slacky.eu


https://slacky.eu/forum/

kernel ricompilato, kernel sput......

https://slacky.eu/forum/viewtopic.php?f=1&t=30114

Pagina 1 di 1

kernel ricompilato, kernel sput......

Inviato: mar 6 ott 2009, 0:55
da thepaperboy
ciao a tutti,
ho ricompilato il kernel originale di slackware 2.6.29.6-smp cambiando l'impostazione del processo e togliendo i moduli per dell e ibm (già che c'ero). ora, se riavvio con il mio nuovo kernel, tutto ok. se avvio con quello vecchio, vedo questo nel dmseg che non mi torna

Codice: Seleziona tutto

sg: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
sg: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
hwmon: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
hwmon: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
hwmon: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
evdev: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
evdev: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
serio_raw: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
wmi: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
wmi: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
output: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
output: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
hwmon: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
hwmon: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
ac: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
battery: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
button: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
button: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
button: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
button: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
mii: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
rtc_lib: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
intel_rng: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
8139too: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
rtc_core: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
lib80211: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
rtc_cmos: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
psmouse: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
thermal_sys: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
thermal_sys: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
thermal_sys: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
thermal_sys: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
thermal_sys: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
snd_page_alloc: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
i2c_i801: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
agpgart: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
soundcore: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
processor: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
processor: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
processor: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
video: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
video: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
intel_agp: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
thermal: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
hwmon: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
hwmon: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
thermal_sys: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
thermal_sys: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
processor: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
processor: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
thermal: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
thermal: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
snd: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
snd_timer: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
snd_pcm: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
wl: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
snd_hwdep: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
snd_hda_codec: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
snd_hda_intel: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
fuse: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
parport: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
parport_pc: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
parport: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
lp: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
agpgart: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
appletalk: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
appletalk: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
appletalk: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
appletalk: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
appletalk: version magic '2.6.29.6-smp SMP mod_unload PENTIUM4 ' should be '2.6.29.6-smp SMP mod_unload 686 '
e quando do startx, x mi crascha ancora prima di avviarsi:

Codice: Seleziona tutto

bash-3.1# cat /root/Desktop/errorikernel2 
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/darkstar:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6

X.Org X Server 1.6.3
Release Date: 2009-7-31
X Protocol Version 11, Revision 0
Build Operating System: Slackware 13.0 Slackware Linux Project
Current Operating System: Linux darkstar 2.6.29.6-smp #2 SMP Mon Aug 17 00:52:54 CDT 2009 i686
Build Date: 03 August 2009  06:51:50PM
 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct  6 00:43:34 2009
(II) Loader magic: 0x1de0
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 5.0
	X.Org XInput driver : 4.0
	X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7

(--) PCI:*(0:0:2:0) 8086:27a2:103c:30a5 rev 3, Mem @ 0xd0200000/524288, 0xc0000000/268435456, 0xd0300000/262144, I/O @ 0x00001800/8
(--) PCI: (0:0:2:1) 8086:27a6:103c:30a5 rev 3, Mem @ 0xd0280000/524288
(==) Using default built-in configuration (39 lines)
(==) --- Start of built-in configuration ---
	Section "Device"
		Identifier	"Builtin Default intel Device 0"
		Driver	"intel"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default intel Screen 0"
		Device	"Builtin Default intel Device 0"
	EndSection
	Section "Device"
		Identifier	"Builtin Default i810 Device 0"
		Driver	"i810"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default i810 Screen 0"
		Device	"Builtin Default i810 Device 0"
	EndSection
	Section "Device"
		Identifier	"Builtin Default vesa Device 0"
		Driver	"vesa"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default vesa Screen 0"
		Device	"Builtin Default vesa Device 0"
	EndSection
	Section "Device"
		Identifier	"Builtin Default fbdev Device 0"
		Driver	"fbdev"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default fbdev Screen 0"
		Device	"Builtin Default fbdev Device 0"
	EndSection
	Section "ServerLayout"
		Identifier	"Builtin Default Layout"
		Screen	"Builtin Default intel Screen 0"
		Screen	"Builtin Default i810 Screen 0"
		Screen	"Builtin Default vesa Screen 0"
		Screen	"Builtin Default fbdev Screen 0"
	EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default intel Screen 0" (0)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default intel Device 0"
(==) No monitor specified for screen "Builtin Default intel Screen 0".
	Using a default monitor configuration.
(**) |-->Screen "Builtin Default i810 Screen 0" (1)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default i810 Device 0"
(==) No monitor specified for screen "Builtin Default i810 Screen 0".
	Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (2)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
	Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (3)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
	Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/local" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/CID" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/Type1,
	/usr/share/fonts/misc,
	/usr/share/fonts/75dpi/:unscaled,
	/usr/share/fonts/100dpi/:unscaled,
	/usr/share/fonts/75dpi,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/cyrillic,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
	If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 2.8.0
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "i810"
(WW) Warning, couldn't open module i810
(II) UnloadModule: "i810"
(EE) Failed to load module "i810" (module does not exist, 0)
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 2.2.1
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
	965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	Mobile Intel® GM45 Express Chipset,
	Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41, IGDNG_D,
	IGDNG_M
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(WW) Falling back to old probe method for vesa
(II) resource ranges after probing:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 0.1.0
	ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
drmOpenDevice: node name is /dev/dri/card0
[drm] failed to load kernel module "i915"
(EE) intel(0): [drm] Failed to open DRM device for : No such file or directory
(EE) intel(0): Failed to become DRM master.
(II) intel(0): Creating default Display subsection in Screen section
	"Builtin Default intel Screen 0" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
(--) intel(0): Chipset: "945GM"
(--) intel(0): Linear framebuffer at 0xC0000000
(--) intel(0): IO registers at addr 0xD0200000 size 524288
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(II) intel(0): No SDVO device is found in VBT
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA has no monitor section
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "LPL", prod id 48128
(II) intel(0): Output TV has no monitor section
(II) intel(0): EDID vendor "LPL", prod id 48128
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00000202 to 0x80000242
(WW) intel(0): PIPEBSTAT before: status: VSYNC_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS LBLC_EVENT_STATUS VBLANK_INT_STATUS
(WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x10000000 to 0x000c0000
(WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d
(WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104
(WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d
(WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200
(WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c
(WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200
(WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1
(WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359
(WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022
(WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344
(WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415
(WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607
(WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001
(WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710087
(WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x6b405140
(WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024
(WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198
(WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x800010bb
(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283
(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141
(WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060
(WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(EE) GARTInit: Unable to open /dev/agpgart (No such file or directory)
(EE) intel(0): /dev/agpgart is either not available, or no memory is available
for allocation.  Please enable agpgart
.(WW) intel(0): VideoRam reduced to 7928 KB (page aligned - was 7931 KB)
(WW) intel(0): DRI2: failed to open drm device
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(EE) intel(0): Failed to initialize kernel memory manager
(==) intel(0): VideoRam: 7928 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(EE) intel(0): AGP GART support is either not available or cannot be used.
	Make sure your kernel has agpgart support or has
	the agpgart module loaded.
(II) intel(0): Tiled allocation failed.
(WW) intel(0): Couldn't allocate tiled memory, fb compression disabled
(II) intel(0): Attempting memory allocation with untiled buffers.
(EE) intel(0): AGP GART support is either not available or cannot be used.
	Make sure your kernel has agpgart support or has
	the agpgart module loaded.
(II) intel(0): Untiled allocation failed.
(EE) intel(0): Couldn't allocate video memory

Fatal server error:
AddScreen/ScreenInit failed for driver 0


Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
devo dire che non ho la sicurezza che PENTIUM4 sia la scelta giusta per il mio processore (è indicato per i processori pentium D, che penso sia il mio dual core. funziona tutto, ma dovrei forse provare anche core2).

ora, se ritorno al mio kernel, non mi parte più x anche qui. solo che se insisto e riprovo startx, parte.

qualcuno ci capisce qualcosa?

Re: kernel ricomoilato, kernel sput......

Inviato: mar 6 ott 2009, 1:02
da Blallo
usa core2 e poi riprova

Re: kernel ricomoilato, kernel sput......

Inviato: mar 6 ott 2009, 1:09
da thepaperboy
jimmy_page_89 ha scritto:usa core2 e poi riprova
il fatto che funzioni senza dare errori, utilizzando il kernel con PENTIUM4 non significa nulla?
ho il dubbio di aver fatto questo casino: avendo ricompilato il kernel nella directory /usr/src/linux che puntava al kernel 2.6.29.6-smp che avevo in uso, temo che il vmlinuz-2.6.29.6-smp che usavo prima non andasse più bene per quello, è così? quindi per provare core2 devo ricompilare un kernel di versione diversa?

Re: kernel ricompilato, kernel sput......

Inviato: mar 6 ott 2009, 1:18
da Vic Steele
Hai ricompilato il 2.6.29.6 sui sorgenti di Pat?
Allora hai sovrascritto i moduli di /lib/modules con la tua configurazione. È normale che ti dia errori su vmlinuz generati per altre aspettative di compilazione.
Perché non hai provato con un kernel diverso?

Re: kernel ricompilato, kernel sput......

Inviato: mar 6 ott 2009, 1:25
da thepaperboy
Vic Steele ha scritto:Hai ricompilato il 2.6.29.6 sui sorgenti di Pat?
Allora hai sovrascritto i moduli di /lib/modules con la tua configurazione. È normale che ti dia errori su vmlinuz generati per altre aspettative di compilazione.
Perché non hai provato con un kernel diverso?
perché sono pirla

quindi non posso ricompilare lo stesso kernel?

Re: kernel ricompilato, kernel sput......

Inviato: mar 6 ott 2009, 1:46
da Blallo
puoi, ma se va stroto qualcosa ti freghi un kernel funzionante e devi ripiallare tutto....meglio usare un kernel differente oppure lo chiami in 2 modi diversi con 2 vmlinuz diversi

Re: kernel ricompilato, kernel sput......

Inviato: mar 6 ott 2009, 3:56
da Dani
thepaperboy ha scritto:
Vic Steele ha scritto:Hai ricompilato il 2.6.29.6 sui sorgenti di Pat?
Allora hai sovrascritto i moduli di /lib/modules con la tua configurazione. È normale che ti dia errori su vmlinuz generati per altre aspettative di compilazione.
Perché non hai provato con un kernel diverso?
perché sono pirla

quindi non posso ricompilare lo stesso kernel?
Si pero' se usi i moduli per non sovrascrivere quelli installati, dopo aver dato make xconfig devi selezionare Impostazioni generali -> Versione Locale - aggiungi al rilascio del kernel e modificare la stringa (di default vuota) aggiungendo una o piu' lettere.
Così se ad esempio inserisci "-test" i moduli verrano installati in /lib/modules/2.6.29.6-test.

Re: kernel ricompilato, kernel sput......

Inviato: mar 6 ott 2009, 8:29
da submax82
oppure usi kernelpkg :D che anche a parità di versione non sovrascive nulla :thumbright:

Re: kernel ricompilato, kernel sput......

Inviato: mar 6 ott 2009, 11:10
da thepaperboy
vabbe', quindi posso eliminare tutti i vmlnuz, config e system map vecchi e tenere solo i miei ricompilati, tanto gli altri sono fottuti, no? e in fondo i cambiamenti sono così pochi che non dovrei avere guai.

Re: kernel ricompilato, kernel sput......

Inviato: mar 6 ott 2009, 11:20
da targzeta
Dovresti disinstallare i pacchetti
  • kernel-huge (o quello che hai installato)
  • kernel-modules
piuttosto che eliminare i file. Poi però reinstalli i tuoi moduli con

Codice: Seleziona tutto

make modules_install
dai sorgenti del kernel.

Emanuele

Re: kernel ricompilato, kernel sput......

Inviato: mar 6 ott 2009, 11:33
da thepaperboy
spina ha scritto:Dovresti disinstallare i pacchetti
  • kernel-huge (o quello che hai installato)
  • kernel-modules
piuttosto che eliminare i file. Poi però reinstalli i tuoi moduli con

Codice: Seleziona tutto

make modules_install
dai sorgenti del kernel.

Emanuele
grazie. ho rimosso huge, mentre l'altro non so, è quello che ho ricompilato, quindi se rimuove con removepkg non mi frego il kernel?
inoltre, sto provando con dempode -a a caircare il modulo per il wireless ma ora mi dice che non trova il comando. basta riavviare?

Re: kernel ricompilato, kernel sput......

Inviato: mar 6 ott 2009, 12:01
da targzeta
thepaperboy ha scritto:...
grazie. ho rimosso huge, mentre l'altro non so, è quello che ho ricompilato, quindi se rimuove con removepkg non mi frego il kernel?
Dipende, se il nome del file del nuovo kernel è uguale a quello vecchio si, altrimenti no. Normalemente dopo che si ricompila il kernel, questo lo si installa in /boot come bzImage e quindi anche se rimuovi l'altro pacchetto non dovresti perdere niente. Per essere sicuro dovresti postare l'output di 'ls /boot'.
thepaperboy ha scritto:...
inoltre, sto provando con dempode -a a caircare il modulo per il wireless ma ora mi dice che non trova il comando. basta riavviare?
depmode non esiste, il comando si chiama depmod

Emanuele
Tutti gli orari sono UTC+02:00
Pagina 1 di 1

Creato da phpBB® Forum Software © phpBB Limited

Traduzione Italiana phpBB-Store.it