slacky.eu

ciao non riesco a risolvere questo problema: all'avvio non trovo hdc !!!
Uso 10.1
2.4.29
in lilo.conf
append="hdc=ide-scsi hdd=ide-scsi"
n° 2 HD su un canale
dvd-rom come hdd (slave), dvd-burn come hdc (master) su l'altro canale

dmesg | grep ide :
BIOS-provided physical RAM map:
Kernel command line: BOOT_IMAGE=Linux-2.4.29-01 ro root=341 hdc=ide-scsi hdd=ide-scsi
ide_setup: hdc=ide-scsi
ide_setup: hdd=ide-scsi
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15

dmesg | grep hdd:
Kernel command line: BOOT_IMAGE=Linux-2.4.29-01 ro root=341 hdc=ide-scsi hdd=ide-scsi
ide_setup: hdc=ide-scsi
ide_setup: hdd=ide-scsi
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 6Y080L0, ATA DISK drive
hdb: Maxtor 6Y080L0, ATA DISK drive
hdd: Pioneer DVD-ROM ATAPIModel DVD-103S 011, ATAPI CD/DVD-ROM drive
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=9964/255/63, UDMA(100)
hdb: attached ide-disk driver.
hdb: host protected area => 1
hdb: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=9964/255/63, UDMA(100)
hda: hda1 hda2 < hda5 >
hdb: hdb1 hdb2 hdb3
hdd: attached ide-scsi driver.


Avete qualche soluzioni sto controllando tutti i post di linux su tutte le distro (su Windows funziona)

eppure il bios lo rileva...

greppa ^hd, non hdd. comunque dopo che appendi quella roba il tuo mast sarà sr0 o scd0, non + hdc.

sono sempre io dimenticavo di postarvi anche questo....
cdrecord -scanbus:
0,0,0 0) 'PIONEER ' 'DVD-ROM DVD-103 ' '1.14' Removable CD-ROM
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
dov'è il masterizzatore piooner 107