slacky.eu

Ciao a tutti !!!
<BR>
<BR>Scusate ma ho un problemino che non so come risolvere.
<BR>Ho un pc con ip 10.0.80.1 e una stampante configurata con cups ( e funziona)
<BR>un altro pc con ip 10.0.80.3 in rete con l´altro (rete funzionante)
<BR>
<BR>non riesco a stampare con in pc 10.0.80.3 ( quello senza stampante)
<BR>faccio <a href="http://localhost:631" target="_blank" target="_new">http://localhost:631</a> - configuro stampante - ma alla sezione DEVICE
<BR>non so cosa selezionare e cosa inserire .
<BR>
<BR>device --- app socket / hp jet direct
<BR> internet printing protocoll (http)
<BR> "" " " " " (ipp)
<BR> lpd /lpr host or printer
<BR> ....................ecc
<BR>
<BR> ??????
<BR>
<BR>ecco cosa c´e´ scritto in menage printer
<BR>
<BR> EPSON Stylus Photo 790 - CUPS+Gimp-Print v4.2.6
<BR>
<BR>
<BR>
<BR>
<BR>
<BR>Description: stampatutto
<BR> Location: 10.0.80.1
<BR> Printer State: idle, accepting jobs.
<BR>"Unable to get printer status (client-error-forbidden)!" ????
<BR>Device URI: <a href="http://10.0.80.1:631/" target="_blank" target="_new">http://10.0.80.1:631/</a> ????
<BR>
<BR>
<BR>
<BR> Ogni consiglio e ben accetto ! Grazie<br>

leggiti questa guida e poi ne riparliamo:
<BR>http://www.linuxdesktop.it/modules.php? ... =0&thold=0
<BR> <br>

Metti la stampante come "remote".
<BR>Come tipo di connessione scegli ipp
<BR>e in DEVICE URL inserisci la riga:
<BR>ipp://10.0.80.1:631/printers/nome_stampante.
<BR>Nel primo pc devi autorizzare, modificando
<BR>etc/cups/cupsd.conf e aggiungendo l´IP
<BR>dell´host autorizzato.
<BR>Troverai la sezione del tipo:
<BR>
<BR>##Restrict access to local domain
<BR>Order Deny,Allow
<BR>Deny Fron AllowAllow From 127.0.0.1
<BR>Allow From localhost
<BR>
<BR>aggiungiao una riga contenente l’indirizzo IP
<BR>del secondo pc
<BR>Allow From 10.0.80.1:631.
<BR>
<BR>Riavvia cups.
<BR>
<BR>M.<br>

<BR> Non va ancora ho modificato
<BR>etc/cups/cupsd.conf (sever)
<BR>
<BR>##Restrict access to local domain
<BR>Order Deny,Allow
<BR>Deny Fron AllowAllow From 127.0.0.1
<BR>Allow From localhost
<BR>Allow From 10.0.80.1:631 (ip client)
<BR>
<BR>
<BR>menage printer
<BR>
<BR>EPSON Stylus Photo 790 - CUPS+Gimp-Print v4.2.6
<BR>
<BR>Description: stampatutto
<BR> Location: 10.0.80.1
<BR> Printer State: idle, accepting jobs.
<BR>Device URI: <a href="http://10.0.80.1:631/printers/790epson" target="_blank" target="_new">http://10.0.80.1:631/printers/790epson</a>
<BR>
<BR>
<BR>
<BR>sotto il menage printer dopo aver mandato in stampa una pag di prova
<BR>
<BR>EPSON Stylus Photo 790 - CUPS+Gimp-Print v4.2.6
<BR>
<BR>Description: stampatutto
<BR> Location: 10.0.80.1
<BR> Printer State: processing, accepting jobs.
<BR>"Printing page 0, 8%"
<BR>Device URI: <a href="http://10.0.80.1:631/printers/790epson" target="_blank" target="_new">http://10.0.80.1:631/printers/790epson</a>
<BR>
<BR>
<BR>ECCO COSA appare dopo un po .........................................
<BR>
<BR>EPSON Stylus Photo 790 - CUPS+Gimp-Print v4.2.6
<BR>
<BR>Description: stampatutto
<BR> Location: 10.0.80.1
<BR> Printer State: processing, accepting jobs.
<BR>"Unable to get printer status (client-error-forbidden)!"
<BR>Device URI: <a href="http://10.0.80.1:631/printers/790epson" target="_blank" target="_new">http://10.0.80.1:631/printers/790epson</a>
<BR>
<BR>
<BR>
<BR> il location ho messo ip del SERVER CUPS 10.0.80.1
<BR>790epson e il nome della stampante configurara ne server <br>

# The default value is "IfRequested".
<BR>#
<BR>
<BR><Location />
<BR>Order Deny,Allow
<BR>Deny From All
<BR>Allow From 127.0.0.1
<BR></Location>
<BR>
<BR>#<Location /classes>
<BR>#
<BR># You may wish to limit access to printers and classes, either with Allow
<BR># and Deny lines, or by requiring a username and password.
<BR>#
<BR>#</Location>
<BR>
<BR>#<Location /classes/name>
<BR>#
<BR># You may wish to limit access to printers and classes, either with Allow
<BR># and Deny lines, or by requiring a username and password.
<BR>#
<BR>#</Location>
<BR>
<BR>#<Location /jobs>
<BR>#
<BR># You may wish to limit access to job operations, either with Allow
<BR># and Deny lines, or by requiring a username and password.
<BR>#
<BR>#</Location>
<BR>
<BR>#<Location /printers>
<BR>#
<BR># You may wish to limit access to printers and classes, either with Allow
<BR># and Deny lines, or by requiring a username and password.
<BR>#
<BR>#</Location>
<BR>
<BR>#<Location /printers/name>
<BR>#
<BR># You may wish to limit access to printers and classes, either with Allow
<BR># and Deny lines, or by requiring a username and password.
<BR>#
<BR>
<BR>## Anonymous access (default)
<BR>#AuthType None
<BR>
<BR>## Require a username and password (Basic authentication)
<BR>#AuthType Basic
<BR>#AuthClass User
<BR>
<BR>## Require a username and password (Digest/MD5 authentication)
<BR>#AuthType Digest
<BR>#AuthClass User
<BR>
<BR>## Restrict access to local domain
<BR>#Order Deny,Allow
<BR>#Deny From All
<BR>#Allow From .mydomain.com
<BR>#</Location>
<BR>
<BR><Location /admin>
<BR>#
<BR># You definitely will want to limit access to the administration functions.
<BR># The default configuration requires a local connection from a user who
<BR># is a member of the system group to do any admin tasks. You can change
<BR># the group name using the SystemGroup directive.
<BR>#
<BR>
<BR>AuthType Basic
<BR>AuthClass System
<BR>
<BR>## Restrict access to local domain
<BR>Order Deny,Allow
<BR>Deny From All
<BR>Allow From 127.0.0.1
<BR>
<BR>#Encryption Required
<BR></Location>
<BR>
<BR>#
<BR># End of "$Id: cupsd.conf.in,v 1.17 2005/01/03 19:29:45 mike Exp $".
<BR>#
<BR>
<BR>
<BR>Aggiungi tutti gli Allow
<BR>
<BR>m.<br>