slacky.eu


https://slacky.eu/forum/

problemino topolino

https://slacky.eu/forum/viewtopic.php?f=1&t=10969

Pagina 1 di 1

problemino topolino

Inviato: mar 24 gen 2006, 9:33
da prione
Ciao a tutti!
Avrei un problemino col mouse ( seriale ): dopo aver digitato startx il cursore del mouse non risponde ( rimane fermo ) per una trentina di secondi, poi si comporta regolarmente. Se chiudo x e lo riavvio questo problema non si manifesta più.
Ho provato a editare xorg.conf e a cercare in rete, ma senza successo.
Di seguito ci sono due sezioni relative al mouse di due files xorg.conf:
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Auto"
Option "Device" "/dev/mouse"


Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto"
Option "Device" "/dev/mouse"

Nessuno dei due xorg.conf mi risolve il probelma.
Avete qualche suggerimento?
Vi ringrazio in anticipo.
Ciao!

Inviato: mar 24 gen 2006, 11:08
da albatrosla
Dai un'occhiata a che dice /var/log/Xorg.0.log

Inviato: mar 24 gen 2006, 20:35
da prione
Albatros_la ha scritto:Dai un'occhiata a che dice /var/log/Xorg.0.log
ecco qui:


_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/blacksea:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6

X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.13 i686 [ELF]
Current Operating System: Linux blacksea 2.4.31 #6 Sun Jun 5 19:04:47 PDT 2005 i686
Build Date: 11 September 2005
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 24 19:54:35 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "My Monitor"
(**) | |-->Device "RIVA128"
(**) |-->Input Device "Serial Mouse"
(**) |-->Input Device "Keyboard1"
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/local/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/local/").
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/Speedo/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/Speedo/").
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/cyrillic/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/cyrillic/").
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(--) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7190 card 0000,0000 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
(II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 hdr 00
(II) PCI: 00:0e:0: chip 1274,1371 card 1274,1371 rev 08 class 04,01,00 hdr 00
(II) PCI: 00:0f:0: chip 1186,1300 card 1186,1303 rev 10 class 02,00,00 hdr 00
(II) PCI: 00:11:0: chip 14f1,1036 card 13e0,0270 rev 08 class 07,80,00 hdr 00
(II) PCI: 01:00:0: chip 12d2,0018 card 0000,0000 rev 22 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x008c (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xf5000000 - 0xf5ffffff (0x1000000) MX
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) NVidia / SGS Thomson (Joint Venture) Riva128 rev 34, Mem @ 0xf5000000/24, 0xfc000000/24
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX(B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xf8000000 from 0xfbffffff to 0xf7ffffff
(II) Active PCI resource ranges:
[0] -1 0 0xf4000000 - 0xf400ffff (0x10000) MX[B]
[1] -1 0 0xf4010000 - 0xf40100ff (0x100) MX[B]
[2] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[3] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[4] -1 0 0xf5000000 - 0xf5ffffff (0x1000000) MX[B](B)
[5] -1 0 0x00001470 - 0x00001477 (0x8) IX[B]
[6] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
[7] -1 0 0x00001400 - 0x0000143f (0x40) IX[B]
[8] -1 0 0x00001440 - 0x0000145f (0x20) IX[B]
[9] -1 0 0x00001460 - 0x0000146f (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xf4000000 - 0xf400ffff (0x10000) MX[B]
[1] -1 0 0xf4010000 - 0xf40100ff (0x100) MX[B]
[2] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[3] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[4] -1 0 0xf5000000 - 0xf5ffffff (0x1000000) MX[B](B)
[5] -1 0 0x00001470 - 0x00001477 (0x8) IX[B]
[6] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
[7] -1 0 0x00001400 - 0x0000143f (0x40) IX[B]
[8] -1 0 0x00001440 - 0x0000145f (0x20) IX[B]
[9] -1 0 0x00001460 - 0x0000146f (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xf4000000 - 0xf400ffff (0x10000) MX[B]
[6] -1 0 0xf4010000 - 0xf40100ff (0x100) MX[B]
[7] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[8] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[9] -1 0 0xf5000000 - 0xf5ffffff (0x1000000) MX[B](B)
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[12] -1 0 0x00001470 - 0x00001477 (0x8) IX[B]
[13] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
[14] -1 0 0x00001400 - 0x0000143f (0x40) IX[B]
[15] -1 0 0x00001440 - 0x0000145f (0x20) IX[B]
[16] -1 0 0x00001460 - 0x0000146f (0x10) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.8.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "nv"
(II) Loading /usr/X11R6/lib/modules/drivers/nv_drv.o
(II) Module nv: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o
(II) Module kbd: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
GeForce4 440 Go 64M, Quadro4 NVS, Quadro4 500 GoGL,
GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
Quadro4 280 NVS, Quadro4 380 XGL, Quadro NVS 50 PCI, GeForce4 448 Go,
GeForce4 MX Integrated GPU, GeForce3, GeForce3 Ti 200,
GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600, GeForce4 Ti 4400,
0x0252, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
GeForce FX 5600 Ultra, GeForce FX 5600, 0x0313, GeForce FX 5600SE,
0x0316, 0x0317, GeForce FX Go5600, GeForce FX Go5650,
Quadro FX Go700, 0x031D, 0x031E, 0x031F, GeForce FX 5200,
GeForce FX 5200 Ultra, GeForce FX 5200, GeForce FX 5200SE,
GeForce FX Go5200, GeForce FX Go5250, GeForce FX 5500,
GeForce FX 5100, GeForce FX Go5200 32M/64M, 0x0329,
Quadro NVS 280 PCI, Quadro FX 500/600 PCI, GeForce FX Go53xx Series,
GeForce FX Go5100, 0x032F, GeForce FX 5900 Ultra, GeForce FX 5900,
GeForce FX 5900XT, GeForce FX 5950 Ultra, Quadro FX 700,
GeForce FX 5900ZT, Quadro FX 3000, GeForce FX 5700 Ultra,
GeForce FX 5700, GeForce FX 5700LE, GeForce FX 5700VE, 0x0345,
GeForce FX Go5700, GeForce FX Go5700, 0x0349, 0x034B,
Quadro FX Go1000, Quadro FX 1100, 0x034F, GeForce 6800 Ultra,
GeForce 6800, GeForce 6800 LE, 0x0043, GeForce 6800 GT, 0x0049,
Quadro FX 4000, Quadro FX 4400, 0x00C0, 0x00C1, GeForce 6800 LE,
0x00C8, 0x00C9, 0x00CC, 0x00CE, GeForce 6600 GT, GeForce 6600,
0x0142, 0x0143, GeForce Go 6600, GeForce 6610 XL,
GeForce Go 6600 TE/6200 TE, 0x0147, GeForce Go 6600, 0x0149, 0x014B,
0x014C, 0x014D, Quadro FX 540, GeForce 6200, 0x0160, 0x0166, 0x0210,
0x0211, 0x021D, 0x021E
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset RIVA 128 found
(II) Loading sub module "riva128"
(II) LoadModule: "riva128"
(II) Loading /usr/X11R6/lib/modules/drivers/riva128.o
(II) Module riva: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xf4000000 - 0xf400ffff (0x10000) MX[B]
[6] -1 0 0xf4010000 - 0xf40100ff (0x100) MX[B]
[7] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[8] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[9] -1 0 0xf5000000 - 0xf5ffffff (0x1000000) MX[B](B)
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[12] -1 0 0x00001470 - 0x00001477 (0x8) IX[B]
[13] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
[14] -1 0 0x00001400 - 0x0000143f (0x40) IX[B]
[15] -1 0 0x00001440 - 0x0000145f (0x20) IX[B]
[16] -1 0 0x00001460 - 0x0000146f (0x10) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xf4000000 - 0xf400ffff (0x10000) MX[B]
[6] -1 0 0xf4010000 - 0xf40100ff (0x100) MX[B]
[7] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[8] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[9] -1 0 0xf5000000 - 0xf5ffffff (0x1000000) MX[B](B)
[10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0 0x00001470 - 0x00001477 (0x8) IX[B]
[16] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
[17] -1 0 0x00001400 - 0x0000143f (0x40) IX[B]
[18] -1 0 0x00001440 - 0x0000145f (0x20) IX[B]
[19] -1 0 0x00001460 - 0x0000146f (0x10) IX[B]
[20] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[21] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) RIVA128(0): Initializing int10
(II) RIVA128(0): Primary V_BIOS segment is: 0xc000
(**) RIVA128(0): Depth 24, (--) framebuffer bpp 32
(==) RIVA128(0): RGB weight 888
(==) RIVA128(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(==) RIVA128(0): Using HW cursor
(--) RIVA128(0): Linear framebuffer at 0xFC000000
(--) RIVA128(0): MMIO registers at 0xF5000000
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) RIVA128(0): I2C bus "DDC" initialized.
(II) RIVA128(0): Probing for EDID...
(II) RIVA128(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RIVA128(0): I2C device "DDC:ddc2" removed.
(II) RIVA128(0): ... found one
(II) RIVA128(0): Manufacturer: ADI Model: 2e30 Serial#: 50406776
(II) RIVA128(0): Year: 1998 Week: 43
(II) RIVA128(0): EDID Version: 1.1
(II) RIVA128(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) RIVA128(0): Sync: Separate
(II) RIVA128(0): Max H-Image Size [cm]: horiz.: 26 vert.: 20
(II) RIVA128(0): Gamma: 2.25
(II) RIVA128(0): DPMS capabilities: Suspend Off; RGB/Color Display
(II) RIVA128(0): redX: 0.625 redY: 0.340 greenX: 0.310 greenY: 0.592
(II) RIVA128(0): blueX: 0.150 blueY: 0.063 whiteX: 0.281 whiteY: 0.311
(II) RIVA128(0): Supported VESA Video Modes:
(II) RIVA128(0): 720x400@70Hz
(II) RIVA128(0): 640x480@60Hz
(II) RIVA128(0): 800x600@75Hz
(II) RIVA128(0): 832x624@75Hz
(II) RIVA128(0): 1024x768@60Hz
(II) RIVA128(0): 1024x768@75Hz
(II) RIVA128(0): Manufacturer's mask: 0
(II) RIVA128(0): Supported Future Video Modes:
(II) RIVA128(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) RIVA128(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) RIVA128(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RIVA128(0): #3: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) RIVA128(0): Supported additional Video Mode:
(II) RIVA128(0): clock: 108.0 MHz Image Size: 260 x 200 mm
(II) RIVA128(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RIVA128(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RIVA128(0): Ranges: V min: 50 V max: 100 Hz, H min: 30 H max: 69 kHz,
(II) RIVA128(0): Serial No: 843L10312578
(II) RIVA128(0): Monitor name: ADI CORP
(--) RIVA128(0): VideoRAM: 8192 kBytes
(==) RIVA128(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RIVA128(0): My Monitor: Using hsync range of 31.50-48.50 kHz
(II) RIVA128(0): My Monitor: Using vrefresh range of 50.00-70.00 Hz
(II) RIVA128(0): Clock range: 12.00 to 256.00 MHz
(II) RIVA128(0): Not using default mode "640x350" (vrefresh out of range)
(II) RIVA128(0): Not using default mode "320x175" (vrefresh out of range)
(II) RIVA128(0): Not using default mode "640x400" (vrefresh out of range)
(II) RIVA128(0): Not using default mode "320x200" (vrefresh out of range)
(II) RIVA128(0): Not using default mode "720x400" (vrefresh out of range)
(II) RIVA128(0): Not using default mode "360x200" (vrefresh out of range)
(WW) (640x480,My Monitor) mode clock 25.2MHz exceeds DDC maximum 0MHz
(WW) (320x240,My Monitor) mode clock 12.6MHz exceeds DDC maximum 0MHz
(II) RIVA128(0): Not using default mode "640x480" (vrefresh out of range)
(II) RIVA128(0): Not using default mode "320x240" (vrefresh out of range)
(II) RIVA128(0): Not using default mode "640x480" (vrefresh out of range)
(II) RIVA128(0): Not using default mode "320x240" (vrefresh out of range)
(II) RIVA128(0): Not using default mode "640x480" (vrefresh out of range)
(II) RIVA128(0): Not using default mode "320x240" (vrefresh out of range)
(WW) (800x600,My Monitor) mode clock 36MHz exceeds DDC maximum 0MHz
(WW) (400x300,My Monitor) mode clock 18MHz exceeds DDC maximum 0MHz
(WW) (800x600,My Monitor) mode clock 40MHz exceeds DDC maximum 0MHz
(WW) (400x300,My Monitor) mode clock 20MHz exceeds DDC maximum 0MHz
(II) RIVA128(0): Not using default mode "800x600" (vrefresh out of range)
(II) RIVA128(0): Not using default mode "400x300" (vrefresh out of range)
(II) RIVA128(0): Not using default mode "800x600" (vrefresh out of range)
(II) RIVA128(0): Not using default mode "400x300" (vrefresh out of range)
(II) RIVA128(0): Not using default mode "800x600" (hsync out of range)
(II) RIVA128(0): Not using default mode "400x300" (hsync out of range)
(II) RIVA128(0): Not using default mode "1024x768" (vrefresh out of range)
(II) RIVA128(0): Not using default mode "512x384" (vrefresh out of range)
(WW) (1024x768,My Monitor) mode clock 65MHz exceeds DDC maximum 0MHz
(WW) (512x384,My Monitor) mode clock 32.5MHz exceeds DDC maximum 0MHz
(II) RIVA128(0): Not using default mode "1024x768" (hsync out of range)
(II) RIVA128(0): Not using default mode "512x384" (hsync out of range)
(II) RIVA128(0): Not using default mode "1024x768" (hsync out of range)
(II) RIVA128(0): Not using default mode "512x384" (hsync out of range)
(II) RIVA128(0): Not using default mode "1024x768" (hsync out of range)
(II) RIVA128(0): Not using default mode "512x384" (hsync out of range)
(II) RIVA128(0): Not using default mode "1152x864" (hsync out of range)
(II) RIVA128(0): Not using default mode "576x432" (hsync out of range)
(II) RIVA128(0): Not using default mode "1280x960" (hsync out of range)
(II) RIVA128(0): Not using default mode "640x480" (hsync out of range)
(II) RIVA128(0): Not using default mode "1280x960" (hsync out of range)
(II) RIVA128(0): Not using default mode "640x480" (hsync out of range)
(II) RIVA128(0): Not using default mode "1280x1024" (hsync out of range)
(II) RIVA128(0): Not using default mode "640x512" (hsync out of range)
(II) RIVA128(0): Not using default mode "1280x1024" (hsync out of range)
(II) RIVA128(0): Not using default mode "640x512" (hsync out of range)
(II) RIVA128(0): Not using default mode "1280x1024" (hsync out of range)
(II) RIVA128(0): Not using default mode "640x512" (hsync out of range)
(II) RIVA128(0): Not using default mode "1600x1200" (hsync out of range)
(II) RIVA128(0): Not using default mode "800x600" (hsync out of range)
(II) RIVA128(0): Not using default mode "1600x1200" (hsync out of range)
(II) RIVA128(0): Not using default mode "800x600" (hsync out of range)
(II) RIVA128(0): Not using default mode "1600x1200" (hsync out of range)
(II) RIVA128(0): Not using default mode "800x600" (hsync out of range)
(II) RIVA128(0): Not using default mode "1600x1200" (hsync out of range)
(II) RIVA128(0): Not using default mode "800x600" (hsync out of range)
(II) RIVA128(0): Not using default mode "1600x1200" (hsync out of range)
(II) RIVA128(0): Not using default mode "800x600" (hsync out of range)
(II) RIVA128(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) RIVA128(0): Not using default mode "896x672" (hsync out of range)
(II) RIVA128(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) RIVA128(0): Not using default mode "896x672" (hsync out of range)
(II) RIVA128(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) RIVA128(0): Not using default mode "928x696" (hsync out of range)
(II) RIVA128(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) RIVA128(0): Not using default mode "928x696" (hsync out of range)
(II) RIVA128(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) RIVA128(0): Not using default mode "960x720" (hsync out of range)
(II) RIVA128(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) RIVA128(0): Not using default mode "960x720" (hsync out of range)
(II) RIVA128(0): Not using default mode "832x624" (hsync out of range)
(II) RIVA128(0): Not using default mode "416x312" (hsync out of range)
(WW) (1152x768,My Monitor) mode clock 64.995MHz exceeds DDC maximum 0MHz
(WW) (576x384,My Monitor) mode clock 32.497MHz exceeds DDC maximum 0MHz
(II) RIVA128(0): Not using default mode "1400x1050" (hsync out of range)
(II) RIVA128(0): Not using default mode "700x525" (hsync out of range)
(II) RIVA128(0): Not using default mode "1400x1050" (hsync out of range)
(II) RIVA128(0): Not using default mode "700x525" (hsync out of range)
(II) RIVA128(0): Not using default mode "1600x1024" (hsync out of range)
(II) RIVA128(0): Not using default mode "800x512" (hsync out of range)
(II) RIVA128(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) RIVA128(0): Not using default mode "960x720" (hsync out of range)
(II) RIVA128(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) RIVA128(0): Not using default mode "1024x768" (hsync out of range)
(II) RIVA128(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) RIVA128(0): Not using default mode "1024x768" (hsync out of range)
(II) RIVA128(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) RIVA128(0): Not using default mode "1024x768" (hsync out of range)
(II) RIVA128(0): Not using mode "1280x1024" (no mode of this name)
(II) RIVA128(0): Not using default mode "1152x768" (width too large for virtual size)
(--) RIVA128(0): Virtual size is 1024x768 (pitch 1024)
(**) RIVA128(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) RIVA128(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(**) RIVA128(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) RIVA128(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) RIVA128(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) RIVA128(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(**) RIVA128(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) RIVA128(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(**) RIVA128(0): Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D)
(II) RIVA128(0): Modeline "576x384" 32.50 576 589 657 736 384 385 388 403 doublescan +hsync +vsync
(**) RIVA128(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) RIVA128(0): Modeline "512x384" 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync
(**) RIVA128(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) RIVA128(0): Modeline "400x300" 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync
(**) RIVA128(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) RIVA128(0): Modeline "400x300" 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync
(**) RIVA128(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) RIVA128(0): Modeline "320x240" 12.60 320 328 376 400 240 245 246 262 doublescan -hsync -vsync
(--) RIVA128(0): Display dimensions: (260, 200) mm
(--) RIVA128(0): DPI set to (100, 97)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B]
[1] 0 0 0xf5000000 - 0xf5ffffff (0x1000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xf4000000 - 0xf400ffff (0x10000) MX[B]
[8] -1 0 0xf4010000 - 0xf40100ff (0x100) MX[B]
[9] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[10] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[11] -1 0 0xf5000000 - 0xf5ffffff (0x1000000) MX[B](B)
[12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x00001470 - 0x00001477 (0x8) IX[B]
[18] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
[19] -1 0 0x00001400 - 0x0000143f (0x40) IX[B]
[20] -1 0 0x00001440 - 0x0000145f (0x20) IX[B]
[21] -1 0 0x00001460 - 0x0000146f (0x10) IX[B]
[22] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[23] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) RIVA128(0): Write-combining range (0xfc000000,0x800000)
(II) RIVA128(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
10 256x256 slots
(==) RIVA128(0): Backing store disabled
(==) RIVA128(0): Silken mouse enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "Protocol" "Auto"
(**) Serial Mouse: Device: "/dev/mouse"
(**) Serial Mouse: Protocol: "Auto"
(**) Option "CorePointer"
(**) Serial Mouse: Core Pointer
(**) Option "Device" "/dev/mouse"
(==) Serial Mouse: Emulate3Buttons, Emulate3Timeout: 50
(==) Serial Mouse: Buttons: 3
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard

Inviato: mar 24 gen 2006, 23:32
da Luci0
Hai provato con una SLAX a vedere l'effetto che fa...??

... per caso hai attivato gpm ??

Inviato: mar 24 gen 2006, 23:42
da prione
Luci0 ha scritto:Hai provato con una SLAX a vedere l'effetto che fa...??

... per caso hai attivato gpm ??
Una slax ce l'ho, ma non funge :(
Però ho anche una knoppix e con quella tutto ok.
Quanto a gpm sì l'ho installato.
È un problema?
Ciao!

Inviato: mer 25 gen 2006, 1:22
da meritil
che kernel usi? e che mouse è?


per esempio se usi un 2.6.x metti come device /dev/input/mice e dentro /etc/rc.d/rc.module una riga del tipo "modprobe psmouse" o "modprobe sermouse" se fosse seriale...



Ciao

Inviato: mer 25 gen 2006, 1:24
da meritil
ho riletto meglio il thread.. forse ti basta "modprobe sermouse"

il mouse è seriale ho capito bene no?

Inviato: mer 25 gen 2006, 8:13
da prione
meritil ha scritto:ho riletto meglio il thread.. forse ti basta "modprobe sermouse"

il mouse è seriale ho capito bene no?
Hai capito bene!
Il kernel è il 2.4.31 le indicazioni che mi hai dato valgono lo stesso?
.

Inviato: mer 25 gen 2006, 9:51
da meritil
/dev/input/mice è roba di udev quindi con il 2.4 a meno che tu non l'abbia volutamente preferito a devs non vale...


modprobe sermouse invece funziona, prova... male che va non succede nulla..


Ciao


ps: ma da dove l'hai tirato fuori un mouse seriale?

Inviato: mer 25 gen 2006, 20:45
da prione
meritil ha scritto:/dev/input/mice è roba di udev quindi con il 2.4 a meno che tu non l'abbia volutamente preferito a devs non vale...
modprobe sermouse invece funziona, prova... male che va non succede nulla..
prima di editare rc.modules ho digitato:
bash-3.00# modprobe -l | grep mouse
/lib/modules/2.4.31/kernel/drivers/char/atixlmouse.o.gz
/lib/modules/2.4.31/kernel/drivers/char/busmouse.o.gz
/lib/modules/2.4.31/kernel/drivers/char/logibusmouse.o.gz
/lib/modules/2.4.31/kernel/drivers/char/msbusmouse.o.gz
/lib/modules/2.4.31/kernel/drivers/char/obmouse.o.gz
/lib/modules/2.4.31/kernel/drivers/char/qpmouse.o.gz
/lib/modules/2.4.31/kernel/drivers/input/mousedev.o.gz
/lib/modules/2.4.31/kernel/drivers/usb/usbmouse.o.gz
bash-3.00#
mi sa che non funziona...


Ciao
meritil ha scritto: ps: ma da dove l'hai tirato fuori un mouse seriale?
ci sono affezionato :wink:

Inviato: gio 26 gen 2006, 19:03
da prione
prione ha scritto:
meritil ha scritto:/dev/input/mice è roba di udev quindi con il 2.4 a meno che tu non l'abbia volutamente preferito a devs non vale...
modprobe sermouse invece funziona, prova... male che va non succede nulla..
prima di editare rc.modules ho digitato:
bash-3.00# modprobe -l | grep mouse
/lib/modules/2.4.31/kernel/drivers/char/atixlmouse.o.gz
/lib/modules/2.4.31/kernel/drivers/char/busmouse.o.gz
/lib/modules/2.4.31/kernel/drivers/char/logibusmouse.o.gz
/lib/modules/2.4.31/kernel/drivers/char/msbusmouse.o.gz
/lib/modules/2.4.31/kernel/drivers/char/obmouse.o.gz
/lib/modules/2.4.31/kernel/drivers/char/qpmouse.o.gz
/lib/modules/2.4.31/kernel/drivers/input/mousedev.o.gz
/lib/modules/2.4.31/kernel/drivers/usb/usbmouse.o.gz
bash-3.00#
mi sa che non funziona...


Ciao
meritil ha scritto: ps: ma da dove l'hai tirato fuori un mouse seriale?
ci sono affezionato :wink:
Adesso funziona!
In effetti basta un po' di formaggio e il topolino arriva!
A parte gli scherzi ho usato nuovamente mouseconfig ( lo avevo usato dopo l'installazione ) dando esattamente gli stessi parametri ( logitech serialmouse e attivazione di gpm ) e stavolta tutto ok, a quanto pare.
Chissà perchè la prima volta non aveva funzionato? Mah!
Grazie a tutti per l'attenzione!
Ciao!

Inviato: gio 26 gen 2006, 19:47
da Luci0
Ora ricordo ...a volte i mouse seriali non si inizializzano correttamente... in tal caso (al contrario dei PS/2) basta staccarli e ricollegarli... !!!
... almeno succedeva così con il DOS 6.20 e win 3.1 da una lotto di 50 mouse ricordo di aver tagliato via condensatore di filtro da 1microF che impediva una corretta inizializzazione all' accensione del PC ( ... 486 )..

Inviato: gio 26 gen 2006, 20:11
da prione
Luci0 ha scritto:Ora ricordo ...a volte i mouse seriali non si inizializzano correttamente... in tal caso (al contrario dei PS/2) basta staccarli e ricollegarli... !!!
... almeno succedeva così con il DOS 6.20 e win 3.1 da una lotto di 50 mouse ricordo di aver tagliato via condensatore di filtro da 1microF che impediva una corretta inizializzazione all' accensione del PC ( ... 486 )..
Interessante, non lo avevo mai sentito.
Probabilmente quel condensatore introduceva un ritardo/distorsione del segnale.
Ciao!
Tutti gli orari sono UTC+02:00
Pagina 1 di 1

Creato da phpBB® Forum Software © phpBB Limited

Traduzione Italiana phpBB-Store.it