Installazione Driver ATI proprietari
Moderatore: Staff
Regole del forum
1) Citare sempre la versione di Slackware64 usata, la versione del Kernel e magari anche la versione della libreria coinvolta. Questi dati aiutano le persone che possono rispondere.
2) Per evitare confusione prego inserire in questo forum solo topic che riguardano appunto Slackware64, se l'argomento è Slackware32 o generale usate rispettivamente il forum Slackware o Gnu/Linux in genere.
3) Leggere attentamente le risposte ricevute
4) Scrivere i messaggi con il colore di default, evitare altri colori.
5) Scrivere in Italiano o in Inglese, se possibile grammaticalmente corretto, evitate stili di scrittura poco chiari, quindi nessuna abbreviazione tipo telegramma o scrittura stile SMS o CHAT.
6) Appena registrati è consigliato presentarsi nel forum dedicato.
La non osservanza delle regole porta a provvedimenti di vari tipo da parte dello staff, in particolare la non osservanza della regola 5 porta alla cancellazione del post e alla segnalazione dell'utente. In caso di recidività l'utente rischia il ban temporaneo.
1) Citare sempre la versione di Slackware64 usata, la versione del Kernel e magari anche la versione della libreria coinvolta. Questi dati aiutano le persone che possono rispondere.
2) Per evitare confusione prego inserire in questo forum solo topic che riguardano appunto Slackware64, se l'argomento è Slackware32 o generale usate rispettivamente il forum Slackware o Gnu/Linux in genere.
3) Leggere attentamente le risposte ricevute
4) Scrivere i messaggi con il colore di default, evitare altri colori.
5) Scrivere in Italiano o in Inglese, se possibile grammaticalmente corretto, evitate stili di scrittura poco chiari, quindi nessuna abbreviazione tipo telegramma o scrittura stile SMS o CHAT.
6) Appena registrati è consigliato presentarsi nel forum dedicato.
La non osservanza delle regole porta a provvedimenti di vari tipo da parte dello staff, in particolare la non osservanza della regola 5 porta alla cancellazione del post e alla segnalazione dell'utente. In caso di recidività l'utente rischia il ban temporaneo.
- 414N
- Iper Master
- Messaggi: 2922
- Iscritto il: mer 13 feb 2008, 16:19
- Slackware: 15.0
- Kernel: 5.15.19
- Desktop: KDE5
- Località: Bulagna
- Contatta:
Re: Installazione Driver ATI proprietari
Ma stai lanciando startx da remoto tramite ssh? Della serie: complichiamoci la faccenda un altro po'
startx dovresti lanciarlo in locale mentre sei connesso in ssh da remoto, in modo da poter vedere il log di X com'è mentre la schermata del PC "malato" si tinteggia allegramente di nero.
startx dovresti lanciarlo in locale mentre sei connesso in ssh da remoto, in modo da poter vedere il log di X com'è mentre la schermata del PC "malato" si tinteggia allegramente di nero.
-
- Linux 4.x
- Messaggi: 1071
- Iscritto il: sab 4 giu 2005, 0:00
- Nome Cognome: Stefano Arbitrio
- Slackware: Slackware64 14
- Kernel: 3.2.X
- Desktop: KDE
- Località: Matrix
Re: Installazione Driver ATI proprietari
-_-' pardon ecco /var/log/Xorg.0.log
Codice: Seleziona tutto
X.Org X Server 1.12.3
Release Date: 2012-07-09
[ 1416.002] X Protocol Version 11, Revision 0
[ 1416.011] Build Operating System: Slackware 14.0 Slackware Linux Project
[ 1416.021] Current Operating System: Linux Neo 3.2.29 #2 SMP Mon Sep 17 14:19:22 CDT 2012 x86_64
[ 1416.021] Kernel command line: BOOT_IMAGE=Linux ro root=803 vt.default_utf8=0
[ 1416.040] Build Date: 23 August 2012 02:03:27PM
[ 1416.049]
[ 1416.058] Current version of pixman: 0.26.2
[ 1416.077] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1416.077] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1416.115] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec 4 23:36:31 2012
[ 1416.174] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 1416.183] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 1416.223] (==) No Layout section. Using the first Screen section.
[ 1416.223] (==) No screen section available. Using defaults.
[ 1416.223] (**) |-->Screen "Default Screen Section" (0)
[ 1416.223] (**) | |-->Monitor "<default monitor>"
[ 1416.223] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 1416.223] (**) | |-->Device "Card0"
[ 1416.223] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 1416.223] (==) Automatically adding devices
[ 1416.223] (==) Automatically enabling devices
[ 1416.235] (WW) The directory "/usr/share/fonts/local" does not exist.
[ 1416.235] Entry deleted from font path.
[ 1416.235] (WW) The directory "/usr/share/fonts/CID" does not exist.
[ 1416.235] Entry deleted from font path.
[ 1416.279] (==) FontPath set to:
/usr/share/fonts/TTF,
/usr/share/fonts/OTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi/:unscaled,
/usr/share/fonts/100dpi/:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi,
/usr/share/fonts/cyrillic
[ 1416.279] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 1416.279] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 1416.279] (II) Loader magic: 0x7c48e0
[ 1416.279] (II) Module ABI versions:
[ 1416.279] X.Org ANSI C Emulation: 0.4
[ 1416.279] X.Org Video Driver: 12.0
[ 1416.279] X.Org XInput driver : 16.0
[ 1416.279] X.Org Server Extension : 6.0
[ 1416.281] (--) PCI:*(0:1:5:0) 1002:9712:1025:0293 rev 0, Mem @ 0xd0000000/268435456, 0xcfdf0000/65536, 0xcfe00000/1048576,
I/O @ 0x00009000/256
[ 1416.281] (II) Open ACPI successful (/var/run/acpid.socket)
[ 1416.281] (II) LoadModule: "extmod"
[ 1416.310] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[ 1416.325] (II) Module extmod: vendor="X.Org Foundation"
[ 1416.325] compiled for 1.12.3, module version = 1.0.0
[ 1416.325] Module class: X.Org Server Extension
[ 1416.325] ABI class: X.Org Server Extension, version 6.0
[ 1416.325] (II) Loading extension MIT-SCREEN-SAVER
[ 1416.325] (II) Loading extension XFree86-VidModeExtension
[ 1416.325] (II) Loading extension XFree86-DGA
[ 1416.325] (II) Loading extension DPMS
[ 1416.325] (II) Loading extension XVideo
[ 1416.325] (II) Loading extension XVideo-MotionCompensation
[ 1416.325] (II) Loading extension X-Resource
[ 1416.325] (II) LoadModule: "dbe"
[ 1416.326] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[ 1416.326] (II) Module dbe: vendor="X.Org Foundation"
[ 1416.326] compiled for 1.12.3, module version = 1.0.0
[ 1416.326] Module class: X.Org Server Extension
[ 1416.327] ABI class: X.Org Server Extension, version 6.0
[ 1416.327] (II) Loading extension DOUBLE-BUFFER
[ 1416.327] (II) LoadModule: "glx"
[ 1416.327] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 1416.363] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 1416.363] compiled for 6.9.0, module version = 1.0.0
[ 1416.364] (II) Loading extension GLX
[ 1416.364] (II) LoadModule: "record"
[ 1416.364] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[ 1416.365] (II) Module record: vendor="X.Org Foundation"
[ 1416.365] compiled for 1.12.3, module version = 1.13.0
[ 1416.365] Module class: X.Org Server Extension
[ 1416.365] ABI class: X.Org Server Extension, version 6.0
[ 1416.365] (II) Loading extension RECORD
[ 1416.365] (II) LoadModule: "dri"
[ 1416.365] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
[ 1416.385] (II) Module dri: vendor="X.Org Foundation"
[ 1416.385] compiled for 1.12.3, module version = 1.0.0
[ 1416.385] ABI class: X.Org Server Extension, version 6.0
[ 1416.385] (II) Loading extension XFree86-DRI
[ 1416.385] (II) LoadModule: "dri2"
[ 1416.385] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
[ 1416.386] (II) Module dri2: vendor="X.Org Foundation"
[ 1416.386] compiled for 1.12.3, module version = 1.2.0
[ 1416.386] ABI class: X.Org Server Extension, version 6.0
[ 1416.386] (II) Loading extension DRI2
[ 1416.386] (II) LoadModule: "fglrx"
[ 1416.387] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so
[ 1416.767] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 1416.767] compiled for 1.4.99.906, module version = 8.97.2
[ 1416.767] Module class: X.Org Video Driver
[ 1416.768] (II) Loading sub module "fglrxdrm"
[ 1416.768] (II) LoadModule: "fglrxdrm"
[ 1416.768] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 1416.795] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 1416.795] compiled for 1.4.99.906, module version = 8.97.2
[ 1416.795] (II) ATI Proprietary Linux Driver Version Identifier:8.97.2
[ 1416.795] (II) ATI Proprietary Linux Driver Release Identifier: 8.97.100.3
[ 1416.795] (II) ATI Proprietary Linux Driver Build Date: Jul 3 2012 23:56:30
[ 1416.795] (--) using VT number 7
[ 1416.831] (WW) Falling back to old probe method for fglrx
[ 1416.921] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 1416.943] (--) Assigning device section with no busID to primary device
[ 1416.943] (--) Chipset Supported AMD Graphics Processor (0x9712) found
[ 1416.944] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[ 1416.944] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[ 1416.944] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:1) found
[ 1416.944] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[ 1416.944] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[ 1416.944] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:1) found
[ 1416.944] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[ 1416.944] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[ 1416.944] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[ 1416.944] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[ 1416.944] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[ 1416.944] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:5:1) found
[ 1416.945] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 1416.955] (II) AMD Video driver is signed
[ 1416.955] (II) fglrx(0): pEnt->device->identifier=0xa71730
[ 1416.955] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin
[ 1416.956] (II) Loading sub module "vgahw"
[ 1416.956] (II) LoadModule: "vgahw"
[ 1416.997] (II) Loading /usr/lib64/xorg/modules/libvgahw.so
[ 1417.013] (II) Module vgahw: vendor="X.Org Foundation"
[ 1417.013] compiled for 1.12.3, module version = 0.1.0
[ 1417.013] ABI class: X.Org Video Driver, version 12.0
[ 1417.013] (II) fglrx(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 1417.013] (==) fglrx(0): Depth 24, (==) framebuffer bpp 32
[ 1417.013] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 1417.013] (==) fglrx(0): Default visual is TrueColor
[ 1417.013] (==) fglrx(0): RGB weight 888
[ 1417.013] (II) fglrx(0): Using 8 bits per RGB
[ 1417.013] (==) fglrx(0): Buffer Tiling is ON
[ 1417.014] (II) Loading sub module "fglrxdrm"
[ 1417.014] (II) LoadModule: "fglrxdrm"
[ 1417.014] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 1417.014] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 1417.014] compiled for 1.4.99.906, module version = 8.97.2
[ 1417.020] ukiDynamicMajor: found major device number 246
[ 1417.020] ukiDynamicMajor: found major device number 246
[ 1417.020] ukiOpenByBusid: Searching for BusID PCI:1:5:0
[ 1417.020] ukiOpenDevice: node name is /dev/ati/card0
[ 1417.020] ukiOpenDevice: open result is 14, (OK)
[ 1417.020] ukiOpenByBusid: ukiOpenMinor returns 14
[ 1417.020] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0
[ 1417.020] (**) fglrx(0): NoAccel = NO
[ 1417.020] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 1417.021] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 4200 Series" (Chipset = 0x9712)
[ 1417.021] (--) fglrx(0): (PciSubVendor = 0x1025, PciSubDevice = 0x0293)
[ 1417.021] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 1417.021] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 1417.021] (--) fglrx(0): MMIO registers at 0xcfdf0000
[ 1417.021] (--) fglrx(0): I/O port at 0x00009000
[ 1417.021] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 1417.048] (II) fglrx(0): ATIF platform detected
[ 1417.049] (II) fglrx(0): AC Adapter is used
[ 1417.079] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 1417.094] (II) Loading sub module "vbe"
[ 1417.094] (II) LoadModule: "vbe"
[ 1417.110] (II) Loading /usr/lib64/xorg/modules/libvbe.so
[ 1417.079] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 1417.094] (II) Loading sub module "vbe"
[ 1417.094] (II) LoadModule: "vbe"
[ 1417.110] (II) Loading /usr/lib64/xorg/modules/libvbe.so
[ 1417.118] (II) Module vbe: vendor="X.Org Foundation"
[ 1417.118] compiled for 1.12.3, module version = 1.1.0
[ 1417.118] ABI class: X.Org Video Driver, version 12.0
[ 1417.132] (II) fglrx(0): VESA BIOS detected
[ 1417.132] (II) fglrx(0): VESA VBE Version 3.0
[ 1417.132] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 1417.132] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 1417.132] (II) fglrx(0): VESA VBE OEM Software Rev: 10.94
[ 1417.132] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 1417.132] (II) fglrx(0): VESA VBE OEM Product: RS880M
[ 1417.132] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 1417.146] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 1417.146] (--) fglrx(0): Video RAM: 262144 kByte, Type: DDR2
[ 1417.146] (II) fglrx(0): PCIE card detected
[ 1417.146] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 1417.146] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 1417.147] (II) fglrx(0): Using adapter: 1:5.0.
[ 1417.155] (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
[ 1417.185] (II) fglrx(0): Interrupt handler installed at IRQ 18.
[ 1417.185] (II) fglrx(0): RandR 1.2 support is enabled!
[ 1417.185] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 1417.185] (==) fglrx(0): Center Mode is disabled
[ 1417.185] (II) Loading sub module "fb"
[ 1417.185] (II) LoadModule: "fb"
[ 1417.186] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 1417.243] (II) Module fb: vendor="X.Org Foundation"
[ 1417.243] compiled for 1.12.3, module version = 1.0.0
[ 1417.243] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1417.243] (II) Loading sub module "ddc"
[ 1417.243] (II) LoadModule: "ddc"
[ 1417.243] (II) Module "ddc" already built-in
- 414N
- Iper Master
- Messaggi: 2922
- Iscritto il: mer 13 feb 2008, 16:19
- Slackware: 15.0
- Kernel: 5.15.19
- Desktop: KDE5
- Località: Bulagna
- Contatta:
Re: Installazione Driver ATI proprietari
Da quanto riportato non noto nulla di anomalo, se non il fatto che il log si interrompa prima dell'autorilevamento delle periferiche di input. fglrx viene caricato correttamente, a quanto sembra.
Prova ad impostare twm (xinitrc.twm) tramite xwmconfig e poi lancia startx, tanto per escludere qualche "simpatico" effetto desktop 6D di KDE 4. Se la sessione desktop parte (preparati che la grafica è orrida ) allora la colpa è di qualche effetto di Kwin e vedremo di castrarlo...
Prova ad impostare twm (xinitrc.twm) tramite xwmconfig e poi lancia startx, tanto per escludere qualche "simpatico" effetto desktop 6D di KDE 4. Se la sessione desktop parte (preparati che la grafica è orrida ) allora la colpa è di qualche effetto di Kwin e vedremo di castrarlo...
-
- Linux 4.x
- Messaggi: 1071
- Iscritto il: sab 4 giu 2005, 0:00
- Nome Cognome: Stefano Arbitrio
- Slackware: Slackware64 14
- Kernel: 3.2.X
- Desktop: KDE
- Località: Matrix
Re: Installazione Driver ATI proprietari
ho preimpostato fluxbox prima ora provo
-
- Linux 4.x
- Messaggi: 1071
- Iscritto il: sab 4 giu 2005, 0:00
- Nome Cognome: Stefano Arbitrio
- Slackware: Slackware64 14
- Kernel: 3.2.X
- Desktop: KDE
- Località: Matrix
Re: Installazione Driver ATI proprietari
no niente sempre schermo nero
- 414N
- Iper Master
- Messaggi: 2922
- Iscritto il: mer 13 feb 2008, 16:19
- Slackware: 15.0
- Kernel: 5.15.19
- Desktop: KDE5
- Località: Bulagna
- Contatta:
Re: Installazione Driver ATI proprietari
Sto esaurendo le idee...
Il pacchetto fglrx come l'hai creato? Usando lo switch "--buildpkg Slackware" oppure da GUI?
Il pacchetto fglrx come l'hai creato? Usando lo switch "--buildpkg Slackware" oppure da GUI?
-
- Linux 4.x
- Messaggi: 1071
- Iscritto il: sab 4 giu 2005, 0:00
- Nome Cognome: Stefano Arbitrio
- Slackware: Slackware64 14
- Kernel: 3.2.X
- Desktop: KDE
- Località: Matrix
Re: Installazione Driver ATI proprietari
--buildpkg Slackware, ti ripeto ho semplicemente seguito passo per passo la guida.
- 414N
- Iper Master
- Messaggi: 2922
- Iscritto il: mer 13 feb 2008, 16:19
- Slackware: 15.0
- Kernel: 5.15.19
- Desktop: KDE5
- Località: Bulagna
- Contatta:
Re: Installazione Driver ATI proprietari
Tanto per non saper né leggere né scrivere, hai provato il suggerimento di rik70?
Altra cosa, il driver "evdev" compare nell'output di lsmod prima di lanciare startx? In caso negativo, prova a caricarlo manualmente e a lanciare startx in seguito.
Per il passo 1 assicurati di eliminare (o rinominare con un'estensione diversa da .conf) sia /etc/X11/xorg.conf sia tutti i file sotto /etc/X11/xorg.conf.d/.rik70 ha scritto:Fai questo tentativo:
1 - elimina/rinomina tutti file di configurazione di Xorg creati in precedenza;
2 - crea il file ''/etc/X11/xorg.conf.d/90-card.conf" e incollaci dentro:
3 - Da Init 3 fai un bel startx e vedi se salta fuori qualcosa di utile. Magari fai in modo che venga avviata una sessione grafica tipo Xfce/fluxbox... insomma... niente KDE per il momento.Codice: Seleziona tutto
Section "Device" Identifier "Card0" Driver "fglrx" EndSection
Ciao
Altra cosa, il driver "evdev" compare nell'output di lsmod prima di lanciare startx? In caso negativo, prova a caricarlo manualmente e a lanciare startx in seguito.
-
- Linux 4.x
- Messaggi: 1071
- Iscritto il: sab 4 giu 2005, 0:00
- Nome Cognome: Stefano Arbitrio
- Slackware: Slackware64 14
- Kernel: 3.2.X
- Desktop: KDE
- Località: Matrix
Re: Installazione Driver ATI proprietari
Si, ho provato anche come ha consigliato rik70, adesso riavvio parto con slackware e ti faccio sapere. Faccio una domanda parlando da ignorante:
Dato che come dicevo precedentemente il mio portatile ha una porta VGA e una porta HDMI, è possibile che card0 e card2 si riferiscano a queste due dato che abbiamo chiarito che card1 è relativa al monitor del portatile?
Dato che come dicevo precedentemente il mio portatile ha una porta VGA e una porta HDMI, è possibile che card0 e card2 si riferiscano a queste due dato che abbiamo chiarito che card1 è relativa al monitor del portatile?
- 414N
- Iper Master
- Messaggi: 2922
- Iscritto il: mer 13 feb 2008, 16:19
- Slackware: 15.0
- Kernel: 5.15.19
- Desktop: KDE5
- Località: Bulagna
- Contatta:
Re: Installazione Driver ATI proprietari
No, quelle sono solo uscite della stessa scheda video (sempre che il tuo portatile non abbia un sistema simil-Optimus con più di una scheda video montata a bordo) e al massimo provocherebbero la creazione di due diverse sezioni "Monitor" in xorg.conf.
Le "cardX" rilevate, invece, sono 3 perché tu hai 3 driver compatibili con la tua scheda nel sistema: vesa (che va su ogni scheda video), modesetting (il driver radeon opensource) e fglrx.
Le "cardX" rilevate, invece, sono 3 perché tu hai 3 driver compatibili con la tua scheda nel sistema: vesa (che va su ogni scheda video), modesetting (il driver radeon opensource) e fglrx.
-
- Linux 4.x
- Messaggi: 1071
- Iscritto il: sab 4 giu 2005, 0:00
- Nome Cognome: Stefano Arbitrio
- Slackware: Slackware64 14
- Kernel: 3.2.X
- Desktop: KDE
- Località: Matrix
Re: Installazione Driver ATI proprietari
Perdonate il ritardo della mia risposta, ho avuto una settimana difficile! Allora allego il mio lsmod post modprobe -f evdev
Premetto che sto seguendo sempre i consigli di rik70 in /etc/X11/xorg.conf.d/ cè il file 90-card.conf
Do startx per far partire twm e ovviamente da schermo nero ecco /var/log/Xorg.0.log
Codice: Seleziona tutto
root@Neo:~# lsmod
Module Size Used by
snd_seq_dummy 1455 0
snd_seq_oss 29048 0
snd_seq_midi_event 5620 1 snd_seq_oss
snd_seq 51265 5 snd_seq_midi_event,snd_seq_oss,snd_seq_dummy
snd_seq_device 5228 3 snd_seq,snd_seq_oss,snd_seq_dummy
snd_pcm_oss 39183 0
snd_mixer_oss 15404 1 snd_pcm_oss
ipv6 279979 14
cpufreq_ondemand 6252 2
powernow_k8 12747 0
mperf 1171 1 powernow_k8
freq_table 2475 2 powernow_k8,cpufreq_ondemand
lp 9787 0
ppdev 5958 0
parport_pc 19423 0
parport 31427 3 parport_pc,ppdev,lp
fuse 66626 3
snd_hda_codec_hdmi 24057 1
snd_hda_codec_realtek 195474 1
uvcvideo 62784 0
snd_hda_intel 23267 0
snd_hda_codec 81925 3 snd_hda_intel,snd_hda_codec_realtek,snd_hda_codec_hdmi
ath9k 86079 0
videodev 76679 1 uvcvideo
ath9k_common 1978 1 ath9k
snd_hwdep 6324 1 snd_hda_codec
ath9k_hw 348866 2 ath9k_common,ath9k
v4l2_compat_ioctl32 8660 1 videodev
joydev 9972 0
snd_pcm 72864 4 snd_hda_codec,snd_hda_intel,snd_hda_codec_hdmi,snd_pcm_oss
ath 14755 3 ath9k_hw,ath9k_common,ath9k
snd_page_alloc 7081 2 snd_pcm,snd_hda_intel
fglrx 3201055 0
mac80211 227731 1 ath9k
ums_realtek 7376 0
uas 8144 0
agpgart 27372 1 fglrx
sp5100_tco 4624 0
k10temp 2843 0
video 11378 0
i2c_piix4 8152 0
acer_wmi 19581 0
sparse_keymap 3016 1 acer_wmi
cfg80211 169025 3 mac80211,ath,ath9k
tg3 136187 0
processor 25592 1 powernow_k8
rfkill 15428 3 cfg80211,acer_wmi
libphy 16689 1 tg3
shpchp 26337 0
psmouse 61704 0
serio_raw 4389 0
evdev 9574 0
snd_timer 18798 2 snd_pcm,snd_seq
thermal 7983 0
battery 11171 0
thermal_sys 14578 3 thermal,processor,video
i2c_core 19978 2 i2c_piix4,videodev
button 4529 1 fglrx
ac 3331 0
hwmon 1329 2 thermal_sys,k10temp
snd 57796 12 snd_timer,snd_pcm,snd_hwdep,snd_hda_codec,snd_hda_intel,snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_mixer_oss,snd_pcm_oss,snd_seq_device,snd_seq,snd_seq_oss
soundcore 5474 1 snd
wmi 8403 1 acer_wmi
loop 18192 0
Codice: Seleziona tutto
root@Neo:/etc/X11/xorg.conf.d# ls -l
total 4
-rw-r--r-- 1 root root 79 Dec 4 22:23 90-card.conf
Codice: Seleziona tutto
root@Neo:/etc/X11/xorg.conf.d# cat 90-card.conf
Section "Device"
Identifier "Card0"
Driver "fglrx"
EndSection
Codice: Seleziona tutto
[ 436.368] Build Date: 23 August 2012 02:03:27PM
[ 436.377]
[ 436.385] Current version of pixman: 0.26.2
[ 436.402] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 436.402] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 436.438] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 8 15:19:11 2012
[ 436.561] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 436.571] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 436.591] (==) No Layout section. Using the first Screen section.
[ 436.591] (==) No screen section available. Using defaults.
[ 436.591] (**) |-->Screen "Default Screen Section" (0)
[ 436.591] (**) | |-->Monitor "<default monitor>"
[ 436.592] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 436.592] (**) | |-->Device "Card0"
[ 436.592] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 436.592] (==) Automatically adding devices
[ 436.592] (==) Automatically enabling devices
[ 436.606] (WW) The directory "/usr/share/fonts/local" does not exist.
[ 436.606] Entry deleted from font path.
[ 436.606] (WW) The directory "/usr/share/fonts/CID" does not exist.
[ 436.606] Entry deleted from font path.
[ 436.649] (==) FontPath set to:
/usr/share/fonts/TTF,
/usr/share/fonts/OTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi/:unscaled,
/usr/share/fonts/100dpi/:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi,
/usr/share/fonts/cyrillic
[ 436.650] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 436.650] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 436.650] (II) Loader magic: 0x7c48e0
[ 436.650] (II) Module ABI versions:
[ 436.650] X.Org ANSI C Emulation: 0.4
[ 436.650] X.Org Video Driver: 12.0
[ 436.650] X.Org XInput driver : 16.0
[ 436.650] X.Org Server Extension : 6.0
[ 436.651] (--) PCI:*(0:1:5:0) 1002:9712:1025:0293 rev 0, Mem @ 0xd0000000/268435456, 0xcfdf0000/65536, 0xcfe00000/1048576, I/O @ 0x00009000/256
[ 436.651] (II) Open ACPI successful (/var/run/acpid.socket)
[ 436.651] (II) LoadModule: "extmod"
[ 436.667] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[ 436.684] (II) Module extmod: vendor="X.Org Foundation"
[ 436.684] compiled for 1.12.3, module version = 1.0.0
[ 436.684] Module class: X.Org Server Extension
[ 436.684] ABI class: X.Org Server Extension, version 6.0
[ 436.684] (II) Loading extension MIT-SCREEN-SAVER
[ 436.684] (II) Loading extension XFree86-VidModeExtension
[ 436.684] (II) Loading extension XFree86-DGA
[ 436.684] (II) Loading extension DPMS
[ 436.684] (II) Loading extension XVideo
[ 436.684] (II) Loading extension XVideo-MotionCompensation
[ 436.684] (II) Loading extension X-Resource
[ 436.685] (II) LoadModule: "dbe"
[ 436.685] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[ 436.686] (II) Module dbe: vendor="X.Org Foundation"
[ 436.686] compiled for 1.12.3, module version = 1.0.0
[ 436.686] Module class: X.Org Server Extension
[ 436.686] ABI class: X.Org Server Extension, version 6.0
[ 436.686] (II) Loading extension DOUBLE-BUFFER
[ 436.686] (II) LoadModule: "glx"
[ 436.686] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 436.723] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 436.723] compiled for 6.9.0, module version = 1.0.0
[ 436.723] (II) Loading extension GLX
[ 436.723] (II) LoadModule: "record"
[ 436.724] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[ 436.725] (II) Module record: vendor="X.Org Foundation"
[ 436.725] compiled for 1.12.3, module version = 1.13.0
[ 436.725] Module class: X.Org Server Extension
[ 436.725] ABI class: X.Org Server Extension, version 6.0
[ 436.725] (II) Loading extension RECORD
[ 436.725] (II) LoadModule: "dri"
[ 436.725] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
[ 436.744] (II) Module dri: vendor="X.Org Foundation"
[ 436.744] compiled for 1.12.3, module version = 1.0.0
[ 436.744] ABI class: X.Org Server Extension, version 6.0
[ 436.744] (II) Loading extension XFree86-DRI
[ 436.744] (II) LoadModule: "dri2"
[ 436.745] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
[ 436.746] (II) Module dri2: vendor="X.Org Foundation"
[ 436.746] compiled for 1.12.3, module version = 1.2.0
[ 436.746] ABI class: X.Org Server Extension, version 6.0
[ 436.746] (II) Loading extension DRI2
[ 436.746] (II) LoadModule: "fglrx"
[ 436.747] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so
[ 437.116] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 437.116] compiled for 1.4.99.906, module version = 8.97.2
[ 437.116] Module class: X.Org Video Driver
[ 437.117] (II) Loading sub module "fglrxdrm"
[ 437.117] (II) LoadModule: "fglrxdrm"
[ 437.117] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 437.132] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 437.132] compiled for 1.4.99.906, module version = 8.97.2
[ 437.132] (II) ATI Proprietary Linux Driver Version Identifier:8.97.2
[ 437.132] (II) ATI Proprietary Linux Driver Release Identifier: 8.97.100.3
[ 437.132] (II) ATI Proprietary Linux Driver Build Date: Jul 3 2012 23:56:30
[ 437.132] (--) using VT number 7
[ 437.169] (WW) Falling back to old probe method for fglrx
[ 437.243] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 437.270] (--) Assigning device section with no busID to primary device
[ 437.270] (--) Chipset Supported AMD Graphics Processor (0x9712) found
[ 437.283] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[ 437.283] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[ 437.283] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:1) found
[ 437.283] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[ 437.283] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[ 437.283] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:1) found
[ 437.283] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[ 437.283] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[ 437.283] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[ 437.283] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[ 437.283] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[ 437.283] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:5:1) found
[ 437.284] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 437.292] (II) AMD Video driver is signed
[ 437.292] (II) fglrx(0): pEnt->device->identifier=0x12de730
[ 437.292] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin
[ 437.293] (II) Loading sub module "vgahw"
[ 437.293] (II) LoadModule: "vgahw"
[ 437.334] (II) Loading /usr/lib64/xorg/modules/libvgahw.so
[ 437.350] (II) Module vgahw: vendor="X.Org Foundation"
[ 437.350] compiled for 1.12.3, module version = 0.1.0
[ 437.350] ABI class: X.Org Video Driver, version 12.0
[ 437.350] (II) fglrx(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 437.350] (==) fglrx(0): Depth 24, (==) framebuffer bpp 32
[ 437.350] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 437.350] (==) fglrx(0): Default visual is TrueColor
[ 437.350] (==) fglrx(0): RGB weight 888
[ 437.350] (II) fglrx(0): Using 8 bits per RGB
[ 437.351] (==) fglrx(0): Buffer Tiling is ON
[ 437.351] (II) Loading sub module "fglrxdrm"
[ 437.351] (II) LoadModule: "fglrxdrm"
[ 437.351] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 437.352] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 437.352] compiled for 1.4.99.906, module version = 8.97.2
[ 437.357] ukiDynamicMajor: found major device number 246
[ 437.357] ukiDynamicMajor: found major device number 246
[ 437.357] ukiOpenByBusid: Searching for BusID PCI:1:5:0
[ 437.357] ukiOpenDevice: node name is /dev/ati/card0
[ 437.357] ukiOpenDevice: open result is 14, (OK)
[ 437.357] ukiOpenByBusid: ukiOpenMinor returns 14
[ 437.357] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0
[ 437.358] (**) fglrx(0): NoAccel = NO
[ 437.358] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 437.358] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 4200 Series" (Chipset = 0x9712)
[ 437.358] (--) fglrx(0): (PciSubVendor = 0x1025, PciSubDevice = 0x0293)
[ 437.358] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 437.358] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 437.358] (--) fglrx(0): MMIO registers at 0xcfdf0000
[ 437.358] (--) fglrx(0): I/O port at 0x00009000
[ 437.358] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 437.384] (II) fglrx(0): ATIF platform detected
[ 437.385] (II) fglrx(0): AC Adapter is used
[ 437.416] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 437.431] (II) Loading sub module "vbe"
[ 437.431] (II) LoadModule: "vbe"
[ 437.448] (II) Loading /usr/lib64/xorg/modules/libvbe.so
[ 437.456] (II) Module vbe: vendor="X.Org Foundation"
[ 437.456] compiled for 1.12.3, module version = 1.1.0
[ 437.456] ABI class: X.Org Video Driver, version 12.0
[ 437.469] (II) fglrx(0): VESA BIOS detected
[ 437.469] (II) fglrx(0): VESA VBE Version 3.0
[ 437.469] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 437.469] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 437.469] (II) fglrx(0): VESA VBE OEM Software Rev: 10.94
[ 437.469] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 437.469] (II) fglrx(0): VESA VBE OEM Product: RS880M
[ 437.469] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 437.479] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 437.479] (--) fglrx(0): Video RAM: 262144 kByte, Type: DDR2
[ 437.479] (II) fglrx(0): PCIE card detected
[ 437.479] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 437.479] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 437.480] (II) fglrx(0): Using adapter: 1:5.0.
[ 437.488] (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
[ 437.517] (II) fglrx(0): Interrupt handler installed at IRQ 18.
[ 437.517] (II) fglrx(0): RandR 1.2 support is enabled!
[ 437.517] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 437.517] (==) fglrx(0): Center Mode is disabled
[ 437.517] (II) Loading sub module "fb"
[ 437.517] (II) LoadModule: "fb"
[ 437.518] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 437.530] (II) Module fb: vendor="X.Org Foundation"
[ 437.530] compiled for 1.12.3, module version = 1.0.0
[ 437.530] ABI class: X.Org ANSI C Emulation, version 0.4
[ 437.530] (II) Loading sub module "ddc"
[ 437.530] (II) LoadModule: "ddc"
[ 437.530] (II) Module "ddc" already built-in
- 414N
- Iper Master
- Messaggi: 2922
- Iscritto il: mer 13 feb 2008, 16:19
- Slackware: 15.0
- Kernel: 5.15.19
- Desktop: KDE5
- Località: Bulagna
- Contatta:
Re: Installazione Driver ATI proprietari
Continuo a non vedere nulla di lampante per giustificare il mancato avvio di X...
Quando lanci startx e la schermata diventa nera, c'è un cursore lampeggiante (testuale) in alto a sinistra nello schermo o proprio niente?
Riesci a vedere tramite ssh quale processo sta impegnando la CPU con top, dopo il lancio di startx?
Quando lanci startx e la schermata diventa nera, c'è un cursore lampeggiante (testuale) in alto a sinistra nello schermo o proprio niente?
Riesci a vedere tramite ssh quale processo sta impegnando la CPU con top, dopo il lancio di startx?
- zoros
- Linux 4.x
- Messaggi: 1361
- Iscritto il: lun 28 mag 2007, 22:51
- Nome Cognome: Fabio`Zorba`
- Slackware: 14.1
- Kernel: 3.10.30-smp
- Desktop: KDE-3.5(works!)
- Località: Gorizia
- Contatta:
Re: Installazione Driver ATI proprietari
ho installato recentemente il driver ATI proprietario, ma direttamente dal suo installer grafico ... la scheda va ok ... mi ritrovo questi file nel sistema:
ho aggiunto io:
altrimenti i video flash sfarfallavano
se può essere utile ...
Codice: Seleziona tutto
# cat /etc/modprobe.d/blacklist-fglrx.conf
# Advanced Micro Devices, Inc.
# radeon conflicts with AMD Linux Graphics Driver
blacklist radeon
Codice: Seleziona tutto
# cat /etc/X11/xorg.conf
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
Option "VideoOverlay" "off"
Option "OpenGLOverlay" "on"
BusID "PCI:0:1:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Codice: Seleziona tutto
Option "VideoOverlay" "off"
Option "OpenGLOverlay" "on"
...
Section "DRI"
Mode 0666
EndSection
se può essere utile ...
vorrei riavere le mie firme ...
- 414N
- Iper Master
- Messaggi: 2922
- Iscritto il: mer 13 feb 2008, 16:19
- Slackware: 15.0
- Kernel: 5.15.19
- Desktop: KDE5
- Località: Bulagna
- Contatta:
Re: Installazione Driver ATI proprietari
Quali driver Catalyst hai installato? Se hai una scheda video più recente di una HD4xxx (dalla serie 5xxx in su, quindi) puoi installare gli ultimi driver video rilasciati senza problemi, mentre chi ha una scheda compresa tra la serie HD2xxx e HD4xxx (come DarkNeo) è obbligato ad installare i driver legacy, che sono stati rilasciati a Luglio di quest'anno e non sono stati ulteriormente aggiornati per ora.zoros ha scritto:ho installato recentemente il driver ATI proprietario, ma direttamente dal suo installer grafico ... la scheda va ok ... mi ritrovo questi file nel sistema: [...]
- zoros
- Linux 4.x
- Messaggi: 1361
- Iscritto il: lun 28 mag 2007, 22:51
- Nome Cognome: Fabio`Zorba`
- Slackware: 14.1
- Kernel: 3.10.30-smp
- Desktop: KDE-3.5(works!)
- Località: Gorizia
- Contatta:
Re: Installazione Driver ATI proprietari
sì, ok 414N ...
non ho seguito il thread passo passo ... leggendo le pagine mi sembrava tutto un po' confuso, ma forse ho letto frettolosamente ... comunque, mi sembra non sia specificato marca/modello pc, non si è capito se radeon è andato in blacklist, ecc. ... anche usare xorgconfig non mi è sembrata una buona idea ... troppi settaggi sovrapposti, con il rischio di non capire il problema ...
avevo scritto "se può essere utile ..." ... probabilmente no
EDIT: sono sull'eeepc asus ... ho installato il seguente driver:
amd-driver-installer-catalyst-12.10-x86.x86_64.zip
non ho seguito il thread passo passo ... leggendo le pagine mi sembrava tutto un po' confuso, ma forse ho letto frettolosamente ... comunque, mi sembra non sia specificato marca/modello pc, non si è capito se radeon è andato in blacklist, ecc. ... anche usare xorgconfig non mi è sembrata una buona idea ... troppi settaggi sovrapposti, con il rischio di non capire il problema ...
avevo scritto "se può essere utile ..." ... probabilmente no
EDIT: sono sull'eeepc asus ... ho installato il seguente driver:
amd-driver-installer-catalyst-12.10-x86.x86_64.zip
vorrei riavere le mie firme ...