slacky.eu


https://slacky.eu/forum/

[Risolto] problema Boot con kernel 2.6.24.3

https://slacky.eu/forum/viewtopic.php?f=1&t=23633

Pagina 1 di 1

[Risolto] problema Boot con kernel 2.6.24.3

Inviato: sab 15 mar 2008, 16:17
da paZ_
Salve a todos
mi presento.. sono paZ_ sotto consiglio di sardylan son passato alla distro slack sia per motivi di studio sia perche' con kubuntu avevo tutti i tool grafici che consumavano una marea di risorse..
comunque bando alle ciance.. vi espongo il mio problema..

sono partito dalla slackware 12 con kernel base.. pero', visto i noti problemi di sicurezza, ho deciso di passare al nuovo kernel.. allora con l'aiuto di sardylan ho aggiornato al 2.6.24.3.

e qui nasce il problema.. praticamente all'avvio mi va in blocco tutto il sistema per 15/20 sec con un mess del tipo clocksource -numeri vari.. e purtroppo non so come sistemare..

vi copio tutte le info del mio pc + i vari log se possono aiutare nella configurazione..
(purtroppo non so dove trovare l'output della mia configurazione del kernel.. se mi dite dove trovarla vi copio anche quella)

config pc

Codice: Seleziona tutto

    *  Processore: Intel® Pentium® M 740 1.73 Ghz con 2MB Cache L2 e 533Mhz FSB. Supporta Enhanced Intel® SpeedStep® Technology
    * Chipset: Intel® 915PM Express chipset
    * Memoria RAM: 1GB DDR2
    * Hard disk: 80GB 4200RPM
    * Scheda video: ATI Mobility Radeon X700 con 256MB di RAM dedicata
    * Schermo: 15.4' WXGA con risoluzione massima di 1280x800
    * Scheda audio: Intel ICH6 AC97
    * Masterizzatore DVD: MATSHITA UJ-840D (Double Layer)
    * Rete
          o Wireless: Intel PRO/Wireless 2200BG
          o Wired: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet
          o Modem: AC97 SoftV92 Data Fax Modem with SmartCP
    * Lettore PCMCIA: Texas Instruments PCIxx21/x515 Cardbus Controller
    * Lettore memorie flash: Texas Instruments PCIxx21 Integrated FlashMedia Controller. Legge SD, Memory Stick, Memory Stick PRO, MultiMediaCard.
    * Misc: bluetooth, irda, firewire


lspci

Codice: Seleziona tutto

00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04)
00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 04)
00:1c.2 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 04)
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 04)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility X700 (PCIE)
06:01.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
06:01.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
06:01.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
06:03.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)
06:08.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03)
fstab

Codice: Seleziona tutto

/dev/hda2        swap             swap        defaults         0   0
/dev/hda1        /                ext3        defaults         1   1
/dev/hda3        /mnt/windows     ntfs        rw               1   0
/dev/cdrom       /mnt/cdrom       auto        noauto,users,ro  0   0
shm              /dev/shm         tmpfs       defaults         0   0
devpts           /dev/pts         devpts      gid=5,mode=620   0   0
proc             /proc            proc        defaults         0   0
/var/log/messages

Codice: Seleziona tutto

Mar 15 15:04:02 elettronicS kernel: [    0.000000] BIOS-provided physical RAM map:
Mar 15 15:04:02 elettronicS kernel: [    0.000000] 126MB HIGHMEM available.
Mar 15 15:04:02 elettronicS kernel: [    0.000000] 896MB LOWMEM available.
Mar 15 15:04:02 elettronicS kernel: [    0.000000] DMI present.
Mar 15 15:04:02 elettronicS kernel: [    0.000000] ACPI: DMI detected: Acer
Mar 15 15:04:02 elettronicS kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x1008
Mar 15 15:04:02 elettronicS kernel: [    0.000000] Kernel command line: auto BOOT_IMAGE=Rebuild ro root=301
Mar 15 15:04:02 elettronicS kernel: [    0.000000] Enabling fast FPU save and restore... done.
Mar 15 15:04:02 elettronicS kernel: [    0.000000] Enabling unmasked SIMD FPU exception support... done.
Mar 15 15:04:02 elettronicS kernel: [    0.000000] Initializing CPU#0
Mar 15 15:04:02 elettronicS kernel: [   11.180635] console [tty0] enabled
Mar 15 15:04:02 elettronicS kernel: [   11.181084] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Mar 15 15:04:02 elettronicS kernel: [   11.181566] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Mar 15 15:04:02 elettronicS kernel: [   11.206924] Memory: 1030380k/1047040k available (4979k kernel code, 16032k reserved, 1501k data, 236k init, 129536k highmem)
Mar 15 15:04:02 elettronicS kernel: [   11.287080] Security Framework initialized
Mar 15 15:04:02 elettronicS kernel: [   11.287092] Capability LSM initialized
Mar 15 15:04:02 elettronicS kernel: [   11.287213] CPU: L1 I cache: 32K, L1 D cache: 32K
Mar 15 15:04:02 elettronicS kernel: [   11.287219] CPU: L2 cache: 2048K
Mar 15 15:04:02 elettronicS kernel: [   11.287228] Intel machine check architecture supported.
Mar 15 15:04:02 elettronicS kernel: [   11.287235] Intel machine check reporting enabled on CPU#0.
Mar 15 15:04:02 elettronicS kernel: [   11.287259] Checking 'hlt' instruction... OK.
Mar 15 15:04:02 elettronicS kernel: [   11.303498] Freeing SMP alternatives: 0k freed
Mar 15 15:04:02 elettronicS kernel: [   11.303503] ACPI: Core revision 20070126
Mar 15 15:04:02 elettronicS kernel: [   11.307886] net_namespace: 64 bytes
Mar 15 15:04:02 elettronicS kernel: [   11.308274] NET: Registered protocol family 16
Mar 15 15:04:02 elettronicS kernel: [   11.308421] ACPI: bus type pci registered
Mar 15 15:04:02 elettronicS kernel: [   11.308433] PCI: Using MMCONFIG
Mar 15 15:04:02 elettronicS kernel: [   11.875055] ACPI: Interpreter enabled
Mar 15 15:04:02 elettronicS kernel: [   11.875062] ACPI: (supports S0 S3 S4 S5)
Mar 15 15:04:02 elettronicS kernel: [   11.875076] ACPI: Using PIC for interrupt routing
Mar 15 15:04:02 elettronicS kernel: [   11.875391] ACPI: EC: non-query interrupt received, switching to interrupt mode
Mar 15 15:04:02 elettronicS kernel: [   11.899752] ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
Mar 15 15:04:02 elettronicS kernel: [   11.899758] ACPI: EC: driver started in interrupt mode
Mar 15 15:04:02 elettronicS kernel: [   11.899792] ACPI: PCI Root Bridge [PCI0] (0000:00)
Mar 15 15:04:02 elettronicS kernel: [   11.900783] PCI: Transparent bridge - 0000:00:1e.0
Mar 15 15:04:02 elettronicS kernel: [   11.906097] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
Mar 15 15:04:02 elettronicS kernel: [   11.906194] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
Mar 15 15:04:02 elettronicS kernel: [   11.906292] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
Mar 15 15:04:02 elettronicS kernel: [   11.906387] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
Mar 15 15:04:02 elettronicS kernel: [   11.906481] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
Mar 15 15:04:02 elettronicS kernel: [   11.906576] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
Mar 15 15:04:02 elettronicS kernel: [   11.906672] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
Mar 15 15:04:02 elettronicS kernel: [   11.906768] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
Mar 15 15:04:02 elettronicS kernel: [   11.906894] Linux Plug and Play Support v0.97 (c) Adam Belay
Mar 15 15:04:02 elettronicS kernel: [   11.906921] pnp: PnP ACPI init
Mar 15 15:04:02 elettronicS kernel: [   11.906930] ACPI: bus type pnp registered
Mar 15 15:04:02 elettronicS kernel: [   11.909275] pnp: PnP ACPI: found 9 devices
Mar 15 15:04:02 elettronicS kernel: [   11.909280] ACPI: ACPI bus type pnp unregistered
Mar 15 15:04:02 elettronicS kernel: [   11.909437] SCSI subsystem initialized
Mar 15 15:04:02 elettronicS kernel: [   11.909551] usbcore: registered new interface driver usbfs
Mar 15 15:04:02 elettronicS kernel: [   11.909600] usbcore: registered new interface driver hub
Mar 15 15:04:02 elettronicS kernel: [   11.909634] usbcore: registered new device driver usb
Mar 15 15:04:02 elettronicS kernel: [   11.909830] PCI: Using ACPI for IRQ routing
Mar 15 15:04:02 elettronicS kernel: [   11.909835] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Mar 15 15:04:02 elettronicS kernel: [   11.910876] NET: Registered protocol family 23
Mar 15 15:04:02 elettronicS kernel: [   11.910903] Bluetooth: Core ver 2.11
Mar 15 15:04:02 elettronicS kernel: [   11.910986] NET: Registered protocol family 31
Mar 15 15:04:02 elettronicS kernel: [   11.910990] Bluetooth: HCI device and connection manager initialized
Mar 15 15:04:02 elettronicS kernel: [   11.910996] Bluetooth: HCI socket layer initialized
Mar 15 15:04:02 elettronicS kernel: [   11.915134] Time: tsc clocksource has been installed.
Mar 15 15:04:02 elettronicS kernel: [   11.923160] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
Mar 15 15:04:02 elettronicS kernel: [   11.923168] system 00:01: iomem range 0xf0000000-0xf0003fff could not be reserved
Mar 15 15:04:02 elettronicS kernel: [   11.923175] system 00:01: iomem range 0xf0004000-0xf0004fff could not be reserved
Mar 15 15:04:02 elettronicS kernel: [   11.923182] system 00:01: iomem range 0xf0005000-0xf0005fff could not be reserved
Mar 15 15:04:02 elettronicS kernel: [   11.923189] system 00:01: iomem range 0xf0008000-0xf000bfff could not be reserved
Mar 15 15:04:02 elettronicS kernel: [   11.923196] system 00:01: iomem range 0xfed20000-0xfed8ffff could not be reserved
Mar 15 15:04:02 elettronicS kernel: [   11.923206] system 00:04: ioport range 0x680-0x6ff has been reserved
Mar 15 15:04:02 elettronicS kernel: [   11.923211] system 00:04: ioport range 0x800-0x80f has been reserved
Mar 15 15:04:02 elettronicS kernel: [   11.923217] system 00:04: ioport range 0x1000-0x107f has been reserved
Mar 15 15:04:02 elettronicS kernel: [   11.923222] system 00:04: ioport range 0x1180-0x11bf has been reserved
Mar 15 15:04:02 elettronicS kernel: [   11.923228] system 00:04: ioport range 0x1600-0x167f has been reserved
Mar 15 15:04:02 elettronicS kernel: [   11.953577] PCI: Bridge: 0000:00:01.0
Mar 15 15:04:02 elettronicS kernel: [   11.953582]   IO window: 3000-3fff
Mar 15 15:04:02 elettronicS kernel: [   11.953586]   MEM window: b0100000-b01fffff
Mar 15 15:04:02 elettronicS kernel: [   11.953591]   PREFETCH window: c0000000-cfffffff
Mar 15 15:04:02 elettronicS kernel: [   11.953595] PCI: Bridge: 0000:00:1c.0
Mar 15 15:04:02 elettronicS kernel: [   11.953598]   IO window: disabled.
Mar 15 15:04:02 elettronicS kernel: [   11.953603]   MEM window: disabled.
Mar 15 15:04:02 elettronicS kernel: [   11.953607]   PREFETCH window: disabled.
Mar 15 15:04:02 elettronicS kernel: [   11.953613] PCI: Bridge: 0000:00:1c.1
Mar 15 15:04:02 elettronicS kernel: [   11.953616]   IO window: disabled.
Mar 15 15:04:02 elettronicS kernel: [   11.953621]   MEM window: disabled.
Mar 15 15:04:02 elettronicS kernel: [   11.953625]   PREFETCH window: disabled.
Mar 15 15:04:02 elettronicS kernel: [   11.953630] PCI: Bridge: 0000:00:1c.2
Mar 15 15:04:02 elettronicS kernel: [   11.953633]   IO window: disabled.
Mar 15 15:04:02 elettronicS kernel: [   11.953638]   MEM window: disabled.
Mar 15 15:04:02 elettronicS kernel: [   11.953642]   PREFETCH window: disabled.
Mar 15 15:04:02 elettronicS kernel: [   11.953678] PCI: Bridge: 0000:00:1e.0
Mar 15 15:04:02 elettronicS kernel: [   11.953681]   IO window: disabled.
Mar 15 15:04:02 elettronicS kernel: [   11.953686]   MEM window: b0200000-b02fffff
Mar 15 15:04:02 elettronicS kernel: [   11.953691]   PREFETCH window: disabled.
Mar 15 15:04:02 elettronicS kernel: [   11.953854] ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
Mar 15 15:04:02 elettronicS kernel: [   11.954014] ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
Mar 15 15:04:02 elettronicS kernel: [   11.954037] ACPI: PCI Interrupt 0000:00:1c.1[B] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
Mar 15 15:04:02 elettronicS kernel: [   11.954192] ACPI: PCI Interrupt 0000:00:1c.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
Mar 15 15:04:02 elettronicS kernel: [   11.954352] ACPI: PCI Interrupt 0000:06:01.0[A] -> Link [LNKG] -> GSI 10 (level, low) -> IRQ 10
Mar 15 15:04:02 elettronicS kernel: [   11.954377] NET: Registered protocol family 2
Mar 15 15:04:02 elettronicS kernel: [   11.991153] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Mar 15 15:04:02 elettronicS kernel: [   11.991383] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Mar 15 15:04:02 elettronicS kernel: [   11.992223] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
Mar 15 15:04:02 elettronicS kernel: [   11.992496] TCP: Hash tables configured (established 131072 bind 65536)
Mar 15 15:04:02 elettronicS kernel: [   11.992502] TCP reno registered
Mar 15 15:04:02 elettronicS kernel: [   12.003328] Simple Boot Flag at 0x36 set to 0x1
Mar 15 15:04:02 elettronicS kernel: [   12.003742] VFS: Disk quotas dquot_6.5.1
Mar 15 15:04:02 elettronicS kernel: [   12.003914] NTFS driver 2.1.29 [Flags: R/W].
Mar 15 15:04:02 elettronicS kernel: [   12.003963] JFS: nTxBlock = 8051, nTxLock = 64413
Mar 15 15:04:02 elettronicS kernel: [   12.009998] SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
Mar 15 15:04:02 elettronicS kernel: [   12.010227] SGI XFS Quota Management subsystem
Mar 15 15:04:02 elettronicS kernel: [   12.010237] OCFS2 1.3.3
Mar 15 15:04:02 elettronicS kernel: [   12.010272] OCFS2 Node Manager 1.3.3
Mar 15 15:04:02 elettronicS kernel: [   12.010475] OCFS2 DLM 1.3.3
Mar 15 15:04:02 elettronicS kernel: [   12.010499] OCFS2 DLMFS 1.3.3
Mar 15 15:04:02 elettronicS kernel: [   12.010620] io scheduler noop registered
Mar 15 15:04:02 elettronicS kernel: [   12.010625] io scheduler anticipatory registered
Mar 15 15:04:02 elettronicS kernel: [   12.010629] io scheduler deadline registered
Mar 15 15:04:02 elettronicS kernel: [   12.010651] io scheduler cfq registered (default)
Mar 15 15:04:02 elettronicS kernel: [   12.011601] vesafb: framebuffer at 0xc0000000, mapped to 0xf8d00000, using 3072k, total 16384k
Mar 15 15:04:02 elettronicS kernel: [   12.011609] vesafb: mode is 1024x768x16, linelength=2048, pages=9
Mar 15 15:04:02 elettronicS kernel: [   12.011614] vesafb: protected mode interface info at c000:ae68
Mar 15 15:04:02 elettronicS kernel: [   12.011619] vesafb: pmi: set display start = c00caef6, set palette = c00caf36
Mar 15 15:04:02 elettronicS kernel: [   12.011624] vesafb: scrolling: redraw
Mar 15 15:04:02 elettronicS kernel: [   12.011628] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Mar 15 15:04:02 elettronicS kernel: [   12.052881] fb0: VESA VGA frame buffer device
Mar 15 15:04:02 elettronicS kernel: [   12.054638] ACPI: AC Adapter [ACAD] (on-line)
Mar 15 15:04:02 elettronicS kernel: [   12.054917] ACPI: Battery Slot [BAT1] (battery absent)
Mar 15 15:04:02 elettronicS kernel: [   12.055178] ACPI: Battery Slot [BAT2] (battery absent)
Mar 15 15:04:02 elettronicS kernel: [   12.055488] input: Power Button (FF) as /devices/virtual/input/input0
Mar 15 15:04:02 elettronicS kernel: [   12.055752] ACPI: Power Button (FF) [PWRF]
Mar 15 15:04:02 elettronicS kernel: [   12.055979] input: Lid Switch as /devices/virtual/input/input1
Mar 15 15:04:02 elettronicS kernel: [   12.056273] ACPI: Lid Switch [LID]
Mar 15 15:04:02 elettronicS kernel: [   12.056464] input: Power Button (CM) as /devices/virtual/input/input2
Mar 15 15:04:02 elettronicS kernel: [   12.056728] ACPI: Power Button (CM) [PWRB]
Mar 15 15:04:02 elettronicS kernel: [   12.056947] input: Sleep Button (CM) as /devices/virtual/input/input3
Mar 15 15:04:02 elettronicS kernel: [   12.057210] ACPI: Sleep Button (CM) [SLPB]
Mar 15 15:04:02 elettronicS kernel: [   12.057664] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
Mar 15 15:04:02 elettronicS kernel: [   12.057961] ACPI: Processor [CPU0] (supports 8 throttling states)
Mar 15 15:04:02 elettronicS kernel: [   12.061377] ACPI: Thermal Zone [THRM] (35 C)
Mar 15 15:04:02 elettronicS kernel: [   12.061562] isapnp: Scanning for PnP cards...
Mar 15 15:04:02 elettronicS kernel: [   12.371425] isapnp: No Plug & Play device found
Mar 15 15:04:02 elettronicS kernel: [   12.401791] Time: hpet clocksource has been installed.
Mar 15 15:04:02 elettronicS kernel: [   12.430013] Real Time Clock Driver v1.12ac
Mar 15 15:04:02 elettronicS kernel: [   12.436704] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Mar 15 15:04:02 elettronicS kernel: [   12.444331] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
Mar 15 15:04:02 elettronicS kernel: [   12.458899] ACPI: PCI Interrupt 0000:00:1e.3[B] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
Mar 15 15:04:02 elettronicS kernel: [   12.466239] ACPI: PCI interrupt for device 0000:00:1e.3 disabled
Mar 15 15:04:02 elettronicS kernel: [   12.481894] loop: module loaded
Mar 15 15:04:02 elettronicS kernel: [   12.489478] tg3.c:v3.86 (November 9, 2007)
Mar 15 15:04:02 elettronicS kernel: [   12.497055] ACPI: PCI Interrupt 0000:06:08.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
Mar 15 15:04:02 elettronicS kernel: [   12.531166] eth0: Tigon3 [partno(BCM95705A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:16:36:3e:e5:76
Mar 15 15:04:02 elettronicS kernel: [   12.547756] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
Mar 15 15:04:02 elettronicS kernel: [   12.556485] eth0: dma_rwctrl[763f0000] dma_mask[32-bit]
Mar 15 15:04:02 elettronicS kernel: [   12.565359] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmpr
Mar 15 15:04:02 elettronicS kernel: [   12.574534] ipw2200: Copyright(c) 2003-2006 Intel Corporation
Mar 15 15:04:02 elettronicS kernel: [   12.592888] ACPI: PCI Interrupt 0000:06:03.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Mar 15 15:04:02 elettronicS kernel: [   12.602067] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
Mar 15 15:04:02 elettronicS kernel: [   12.706632] ACPI: PCI interrupt for device 0000:06:03.0 disabled
Mar 15 15:04:02 elettronicS kernel: [   12.725057] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Mar 15 15:04:02 elettronicS kernel: [   12.734373] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Mar 15 15:04:02 elettronicS kernel: [   12.744045] ICH6: IDE controller (0x8086:0x266f rev 0x04) at  PCI slot 0000:00:1f.1
Mar 15 15:04:02 elettronicS kernel: [   12.753747] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
Mar 15 15:04:02 elettronicS kernel: [   12.763566] ICH6: not 100%% native mode: will probe irqs later
Mar 15 15:04:02 elettronicS kernel: [   12.773326]     ide0: BM-DMA at 0x18c0-0x18c7, BIOS settings: hda:DMA, hdb:DMA
Mar 15 15:04:02 elettronicS kernel: [   12.783209] ICH6: IDE port disabled
Mar 15 15:04:02 elettronicS kernel: [   12.822768] hda: UDMA/100 mode selected
Mar 15 15:04:02 elettronicS kernel: [   12.832718] hdb: UDMA/33 mode selected
Mar 15 15:04:02 elettronicS kernel: [   12.856421] hda: max request size: 128KiB
Mar 15 15:04:02 elettronicS kernel: [   12.865929] hda: 156301488 sectors (80026 MB), CHS=65535/16/63
Mar 15 15:04:02 elettronicS kernel: [   12.875551] hda: cache flushes supported
Mar 15 15:04:02 elettronicS kernel: [   12.885108]  hda: hda1 hda2 hda3
Mar 15 15:04:02 elettronicS kernel: [   12.895222] hdb: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
Mar 15 15:04:02 elettronicS kernel: [   12.904853] Uniform CD-ROM driver Revision: 3.20
Mar 15 15:04:02 elettronicS kernel: [   12.924491] Loading iSCSI transport class v2.0-724.
Mar 15 15:04:02 elettronicS kernel: [   12.934089] iscsi: registered transport (tcp)
Mar 15 15:04:02 elettronicS kernel: [   12.943394] st: Version 20070203, fixed bufsize 32768, s/g segs 256
Mar 15 15:04:02 elettronicS kernel: [   12.980376] SCSI Media Changer driver v0.25 
Mar 15 15:04:02 elettronicS kernel: [   12.998356] I2O subsystem v1.325
Mar 15 15:04:02 elettronicS kernel: [   13.006977] i2o: max drivers = 8
Mar 15 15:04:02 elettronicS kernel: [   13.015362] I2O Configuration OSM v1.323
Mar 15 15:04:02 elettronicS kernel: [   13.023548] I2O Bus Adapter OSM v1.317
Mar 15 15:04:02 elettronicS kernel: [   13.031600] I2O Block Device OSM v1.325
Mar 15 15:04:02 elettronicS kernel: [   13.039529] I2O SCSI Peripheral OSM v1.316
Mar 15 15:04:02 elettronicS kernel: [   13.047338] I2O ProcFS OSM v1.316
Mar 15 15:04:02 elettronicS kernel: [   13.055224] ACPI: PCI Interrupt 0000:06:01.2[A] -> Link [LNKG] -> GSI 10 (level, low) -> IRQ 10
Mar 15 15:04:02 elettronicS kernel: [   13.112946] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10]  MMIO=[b0217000-b02177ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
Mar 15 15:04:02 elettronicS kernel: [   13.129106] video1394: Installed video1394 module
Mar 15 15:04:02 elettronicS kernel: [   13.137162] ieee1394: raw1394: /dev/raw1394 device initialized
Mar 15 15:04:02 elettronicS kernel: [   13.153838] usbmon: debugfs is not available
Mar 15 15:04:02 elettronicS kernel: [   13.170868] ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
Mar 15 15:04:02 elettronicS kernel: [   13.179461] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Mar 15 15:04:02 elettronicS kernel: [   13.187935] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
Mar 15 15:04:02 elettronicS kernel: [   13.200244] ehci_hcd 0000:00:1d.7: debug port 1
Mar 15 15:04:02 elettronicS kernel: [   13.208432] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xb0000000
Mar 15 15:04:02 elettronicS kernel: [   13.220428] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Mar 15 15:04:02 elettronicS kernel: [   13.228630] usb usb1: configuration #1 chosen from 1 choice
Mar 15 15:04:02 elettronicS kernel: [   13.236654] hub 1-0:1.0: USB hub found
Mar 15 15:04:02 elettronicS kernel: [   13.244541] hub 1-0:1.0: 8 ports detected
Mar 15 15:04:02 elettronicS kernel: [   13.252504] 116x: driver isp116x-hcd, 03 Nov 2005
Mar 15 15:04:02 elettronicS kernel: [   13.260397] USB Universal Host Controller Interface driver v3.0
Mar 15 15:04:02 elettronicS kernel: [   13.268421] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
Mar 15 15:04:02 elettronicS kernel: [   13.276706] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Mar 15 15:04:02 elettronicS kernel: [   13.285003] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Mar 15 15:04:02 elettronicS kernel: [   13.293363] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
Mar 15 15:04:02 elettronicS kernel: [   13.301751] usb usb2: configuration #1 chosen from 1 choice
Mar 15 15:04:02 elettronicS kernel: [   13.310114] hub 2-0:1.0: USB hub found
Mar 15 15:04:02 elettronicS kernel: [   13.318332] hub 2-0:1.0: 2 ports detected
Mar 15 15:04:02 elettronicS kernel: [   13.326931] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Mar 15 15:04:02 elettronicS kernel: [   13.335353] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Mar 15 15:04:02 elettronicS kernel: [   13.343766] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
Mar 15 15:04:02 elettronicS kernel: [   13.352267] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
Mar 15 15:04:02 elettronicS kernel: [   13.360777] usb usb3: configuration #1 chosen from 1 choice
Mar 15 15:04:02 elettronicS kernel: [   13.369153] hub 3-0:1.0: USB hub found
Mar 15 15:04:02 elettronicS kernel: [   13.377566] hub 3-0:1.0: 2 ports detected
Mar 15 15:04:02 elettronicS kernel: [   13.386830] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
Mar 15 15:04:02 elettronicS kernel: [   13.395582] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Mar 15 15:04:02 elettronicS kernel: [   13.404276] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
Mar 15 15:04:02 elettronicS kernel: [   13.413012] uhci_hcd 0000:00:1d.2: irq 10, io base 0x00001840
Mar 15 15:04:02 elettronicS kernel: [   13.421839] usb usb4: configuration #1 chosen from 1 choice
Mar 15 15:04:02 elettronicS kernel: [   13.430661] hub 4-0:1.0: USB hub found
Mar 15 15:04:02 elettronicS kernel: [   13.439429] hub 4-0:1.0: 2 ports detected
Mar 15 15:04:02 elettronicS kernel: [   13.449230] ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
Mar 15 15:04:02 elettronicS kernel: [   13.458357] uhci_hcd 0000:00:1d.3: UHCI Host Controller
Mar 15 15:04:02 elettronicS kernel: [   13.467518] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
Mar 15 15:04:02 elettronicS kernel: [   13.476660] uhci_hcd 0000:00:1d.3: irq 10, io base 0x00001860
Mar 15 15:04:02 elettronicS kernel: [   13.485602] usb usb5: configuration #1 chosen from 1 choice
Mar 15 15:04:02 elettronicS kernel: [   13.494214] hub 5-0:1.0: USB hub found
Mar 15 15:04:02 elettronicS kernel: [   13.502718] hub 5-0:1.0: 2 ports detected
Mar 15 15:04:02 elettronicS kernel: [   13.512158] sl811: driver sl811-hcd, 19 May 2005
Mar 15 15:04:02 elettronicS kernel: [   13.520400] Initializing USB Mass Storage driver...
Mar 15 15:04:02 elettronicS kernel: [   13.529372] usb 3-2: new low speed USB device using uhci_hcd and address 2
Mar 15 15:04:02 elettronicS kernel: [   13.540986] usb 3-2: configuration #1 chosen from 1 choice
Mar 15 15:04:02 elettronicS kernel: [   13.551817] usb 5-2: new low speed USB device using uhci_hcd and address 2
Mar 15 15:04:02 elettronicS kernel: [   13.562161] usb 5-2: configuration #1 chosen from 1 choice
Mar 15 15:04:02 elettronicS kernel: [   13.570369] usbcore: registered new interface driver usb-storage
Mar 15 15:04:02 elettronicS kernel: [   13.578415] USB Mass Storage support registered.
Mar 15 15:04:02 elettronicS kernel: [   13.586555] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Mar 15 15:04:02 elettronicS kernel: [   13.596889] serio: i8042 KBD port at 0x60,0x64 irq 1
Mar 15 15:04:02 elettronicS kernel: [   13.605062] serio: i8042 AUX port at 0x60,0x64 irq 12
Mar 15 15:04:02 elettronicS kernel: [   13.613215] mice: PS/2 mouse device common for all mice
Mar 15 15:04:02 elettronicS kernel: [   13.621402] Bluetooth: HCI USB driver ver 2.9
Mar 15 15:04:02 elettronicS kernel: [   13.629574] usbcore: registered new interface driver hci_usb
Mar 15 15:04:02 elettronicS kernel: [   13.637794] wbsd: Winbond W83L51xD SD/MMC card interface driver
Mar 15 15:04:02 elettronicS kernel: [   13.645878] wbsd: Copyright(c) Pierre Ossman
Mar 15 15:04:02 elettronicS kernel: [   13.653862] usbcore: registered new interface driver hiddev
Mar 15 15:04:02 elettronicS kernel: [   13.662253] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
Mar 15 15:04:02 elettronicS kernel: [   13.671196] input:   USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input5
Mar 15 15:04:02 elettronicS kernel: [   13.679759] input,hidraw0: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:00:1d.1-2
Mar 15 15:04:02 elettronicS kernel: [   13.689525] input:   USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input6
Mar 15 15:04:02 elettronicS kernel: [   13.698471] input,hidraw1: USB HID v1.10 Device [  USB Keyboard] on usb-0000:00:1d.1-2
Mar 15 15:04:02 elettronicS kernel: [   13.707795] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/input/input7
Mar 15 15:04:02 elettronicS kernel: [   13.716899] input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.3-2
Mar 15 15:04:02 elettronicS kernel: [   13.725958] usbcore: registered new interface driver usbhid
Mar 15 15:04:02 elettronicS kernel: [   13.734979] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Mar 15 15:04:02 elettronicS kernel: [   13.744111] TCP cubic registered
Mar 15 15:04:02 elettronicS kernel: [   13.753096] Initializing XFRM netlink socket
Mar 15 15:04:02 elettronicS kernel: [   13.762187] NET: Registered protocol family 1
Mar 15 15:04:02 elettronicS kernel: [   13.771142] NET: Registered protocol family 17
Mar 15 15:04:02 elettronicS kernel: [   13.780059] IrCOMM protocol (Dag Brattli)
Mar 15 15:04:02 elettronicS kernel: [   13.790355] Bluetooth: L2CAP ver 2.9
Mar 15 15:04:02 elettronicS kernel: [   13.798936] Bluetooth: L2CAP socket layer initialized
Mar 15 15:04:02 elettronicS kernel: [   13.807494] Bluetooth: SCO (Voice Link) ver 0.5
Mar 15 15:04:02 elettronicS kernel: [   13.815989] Bluetooth: SCO socket layer initialized
Mar 15 15:04:02 elettronicS kernel: [   13.824539] Bluetooth: RFCOMM socket layer initialized
Mar 15 15:04:02 elettronicS kernel: [   13.832942] Bluetooth: RFCOMM TTY layer initialized
Mar 15 15:04:02 elettronicS kernel: [   13.841192] Bluetooth: RFCOMM ver 1.8
Mar 15 15:04:02 elettronicS kernel: [   13.849289] Bluetooth: BNEP (Ethernet Emulation) ver 1.2
Mar 15 15:04:02 elettronicS kernel: [   13.857418] Bluetooth: BNEP filters: protocol multicast
Mar 15 15:04:02 elettronicS kernel: [   13.865481] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Mar 15 15:04:02 elettronicS kernel: [   13.873600] RPC: Registered udp transport module.
Mar 15 15:04:02 elettronicS kernel: [   13.881708] RPC: Registered tcp transport module.
Mar 15 15:04:02 elettronicS kernel: [   13.889703] ieee80211: 802.11 data/management/control stack, git-1.1.13
Mar 15 15:04:02 elettronicS kernel: [   13.897828] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
Mar 15 15:04:02 elettronicS kernel: [   13.915207] BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
Mar 15 15:04:02 elettronicS kernel: [   30.153650] kjournald starting.  Commit interval 5 seconds
Mar 15 15:04:02 elettronicS kernel: [   30.163343] EXT3-fs: mounted filesystem with ordered data mode.
Mar 15 15:04:02 elettronicS kernel: [   30.182957] Freeing unused kernel memory: 236k freed
Mar 15 15:04:02 elettronicS kernel: [   15.258895] ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Mar 15 15:04:02 elettronicS kernel: [   15.528993] ACPI: PCI Interrupt 0000:00:1e.2[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
Mar 15 15:04:02 elettronicS kernel: [   15.615377] Linux agpgart interface v0.102
Mar 15 15:04:02 elettronicS kernel: [   15.766306] [fglrx] Maximum main memory to use for locked dma buffers: 924 MBytes.
Mar 15 15:04:02 elettronicS kernel: [   15.774462] [fglrx] ASYNCIO init succeed!
Mar 15 15:04:02 elettronicS kernel: [   15.783377] [fglrx] PAT is enabled successfully!
Mar 15 15:04:02 elettronicS kernel: [   15.791146] [fglrx] module loaded - fglrx 8.45.5 [Feb  1 2008] on minor 0
Mar 15 15:04:02 elettronicS kernel: [   15.813560] iTCO_vendor_support: vendor-support=0
Mar 15 15:04:02 elettronicS kernel: [   15.846300] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
Mar 15 15:04:02 elettronicS kernel: [   15.853761] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
Mar 15 15:04:02 elettronicS kernel: [   15.861174] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Mar 15 15:04:02 elettronicS kernel: [   15.868544] intel8x0_measure_ac97_clock: measured 62534 usecs
Mar 15 15:04:02 elettronicS kernel: [   15.875939] intel8x0: clocking to 48000
Mar 15 15:04:02 elettronicS kernel: [   15.883508] Yenta: CardBus bridge found at 0000:06:01.0 [1025:0066]
Mar 15 15:04:02 elettronicS kernel: [   15.891133] Yenta: Enabling burst memory read transactions
Mar 15 15:04:02 elettronicS kernel: [   15.898771] Yenta: Using CSCINT to route CSC interrupts to PCI
Mar 15 15:04:02 elettronicS kernel: [   15.906462] Yenta: Routing CardBus interrupts to PCI
Mar 15 15:04:02 elettronicS kernel: [   15.914199] Yenta TI: socket 0000:06:01.0, mfunc 0x01c21b22, devctl 0x64
Mar 15 15:04:02 elettronicS kernel: [   16.153748] Yenta: ISA IRQ mask 0x00f8, PCI irq 10
Mar 15 15:04:02 elettronicS kernel: [   16.161690] Socket status: 30000006
Mar 15 15:04:02 elettronicS kernel: [   16.169546] Yenta: Raising subordinate bus# of parent bus (#06) from #07 to #08
Mar 15 15:04:02 elettronicS kernel: [   16.177671] pcmcia: parent PCI bridge Memory window: 0xb0200000 - 0xb02fffff
Mar 15 15:04:02 elettronicS kernel: [   16.203887] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input8
Mar 15 15:04:02 elettronicS kernel: [   16.237226] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
Mar 15 15:04:02 elettronicS kernel: [   17.750072] cs: IO port probe 0xc00-0xcff: clean.
Mar 15 15:04:02 elettronicS kernel: [   17.759278] cs: IO port probe 0x820-0x8ff: clean.
Mar 15 15:04:02 elettronicS kernel: [   17.768264] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
Mar 15 15:04:02 elettronicS kernel: [   38.497836] cs: IO port probe 0x100-0x3af: clean.
Mar 15 15:04:02 elettronicS kernel: [   38.509387] cs: IO port probe 0xa00-0xaff: clean.
Mar 15 15:04:02 elettronicS kernel: [   38.526391] Adding 1020116k swap on /dev/hda2.  Priority:-1 extents:1 across:1020116k
Mar 15 15:04:02 elettronicS kernel: [   38.645419] EXT3 FS on hda1, internal journal
Mar 15 15:04:02 elettronicS kernel: [   38.814374] input: PC Speaker as /devices/platform/pcspkr/input/input9
Mar 15 15:04:02 elettronicS kernel: [   38.925725] input: PS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
Mar 15 15:04:02 elettronicS kernel: [   18.093060] lp: driver loaded but no devices found
Mar 15 15:04:02 elettronicS kernel: [   39.427556] NTFS volume version 3.1.
Mar 15 15:04:05 elettronicS logger: /etc/rc.d/rc.inet1:  /sbin/ifconfig eth0 192.168.0.3 broadcast 192.168.0.255 netmask 255.255.255.0
Mar 15 15:04:05 elettronicS logger: /etc/rc.d/rc.inet1:  /sbin/route add default gw 192.168.0.1 metric 1
Mar 15 15:04:05 elettronicS logger: /etc/rc.d/rc.inet1:  /sbin/ifconfig lo 127.0.0.1
Mar 15 15:04:05 elettronicS logger: /etc/rc.d/rc.inet1:  /sbin/route add -net 127.0.0.0 netmask 255.0.0.0 lo
Mar 15 15:04:07 elettronicS kernel: [   46.213648] tg3: eth0: Link is up at 100 Mbps, full duplex.
Mar 15 15:04:07 elettronicS kernel: [   46.213656] tg3: eth0: Flow control is on for TX and on for RX.
Mar 15 15:04:16 elettronicS /usr/sbin/gpm[3118]: *** info [startup.c(95)]: 
Mar 15 15:04:16 elettronicS /usr/sbin/gpm[3118]: Started gpm successfully. Entered daemon mode.
Mar 15 15:04:16 elettronicS /usr/sbin/gpm[3118]: *** info [mice.c(1766)]: 
Mar 15 15:04:16 elettronicS /usr/sbin/gpm[3118]: imps2: Auto-detected intellimouse PS/2
Mar 15 15:04:39 elettronicS kernel: [   52.529109] NET: Registered protocol family 10
Mar 15 15:04:39 elettronicS kernel: [   52.529481] lo: Disabled Privacy Extensions
Mar 15 15:04:40 elettronicS kernel: [   52.885849] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
Mar 15 15:04:41 elettronicS kernel: [   55.885078] [fglrx] Reserve Block - 0 offset =  0X7ffb000 length = 0X5000
Mar 15 15:04:41 elettronicS kernel: [   55.885088] [fglrx] Reserve Block - 1 offset =  0X0 length = 0X40000
Mar 15 15:04:41 elettronicS kernel: [   55.885094] [fglrx] Reserve Block - 2 offset =  0Xffff000 length = 0X1000
Mar 15 15:04:41 elettronicS kernel: [   55.885100] [fglrx] Reserve Block - 3 offset =  0X7fbb000 length = 0X40000
Mar 15 15:04:42 elettronicS kernel: [   25.893937] [fglrx] interrupt source 20008000 successfully enabled
Mar 15 15:04:42 elettronicS kernel: [   25.893943] [fglrx] enable ID = 0x00000004
Mar 15 15:04:42 elettronicS kernel: [   25.893952] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000
Mar 15 15:04:42 elettronicS kernel: [   25.894141] [fglrx] interrupt source 10000000 successfully enabled
Mar 15 15:04:42 elettronicS kernel: [   25.894144] [fglrx] enable ID = 0x00000005
Mar 15 15:04:42 elettronicS kernel: [   25.894148] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000
Mar 15 15:05:07 elettronicS gconfd (nicola-3287): starting (version 2.18.0.1), pid 3287 user 'nicola'
Mar 15 15:05:07 elettronicS gconfd (nicola-3287): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
Mar 15 15:05:07 elettronicS gconfd (nicola-3287): Resolved address "xml:readwrite:/home/nicola/.gconf" to a writable configuration source at position 1
Mar 15 15:05:07 elettronicS gconfd (nicola-3287): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2

Re: problema Boot con kernel 2.6.24.3

Inviato: sab 15 mar 2008, 16:17
da paZ_
/var/log/dmesg

Codice: Seleziona tutto

[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003fe80000 (usable)
[    0.000000]  BIOS-e820: 000000003fe80000 - 000000003fe89000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003fe89000 - 000000003ff00000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
[    0.000000]  BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[    0.000000]  BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] 126MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] Entering add_active_range(0, 0, 261760) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   261760
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   261760
[    0.000000] On node 0 totalpages: 261760
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 253 pages used for memmap
[    0.000000]   HighMem zone: 32131 pages, LIFO batch:7
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP 000F6970, 0014 (r0 PTLTD )
[    0.000000] ACPI: RSDT 3FE80F79, 0044 (r1 PTLTD    RSDT    6040000  LTP        0)
[    0.000000] ACPI: FACP 3FE88E8A, 0074 (r1 INTEL  ALVISO    6040000 LOHR       5F)
[    0.000000] ACPI: DSDT 3FE817F3, 7697 (r1 INTEL  ALVISO    6040000 MSFT  100000E)
[    0.000000] ACPI: FACS 3FE99FC0, 0040
[    0.000000] ACPI: APIC 3FE88EFE, 0066 (r1 INTEL  ALVISO    6040000 LOHR       5F)
[    0.000000] ACPI: HPET 3FE88F64, 0038 (r1 INTEL  ALVISO    6040000 LOHR       5F)
[    0.000000] ACPI: MCFG 3FE88F9C, 003C (r1 INTEL  ALVISO    6040000 LOHR       5F)
[    0.000000] ACPI: BOOT 3FE88FD8, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
[    0.000000] ACPI: SSDT 3FE813AE, 0235 (r1  PmRef  Cpu0Ist     3000 INTL 20030224)
[    0.000000] ACPI: SSDT 3FE811D6, 01D8 (r1  PmRef  Cpu0Cst     3001 INTL 20030224)
[    0.000000] ACPI: SSDT 3FE80FBD, 0219 (r1  PmRef    CpuPm     3000 INTL 20030224)
[    0.000000] ACPI: DMI detected: Acer
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0x0 is invalid
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259715
[    0.000000] Kernel command line: auto BOOT_IMAGE=Rebuild ro root=301
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 1729.047 MHz processor.
[   11.180631] Console: colour dummy device 80x25
[   11.180635] console [tty0] enabled
[   11.181084] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   11.181566] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   11.206924] Memory: 1030380k/1047040k available (4979k kernel code, 16032k reserved, 1501k data, 236k init, 129536k highmem)
[   11.206939] virtual kernel memory layout:
[   11.206940]     fixmap  : 0xfffe9000 - 0xfffff000   (  88 kB)
[   11.206941]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   11.206942]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   11.206943]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   11.206945]       .init : 0xc0758000 - 0xc0793000   ( 236 kB)
[   11.206946]       .data : 0xc05dcc5c - 0xc075439c   (1501 kB)
[   11.206947]       .text : 0xc0100000 - 0xc05dcc5c   (4979 kB)
[   11.206971] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   11.287043] Calibrating delay using timer specific routine.. 3460.60 BogoMIPS (lpj=6921204)
[   11.287080] Security Framework initialized
[   11.287092] Capability LSM initialized
[   11.287105] Mount-cache hash table entries: 512
[   11.287203] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 00000000
[   11.287213] CPU: L1 I cache: 32K, L1 D cache: 32K
[   11.287219] CPU: L2 cache: 2048K
[   11.287223] CPU: After all inits, caps: afe9fbff 00100000 00000000 00002040 00000180 00000000 00000000 00000000
[   11.287228] Intel machine check architecture supported.
[   11.287235] Intel machine check reporting enabled on CPU#0.
[   11.287241] Compat vDSO mapped to ffffe000.
[   11.287252] CPU: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
[   11.287259] Checking 'hlt' instruction... OK.
[   11.303498] Freeing SMP alternatives: 0k freed
[   11.303503] ACPI: Core revision 20070126
[   11.305980] ACPI: setting ELCR to 0200 (from 0c00)
[   11.307886] net_namespace: 64 bytes
[   11.308274] NET: Registered protocol family 16
[   11.308421] ACPI: bus type pci registered
[   11.308433] PCI: Using MMCONFIG
[   11.308817] Setting up standard PCI resources
[   11.314544] ACPI: EC: Look up EC in DSDT
[   11.875055] ACPI: Interpreter enabled
[   11.875062] ACPI: (supports S0 S3 S4 S5)
[   11.875076] ACPI: Using PIC for interrupt routing
[   11.875391] ACPI: EC: non-query interrupt received, switching to interrupt mode
[   11.899752] ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
[   11.899758] ACPI: EC: driver started in interrupt mode
[   11.899792] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   11.900205] Force enabled HPET at base address 0xfed00000
[   11.900210] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[   11.900217] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[   11.900783] PCI: Transparent bridge - 0000:00:1e.0
[   11.900841] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   11.901227] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[   11.901375] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[   11.901519] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[   11.901676] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[   11.906097] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[   11.906194] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[   11.906292] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[   11.906387] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[   11.906481] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[   11.906576] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[   11.906672] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[   11.906768] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[   11.906894] Linux Plug and Play Support v0.97 (c) Adam Belay
[   11.906921] pnp: PnP ACPI init
[   11.906930] ACPI: bus type pnp registered
[   11.909275] pnp: PnP ACPI: found 9 devices
[   11.909280] ACPI: ACPI bus type pnp unregistered
[   11.909437] SCSI subsystem initialized
[   11.909458] libata version 3.00 loaded.
[   11.909551] usbcore: registered new interface driver usbfs
[   11.909600] usbcore: registered new interface driver hub
[   11.909634] usbcore: registered new device driver usb
[   11.909830] PCI: Using ACPI for IRQ routing
[   11.909835] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   11.909844] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
[   11.909849] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
[   11.909854] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0
[   11.909859] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1
[   11.909864] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1
[   11.909870] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1
[   11.909875] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2
[   11.909880] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2
[   11.909885] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.2
[   11.910876] NET: Registered protocol family 23
[   11.910903] Bluetooth: Core ver 2.11
[   11.910986] NET: Registered protocol family 31
[   11.910990] Bluetooth: HCI device and connection manager initialized
[   11.910996] Bluetooth: HCI socket layer initialized
[   11.911132] hpet clockevent registered
[   11.911157] ACPI: RTC can wake from S4
[   11.915134] Time: tsc clocksource has been installed.
[   11.923160] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[   11.923168] system 00:01: iomem range 0xf0000000-0xf0003fff could not be reserved
[   11.923175] system 00:01: iomem range 0xf0004000-0xf0004fff could not be reserved
[   11.923182] system 00:01: iomem range 0xf0005000-0xf0005fff could not be reserved
[   11.923189] system 00:01: iomem range 0xf0008000-0xf000bfff could not be reserved
[   11.923196] system 00:01: iomem range 0xfed20000-0xfed8ffff could not be reserved
[   11.923206] system 00:04: ioport range 0x680-0x6ff has been reserved
[   11.923211] system 00:04: ioport range 0x800-0x80f has been reserved
[   11.923217] system 00:04: ioport range 0x1000-0x107f has been reserved
[   11.923222] system 00:04: ioport range 0x1180-0x11bf has been reserved
[   11.923228] system 00:04: ioport range 0x1600-0x167f has been reserved
[   11.953577] PCI: Bridge: 0000:00:01.0
[   11.953582]   IO window: 3000-3fff
[   11.953586]   MEM window: b0100000-b01fffff
[   11.953591]   PREFETCH window: c0000000-cfffffff
[   11.953595] PCI: Bridge: 0000:00:1c.0
[   11.953598]   IO window: disabled.
[   11.953603]   MEM window: disabled.
[   11.953607]   PREFETCH window: disabled.
[   11.953613] PCI: Bridge: 0000:00:1c.1
[   11.953616]   IO window: disabled.
[   11.953621]   MEM window: disabled.
[   11.953625]   PREFETCH window: disabled.
[   11.953630] PCI: Bridge: 0000:00:1c.2
[   11.953633]   IO window: disabled.
[   11.953638]   MEM window: disabled.
[   11.953642]   PREFETCH window: disabled.
[   11.953651] PCI: Bus 7, cardbus bridge: 0000:06:01.0
[   11.953655]   IO window: 00001400-000014ff
[   11.953661]   IO window: 00002800-000028ff
[   11.953667]   PREFETCH window: 50000000-53ffffff
[   11.953672]   MEM window: 54000000-57ffffff
[   11.953678] PCI: Bridge: 0000:00:1e.0
[   11.953681]   IO window: disabled.
[   11.953686]   MEM window: b0200000-b02fffff
[   11.953691]   PREFETCH window: disabled.
[   11.953845] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[   11.953851] PCI: setting IRQ 10 as level-triggered
[   11.953854] ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
[   11.953864] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   11.954006] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[   11.954011] PCI: setting IRQ 11 as level-triggered
[   11.954014] ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[   11.954025] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   11.954037] ACPI: PCI Interrupt 0000:00:1c.1[B] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
[   11.954047] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   11.954186] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[   11.954192] ACPI: PCI Interrupt 0000:00:1c.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[   11.954202] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[   11.954209] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   11.954347] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
[   11.954352] ACPI: PCI Interrupt 0000:06:01.0[A] -> Link [LNKG] -> GSI 10 (level, low) -> IRQ 10
[   11.954377] NET: Registered protocol family 2
[   11.991153] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   11.991383] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[   11.992223] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[   11.992496] TCP: Hash tables configured (established 131072 bind 65536)
[   11.992502] TCP reno registered
[   12.003328] Simple Boot Flag at 0x36 set to 0x1
[   12.003688] highmem bounce pool size: 64 pages
[   12.003742] VFS: Disk quotas dquot_6.5.1
[   12.003767] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   12.003914] NTFS driver 2.1.29 [Flags: R/W].
[   12.003963] JFS: nTxBlock = 8051, nTxLock = 64413
[   12.009998] SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
[   12.010227] SGI XFS Quota Management subsystem
[   12.010237] OCFS2 1.3.3
[   12.010272] OCFS2 Node Manager 1.3.3
[   12.010475] OCFS2 DLM 1.3.3
[   12.010499] OCFS2 DLMFS 1.3.3
[   12.010522] OCFS2 User DLM kernel interface loaded
[   12.010620] io scheduler noop registered
[   12.010625] io scheduler anticipatory registered
[   12.010629] io scheduler deadline registered
[   12.010651] io scheduler cfq registered (default)
[   12.010831] Boot video device is 0000:01:00.0
[   12.010935] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   12.010951] assign_interrupt_mode Found MSI capability
[   12.010958] Allocate Port Service[0000:00:01.0:pcie00]
[   12.010992] Allocate Port Service[0000:00:01.0:pcie03]
[   12.011038] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   12.011065] assign_interrupt_mode Found MSI capability
[   12.011070] Allocate Port Service[0000:00:1c.0:pcie00]
[   12.011116] Allocate Port Service[0000:00:1c.0:pcie02]
[   12.011144] Allocate Port Service[0000:00:1c.0:pcie03]
[   12.011199] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   12.011225] assign_interrupt_mode Found MSI capability
[   12.011231] Allocate Port Service[0000:00:1c.1:pcie00]
[   12.011258] Allocate Port Service[0000:00:1c.1:pcie02]
[   12.011283] Allocate Port Service[0000:00:1c.1:pcie03]
[   12.011339] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[   12.011365] assign_interrupt_mode Found MSI capability
[   12.011370] Allocate Port Service[0000:00:1c.2:pcie00]
[   12.011396] Allocate Port Service[0000:00:1c.2:pcie02]
[   12.011422] Allocate Port Service[0000:00:1c.2:pcie03]
[   12.011601] vesafb: framebuffer at 0xc0000000, mapped to 0xf8d00000, using 3072k, total 16384k
[   12.011609] vesafb: mode is 1024x768x16, linelength=2048, pages=9
[   12.011614] vesafb: protected mode interface info at c000:ae68
[   12.011619] vesafb: pmi: set display start = c00caef6, set palette = c00caf36
[   12.011624] vesafb: scrolling: redraw
[   12.011628] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[   12.033244] Console: switching to colour frame buffer device 128x48
[   12.052881] fb0: VESA VGA frame buffer device
[   12.054638] ACPI: AC Adapter [ACAD] (on-line)
[   12.054917] ACPI: Battery Slot [BAT1] (battery absent)
[   12.055178] ACPI: Battery Slot [BAT2] (battery absent)
[   12.055488] input: Power Button (FF) as /devices/virtual/input/input0
[   12.055752] ACPI: Power Button (FF) [PWRF]
[   12.055979] input: Lid Switch as /devices/virtual/input/input1
[   12.056273] ACPI: Lid Switch [LID]
[   12.056464] input: Power Button (CM) as /devices/virtual/input/input2
[   12.056728] ACPI: Power Button (CM) [PWRB]
[   12.056947] input: Sleep Button (CM) as /devices/virtual/input/input3
[   12.057210] ACPI: Sleep Button (CM) [SLPB]
[   12.057664] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
[   12.057961] ACPI: Processor [CPU0] (supports 8 throttling states)
[   12.061377] ACPI: Thermal Zone [THRM] (35 C)
[   12.061562] isapnp: Scanning for PnP cards...
[   12.371425] isapnp: No Plug & Play device found
[   12.394935] Marking TSC unstable due to: possible TSC halt in C2.
[   12.401791] Time: hpet clocksource has been installed.
[   12.408590] Switched to high resolution mode on CPU 0
[   12.430013] Real Time Clock Driver v1.12ac
[   12.436704] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   12.444331] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
[   12.451829] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
[   12.458899] ACPI: PCI Interrupt 0000:00:1e.3[B] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
[   12.466239] ACPI: PCI interrupt for device 0000:00:1e.3 disabled
[   12.474102] RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
[   12.481894] loop: module loaded
[   12.489478] tg3.c:v3.86 (November 9, 2007)
[   12.497055] ACPI: PCI Interrupt 0000:06:08.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
[   12.531166] eth0: Tigon3 [partno(BCM95705A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:16:36:3e:e5:76
[   12.547756] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
[   12.556485] eth0: dma_rwctrl[763f0000] dma_mask[32-bit]
[   12.565359] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmpr
[   12.574534] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[   12.583855] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[   12.592888] ACPI: PCI Interrupt 0000:06:03.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[   12.602067] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[   12.611420] Clocksource tsc unstable (delta = -297278110 ns)
[   12.679037] ipw2200: ipw2200-bss.fw request_firmware failed: Reason -2
[   12.688273] ipw2200: Unable to load firmware: -2
[   12.697474] ipw2200: failed to register network device
[   12.706632] ACPI: PCI interrupt for device 0000:06:03.0 disabled
[   12.715793] ipw2200: probe of 0000:06:03.0 failed with error -5
[   12.725057] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   12.734373] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   12.744045] ICH6: IDE controller (0x8086:0x266f rev 0x04) at  PCI slot 0000:00:1f.1
[   12.753747] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[   12.763566] ICH6: not 100% native mode: will probe irqs later
[   12.773326]     ide0: BM-DMA at 0x18c0-0x18c7, BIOS settings: hda:DMA, hdb:DMA
[   12.783209] ICH6: IDE port disabled
[   12.792945] Probing IDE interface ide0...
[   12.802667] hdb: MATSHITADVD-RAM UJ-845S, ATAPI CD/DVD-ROM drive
[   12.812953] hda: TOSHIBA MK8025GAS, ATA DISK drive
[   12.822723] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[   12.822768] hda: UDMA/100 mode selected
[   12.832442] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[   12.832718] hdb: UDMA/33 mode selected
[   12.842537] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[   12.853020] Probing IDE interface ide1...
[   12.856421] hda: max request size: 128KiB
[   12.865929] hda: 156301488 sectors (80026 MB), CHS=65535/16/63
[   12.875551] hda: cache flushes supported
[   12.885108]  hda: hda1 hda2 hda3
[   12.895222] hdb: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
[   12.904853] Uniform CD-ROM driver Revision: 3.20
[   12.914924] ide-floppy driver 0.99.newide
[   12.924491] Loading iSCSI transport class v2.0-724.
[   12.934089] iscsi: registered transport (tcp)
[   12.943394] st: Version 20070203, fixed bufsize 32768, s/g segs 256
[   12.952788] Driver 'st' needs updating - please use bus_type methods
[   12.962223] Driver 'sd' needs updating - please use bus_type methods
[   12.971390] Driver 'sr' needs updating - please use bus_type methods
[   12.980376] SCSI Media Changer driver v0.25
[   12.989333] Driver 'ch' needs updating - please use bus_type methods
[   12.998356] I2O subsystem v1.325
[   13.006977] i2o: max drivers = 8
[   13.015362] I2O Configuration OSM v1.323
[   13.023548] I2O Bus Adapter OSM v1.317
[   13.031600] I2O Block Device OSM v1.325
[   13.039529] I2O SCSI Peripheral OSM v1.316
[   13.047338] I2O ProcFS OSM v1.316
[   13.055224] ACPI: PCI Interrupt 0000:06:01.2[A] -> Link [LNKG] -> GSI 10 (level, low) -> IRQ 10
[   13.112946] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10]  MMIO=[b0217000-b02177ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[   13.129106] video1394: Installed video1394 module
[   13.137162] ieee1394: raw1394: /dev/raw1394 device initialized
[   13.145288] NOTE: The dv1394 driver is unsupported and may be removed in a future Linux release. Use raw1394 instead.
[   13.153838] usbmon: debugfs is not available
[   13.162426] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[   13.170868] ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
[   13.179457] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   13.179461] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   13.187935] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[   13.200244] ehci_hcd 0000:00:1d.7: debug port 1
[   13.208426] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[   13.208432] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xb0000000
[   13.220428] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   13.228630] usb usb1: configuration #1 chosen from 1 choice
[   13.236654] hub 1-0:1.0: USB hub found
[   13.244541] hub 1-0:1.0: 8 ports detected
[   13.252504] 116x: driver isp116x-hcd, 03 Nov 2005
[   13.260364] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   13.260397] USB Universal Host Controller Interface driver v3.0
[   13.268421] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
[   13.276703] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   13.276706] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   13.285003] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[   13.293363] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
[   13.301751] usb usb2: configuration #1 chosen from 1 choice
[   13.310114] hub 2-0:1.0: USB hub found
[   13.318332] hub 2-0:1.0: 2 ports detected
[   13.326931] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[   13.335350] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   13.335353] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   13.343766] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[   13.352267] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
[   13.360777] usb usb3: configuration #1 chosen from 1 choice
[   13.369153] hub 3-0:1.0: USB hub found
[   13.377566] hub 3-0:1.0: 2 ports detected
[   13.386830] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[   13.395579] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   13.395582] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   13.404276] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[   13.413012] uhci_hcd 0000:00:1d.2: irq 10, io base 0x00001840
[   13.421839] usb usb4: configuration #1 chosen from 1 choice
[   13.430661] hub 4-0:1.0: USB hub found
[   13.439429] hub 4-0:1.0: 2 ports detected
[   13.449230] ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
[   13.458354] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[   13.458357] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   13.467518] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[   13.476660] uhci_hcd 0000:00:1d.3: irq 10, io base 0x00001860
[   13.485602] usb usb5: configuration #1 chosen from 1 choice
[   13.494214] hub 5-0:1.0: USB hub found
[   13.502718] hub 5-0:1.0: 2 ports detected
[   13.512158] sl811: driver sl811-hcd, 19 May 2005
[   13.520400] Initializing USB Mass Storage driver...
[   13.529372] usb 3-2: new low speed USB device using uhci_hcd and address 2
[   13.540986] usb 3-2: configuration #1 chosen from 1 choice
[   13.549393] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00c09f000075d696]
[   13.551817] usb 5-2: new low speed USB device using uhci_hcd and address 2
[   13.562161] usb 5-2: configuration #1 chosen from 1 choice
[   13.570369] usbcore: registered new interface driver usb-storage
[   13.578415] USB Mass Storage support registered.
[   13.586555] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   13.596889] serio: i8042 KBD port at 0x60,0x64 irq 1
[   13.605062] serio: i8042 AUX port at 0x60,0x64 irq 12
[   13.613215] mice: PS/2 mouse device common for all mice
[   13.621402] Bluetooth: HCI USB driver ver 2.9
[   13.629574] usbcore: registered new interface driver hci_usb
[   13.637794] wbsd: Winbond W83L51xD SD/MMC card interface driver
[   13.645878] wbsd: Copyright(c) Pierre Ossman
[   13.653862] usbcore: registered new interface driver hiddev
[   13.662253] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[   13.671196] input:   USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input5
[   13.679759] input,hidraw0: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:00:1d.1-2
[   13.689525] input:   USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input6
[   13.698471] input,hidraw1: USB HID v1.10 Device [  USB Keyboard] on usb-0000:00:1d.1-2
[   13.707795] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/input/input7
[   13.716899] input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.3-2
[   13.725958] usbcore: registered new interface driver usbhid
[   13.734979] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   13.744111] TCP cubic registered
[   13.753096] Initializing XFRM netlink socket
[   13.762187] NET: Registered protocol family 1
[   13.771142] NET: Registered protocol family 17
[   13.780059] IrCOMM protocol (Dag Brattli)
[   13.790355] Bluetooth: L2CAP ver 2.9
[   13.798936] Bluetooth: L2CAP socket layer initialized
[   13.807494] Bluetooth: SCO (Voice Link) ver 0.5
[   13.815989] Bluetooth: SCO socket layer initialized
[   13.824539] Bluetooth: RFCOMM socket layer initialized
[   13.832942] Bluetooth: RFCOMM TTY layer initialized
[   13.841192] Bluetooth: RFCOMM ver 1.8
[   13.849289] Bluetooth: BNEP (Ethernet Emulation) ver 1.2
[   13.857418] Bluetooth: BNEP filters: protocol multicast
[   13.865481] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[   13.873600] RPC: Registered udp transport module.
[   13.881708] RPC: Registered tcp transport module.
[   13.889703] ieee80211: 802.11 data/management/control stack, git-1.1.13
[   13.897828] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[   13.906078] ieee80211_crypt: registered algorithm 'NULL'
[   13.906287] Using IPI Shortcut mode
[   13.915207] BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
[   30.153650] kjournald starting.  Commit interval 5 seconds
[   30.163343] EXT3-fs: mounted filesystem with ordered data mode.
[   30.173064] VFS: Mounted root (ext3 filesystem) readonly.
[   30.182957] Freeing unused kernel memory: 236k freed
[   15.258895] ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[   15.528993] ACPI: PCI Interrupt 0000:00:1e.2[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[   15.537173] PCI: Setting latency timer of device 0000:00:1e.2 to 64
[   15.604851] intel_rng: FWH not detected
[   15.615377] Linux agpgart interface v0.102
[   15.737635] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   15.766306] [fglrx] Maximum main memory to use for locked dma buffers: 924 MBytes.
[   15.774462] [fglrx] ASYNCIO init succeed!
[   15.783377] [fglrx] PAT is enabled successfully!
[   15.791146] [fglrx] module loaded - fglrx 8.45.5 [Feb  1 2008] on minor 0
[   15.813560] iTCO_vendor_support: vendor-support=0
[   15.846300] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[   15.853761] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
[   15.861174] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   15.868544] intel8x0_measure_ac97_clock: measured 62534 usecs
[   15.875939] intel8x0: clocking to 48000
[   15.883508] Yenta: CardBus bridge found at 0000:06:01.0 [1025:0066]
[   15.891133] Yenta: Enabling burst memory read transactions
[   15.898771] Yenta: Using CSCINT to route CSC interrupts to PCI
[   15.906462] Yenta: Routing CardBus interrupts to PCI
[   15.914199] Yenta TI: socket 0000:06:01.0, mfunc 0x01c21b22, devctl 0x64
[   16.153748] Yenta: ISA IRQ mask 0x00f8, PCI irq 10
[   16.161690] Socket status: 30000006
[   16.169546] Yenta: Raising subordinate bus# of parent bus (#06) from #07 to #08
[   16.177671] pcmcia: parent PCI bridge Memory window: 0xb0200000 - 0xb02fffff
[   16.203887] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input8
[   16.237226] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   17.750072] cs: IO port probe 0xc00-0xcff: clean.
[   17.759278] cs: IO port probe 0x820-0x8ff: clean.
[   17.768264] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[   38.497836] cs: IO port probe 0x100-0x3af: clean.
[   38.509387] cs: IO port probe 0xa00-0xaff: clean.
[   38.526391] Adding 1020116k swap on /dev/hda2.  Priority:-1 extents:1 across:1020116k
[   38.645419] EXT3 FS on hda1, internal journal
[   38.814374] input: PC Speaker as /devices/platform/pcspkr/input/input9
[   38.925725] input: PS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
[   18.093060] lp: driver loaded but no devices found
[   39.427556] NTFS volume version 3.1.
grazie dell'attenzione.. :)

Re: problema Boot con kernel 2.6.24.3

Inviato: sab 15 mar 2008, 17:20
da ragnetto
Quindi tu adesso hai due kernel? L'originale e il nuovo che non funzia. Giusto? Posta i file di configurazione di entrambi i kernel. Li trovi dentro la directory "/usr/src/nomekernel" e si chiama .config è un file nascosto.

Re: problema Boot con kernel 2.6.24.3

Inviato: sab 15 mar 2008, 17:35
da manolo
Per caso il messaggio è questo?

Codice: Seleziona tutto

Clocksource tsc unstable (delta = -169175182 ns)
In caso affermativo non è un problema!
http://lkml.org/lkml/2007/7/9/196

Re: problema Boot con kernel 2.6.24.3

Inviato: sab 15 mar 2008, 18:34
da paZ_
@ragnetto

essendoci il limite dei caratteri ti posto il contenuto qui..
vecchio kernel:
http://www.filetor.org/get.php?id=89&name=.config
nuovo kernel:
http://www.filetor.org/get.php?id=90&name=.config

@manolo

si il messaggio e' proprio quello.. pero' e' strano che mi freezzi il caricamento del kernel per 30 sec.. non dovrebbe in teoria.. anche perche' la gestione della cpufreq su kubuntu ce l'avevo e caricava il kernel tranquillamente senza blocchi..

credo che l'errore si trovi tra queste righe del /var/log/messages

Codice: Seleziona tutto

Mar 15 18:10:23 elettronicS kernel: [   10.493130] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmpr
Mar 15 18:10:23 elettronicS kernel: [   10.502301] ipw2200: Copyright(c) 2003-2006 Intel Corporation
Mar 15 18:10:23 elettronicS kernel: [   10.520656] ACPI: PCI Interrupt 0000:06:03.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Mar 15 18:10:23 elettronicS kernel: [   10.529839] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
Mar 15 18:10:23 elettronicS kernel: [   10.634413] ACPI: PCI interrupt for device 0000:06:03.0 disabled
Mar 15 18:10:23 elettronicS kernel: [   10.652836] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Mar 15 18:10:23 elettronicS kernel: [   10.662156] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Mar 15 18:10:23 elettronicS kernel: [   10.671830] ICH6: IDE controller (0x8086:0x266f rev 0x04) at  PCI slot 0000:00:1f.1
Mar 15 18:10:23 elettronicS kernel: [   10.681529] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
Mar 15 18:10:23 elettronicS kernel: [   10.691345] ICH6: not 100%% native mode: will probe irqs later
Mar 15 18:10:23 elettronicS kernel: [   10.701103]     ide0: BM-DMA at 0x18c0-0x18c7, BIOS settings: hda:DMA, hdb:DMA
pero' e' strano che non compaia l'errore clocksource tsc unstable etc..
in quale log lo trovo quell'errore? anche perche' subito dopo compaiono altri mess che purtroppo non riesco a leggere..

Re: problema Boot con kernel 2.6.24.3

Inviato: sab 15 mar 2008, 18:37
da JohnnyMnemonic
Non è che questi 30 secondi sono il tempo di attesa di dhcp per la scheda di rete?

Re: problema Boot con kernel 2.6.24.3

Inviato: sab 15 mar 2008, 18:44
da manolo
paZ_ ha scritto:pero' e' strano che non compaia l'errore clocksource tsc unstable etc..
in quale log lo trovo quell'errore? anche perche' subito dopo compaiono altri mess che purtroppo non riesco a leggere..
dmesg

Re: problema Boot con kernel 2.6.24.3

Inviato: sab 15 mar 2008, 19:48
da paZ_
@JohnnyMmnemonic
non credo anche perche' sono dietro router e si connette subito..

spulciando su dmesg dovrei aver trovato l'errore..

Codice: Seleziona tutto

[   12.679037] ipw2200: ipw2200-bss.fw request_firmware failed: Reason -2
[   12.688273] ipw2200: Unable to load firmware: -2
[   12.697474] ipw2200: failed to register network device
[   12.706632] ACPI: PCI interrupt for device 0000:06:03.0 disabled
[   12.715793] ipw2200: probe of 0000:06:03.0 failed with error -5
ora ho letto che devo installare il subsystem ieee80211 e ipw2200
stavo provando ad installare ieee80211 ma ho degli errori, ho scompattato il file ieee80211 ed una volta nella directory ho dato il comando make.. come domande mi ha chiesto se volevo eliminare tutte le precedenti versioni di ieee80211 e ho dato yes 2 volte.. pero' alla fine non finisce di compilare e mi da questo errore..

Codice: Seleziona tutto

# make
Checking in /lib/modules/2.6.24.3-usu for ieee80211 components...
make -C /lib/modules/2.6.24.3-usu/build M=/home/nicola/Desktop/driver/ieee80211-1.2.18 modules
make[1]: Entering directory `/usr/src/linux-2.6.24.3'
  CC [M]  /home/nicola/Desktop/driver/ieee80211-1.2.18/ieee80211_module.o
/home/nicola/Desktop/driver/ieee80211-1.2.18/ieee80211_module.c: In function 'ieee80211_init':
/home/nicola/Desktop/driver/ieee80211-1.2.18/ieee80211_module.c:268: error: 'proc_net' undeclared (first use in this function)
/home/nicola/Desktop/driver/ieee80211-1.2.18/ieee80211_module.c:268: error: (Each undeclared identifier is reported only once
/home/nicola/Desktop/driver/ieee80211-1.2.18/ieee80211_module.c:268: error: for each function it appears in.)
/home/nicola/Desktop/driver/ieee80211-1.2.18/ieee80211_module.c: In function 'ieee80211_exit':
/home/nicola/Desktop/driver/ieee80211-1.2.18/ieee80211_module.c:297: error: 'proc_net' undeclared (first use in this function)
make[2]: *** [/home/nicola/Desktop/driver/ieee80211-1.2.18/ieee80211_module.o] Error 1
make[1]: *** [_module_/home/nicola/Desktop/driver/ieee80211-1.2.18] Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.24.3'
make: *** [modules] Error 2


ho provato ugualmente a mettere i firmware nella directory /lib/firmware ma niente mi da sempre lo stesso output in dmesg..

Re: problema Boot con kernel 2.6.24.3

Inviato: sab 15 mar 2008, 21:43
da tigerwalk
vedi bene, non credo tu debba installare ieee80211 perchè nel kernel sono presenti, devi solo compilare i moduli

Codice: Seleziona tutto

# cat /usr/src/linux/.config | grep IEEE80211
CONFIG_IEEE80211=y
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=y
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_IEEE80211_SOFTMAC=m
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set

Re: problema Boot con kernel 2.6.24.3

Inviato: sab 15 mar 2008, 21:50
da conraid
paZ_ ha scritto: ora ho letto che devo installare il subsystem ieee80211 e ipw2200
Come ti hanno detto hai già queste cose nel kernel.
firmware != driver
Scarica il firmware per la tua scheda e mettilo in /lib/firmware
Prendi pure il pacchetto ipw2200-fw-3.0-fw-1.tgz della -current, tanto è un firmware e va anche con la 12

Re: problema Boot con kernel 2.6.24.3

Inviato: sab 15 mar 2008, 22:06
da paZ_
grazie a todos ho risolto..

ho ricompilato il kernel e messo come modulo tutta la parte che sta sotto networking --> wireless
ho messo tutto come moduli tranne "nl80211 new netlink interface support" che ho messo in built-in

poi su Device Drivers --> Network Device support ---> Wireless LAN
ho messo come moduli i driver ipw2200

salvato ricompilato il kernel.. riavviato e nessun problema :)

N.B. su original avevo installato a mano ieee80211 e ipw2200 e messo i firmware..

grazie a todos..

unico dubbio.. :-k
ho la wireless su eth2 e non su eth1

Re: problema Boot con kernel 2.6.24.3

Inviato: sab 15 mar 2008, 22:13
da conraid
paZ_ ha scritto: ho la wireless su eth2 e non su eth1
Controllo udev
Ora non ricordo nella 12 quale era il file esatto
Tutti gli orari sono UTC+02:00
Pagina 1 di 1

Creato da phpBB® Forum Software © phpBB Limited

Traduzione Italiana phpBB-Store.it