slacky.eu

Scusate se vi disturbo con questo problema
<BR>Dopo aver installato il kernel 2.6.10 sulla slack 10.1
<BR>il sistema non rileva piu il masterizzatore hdc mentre prima con il kernel 2.4.
<BR>e con l´emulazione ide-scsi funzionava come sr0.
<BR>di seguito vi invio il particolare del dmesg con l´errore.
<BR>Vi ringrazio anticipatamente
<BR>Ciao
<BR>8-)
<BR>Andrea
<BR>-------------------------------------------
<BR>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
<BR>divert: not allocating divert_blk for non-ethernet device lo
<BR>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<BR>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<BR>VP_IDE: IDE controller at PCI slot 0000:00:11.1
<BR>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
<BR>PCI: setting IRQ 11 as level-triggered
<BR>ACPI: PCI interrupt 0000:00:11.1[A] -> GSI 11 (level, low) -> IRQ 11
<BR>VP_IDE: chipset revision 6
<BR>VP_IDE: not 100% native mode: will probe irqs later
<BR>VP_IDE: VIA vt8233 (rev 00) IDE UDMA100 controller on pci0000:00:11.1
<BR> ide0: BM-DMA at 0xd400-0xd407, BIOS settings: hda:DMA, hdb:pio
<BR> ide1: BM-DMA at 0xd408-0xd40f, BIOS settings: hdc:DMA, hdd:DMA
<BR>Probing IDE interface ide0...
<BR>hda: MAXTOR 6L080J4, ATA DISK drive
<BR>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<BR>Probing IDE interface ide1...
<BR>hdc: PIONEER DVD-RW DVR-108, ATAPI CD/DVD-ROM drive
<BR>hdd: LITEON DVD-ROM LTD163, ATAPI CD/DVD-ROM drive
<BR>ide1 at 0x170-0x177,0x376 on irq 15
<BR>Probing IDE interface ide2...
<BR>ide2: Wait for ready failed before probe !
<BR>Probing IDE interface ide3...
<BR>ide3: Wait for ready failed before probe !
<BR>Probing IDE interface ide4...
<BR>ide4: Wait for ready failed before probe !
<BR>Probing IDE interface ide5...
<BR>ide5: Wait for ready failed before probe !
<BR>hda: max request size: 128KiB
<BR>hda: 156355584 sectors (80054 MB) w/1819KiB Cache, CHS=65535/16/63, UDMA(100)
<BR>hda: cache flushes supported
<BR> hda: hda1 hda2 hda3
<BR>hdd: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
<BR>Uniform CD-ROM driver Revision: 3.20
<BR>ide-floppy driver 0.99.newide
<BR>---------------------------------------------<br>

Non te lo rileva? E questo allora cos´è:
<BR>hdc: PIONEER DVD-RW DVR-108, ATAPI CD/DVD-ROM drive
<BR>
<BR>M.<br>

Con i kernel 2.6 non serve l´emulazione<br>

>Non te lo rileva? E questo allora cos´è:
<BR>>hdc: PIONEER DVD-RW DVR-108, ATAPI CD/DVD-ROM drive
<BR>
<BR>>M.
<BR>
<BR>Infatti la cosa strana che il kernel lo vede ma quando cerco di montarlo come hdc non lovede e nella directory /dev non esiste il file
<BR>
<BR>Ciao
<BR>8-)
<BR>Andrea<br>

La domanda è banale,
<BR>ma in ftab come lo hai messo?
<BR>
<BR>M.<br>