Pagina 1 di 1

ethtool e velocità 1000

Inviato: ven 28 ott 2011, 16:37
da Meskalamdug
Mi bastano anche i 100...ma vorrei capire perchè pur supportando 1000
non riesco a mandarla a 1000.

sudo ethtool -s eth0 speed 1000 duplex full

sudo ethtool eth0

Codice: Seleziona tutto

sudo ethtool eth0
Settings for eth0:
	Supported ports: [ TP MII ]
	Supported link modes:   10baseT/Half 10baseT/Full 
	                        100baseT/Half 100baseT/Full 
	                        1000baseT/Half 1000baseT/Full 
	Supports auto-negotiation: Yes
	Advertised link modes:  10baseT/Half 10baseT/Full 
	                        100baseT/Half 100baseT/Full 
	                        1000baseT/Half 1000baseT/Full 
	Advertised pause frame use: No
	Advertised auto-negotiation: Yes
	Link partner advertised link modes:  10baseT/Half 10baseT/Full 
	                                     100baseT/Half 100baseT/Full 
	Link partner advertised pause frame use: No
	Link partner advertised auto-negotiation: Yes
	Speed: 100Mb/s
	Duplex: Full
	Port: MII
	PHYAD: 0
	Transceiver: internal
	Auto-negotiation: on
	Supports Wake-on: pumbg
	Wake-on: g
	Current message level: 0x00000033 (51)
			       drv probe ifdown ifup
	Link detected: yes
Come mai da solo 100?
Grazie a chi mi aiuterà

Re: ethtool e velocità 1000

Inviato: ven 28 ott 2011, 16:53
da Ansa89
Probabilmente scrivo una cavolata, ma dovrebbe essere tutto spiegato qui:

Codice: Seleziona tutto

   Supports auto-negotiation: Yes
   Advertised link modes:  10baseT/Half 10baseT/Full
                           100baseT/Half 100baseT/Full
                           1000baseT/Half 1000baseT/Full
   Advertised pause frame use: No
   Advertised auto-negotiation: Yes
   Link partner advertised link modes:  10baseT/Half 10baseT/Full
                                        100baseT/Half 100baseT/Full
   Link partner advertised pause frame use: No
   Link partner advertised auto-negotiation: Yes
   Speed: 100Mb/s
La tua scheda avverte che supporta fino a 1000, ma il partner avverte che supporta fino a 100.
Siccome hai l'auto-negotiation, ti imposta automaticamente 100.

Re: ethtool e velocità 1000

Inviato: ven 28 ott 2011, 17:02
da Meskalamdug
Provo a disabilitare autneg..e non cambia nulla :)

Re: ethtool e velocità 1000

Inviato: ven 28 ott 2011, 17:05
da Ansa89
#-o
Idee finite.

Re: ethtool e velocità 1000

Inviato: ven 28 ott 2011, 18:58
da krisis
Se l'altra scheda supporta max 100 .....

Re: ethtool e velocità 1000

Inviato: ven 28 ott 2011, 20:47
da Meskalamdug
E se è sola? :)

Re: ethtool e velocità 1000

Inviato: sab 29 ott 2011, 14:09
da Meskalamdug
Può essere che sia lo switch del router che me la limita a 100?

Re: ethtool e velocità 1000

Inviato: sab 29 ott 2011, 14:12
da Meskalamdug
Mi sa di si..
dal sito del router "Four 10/100 Mbps Fast Switch Ports
(Auto-Crossover)
"
:|