possibili errori ssd al boot.
Inviato: mer 9 dic 2015, 10:47
Con l'hard disk nuovo (849evo ssd) ho questi strani log al boot
che si ripetono cambiando "tag X"
ho fatto short log con smartctl ed ho questo
già difettoso o è altro?
Codice: Seleziona tutto
[ 3.718554] ata1.00: exception Emask 0x0 SAct 0x7fefffff SErr 0x0 action 0x0
[ 3.722141] ata1.00: irq_stat 0x40000001
[ 3.725657] ata1.00: failed command: READ FPDMA QUEUED
[ 3.729159] ata1.00: cmd 60/08:00:70:19:40/00:00:16:00:00/40 tag 0 ncq 4096 in
res 41/04:04:53:16:40/00:00:15:00:00/40 Emask 0x1 (device error)
[ 3.736230] ata1.00: status: { DRDY ERR }
[ 3.739773] ata1.00: error: { ABRT }
[ 3.743313] ata1.00: failed command: READ FPDMA QUEUED
[ 3.746834] ata1.00: cmd 60/08:08:78:19:40/00:00:16:00:00/40 tag 1 ncq 4096 in
res 41/04:04:53:16:40/00:00:15:00:00/40 Emask 0x1 (device error)
[ 3.753884] ata1.00: status: { DRDY ERR }
[ 3.757413] ata1.00: error: { ABRT }
[ 3.760915] ata1.00: failed command: READ FPDMA QUEUED
[ 3.764365] ata1.00: cmd 60/08:10:70:19:40/00:00:16:00:00/40 tag 2 ncq 4096 in
res 41/04:04:53:16:40/00:00:15:00:00/40 Emask 0x1 (device error)
[ 3.771107] ata1.00: status: { DRDY ERR }
[ 3.774498] ata1.00: error: { ABRT }
ho fatto short log con smartctl ed ho questo
Codice: Seleziona tutto
# smartctl -a /dev/sda
smartctl 6.4 2015-06-04 r4109 [x86_64-linux-4.3.0-cf] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Samsung based SSDs
Device Model: Samsung SSD 850 EVO 250GB
Serial Number: S21XX555XX55R
LU WWN Device Id: 5 002538 d23232f98
Firmware Version: EMT01B6Q
User Capacity: 250,059,350,016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Wed Dec 9 10:23:53 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 133) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 128
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 36
177 Wear_Leveling_Count 0x0013 100 100 000 Pre-fail Always - 0
179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0
181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0
182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0
183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0
187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0032 067 055 000 Old_age Always - 33
195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always - 0
199 CRC_Error_Count 0x003e 099 099 000 Old_age Always - 1
235 POR_Recovery_Count 0x0012 099 099 000 Old_age Always - 3
241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 388282956
SMART Error Log Version: 1
No Errors Logged
Warning! SMART Self-Test Log Structure error: invalid SMART checksum.
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 128 -
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
255 0 65535 Read_scanning was never started
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.