Epson R240 & epson inkjet utility
Inviato: gio 3 mag 2007, 23:58
Mi sono accorto, per caso, che nel centro di controllo --> Periferiche --> Stampanti, cliccando DX sul nome della stampante une voce del menù è Strumenti stampante --> Epson inkjet, questa simaptica utility ha 5 opzioni:
Pulisci testina
Stampa un motivo di prova ugelli
Allinea la testina
Livello inchiostro
Identificazione stampante.
Per quanto riguarda le prime due opzioni sembrano funzionare correttamente mentre allinea testina e livello inchiostro mi producono degli errori e precisamente per il primo:
Usage: escputil [-c | -n | -a | -i | -o | -s | -d | -l | -M] [-P printer | -r device] [-u] [-q] [-m model] Perform maintenance on EPSON Stylus (R) printers. Examples: escputil --clean-head --printer stpex-on-third-floor escputil --ink-level --new --raw-device /dev/lp0 Commands: -c|--clean-head Clean the print head. -n|--nozzle-check Print a nozzle test pattern. Dirty or clogged nozzles will show as gaps in the pattern. If you see any gaps, you should clean the print head. -a|--align-head Align the print head. CAUTION: Misuse of this utility may result in poor print quality and/or damage to the printer. -o|--align-color Align the color print head (Stylus Color 480 and 580 only). CAUTION: Misuse of this utility may result in poor print quality and/or damage to the printer. -s|--status etrieve printer status. -i|--ink-level Obtain the ink level from the printer. This requires read/write access to the raw printer device. -d|--identify Query the printer for make and model information. This requires read/write access to the raw printer device. -l|--license Display the license/warranty terms of this program. -M|--list-models List the available printer models. -h|--help Print this help message. Options: -P|--printer-name Specify the name of the printer queue to operate on. Default is the default system printer. -r|--raw-device Specify the name of the device to write to directly rather than going through a printer queue. -u|--new The printer is a new printer (Stylus Color 740 or newer). -q|--quiet Suppress the banner. -m|--model Specify the precise printer model or head alignment.
Errore
Printer alignment must be done with a raw device or else the -m option must be used to specify a printer.
mentre il secondo
Cannot parse output from printer
Avete esperienza in merito, a questa utility e sapete darmi una mano o se ci sono altri modi per fare queste operazioni?
Pulisci testina
Stampa un motivo di prova ugelli
Allinea la testina
Livello inchiostro
Identificazione stampante.
Per quanto riguarda le prime due opzioni sembrano funzionare correttamente mentre allinea testina e livello inchiostro mi producono degli errori e precisamente per il primo:
Usage: escputil [-c | -n | -a | -i | -o | -s | -d | -l | -M] [-P printer | -r device] [-u] [-q] [-m model] Perform maintenance on EPSON Stylus (R) printers. Examples: escputil --clean-head --printer stpex-on-third-floor escputil --ink-level --new --raw-device /dev/lp0 Commands: -c|--clean-head Clean the print head. -n|--nozzle-check Print a nozzle test pattern. Dirty or clogged nozzles will show as gaps in the pattern. If you see any gaps, you should clean the print head. -a|--align-head Align the print head. CAUTION: Misuse of this utility may result in poor print quality and/or damage to the printer. -o|--align-color Align the color print head (Stylus Color 480 and 580 only). CAUTION: Misuse of this utility may result in poor print quality and/or damage to the printer. -s|--status etrieve printer status. -i|--ink-level Obtain the ink level from the printer. This requires read/write access to the raw printer device. -d|--identify Query the printer for make and model information. This requires read/write access to the raw printer device. -l|--license Display the license/warranty terms of this program. -M|--list-models List the available printer models. -h|--help Print this help message. Options: -P|--printer-name Specify the name of the printer queue to operate on. Default is the default system printer. -r|--raw-device Specify the name of the device to write to directly rather than going through a printer queue. -u|--new The printer is a new printer (Stylus Color 740 or newer). -q|--quiet Suppress the banner. -m|--model Specify the precise printer model or head alignment.
Errore
Printer alignment must be done with a raw device or else the -m option must be used to specify a printer.
mentre il secondo
Cannot parse output from printer
Avete esperienza in merito, a questa utility e sapete darmi una mano o se ci sono altri modi per fare queste operazioni?