool.1
in
Codice: Seleziona tutto
install -Dm 644 $CWD/scantool.1 $PKG/usr/man/man1/scantool.1
unix-binary.patch
Codice: Seleziona tutto
--- a/makefile 2006-05-23 02:23:52.000000000 +0200
+++ b/makefile 2012-01-30 18:12:41.000000000 +0100
@@ -40,7 +40,7 @@
endif
OBJ += main.o main_menu.o serial.o options.o sensors.o trouble_code_reader.o custom_gui.o error_handlers.o about.o
-BIN = ScanTool.exe
+BIN = scantool
ifdef MINGDIR
endif
slack-desc
Codice: Seleziona tutto
# HOW TO EDIT THIS FILE:
# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|' on
# the right side marks the last column you can put a character in. You must make
# exactly 11 lines for the formatting to be correct. It's also customary to
# leave one space after the ':'.
|-----handy-ruler------------------------------------------------------|
scantool_net: scantool.net (OBD-II Software Front End)
scantool_net:
scantool_net: ScanTool.net OBD-II software lets you turn your laptop or desktop PC
scantool_net: into a sophisticated automotive diagnostics system. Currently, it can
scantool_net: be used to read trouble codes, display their definitions, reset the
scantool_net: MIL, and display real-time sensor data.
scantool_net:
scantool_net:
scantool_net:
scantool_net:
scantool_net:
Anche qui, stesso discorso fatto per i primi SlackBuild.
L'ordine dovrebbe essere
1) Allegro
2) dzcomm
3) scantool