Pagina 1 di 1

[RISOLTO] Problemi con la stampante Epson EPL-5900L

Inviato: lun 19 gen 2009, 17:08
da scorpion77
Ciao a tutti,
uso Slackware 12.2 e non riesco a stampare con la stampante Epson EPL-5900L. Ho installato tutti i driver più recenti, ma non funziona. CUPS riconosce la stampante, ma al momento di stampare una pagina di prova non si muove. Questi sono i pacchetti che ho installato (scaricati da qui: http://www.linuxprinting.org/download/foomatic):

foomatic-db-4.0-20090119.tar.gz
foomatic-db-engine-4.0-20090119.tar.gz
foomatic-db-hpijs-20090119.tar.gz
foomatic-filters-4.0-20090119.tar.gz
epsoneplijs-0.4.1.tgz


Questo è quello che appare nella pagina Printers dell'interfaccia web di CUPS:

Stampante "/usr/lib/cups/filter/foomatic-rip failed"

Description: Epson
Location: Casa
Printer Driver: Epson EPL-5900L Foomatic/epl5900l (recommended)
Printer State: idle, accepting jobs, published.
Device URI: usb://EPSON/EPL-5900L


Questo è l'error log di CUPS:

Codice: Seleziona tutto

D [19/Jan/2009:16:35:14 +0100] cupsdReadClient: 13 GET /printers/Stampante?op=print-test-page HTTP/1.1
D [19/Jan/2009:16:35:14 +0100] cupsdAuthorize: No authentication data provided.
D [19/Jan/2009:16:35:14 +0100] [CGI] /usr/lib/cups/cgi-bin/printers.cgi started - PID = 4819
I [19/Jan/2009:16:35:14 +0100] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=4819)
D [19/Jan/2009:16:35:14 +0100] cupsdSendCommand: 13 file=7
D [19/Jan/2009:16:35:14 +0100] cupsdAcceptClient: 8 from localhost (Domain)
D [19/Jan/2009:16:35:14 +0100] cupsdReadClient: 8 POST /printers/Stampante HTTP/1.1
D [19/Jan/2009:16:35:14 +0100] cupsdAuthorize: No authentication data provided.
D [19/Jan/2009:16:35:14 +0100] Print-Job ipp://localhost:631/printers/Stampante
D [19/Jan/2009:16:35:14 +0100] Adding default job-sheets values "none,none"...
I [19/Jan/2009:16:35:14 +0100] [Job 25] Adding start banner page "none".
D [19/Jan/2009:16:35:14 +0100] Discarding unused job-created event...
I [19/Jan/2009:16:35:14 +0100] [Job 25] Adding end banner page "none".
I [19/Jan/2009:16:35:14 +0100] [Job 25] File of type application/postscript queued by "anonymous".
D [19/Jan/2009:16:35:14 +0100] [Job 25] hold_until=0
I [19/Jan/2009:16:35:14 +0100] [Job 25] Queued on "Stampante" by "anonymous".
D [19/Jan/2009:16:35:14 +0100] Discarding unused printer-state-changed event...
D [19/Jan/2009:16:35:14 +0100] [Job 25] job-sheets=none,none
D [19/Jan/2009:16:35:14 +0100] [Job 25] banner_page = 0
D [19/Jan/2009:16:35:14 +0100] [Job 25] argv[0]="Stampante"
D [19/Jan/2009:16:35:14 +0100] [Job 25] argv[1]="25"
D [19/Jan/2009:16:35:14 +0100] [Job 25] argv[2]="anonymous"
D [19/Jan/2009:16:35:14 +0100] [Job 25] argv[3]="Test Page"
D [19/Jan/2009:16:35:14 +0100] [Job 25] argv[4]="1"
D [19/Jan/2009:16:35:14 +0100] [Job 25] argv[5]="job-uuid=urn:uuid:4c2789c3-0503-3973-5f45-7fcf73a74e78"
D [19/Jan/2009:16:35:14 +0100] [Job 25] argv[6]="/var/spool/cups/d00025-001"
D [19/Jan/2009:16:35:14 +0100] [Job 25] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [19/Jan/2009:16:35:14 +0100] [Job 25] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [19/Jan/2009:16:35:14 +0100] [Job 25] envp[2]="CUPS_DOCROOT=/usr/share/doc/cups"
D [19/Jan/2009:16:35:14 +0100] [Job 25] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [19/Jan/2009:16:35:14 +0100] [Job 25] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [19/Jan/2009:16:35:14 +0100] [Job 25] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [19/Jan/2009:16:35:14 +0100] [Job 25] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [19/Jan/2009:16:35:14 +0100] [Job 25] envp[7]="CUPS_STATEDIR=/var/run/cups"
D [19/Jan/2009:16:35:14 +0100] [Job 25] envp[8]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [19/Jan/2009:16:35:14 +0100] [Job 25] envp[9]="SERVER_ADMIN=root@darkstar.example.net"
D [19/Jan/2009:16:35:14 +0100] [Job 25] envp[10]="SOFTWARE=CUPS/1.3.9"
D [19/Jan/2009:16:35:14 +0100] [Job 25] envp[11]="TMPDIR=/var/spool/cups/tmp"
D [19/Jan/2009:16:35:14 +0100] [Job 25] envp[12]="USER=root"
D [19/Jan/2009:16:35:14 +0100] [Job 25] envp[13]="CUPS_SERVER=/var/run/cups/cups.sock"
D [19/Jan/2009:16:35:14 +0100] [Job 25] envp[14]="CUPS_ENCRYPTION=IfRequested"
D [19/Jan/2009:16:35:14 +0100] [Job 25] envp[15]="IPP_PORT=631"
D [19/Jan/2009:16:35:14 +0100] [Job 25] envp[16]="CHARSET=utf-8"
D [19/Jan/2009:16:35:14 +0100] [Job 25] envp[17]="LANG=en_US.UTF8"
D [19/Jan/2009:16:35:14 +0100] [Job 25] envp[18]="PPD=/etc/cups/ppd/Stampante.ppd"
D [19/Jan/2009:16:35:14 +0100] [Job 25] envp[19]="RIP_MAX_CACHE=8m"
D [19/Jan/2009:16:35:14 +0100] [Job 25] envp[20]="CONTENT_TYPE=application/postscript"
D [19/Jan/2009:16:35:14 +0100] [Job 25] envp[21]="DEVICE_URI=usb://EPSON/EPL-5900L"
D [19/Jan/2009:16:35:14 +0100] [Job 25] envp[22]="PRINTER=Stampante"
D [19/Jan/2009:16:35:14 +0100] [Job 25] envp[23]="FINAL_CONTENT_TYPE=printer/Stampante"
I [19/Jan/2009:16:35:14 +0100] [Job 25] Started filter /usr/lib/cups/filter/pstops (PID 4820)
I [19/Jan/2009:16:35:14 +0100] [Job 25] Started filter /usr/lib/cups/filter/foomatic-rip (PID 4821)
I [19/Jan/2009:16:35:14 +0100] [Job 25] Started backend /usr/lib/cups/backend/usb (PID 4822)
D [19/Jan/2009:16:35:14 +0100] Discarding unused job-state-changed event...
D [19/Jan/2009:16:35:14 +0100] cupsdProcessIPPRequest: 8 status_code=0 (successful-ok)
D [19/Jan/2009:16:35:14 +0100] PID 4820 (/usr/lib/cups/filter/pstops) exited with no errors.
D [19/Jan/2009:16:35:14 +0100] [Job 25] Page = 595x842; 12,12 to 583,830
D [19/Jan/2009:16:35:14 +0100] [Job 25] slow_collate=0, slow_duplex=0, slow_order=0
D [19/Jan/2009:16:35:14 +0100] [Job 25] Before copy_comments - %!PS-Adobe-3.0
D [19/Jan/2009:16:35:14 +0100] [Job 25] %!PS-Adobe-3.0
D [19/Jan/2009:16:35:14 +0100] [Job 25] %%BoundingBox: 0 0 612 792
D [19/Jan/2009:16:35:14 +0100] [Job 25] %%Pages: 1
D [19/Jan/2009:16:35:14 +0100] [Job 25] %%LanguageLevel: 1
D [19/Jan/2009:16:35:14 +0100] [Job 25] %%DocumentData: Clean7Bit
D [19/Jan/2009:16:35:14 +0100] [Job 25] %%DocumentSuppliedResources: procset testprint/1.3
D [19/Jan/2009:16:35:14 +0100] [Job 25] %%DocumentNeededResources: font Helvetica Helvetica-Bold Times-Roman
D [19/Jan/2009:16:35:14 +0100] [Job 25] %%Creator: Michael Sweet, Apple Inc.
D [19/Jan/2009:16:35:14 +0100] [Job 25] %%CreationDate: D:20070606214000+0500
D [19/Jan/2009:16:35:14 +0100] [Job 25] %%Title: Test Page
D [19/Jan/2009:16:35:14 +0100] [Job 25] %%EndComments
D [19/Jan/2009:16:35:14 +0100] [Job 25] Before copy_prolog - %%BeginProlog
D [19/Jan/2009:16:35:14 +0100] [Job 25] Before copy_setup - %%Page: 1 1
D [19/Jan/2009:16:35:14 +0100] [Job 25] Before page loop - %%Page: 1 1
D [19/Jan/2009:16:35:14 +0100] [Job 25] Copying page 1...
D [19/Jan/2009:16:35:14 +0100] [Job 25] pagew = 571.0, pagel = 818.0
D [19/Jan/2009:16:35:14 +0100] [Job 25] bboxx = 0, bboxy = 0, bboxw = 595, bboxl = 842
D [19/Jan/2009:16:35:14 +0100] [Job 25] PageLeft = 12.0, PageRight = 583.0
D [19/Jan/2009:16:35:14 +0100] [Job 25] PageTop = 830.0, PageBottom = 12.0
D [19/Jan/2009:16:35:14 +0100] [Job 25] PageWidth = 595.0, PageLength = 842.0
D [19/Jan/2009:16:35:14 +0100] [Job 25] Wrote 1 pages...
D [19/Jan/2009:16:35:14 +0100] [Job 25] Getting input from file 
D [19/Jan/2009:16:35:14 +0100] [Job 25] foomatic-rip version 4.0.0.195 running...
D [19/Jan/2009:16:35:14 +0100] [Job 25] Parsing PPD file ...
D [19/Jan/2009:16:35:14 +0100] [Job 25] Added option Resolution
D [19/Jan/2009:16:35:14 +0100] [Job 25] Added option PageSize
D [19/Jan/2009:16:35:14 +0100] [Job 25] Added option ImageableArea
D [19/Jan/2009:16:35:14 +0100] [Job 25] Added option PaperDimension
D [19/Jan/2009:16:35:14 +0100] [Job 25] Added option PrintoutMode
D [19/Jan/2009:16:35:14 +0100] [Job 25] Added option FlowControl
D [19/Jan/2009:16:35:14 +0100] [Job 25] Added option Density
D [19/Jan/2009:16:35:14 +0100] [Job 25] Added option TonerSave
D [19/Jan/2009:16:35:14 +0100] [Job 25] Added option Dpi
D [19/Jan/2009:16:35:14 +0100] [Job 25] Added option Ritech
D [19/Jan/2009:16:35:14 +0100] [Job 25] Added option Font
D [19/Jan/2009:16:35:14 +0100] [Job 25] 
D [19/Jan/2009:16:35:14 +0100] [Job 25] Parameter Summary
D [19/Jan/2009:16:35:14 +0100] [Job 25] -----------------
D [19/Jan/2009:16:35:14 +0100] [Job 25] 
D [19/Jan/2009:16:35:14 +0100] [Job 25] Spooler: cups
D [19/Jan/2009:16:35:14 +0100] [Job 25] Printer: Stampante
D [19/Jan/2009:16:35:14 +0100] [Job 25] Shell: /bin/bash
D [19/Jan/2009:16:35:14 +0100] [Job 25] PPD file: /etc/cups/ppd/Stampante.ppd
D [19/Jan/2009:16:35:14 +0100] [Job 25] ATTR file: 
D [19/Jan/2009:16:35:14 +0100] [Job 25] Printer model: Epson EPL-5900L Foomatic/epl5900l (recommended)
D [19/Jan/2009:16:35:14 +0100] [Job 25] Job title: Test Page
D [19/Jan/2009:16:35:14 +0100] [Job 25] File(s) to be printed:
D [19/Jan/2009:16:35:14 +0100] [Job 25] <STDIN>
D [19/Jan/2009:16:35:14 +0100] [Job 25] 
D [19/Jan/2009:16:35:14 +0100] [Job 25] Ghostscript extra search path ('GS_LIB'): /usr/share/cups/fonts
D [19/Jan/2009:16:35:14 +0100] [Job 25] Pondering option 'job-uuid=urn:uuid:4c2789c3-0503-3973-5f45-7fcf73a74e78'
D [19/Jan/2009:16:35:14 +0100] [Job 25] Unknown option job-uuid=urn:uuid:4c2789c3-0503-3973-5f45-7fcf73a74e78.
D [19/Jan/2009:16:35:14 +0100] [Job 25] 
D [19/Jan/2009:16:35:14 +0100] [Job 25] ================================================
D [19/Jan/2009:16:35:14 +0100] [Job 25] 
D [19/Jan/2009:16:35:14 +0100] [Job 25] File: <STDIN>
D [19/Jan/2009:16:35:14 +0100] [Job 25] 
D [19/Jan/2009:16:35:14 +0100] [Job 25] ================================================
D [19/Jan/2009:16:35:14 +0100] [Job 25] 
D [19/Jan/2009:16:35:14 +0100] [Job 25] Filetype: PostScript
D [19/Jan/2009:16:35:14 +0100] [Job 25] Reading PostScript input ...
D [19/Jan/2009:16:35:14 +0100] [Job 25] --> This document is DSC-conforming!
D [19/Jan/2009:16:35:14 +0100] [Job 25] Found %RBINumCopies: 1
D [19/Jan/2009:16:35:14 +0100] [Job 25] 
D [19/Jan/2009:16:35:14 +0100] [Job 25] -----------
D [19/Jan/2009:16:35:14 +0100] [Job 25] Found: %%BeginProlog
D [19/Jan/2009:16:35:14 +0100] Discarding unused printer-state-changed event...
D [19/Jan/2009:16:35:14 +0100] [Job 25] Found: %%EndProlog
D [19/Jan/2009:16:35:14 +0100] [Job 25] 
D [19/Jan/2009:16:35:14 +0100] [Job 25] -----------
D [19/Jan/2009:16:35:14 +0100] [Job 25] Found: %%BeginSetup
D [19/Jan/2009:16:35:14 +0100] [Job 25] Found: %%BeginFeature: *PrintoutMode Normal
D [19/Jan/2009:16:35:14 +0100] [Job 25] Option: PrintoutMode=Normal
D [19/Jan/2009:16:35:14 +0100] [Job 25] Setting option
D [19/Jan/2009:16:35:14 +0100] [Job 25] Found: %% FoomaticRIPOptionSetting: PrintoutMode=Normal
D [19/Jan/2009:16:35:14 +0100] [Job 25] Option: PrintoutMode=Normal
D [19/Jan/2009:16:35:14 +0100] [Job 25] Setting option
D [19/Jan/2009:16:35:14 +0100] [Job 25] Found: %%BeginFeature: *PageSize A4
D [19/Jan/2009:16:35:14 +0100] [Job 25] Option: PageSize=A4
D [19/Jan/2009:16:35:14 +0100] [Job 25] --> Option will be set by PostScript interpreter
D [19/Jan/2009:16:35:14 +0100] [Job 25] Found: %%BeginFeature: *FlowControl Off
D [19/Jan/2009:16:35:14 +0100] [Job 25] Option: FlowControl=Off
D [19/Jan/2009:16:35:14 +0100] [Job 25] Setting option
D [19/Jan/2009:16:35:14 +0100] [Job 25] Found: %% FoomaticRIPOptionSetting: FlowControl=Off
D [19/Jan/2009:16:35:14 +0100] [Job 25] Option: FlowControl=Off
D [19/Jan/2009:16:35:14 +0100] [Job 25] Setting option
D [19/Jan/2009:16:35:14 +0100] [Job 25] Found: %%BeginFeature: *Dpi FromPrintoutMode
D [19/Jan/2009:16:35:14 +0100] [Job 25] Option: Dpi=FromPrintoutMode
D [19/Jan/2009:16:35:14 +0100] [Job 25] Setting option
D [19/Jan/2009:16:35:14 +0100] [Job 25] Found: %% FoomaticRIPOptionSetting: Dpi=@PrintoutMode
D [19/Jan/2009:16:35:14 +0100] [Job 25] Option: Dpi=FromPrintoutMode
D [19/Jan/2009:16:35:14 +0100] [Job 25] Setting option
D [19/Jan/2009:16:35:14 +0100] [Job 25] Found: %%BeginFeature: *Density 3
D [19/Jan/2009:16:35:14 +0100] [Job 25] Option: Density=3
D [19/Jan/2009:16:35:14 +0100] [Job 25] Setting option
D [19/Jan/2009:16:35:14 +0100] [Job 25] Found: %% FoomaticRIPOptionSetting: Density=3
D [19/Jan/2009:16:35:14 +0100] [Job 25] Option: Density=3
D [19/Jan/2009:16:35:14 +0100] [Job 25] Setting option
D [19/Jan/2009:16:35:14 +0100] [Job 25] Found: %%BeginFeature: *Ritech FromPrintoutMode
D [19/Jan/2009:16:35:14 +0100] [Job 25] Option: Ritech=FromPrintoutMode
D [19/Jan/2009:16:35:14 +0100] [Job 25] Setting option
D [19/Jan/2009:16:35:14 +0100] [Job 25] Found: %% FoomaticRIPOptionSetting: Ritech=@PrintoutMode
D [19/Jan/2009:16:35:14 +0100] [Job 25] Option: Ritech=FromPrintoutMode
D [19/Jan/2009:16:35:14 +0100] [Job 25] Setting option
D [19/Jan/2009:16:35:14 +0100] [Job 25] Found: %%BeginFeature: *TonerSave FromPrintoutMode
D [19/Jan/2009:16:35:14 +0100] [Job 25] Option: TonerSave=FromPrintoutMode
D [19/Jan/2009:16:35:14 +0100] [Job 25] Setting option
D [19/Jan/2009:16:35:14 +0100] [Job 25] Found: %% FoomaticRIPOptionSetting: TonerSave=@PrintoutMode
D [19/Jan/2009:16:35:14 +0100] [Job 25] Option: TonerSave=FromPrintoutMode
D [19/Jan/2009:16:35:14 +0100] [Job 25] Setting option
D [19/Jan/2009:16:35:14 +0100] [Job 25] Found: %%EndSetup
D [19/Jan/2009:16:35:14 +0100] [Job 25] Inserting PostScript code for CUPS' page accounting
D [19/Jan/2009:16:35:14 +0100] [Job 25] 
D [19/Jan/2009:16:35:14 +0100] [Job 25] -----------
D [19/Jan/2009:16:35:14 +0100] [Job 25] New page: %%Page: 1 1
D [19/Jan/2009:16:35:14 +0100] [Job 25] 
D [19/Jan/2009:16:35:14 +0100] [Job 25] Found: %%BeginPageSetup
D [19/Jan/2009:16:35:14 +0100] [Job 25] Inserting option code into "PageSetup" section.
D [19/Jan/2009:16:35:14 +0100] [Job 25] Flushing FIFO.
D [19/Jan/2009:16:35:14 +0100] [Job 25] Printer using device file "/dev/usblp0"...
D [19/Jan/2009:16:35:14 +0100] [Job 25] backendRunLoop(print_fd=0, device_fd=5, use_bc=1, side_cb=0x80498f7)
D [19/Jan/2009:16:35:14 +0100] Discarding unused printer-state-changed event...
D [19/Jan/2009:16:35:14 +0100] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [19/Jan/2009:16:35:14 +0100] PID 4819 (/usr/lib/cups/cgi-bin/printers.cgi) exited with no errors.
D [19/Jan/2009:16:35:14 +0100] cupsdCloseClient: 8
D [19/Jan/2009:16:35:14 +0100] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [19/Jan/2009:16:35:14 +0100] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [19/Jan/2009:16:35:14 +0100] [Job 25] 
D [19/Jan/2009:16:35:14 +0100] [Job 25] Starting renderer with command: "gs -sstdout=%stderr  -dBATCH -dSAFER -dNOPAUSE -sProcessColorModel=DeviceGray -dBitsPerSample=1 -sDEVICE=ijs   -sIjsServer=ijs_server_epsonepl -dIjsUseOutputFD -sDeviceManufacturer=Epson -sDeviceModel=EPL5900L -sIjsParams="EplFlowControl=off,EplDpi=600,EplDensity=3,EplRitech=on,EplTonerSave=off," -sOutputFile=%stdout -"
D [19/Jan/2009:16:35:14 +0100] [Job 25] Starting process "kid3" (generation 1)
D [19/Jan/2009:16:35:14 +0100] [Job 25] Starting process "kid4" (generation 2)
D [19/Jan/2009:16:35:14 +0100] [Job 25] JCL: %-12345X@PJL
D [19/Jan/2009:16:35:14 +0100] [Job 25] <job data> 
D [19/Jan/2009:16:35:14 +0100] [Job 25] 
D [19/Jan/2009:16:35:14 +0100] [Job 25] Starting process "renderer" (generation 2)
D [19/Jan/2009:16:35:14 +0100] [Job 25] 
D [19/Jan/2009:16:35:14 +0100] [Job 25] Closing renderer
D [19/Jan/2009:16:35:15 +0100] [Job 25] GPL Ghostscript 8.63 (2008-08-01)
D [19/Jan/2009:16:35:15 +0100] [Job 25] Copyright (C) 2008 Artifex Software, Inc.  All rights reserved.
D [19/Jan/2009:16:35:15 +0100] [Job 25] This software comes with NO WARRANTY: see the file PUBLIC for details.
D [19/Jan/2009:16:35:15 +0100] [Job 25] sh: ijs_server_epsonepl: command not found
D [19/Jan/2009:16:35:15 +0100] [Job 25] GPL Ghostscript 8.63: Can't start ijs server "ijs_server_epsonepl"
D [19/Jan/2009:16:35:15 +0100] [Job 25] **** Unable to open the initial device, quitting.
D [19/Jan/2009:16:35:15 +0100] [Job 25] renderer exited with status 1
D [19/Jan/2009:16:35:15 +0100] [Job 25] Possible error on renderer command line or PostScript error. Check options.kid3 exited with status 3
D [19/Jan/2009:16:35:15 +0100] [Job 25] Process is dying with "Error closing renderer
D [19/Jan/2009:16:35:15 +0100] [Job 25] ", exit stat 3
D [19/Jan/2009:16:35:15 +0100] [Job 25] Cleaning up...
E [19/Jan/2009:16:35:15 +0100] PID 4821 (/usr/lib/cups/filter/foomatic-rip) stopped with status 3!
D [19/Jan/2009:16:35:15 +0100] PID 4822 (/usr/lib/cups/backend/usb) exited with no errors.
D [19/Jan/2009:16:35:15 +0100] [Job 25] File 0 is complete.
E [19/Jan/2009:16:35:15 +0100] [Job 25] Job stopped due to filter errors.
D [19/Jan/2009:16:35:15 +0100] Discarding unused printer-state-changed event...
D [19/Jan/2009:16:35:15 +0100] Discarding unused job-stopped event...
D [19/Jan/2009:16:35:16 +0100] [Job 25] Unloading...
D [19/Jan/2009:16:35:16 +0100] cupsdReadClient: 13 GET /admin HTTP/1.1
D [19/Jan/2009:16:35:16 +0100] cupsdAuthorize: No authentication data provided.
D [19/Jan/2009:16:35:16 +0100] [CGI] /usr/lib/cups/cgi-bin/admin.cgi started - PID = 4861
I [19/Jan/2009:16:35:16 +0100] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=4861)
D [19/Jan/2009:16:35:16 +0100] cupsdSendCommand: 13 file=7
D [19/Jan/2009:16:35:16 +0100] [CGI] admin.cgi started...
D [19/Jan/2009:16:35:16 +0100] cupsdAcceptClient: 8 from localhost (Domain)
D [19/Jan/2009:16:35:16 +0100] [CGI] http=0x80638d0
D [19/Jan/2009:16:35:16 +0100] [CGI] No form data, showing main menu...
D [19/Jan/2009:16:35:16 +0100] [CGI] /usr/share/cups/drivers/pscript5.dll: No such file or directory
D [19/Jan/2009:16:35:16 +0100] cupsdReadClient: 8 POST / HTTP/1.1
D [19/Jan/2009:16:35:16 +0100] cupsdAuthorize: No authentication data provided.
D [19/Jan/2009:16:35:16 +0100] Get-Subscriptions ipp://localhost/
D [19/Jan/2009:16:35:16 +0100] Get-Subscriptions client-error-not-found: No subscriptions found.
D [19/Jan/2009:16:35:16 +0100] cupsdProcessIPPRequest: 8 status_code=406 (client-error-not-found)
D [19/Jan/2009:16:35:16 +0100] PID 4861 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
D [19/Jan/2009:16:35:16 +0100] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [19/Jan/2009:16:35:16 +0100] cupsdCloseClient: 8
D [19/Jan/2009:16:35:16 +0100] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [19/Jan/2009:16:35:16 +0100] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [19/Jan/2009:16:35:17 +0100] cupsdReadClient: 13 GET /admin/log/error_log HTTP/1.1
D [19/Jan/2009:16:35:17 +0100] cupsdAuthorize: No authentication data provided.
Ho notato questi due errori:

E [19/Jan/2009:16:35:15 +0100] PID 4821 (/usr/lib/cups/filter/foomatic-rip) stopped with status 3!
E [19/Jan/2009:16:35:15 +0100] [Job 25] Job stopped due to filter errors.


Ma anche le righe poco più sopra di queste due evidenziano dei problemi, anche se non sono righe di errore.
Questa stampante funzionava benissimo fino alla Slackware 11.0, poi, dalla 12.0 in avanti non ha più funzionato (cosa sarà cambiato nel frattempo?). Per fortuna che non stampo molto, infatti fino adesso ho risolto usando la stampante in una virtual machine con Windows XP (un po' per pigrizia, un po' per mancanza di tempo), ma mi piacerebbe risolvere definitivamente il problema senza ricorrere a questo workaround. :thumbright:

Grazie per l'aiuto,

Scorpion77

Re: Problemi con la stampante Epson EPL-5900L

Inviato: mar 20 gen 2009, 17:04
da scorpion77
Ho provato a dare un'occhiata alle funzionalità della stampante usando il plugin Epson EPL-5x00L IJS, dando questo comando: ijs_server_epsonepl EPL-5900L /dev/usb/lp0.
Questo è l'output del comando:

Codice: Seleziona tutto

Confirmed EPL-5900L
Using kernel usb device
Found 5800L/5900L/6100L/6200L
IOC Get Protocols: 0002/0004
IOC Bus Address: 0002/0005
IOC Device ID String: MFG:EPSON;CMD:ESCPAGES-01;MDL:EPL-5900L;CLS:PRINTER;DES:EPSON EPL-5900L;
Confirmed EPL-5900L
Printer says:
  free memory        = 0x001fef80
  status(0x07)       = 0x00:
  status(0x09)       = 0x00:
  pages just printed = 0
0x11 extension:
  standby            = 2 (enabled)
  printed pages      = 3840
  toner supply       = 1%
  imaging supply     = 80%
  paper supply       = 100%
  low toner behav.   = 0 (go on)
updating free_mem from 0x00200000 to 0x001fef80
updating total_mem from 0x00000000 to 0x001fef80
Si può notare che indica il toner praticamente esaurito, mentre il mio toner è quasi nuovo. Però non è un toner originale Epson, infatti anche su Windows al momento di stampare appare una finestra che avverte che il toner è quasi esaurito, comunque è possibile stampare lo stesso.
Potrebbe essere questo il problema? Se fosse così, c'è qualche modo di fargli capire che il toner è quasi pieno?

Re: Problemi con la stampante Epson EPL-5900L

Inviato: mar 20 gen 2009, 18:18
da waka_jawaka
Secondo questa pagina http://openprinting.org/show_printer.cg ... -EPL-5900L i drivers raccomandati si chiamano epsonepl e li scarichi da qui:
http://sourceforge.net/project/showfile ... p_id=69547
Ciao

Re: Problemi con la stampante Epson EPL-5900L

Inviato: mar 20 gen 2009, 19:28
da scorpion77
waka_jawaka ha scritto:Secondo questa pagina http://openprinting.org/show_printer.cg ... -EPL-5900L i drivers raccomandati si chiamano epsonepl e li scarichi da qui:
http://sourceforge.net/project/showfile ... p_id=69547
Ciao
Lo so, infatti il pacchetto epsoneplijs-0.4.1.tgz l'ho scaricato proprio da lì, anche se nel mio primo post non l'ho specificato. Infatti il comando ijs_server_epsonepl EPL-5900L /dev/usb/lp0 funziona grazie al pacchetto epsoneplijs.
Comunque ti ringrazio.
Proverò a fare altre prove e spero di risolvere.

Re: Problemi con la stampante Epson EPL-5900L

Inviato: mer 21 gen 2009, 11:43
da scorpion77
Riassumo i progressi fatti.

Prima di tutto, avevo notato che CUPS non mi trovava la stampante se usavo la funzione "Find New Printers" nella scheda Administration. Poco male, perchè gli davo il PPD giusto, però ho notato che l'installazione del pacchetto epsoneplijs, nonostante non mi abbia dato alcun errore, non copiava i file *.ppd e *.xml nelle directory di foomatic e cups. Ora quando scelgo "Find New Printer" mi rileva questa stampante: EPSON EPL-5900L (EPSON EPL-5900L USB #1). Ho anche risolto il problema dei filtri foomatic, che generava questi errori:

E [19/Jan/2009:16:35:15 +0100] PID 4821 (/usr/lib/cups/filter/foomatic-rip) stopped with status 3!
E [19/Jan/2009:16:35:15 +0100] [Job 25] Job stopped due to filter errors.)

Infatti, nonostante abbia nel path di .bashrc la directory /usr/local/bin, dove risiede il programma ijs_server_epsonepl, il comando non veniva trovato, così l'ho copiato in /usr/bin. Ora nell'Error Log di CUPS non ci sono più errori, però continua a non stampare.
Se provo a stampare una pagina di prova, viene indicato questo nel pannello Printers:

EPSON_EPL-5900L_USB_1 "Printer is now on-line."

Description: EPSON EPL-5900L
Location: Local Printer
Printer Driver: Epson EPL-5900L Foomatic/epl5900l (recommended)
Printer State: processing, accepting jobs, published.
Device URI: usb://EPSON/EPL-5900L


Se provo a ristampare il job (Reprint Job), ottengo questo errore:

Error:

Job #46 is not complete!


Quindi elimino il job e ne lancio uno nuovo.
Adesso viene indicato questo nel pannello Printers:

EPSON_EPL-5900L_USB_1 "Printer busy; will retry in 5 seconds..."

Description: EPSON EPL-5900L
Location: Local Printer
Printer Driver: Epson EPL-5900L Foomatic/epl5900l (recommended)
Printer State: processing, accepting jobs, published.
Device URI: usb://EPSON/EPL-5900L


Questo è il log da quando provo a lanciare un nuovo job con la stampante occupata:

Codice: Seleziona tutto

D [21/Jan/2009:11:36:20 +0100] cupsdReadClient: 17 GET /printers/EPSON_EPL-5900L_USB_1?op=print-test-page HTTP/1.1
D [21/Jan/2009:11:36:20 +0100] cupsdAuthorize: Authorized as root using Basic
D [21/Jan/2009:11:36:20 +0100] [CGI] /usr/lib/cups/cgi-bin/printers.cgi started - PID = 21898
I [21/Jan/2009:11:36:20 +0100] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=21898)
D [21/Jan/2009:11:36:20 +0100] cupsdSendCommand: 17 file=11
D [21/Jan/2009:11:36:20 +0100] Report: clients=6
D [21/Jan/2009:11:36:20 +0100] Report: jobs=2
D [21/Jan/2009:11:36:20 +0100] Report: jobs-active=0
D [21/Jan/2009:11:36:20 +0100] Report: printers=1
D [21/Jan/2009:11:36:20 +0100] Report: printers-implicit=0
D [21/Jan/2009:11:36:20 +0100] Report: stringpool-string-count=370
D [21/Jan/2009:11:36:20 +0100] Report: stringpool-alloc-bytes=6704
D [21/Jan/2009:11:36:20 +0100] Report: stringpool-total-bytes=8560
D [21/Jan/2009:11:36:20 +0100] cupsdAcceptClient: 12 from localhost (Domain)
D [21/Jan/2009:11:36:20 +0100] cupsdReadClient: 12 POST /printers/EPSON_EPL-5900L_USB_1 HTTP/1.1
D [21/Jan/2009:11:36:20 +0100] cupsdAuthorize: No authentication data provided.
D [21/Jan/2009:11:36:20 +0100] Print-Job ipp://localhost:631/printers/EPSON_EPL-5900L_USB_1
D [21/Jan/2009:11:36:20 +0100] add_job: requesting-user-name="root"
D [21/Jan/2009:11:36:20 +0100] Adding default job-sheets values "none,none"...
I [21/Jan/2009:11:36:20 +0100] [Job 48] Adding start banner page "none".
D [21/Jan/2009:11:36:20 +0100] Discarding unused job-created event...
I [21/Jan/2009:11:36:20 +0100] [Job 48] Adding end banner page "none".
I [21/Jan/2009:11:36:20 +0100] [Job 48] File of type application/postscript queued by "root".
D [21/Jan/2009:11:36:20 +0100] [Job 48] hold_until=0
I [21/Jan/2009:11:36:20 +0100] [Job 48] Queued on "EPSON_EPL-5900L_USB_1" by "root".
D [21/Jan/2009:11:36:20 +0100] Discarding unused printer-state-changed event...
D [21/Jan/2009:11:36:20 +0100] [Job 48] job-sheets=none,none
D [21/Jan/2009:11:36:20 +0100] [Job 48] banner_page = 0
D [21/Jan/2009:11:36:20 +0100] [Job 48] argv[0]="EPSON_EPL-5900L_USB_1"
D [21/Jan/2009:11:36:20 +0100] [Job 48] argv[1]="48"
D [21/Jan/2009:11:36:20 +0100] [Job 48] argv[2]="root"
D [21/Jan/2009:11:36:20 +0100] [Job 48] argv[3]="Test Page"
D [21/Jan/2009:11:36:20 +0100] [Job 48] argv[4]="1"
D [21/Jan/2009:11:36:20 +0100] [Job 48] argv[5]="job-uuid=urn:uuid:89179280-d73f-3e12-4475-0bf2be1e3798"
D [21/Jan/2009:11:36:20 +0100] [Job 48] argv[6]="/var/spool/cups/d00048-001"
D [21/Jan/2009:11:36:20 +0100] [Job 48] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [21/Jan/2009:11:36:20 +0100] [Job 48] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [21/Jan/2009:11:36:20 +0100] [Job 48] envp[2]="CUPS_DOCROOT=/usr/share/doc/cups"
D [21/Jan/2009:11:36:20 +0100] [Job 48] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [21/Jan/2009:11:36:20 +0100] [Job 48] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [21/Jan/2009:11:36:20 +0100] [Job 48] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [21/Jan/2009:11:36:20 +0100] [Job 48] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [21/Jan/2009:11:36:20 +0100] [Job 48] envp[7]="CUPS_STATEDIR=/var/run/cups"
D [21/Jan/2009:11:36:20 +0100] [Job 48] envp[8]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [21/Jan/2009:11:36:20 +0100] [Job 48] envp[9]="SERVER_ADMIN=root@darkstar.example.net"
D [21/Jan/2009:11:36:20 +0100] [Job 48] envp[10]="SOFTWARE=CUPS/1.3.9"
D [21/Jan/2009:11:36:20 +0100] [Job 48] envp[11]="TMPDIR=/var/spool/cups/tmp"
D [21/Jan/2009:11:36:20 +0100] [Job 48] envp[12]="USER=root"
D [21/Jan/2009:11:36:20 +0100] [Job 48] envp[13]="CUPS_SERVER=/var/run/cups/cups.sock"
D [21/Jan/2009:11:36:20 +0100] [Job 48] envp[14]="CUPS_ENCRYPTION=IfRequested"
D [21/Jan/2009:11:36:20 +0100] [Job 48] envp[15]="IPP_PORT=631"
D [21/Jan/2009:11:36:20 +0100] [Job 48] envp[16]="CHARSET=utf-8"
D [21/Jan/2009:11:36:20 +0100] [Job 48] envp[17]="LANG=en_US.UTF8"
D [21/Jan/2009:11:36:20 +0100] [Job 48] envp[18]="PPD=/etc/cups/ppd/EPSON_EPL-5900L_USB_1.ppd"
D [21/Jan/2009:11:36:20 +0100] [Job 48] envp[19]="RIP_MAX_CACHE=8m"
D [21/Jan/2009:11:36:20 +0100] [Job 48] envp[20]="CONTENT_TYPE=application/postscript"
D [21/Jan/2009:11:36:20 +0100] [Job 48] envp[21]="DEVICE_URI=usb://EPSON/EPL-5900L"
D [21/Jan/2009:11:36:20 +0100] [Job 48] envp[22]="PRINTER=EPSON_EPL-5900L_USB_1"
D [21/Jan/2009:11:36:20 +0100] [Job 48] envp[23]="FINAL_CONTENT_TYPE=printer/EPSON_EPL-5900L_USB_1"
I [21/Jan/2009:11:36:20 +0100] [Job 48] Started filter /usr/lib/cups/filter/pstops (PID 21899)
I [21/Jan/2009:11:36:20 +0100] [Job 48] Started filter /usr/lib/cups/filter/foomatic-rip (PID 21900)
I [21/Jan/2009:11:36:20 +0100] [Job 48] Started backend /usr/lib/cups/backend/usb (PID 21901)
D [21/Jan/2009:11:36:20 +0100] Discarding unused job-state-changed event...
D [21/Jan/2009:11:36:20 +0100] cupsdProcessIPPRequest: 12 status_code=0 (successful-ok)
D [21/Jan/2009:11:36:20 +0100] PID 21899 (/usr/lib/cups/filter/pstops) exited with no errors.
D [21/Jan/2009:11:36:20 +0100] [Job 48] Page = 595x842; 12,12 to 583,830
D [21/Jan/2009:11:36:20 +0100] [Job 48] slow_collate=0, slow_duplex=0, slow_order=0
D [21/Jan/2009:11:36:20 +0100] [Job 48] Before copy_comments - %!PS-Adobe-3.0
D [21/Jan/2009:11:36:20 +0100] [Job 48] %!PS-Adobe-3.0
D [21/Jan/2009:11:36:20 +0100] [Job 48] %%BoundingBox: 0 0 612 792
D [21/Jan/2009:11:36:20 +0100] [Job 48] %%Pages: 1
D [21/Jan/2009:11:36:20 +0100] [Job 48] %%LanguageLevel: 1
D [21/Jan/2009:11:36:20 +0100] [Job 48] %%DocumentData: Clean7Bit
D [21/Jan/2009:11:36:20 +0100] [Job 48] %%DocumentSuppliedResources: procset testprint/1.3
D [21/Jan/2009:11:36:20 +0100] [Job 48] %%DocumentNeededResources: font Helvetica Helvetica-Bold Times-Roman
D [21/Jan/2009:11:36:20 +0100] [Job 48] %%Creator: Michael Sweet, Apple Inc.
D [21/Jan/2009:11:36:20 +0100] [Job 48] %%CreationDate: D:20070606214000+0500
D [21/Jan/2009:11:36:20 +0100] [Job 48] %%Title: Test Page
D [21/Jan/2009:11:36:20 +0100] [Job 48] %%EndComments
D [21/Jan/2009:11:36:20 +0100] [Job 48] Before copy_prolog - %%BeginProlog
D [21/Jan/2009:11:36:20 +0100] [Job 48] Before copy_setup - %%Page: 1 1
D [21/Jan/2009:11:36:20 +0100] [Job 48] Before page loop - %%Page: 1 1
D [21/Jan/2009:11:36:20 +0100] [Job 48] Copying page 1...
D [21/Jan/2009:11:36:20 +0100] [Job 48] pagew = 571.0, pagel = 818.0
D [21/Jan/2009:11:36:20 +0100] [Job 48] bboxx = 0, bboxy = 0, bboxw = 595, bboxl = 842
D [21/Jan/2009:11:36:20 +0100] [Job 48] PageLeft = 12.0, PageRight = 583.0
D [21/Jan/2009:11:36:20 +0100] [Job 48] PageTop = 830.0, PageBottom = 12.0
D [21/Jan/2009:11:36:20 +0100] [Job 48] PageWidth = 595.0, PageLength = 842.0
D [21/Jan/2009:11:36:20 +0100] [Job 48] Wrote 1 pages...
D [21/Jan/2009:11:36:20 +0100] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [21/Jan/2009:11:36:20 +0100] PID 21898 (/usr/lib/cups/cgi-bin/printers.cgi) exited with no errors.
D [21/Jan/2009:11:36:20 +0100] cupsdCloseClient: 12
D [21/Jan/2009:11:36:20 +0100] [Job 48] Getting input from file 
D [21/Jan/2009:11:36:20 +0100] [Job 48] foomatic-rip version 4.0.0.195 running...
D [21/Jan/2009:11:36:20 +0100] [Job 48] Parsing PPD file ...
D [21/Jan/2009:11:36:20 +0100] [Job 48] Added option Resolution
D [21/Jan/2009:11:36:20 +0100] [Job 48] Added option PageSize
D [21/Jan/2009:11:36:20 +0100] [Job 48] Added option ImageableArea
D [21/Jan/2009:11:36:20 +0100] [Job 48] Added option PaperDimension
D [21/Jan/2009:11:36:20 +0100] [Job 48] Added option FlowControl
D [21/Jan/2009:11:36:20 +0100] [Job 48] Added option Dpi
D [21/Jan/2009:11:36:20 +0100] [Job 48] Added option Ritech
D [21/Jan/2009:11:36:20 +0100] [Job 48] Added option TonerSave
D [21/Jan/2009:11:36:20 +0100] [Job 48] Added option Density
D [21/Jan/2009:11:36:20 +0100] [Job 48] Added option Font
D [21/Jan/2009:11:36:20 +0100] [Job 48] 
D [21/Jan/2009:11:36:20 +0100] [Job 48] Parameter Summary
D [21/Jan/2009:11:36:20 +0100] [Job 48] -----------------
D [21/Jan/2009:11:36:20 +0100] [Job 48] 
D [21/Jan/2009:11:36:20 +0100] [Job 48] Spooler: cups
D [21/Jan/2009:11:36:20 +0100] [Job 48] Printer: EPSON_EPL-5900L_USB_1
D [21/Jan/2009:11:36:20 +0100] [Job 48] Shell: /bin/bash
D [21/Jan/2009:11:36:20 +0100] [Job 48] PPD file: /etc/cups/ppd/EPSON_EPL-5900L_USB_1.ppd
D [21/Jan/2009:11:36:20 +0100] [Job 48] ATTR file: 
D [21/Jan/2009:11:36:20 +0100] [Job 48] Printer model: Epson EPL-5900L Foomatic/epl5900l (recommended)
D [21/Jan/2009:11:36:20 +0100] [Job 48] Job title: Test Page
D [21/Jan/2009:11:36:20 +0100] [Job 48] File(s) to be printed:
D [21/Jan/2009:11:36:20 +0100] [Job 48] <STDIN>
D [21/Jan/2009:11:36:20 +0100] [Job 48] 
D [21/Jan/2009:11:36:20 +0100] [Job 48] Ghostscript extra search path ('GS_LIB'): /usr/share/cups/fonts
D [21/Jan/2009:11:36:20 +0100] [Job 48] Pondering option 'job-uuid=urn:uuid:89179280-d73f-3e12-4475-0bf2be1e3798'
D [21/Jan/2009:11:36:20 +0100] [Job 48] Unknown option job-uuid=urn:uuid:89179280-d73f-3e12-4475-0bf2be1e3798.
D [21/Jan/2009:11:36:20 +0100] [Job 48] 
D [21/Jan/2009:11:36:20 +0100] [Job 48] ================================================
D [21/Jan/2009:11:36:20 +0100] [Job 48] 
D [21/Jan/2009:11:36:20 +0100] [Job 48] File: <STDIN>
D [21/Jan/2009:11:36:20 +0100] [Job 48] 
D [21/Jan/2009:11:36:20 +0100] [Job 48] ================================================
D [21/Jan/2009:11:36:20 +0100] [Job 48] 
D [21/Jan/2009:11:36:20 +0100] [Job 48] Filetype: PostScript
D [21/Jan/2009:11:36:20 +0100] Discarding unused printer-state-changed event...
D [21/Jan/2009:11:36:20 +0100] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [21/Jan/2009:11:36:20 +0100] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [21/Jan/2009:11:36:20 +0100] [Job 48] Reading PostScript input ...
D [21/Jan/2009:11:36:20 +0100] [Job 48] --> This document is DSC-conforming!
D [21/Jan/2009:11:36:20 +0100] [Job 48] Found %RBINumCopies: 1
D [21/Jan/2009:11:36:20 +0100] [Job 48] 
D [21/Jan/2009:11:36:20 +0100] [Job 48] -----------
D [21/Jan/2009:11:36:20 +0100] [Job 48] Found: %%BeginProlog
D [21/Jan/2009:11:36:20 +0100] [Job 48] Found: %%EndProlog
D [21/Jan/2009:11:36:20 +0100] [Job 48] 
D [21/Jan/2009:11:36:20 +0100] [Job 48] -----------
D [21/Jan/2009:11:36:20 +0100] [Job 48] Found: %%BeginSetup
D [21/Jan/2009:11:36:20 +0100] [Job 48] Found: %%BeginFeature: *PageSize A4
D [21/Jan/2009:11:36:20 +0100] [Job 48] Option: PageSize=A4
D [21/Jan/2009:11:36:20 +0100] [Job 48] --> Option will be set by PostScript interpreter
D [21/Jan/2009:11:36:20 +0100] [Job 48] Found: %%BeginFeature: *FlowControl Off
D [21/Jan/2009:11:36:20 +0100] [Job 48] Option: FlowControl=Off
D [21/Jan/2009:11:36:20 +0100] [Job 48] Setting option
D [21/Jan/2009:11:36:20 +0100] [Job 48] Found: %% FoomaticRIPOptionSetting: FlowControl=Off
D [21/Jan/2009:11:36:20 +0100] [Job 48] Option: FlowControl=Off
D [21/Jan/2009:11:36:20 +0100] [Job 48] Setting option
D [21/Jan/2009:11:36:20 +0100] [Job 48] Found: %%BeginFeature: *Dpi 600x600dpi
D [21/Jan/2009:11:36:20 +0100] [Job 48] Option: Dpi=600x600dpi
D [21/Jan/2009:11:36:20 +0100] [Job 48] Setting option
D [21/Jan/2009:11:36:20 +0100] [Job 48] Found: %% FoomaticRIPOptionSetting: Dpi=600x600dpi
D [21/Jan/2009:11:36:20 +0100] [Job 48] Option: Dpi=600x600dpi
D [21/Jan/2009:11:36:20 +0100] [Job 48] Setting option
D [21/Jan/2009:11:36:20 +0100] [Job 48] Found: %%BeginFeature: *Density 3
D [21/Jan/2009:11:36:20 +0100] [Job 48] Option: Density=3
D [21/Jan/2009:11:36:20 +0100] [Job 48] Setting option
D [21/Jan/2009:11:36:20 +0100] [Job 48] Found: %% FoomaticRIPOptionSetting: Density=3
D [21/Jan/2009:11:36:20 +0100] [Job 48] Option: Density=3
D [21/Jan/2009:11:36:20 +0100] [Job 48] Setting option
D [21/Jan/2009:11:36:20 +0100] [Job 48] Found: %%BeginFeature: *Ritech On
D [21/Jan/2009:11:36:20 +0100] [Job 48] Option: Ritech=On
D [21/Jan/2009:11:36:20 +0100] [Job 48] Setting option
D [21/Jan/2009:11:36:20 +0100] [Job 48] Found: %% FoomaticRIPOptionSetting: Ritech=On
D [21/Jan/2009:11:36:20 +0100] [Job 48] Option: Ritech=On
D [21/Jan/2009:11:36:20 +0100] [Job 48] Setting option
D [21/Jan/2009:11:36:20 +0100] [Job 48] Found: %%BeginFeature: *TonerSave Off
D [21/Jan/2009:11:36:20 +0100] [Job 48] Option: TonerSave=Off
D [21/Jan/2009:11:36:20 +0100] [Job 48] Setting option
D [21/Jan/2009:11:36:20 +0100] [Job 48] Found: %% FoomaticRIPOptionSetting: TonerSave=Off
D [21/Jan/2009:11:36:20 +0100] [Job 48] Option: TonerSave=Off
D [21/Jan/2009:11:36:20 +0100] [Job 48] Setting option
D [21/Jan/2009:11:36:20 +0100] [Job 48] Found: %%EndSetup
D [21/Jan/2009:11:36:20 +0100] [Job 48] Inserting PostScript code for CUPS' page accounting
D [21/Jan/2009:11:36:20 +0100] [Job 48] 
D [21/Jan/2009:11:36:20 +0100] [Job 48] -----------
D [21/Jan/2009:11:36:20 +0100] [Job 48] New page: %%Page: 1 1
D [21/Jan/2009:11:36:20 +0100] [Job 48] 
D [21/Jan/2009:11:36:20 +0100] [Job 48] Found: %%BeginPageSetup
D [21/Jan/2009:11:36:20 +0100] [Job 48] Inserting option code into "PageSetup" section.
D [21/Jan/2009:11:36:20 +0100] [Job 48] Flushing FIFO.
D [21/Jan/2009:11:36:20 +0100] [Job 48] 
D [21/Jan/2009:11:36:20 +0100] [Job 48] Starting renderer with command: "gs -sstdout=%stderr  -dBATCH -dSAFER -dNOPAUSE -sProcessColorModel=DeviceGray -dBitsPerSample=1 -sDEVICE=ijs   -sIjsServer=ijs_server_epsonepl -dIjsUseOutputFD -sDeviceManufacturer=Epson -sDeviceModel=EPL5900L -sIjsParams="EplFlowControl=off,EplDpi=600,EplDensity=3,EplRitech=on,EplTonerSave=off," -sOutputFile=%stdout -"
D [21/Jan/2009:11:36:20 +0100] [Job 48] Starting process "kid3" (generation 1)
D [21/Jan/2009:11:36:20 +0100] [Job 48] Starting process "kid4" (generation 2)
D [21/Jan/2009:11:36:20 +0100] [Job 48] JCL: %-12345X@PJL
D [21/Jan/2009:11:36:20 +0100] [Job 48] <job data> 
D [21/Jan/2009:11:36:20 +0100] [Job 48] 
D [21/Jan/2009:11:36:20 +0100] [Job 48] Starting process "renderer" (generation 2)
D [21/Jan/2009:11:36:20 +0100] [Job 48] 
D [21/Jan/2009:11:36:20 +0100] [Job 48] Closing renderer
D [21/Jan/2009:11:36:20 +0100] [Job 48] GPL Ghostscript 8.63 (2008-08-01)
D [21/Jan/2009:11:36:20 +0100] [Job 48] Copyright (C) 2008 Artifex Software, Inc.  All rights reserved.
D [21/Jan/2009:11:36:20 +0100] [Job 48] This software comes with NO WARRANTY: see the file PUBLIC for details.
D [21/Jan/2009:11:36:20 +0100] [Job 48] getting page header
D [21/Jan/2009:11:36:20 +0100] [Job 48] Loading NimbusSanL-Bold font from /usr/share/ghostscript/fonts/n019004l.pfb... 2790956 1109447 8202392 6856535 1 done.
D [21/Jan/2009:11:36:20 +0100] [Job 48] Loading NimbusSanL-Regu font from /usr/share/ghostscript/fonts/n019003l.pfb... 2807620 1198443 8202392 6857304 1 done.
D [21/Jan/2009:11:36:20 +0100] [Job 48] Loading NimbusRomNo9L-Regu font from /usr/share/ghostscript/fonts/n021003l.pfb... 2944860 1354729 8202392 6858389 1 done.
D [21/Jan/2009:11:36:20 +0100] Discarding unused job-progress event...
D [21/Jan/2009:11:36:20 +0100] [Job 48] Received page 1: width 4758 x height 6817
D [21/Jan/2009:11:36:20 +0100] [Job 48] % IJS parameter: TopLeft = 0.167x0.167
D [21/Jan/2009:11:36:20 +0100] [Job 48] % IJS parameter: PaperSize = 8.26389x11.6944
D [21/Jan/2009:11:36:20 +0100] [Job 48] % IJS parameter: EplTonerSave = off
D [21/Jan/2009:11:36:20 +0100] [Job 48] % IJS parameter: EplRitech = on
D [21/Jan/2009:11:36:20 +0100] [Job 48] % IJS parameter: EplDensity = 3
D [21/Jan/2009:11:36:20 +0100] [Job 48] % IJS parameter: EplDpi = 600
D [21/Jan/2009:11:36:20 +0100] [Job 48] % IJS parameter: Dpi = 600x600
D [21/Jan/2009:11:36:20 +0100] [Job 48] % IJS parameter: EplFlowControl = off
D [21/Jan/2009:11:36:20 +0100] [Job 48] % IJS parameter: DeviceModel = EPL5900L
D [21/Jan/2009:11:36:20 +0100] [Job 48] % IJS parameter: DeviceManufacturer = Epson
D [21/Jan/2009:11:36:20 +0100] [Job 48] % IJS parameter: OutputFD = 11
D [21/Jan/2009:11:36:20 +0100] [Job 48] EplPaperType not set, using default Normal (0)
D [21/Jan/2009:11:36:20 +0100] [Job 48] EplCopies not set, using default (1)
D [21/Jan/2009:11:36:20 +0100] [Job 48] Bitmap size 4758x6817 (7.93x11.3617 in)
D [21/Jan/2009:11:36:21 +0100] cupsdReadClient: 6 GET /printers/EPSON_EPL-5900L_USB_1 HTTP/1.1
D [21/Jan/2009:11:36:21 +0100] cupsdAuthorize: Authorized as root using Basic
D [21/Jan/2009:11:36:21 +0100] [CGI] /usr/lib/cups/cgi-bin/printers.cgi started - PID = 21926
I [21/Jan/2009:11:36:21 +0100] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=21926)
D [21/Jan/2009:11:36:21 +0100] cupsdSendCommand: 6 file=11
D [21/Jan/2009:11:36:21 +0100] cupsdAcceptClient: 12 from localhost (Domain)
D [21/Jan/2009:11:36:21 +0100] cupsdReadClient: 12 POST / HTTP/1.1
D [21/Jan/2009:11:36:21 +0100] cupsdAuthorize: No authentication data provided.
D [21/Jan/2009:11:36:21 +0100] CUPS-Get-Default
D [21/Jan/2009:11:36:21 +0100] CUPS-Get-Default client-error-not-found: No default printer
D [21/Jan/2009:11:36:21 +0100] cupsdProcessIPPRequest: 12 status_code=406 (client-error-not-found)
D [21/Jan/2009:11:36:21 +0100] [CGI] show_printer(http=0x8078980, printer="EPSON_EPL-5900L_USB_1")
D [21/Jan/2009:11:36:21 +0100] cupsdReadClient: 12 POST / HTTP/1.1
D [21/Jan/2009:11:36:21 +0100] cupsdAuthorize: No authentication data provided.
D [21/Jan/2009:11:36:21 +0100] Get-Printer-Attributes ipp://localhost/printers/EPSON_EPL-5900L_USB_1
D [21/Jan/2009:11:36:21 +0100] cupsdProcessIPPRequest: 12 status_code=0 (successful-ok)
D [21/Jan/2009:11:36:21 +0100] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [21/Jan/2009:11:36:21 +0100] cupsdReadClient: 12 POST / HTTP/1.1
D [21/Jan/2009:11:36:21 +0100] cupsdAuthorize: No authentication data provided.
D [21/Jan/2009:11:36:21 +0100] Get-Jobs ipp://localhost:631/printers/EPSON_EPL-5900L_USB_1
D [21/Jan/2009:11:36:21 +0100] cupsdProcessIPPRequest: 12 status_code=0 (successful-ok)
D [21/Jan/2009:11:36:21 +0100] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [21/Jan/2009:11:36:21 +0100] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [21/Jan/2009:11:36:21 +0100] PID 21926 (/usr/lib/cups/cgi-bin/printers.cgi) exited with no errors.
D [21/Jan/2009:11:36:21 +0100] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [21/Jan/2009:11:36:21 +0100] cupsdCloseClient: 12
D [21/Jan/2009:11:36:21 +0100] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [21/Jan/2009:11:36:21 +0100] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [21/Jan/2009:11:36:21 +0100] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [21/Jan/2009:11:36:21 +0100] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [21/Jan/2009:11:36:21 +0100] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [21/Jan/2009:11:36:24 +0100] cupsdReadClient: 10 GET /admin HTTP/1.1
D [21/Jan/2009:11:36:24 +0100] cupsdAuthorize: Authorized as root using Basic
D [21/Jan/2009:11:36:24 +0100] [CGI] /usr/lib/cups/cgi-bin/admin.cgi started - PID = 21974
I [21/Jan/2009:11:36:24 +0100] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=21974)
D [21/Jan/2009:11:36:24 +0100] cupsdSendCommand: 10 file=11
D [21/Jan/2009:11:36:24 +0100] cupsdAcceptClient: 12 from localhost (Domain)
D [21/Jan/2009:11:36:24 +0100] [CGI] admin.cgi started...
D [21/Jan/2009:11:36:24 +0100] [CGI] http=0x80638d0
D [21/Jan/2009:11:36:24 +0100] [CGI] No form data, showing main menu...
D [21/Jan/2009:11:36:24 +0100] [CGI] /usr/share/cups/drivers/pscript5.dll: No such file or directory
D [21/Jan/2009:11:36:24 +0100] cupsdReadClient: 12 POST / HTTP/1.1
D [21/Jan/2009:11:36:24 +0100] cupsdAuthorize: No authentication data provided.
D [21/Jan/2009:11:36:24 +0100] Get-Subscriptions ipp://localhost/
D [21/Jan/2009:11:36:24 +0100] Get-Subscriptions client-error-not-found: No subscriptions found.
D [21/Jan/2009:11:36:24 +0100] cupsdProcessIPPRequest: 12 status_code=406 (client-error-not-found)
D [21/Jan/2009:11:36:24 +0100] PID 21974 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
D [21/Jan/2009:11:36:24 +0100] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [21/Jan/2009:11:36:24 +0100] cupsdCloseClient: 12
D [21/Jan/2009:11:36:24 +0100] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [21/Jan/2009:11:36:24 +0100] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [21/Jan/2009:11:36:25 +0100] Discarding unused printer-state-changed event...
D [21/Jan/2009:11:36:25 +0100] cupsdReadClient: 13 GET /jobs/ HTTP/1.1
D [21/Jan/2009:11:36:25 +0100] cupsdAuthorize: Authorized as root using Basic
D [21/Jan/2009:11:36:25 +0100] [CGI] /usr/lib/cups/cgi-bin/jobs.cgi started - PID = 21991
I [21/Jan/2009:11:36:25 +0100] Started "/usr/lib/cups/cgi-bin/jobs.cgi" (pid=21991)
D [21/Jan/2009:11:36:25 +0100] cupsdSendCommand: 13 file=11
D [21/Jan/2009:11:36:25 +0100] cupsdAcceptClient: 12 from localhost (Domain)
D [21/Jan/2009:11:36:25 +0100] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [21/Jan/2009:11:36:25 +0100] cupsdReadClient: 12 POST / HTTP/1.1
D [21/Jan/2009:11:36:25 +0100] cupsdAuthorize: No authentication data provided.
D [21/Jan/2009:11:36:25 +0100] Get-Jobs ipp://localhost/jobs
D [21/Jan/2009:11:36:25 +0100] cupsdProcessIPPRequest: 12 status_code=0 (successful-ok)
D [21/Jan/2009:11:36:25 +0100] PID 21991 (/usr/lib/cups/cgi-bin/jobs.cgi) exited with no errors.
D [21/Jan/2009:11:36:25 +0100] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [21/Jan/2009:11:36:25 +0100] cupsdCloseClient: 12
D [21/Jan/2009:11:36:25 +0100] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [21/Jan/2009:11:36:25 +0100] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [21/Jan/2009:11:36:25 +0100] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [21/Jan/2009:11:36:25 +0100] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [21/Jan/2009:11:36:25 +0100] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [21/Jan/2009:11:36:26 +0100] cupsdReadClient: 14 GET /admin HTTP/1.1
D [21/Jan/2009:11:36:26 +0100] cupsdAuthorize: Authorized as root using Basic
D [21/Jan/2009:11:36:26 +0100] [CGI] /usr/lib/cups/cgi-bin/admin.cgi started - PID = 22007
I [21/Jan/2009:11:36:26 +0100] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=22007)
D [21/Jan/2009:11:36:26 +0100] cupsdSendCommand: 14 file=11
D [21/Jan/2009:11:36:26 +0100] cupsdAcceptClient: 12 from localhost (Domain)
D [21/Jan/2009:11:36:26 +0100] [CGI] admin.cgi started...
D [21/Jan/2009:11:36:26 +0100] [CGI] http=0x80638d0
D [21/Jan/2009:11:36:26 +0100] [CGI] No form data, showing main menu...
D [21/Jan/2009:11:36:26 +0100] [CGI] /usr/share/cups/drivers/pscript5.dll: No such file or directory
D [21/Jan/2009:11:36:26 +0100] cupsdReadClient: 12 POST / HTTP/1.1
D [21/Jan/2009:11:36:26 +0100] cupsdAuthorize: No authentication data provided.
D [21/Jan/2009:11:36:26 +0100] Get-Subscriptions ipp://localhost/
D [21/Jan/2009:11:36:26 +0100] Get-Subscriptions client-error-not-found: No subscriptions found.
D [21/Jan/2009:11:36:26 +0100] cupsdProcessIPPRequest: 12 status_code=406 (client-error-not-found)
D [21/Jan/2009:11:36:26 +0100] PID 22007 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
D [21/Jan/2009:11:36:26 +0100] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [21/Jan/2009:11:36:26 +0100] cupsdCloseClient: 12
D [21/Jan/2009:11:36:26 +0100] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [21/Jan/2009:11:36:26 +0100] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [21/Jan/2009:11:36:27 +0100] cupsdCloseClient: 16
D [21/Jan/2009:11:36:27 +0100] cupsdReadClient: 17 GET /admin/log/error_log HTTP/1.1
D [21/Jan/2009:11:36:27 +0100] cupsdAuthorize: Authorized as root using Basic
Se adesso provo a dare il comando ijs_server_epsonepl EPL-5900L /dev/usb/lp0, ottengo questo output:

Confirmed EPL-5900L
Using kernel usb device
Can't open device EPL-5900L, aborting!
Kernel device: Device or resource busy


E questo succede anche se riavvio CUPS. Finchè non spengo e riaccendo la stampante, ijs_server_epsonepl indica che la stampante è occupata.
Qualche idea di dove risieda il problema?

Re: Problemi con la stampante Epson EPL-5900L

Inviato: ven 23 gen 2009, 11:48
da scorpion77
FUNZIONA!!!!

Quando andavo su "Find New Printers", CUPS rilevava un URI sbagliato (usb://EPSON/EPL-5900L). Ho dovuto metterlo manualmente, questo è l'URI corretto: parallel:/dev/usb/lp0, come spiegato in questo sito: http://www.openprinting.org/show_printe ... -EPL-5900L.

Scorpion77