slacky.eu

Ho installato il kernel 2.6.18 con il config di Pat, e adesso ho l'ADSL che non và, ho un modem-router us robotics, che non mi ha dato mai problemi, qui nel forum ho visto che per capire csa non va bisogna dare un po' di comandi:
lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP]
00:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:07.0 Communication controller: Conexant HSF 56k HSFi Modem (rev 01)
00:0a.0 PCI bridge: Intel Corporation 21152 PCI-to-PCI Bridge
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1)
02:04.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
02:08.0 Multimedia controller: C-Cube Microsystems E4? (rev b1)
02:0c.0 FireWire (IEEE 1394): Texas Instruments TSB12LV26 IEEE-1394 Controller (Link)

lsmod
Module Size Used by
i82365 23008 1
snd_seq_dummy 2948 0
snd_seq_oss 29056 0
snd_seq_midi_event 6016 1 snd_seq_oss
snd_seq 43856 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_pcm_oss 42144 0
snd_mixer_oss 14976 1 snd_pcm_oss
ipv6 225248 12
sg 26780 0
pcmcia 30372 0
firmware_class 7424 1 pcmcia
yenta_socket 24204 0
rsrc_nonstatic 10880 2 i82365,yenta_socket
pcmcia_core 34064 4 i82365,pcmcia,yenta_socket,rsrc_nonstatic
ide_scsi 13444 0
psmouse 35464 0
usblp 11392 0
shpchp 33052 0
snd_via82xx 22808 0
gameport 11144 1 snd_via82xx
snd_ac97_codec 86944 1 snd_via82xx
snd_ac97_bus 2176 1 snd_ac97_codec
snd_pcm 67720 3 snd_pcm_oss,snd_via82xx,snd_ac97_codec
snd_timer 19460 2 snd_seq,snd_pcm
snd_page_alloc 7816 2 snd_via82xx,snd_pcm
snd_mpu401_uart 6528 1 snd_via82xx
snd_rawmidi 18848 1 snd_mpu401_uart
snd_seq_device 6540 4 snd_seq_dummy,snd_seq_oss,snd_seq,snd_rawmidi
snd 42724 11 snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 7264 1 snd
ohci1394 30256 0
serio_raw 5380 0
ieee1394 83896 1 ohci1394
uhci_hcd 20748 0
ehci_hcd 29192 0
i2c_viapro 7700 0
i2c_core 16784 1 i2c_viapro
evdev 8192 0
via_agp 7936 1
agpgart 28208 1 via_agp
pcspkr 2560 0
8139too 21632 0
mii 4992 1 8139too


dmesg | grep eth
NULLA

tail -f /var/log/messages
Oct 5 11:08:02 darkstar kernel: Intel ISA PCIC probe: not found.
Oct 5 11:08:04 darkstar last message repeated 131 times
Oct 5 11:08:04 darkstar /usr/sbin/gpm[9875]: *** info [client.c(275)]:
Oct 5 11:08:04 darkstar /usr/sbin/gpm[9875]: Request on 6 (console 1)
Oct 5 11:08:04 darkstar /usr/sbin/gpm[9875]: *** info [client.c(284)]:
Oct 5 11:08:04 darkstar /usr/sbin/gpm[9875]: Closing
Oct 5 11:08:04 darkstar kernel: Intel ISA PCIC probe: not found.
Oct 5 11:08:35 darkstar last message repeated 1340 times
Oct 5 11:09:36 darkstar last message repeated 3052 times
Oct 5 11:10:37 darkstar last message repeated 3469 times

non è che ci ho capito un granchè, mi aiutate?? Grazie.

Beh, diciamo che quei comandi servono a seconda dei casi. Innanzitutto il router è raggiungibile? Ovvero se dai cosa ti dà?