slacky.eu

Codice: Seleziona tutto

#!/bin/bash
#  start_wlano
# Wireless  configuration/starting scripting


#Moduli necessari..
/sbin/modprobe acx_pci
/sbin/modprobe ndiswrapper


CHANNEL="3"
ESSID="G604T"
INTERFACE="wlan0"
IPADDR="192.168.1.12"
KEY=... # my 128 bit WEP key
MODE="Managed"
NETMASK="255.255.255.0" 
GATEWAY="192.168.1.10"

sleep 15

echo "Starting configuration  ${INTERFACE} for wlan...Enjoy!"

sleep 5
/sbin/ifconfig ${INTERFACE} ${IPADDR} netmask ${NETMASK} up
/sbin/route add default gw ${GATEWAY} wlan0
/sbin/iwconfig ${INTERFACE} essid ${ESSID}
/sbin/iwconfig ${INTERFACE} channel ${CHANNEL}
/sbin/iwconfig ${INTERFACE} mode ${MODE}
/sbin/iwconfig ${INTERFACE} rate 54M 
/sbin/iwconfig ${INTERFACE} key ${KEY}
/sbin/iwconfig ${INTERFACE} key open
echo "${INTERFACE} now works! "

Codice: Seleziona tutto

If  you  need  to set multiple keys, or set a key and change the
              active key, you need to use multiple key  directives.  Arguments
              can be put in any order, the last one will take precedence.
              Examples :
                   iwconfig eth0 key 0123-4567-89
                   iwconfig eth0 key [3] 0123-4567-89
                   iwconfig eth0 key s:password [2]
                   iwconfig eth0 key [2]
                   iwconfig eth0 key open
                   iwconfig eth0 key off
                   iwconfig eth0 key restricted [3] 0123456789
                   iwconfig eth0 key 01-23 key 45-67 [4] key [4]

Codice: Seleziona tutto

ifconfig wlan0 up