Re: Test Disco di sistema di un vecchio netbook
Inviato: gio 8 feb 2018, 20:08
Allora niente. Vuol dire che funziona solo con i modelli elencati nel sito.
Codice: Seleziona tutto
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
No General Purpose Logging support.Codice: Seleziona tutto
smartctl -T permissive -d test /dev/sda ### usalo per capire se puoi passare '-d sat' -o '-d ata', '-d scsi', etc.
smartctl -T permissive -c /dev/sda
smartctl -T permissive -T permissive -c /dev/sda
smartctl -T verypermissive -c /dev/sda
Codice: Seleziona tutto
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
235 Unknown_Attribute 0x0002 001 001 003 Old_age Always FAILING_NOW 0Codice: Seleziona tutto
smartctl -T verypermissive /dev/sda -s on -x -cCodice: Seleziona tutto
smartctl 6.6 2016-05-31 r4324 [i686-linux-4.12.0-1-686-pae] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: P-SSD1800
Serial Number: 0208275064200
Firmware Version: Ver2.Y0C
User Capacity: 8,069,677,056 bytes [8.06 GB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA/ATAPI-5 (minor revision not indicated)
Local Time is: Sat Feb 10 10:31:23 2018 UTC
SMART support is: Unavailable - device lacks SMART capability.
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Unavailable
Write cache is: Unavailable
ATA Security is: Unavailable
Wt Cache Reorder: Unavailable
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
No failed Attributes found.
General SMART Values:
Offline data collection status: (0xff) Offline data collection activity
is in a Vendor Specific state.
Auto Offline Data Collection: Enabled.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
No General Purpose Logging support.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
232 Available_Reservd_Space -O---- 023 023 002 - 23
233 Media_Wearout_Indicator -O---- 100 100 000 - 14600760
234 Unknown_Attribute -O---- 100 100 000 - 5
235 Unknown_Attribute -O---- 001 001 003 NOW 0
9 Power_On_Hours -O---- 216 216 000 - 4055
203 Run_Out_Cancel -O---- 100 100 000 - 5
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
Read SMART Log Directory failed: scsi error badly formed scsi parameters
ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: scsi error badly formed scsi parameters
Read GP Log Directory failed
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
Read SMART Error Log failed: scsi error badly formed scsi parameters
SMART Extended Self-test Log (GP Log 0x07) not supported
Read SMART Self-test Log failed: scsi error badly formed scsi parameters
Selective Self-tests/Logging not supported
SCT Commands not supported
Device Statistics (GP/SMART Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11) not supported
Codice: Seleziona tutto
smartctl 6.6 2016-05-31 r4324 [i686-linux-4.12.0-1-686-pae] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
User Capacity: 8,069,677,056 bytes [8.06 GB]
Logical block size: 512 bytes
LU is fully provisioned
Serial number: 0208275064200
Device type: disk
Local Time is: Sat Feb 10 10:48:28 2018 UTC
SMART support is: Unavailable - device lacks SMART capability.
Read Cache is: Enabled
Writeback Cache is: Disabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
unable to fetch IEC (SMART) mode page [unsupported field in scsi command]
=== START OF READ SMART DATA SECTION ===
Current Drive Temperature: 0 C
Drive Trip Temperature: 0 C
Error Counter logging not supported
[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
Device does not support Self Test logging
Device does not support Background scan results logging
Se non vuoi usare utility come quelle indicate nel link - es. Rufus - e rimanere in ambiente linux puoi provare questa procedura:joe ha scritto:come dovrei fare per crearmi la chiavetta, col necessario per aggiornarlo?
Codice: Seleziona tutto
PROMPT 0
TIMEOUT 900
ONTIMEOUT DOS
DEFAULT DOS
LABEL DOS
COM32 chain.c32
APPEND freedos=/KERNEL.SYSCodice: Seleziona tutto
dd if=/usr/lib/syslinux/bios/mbr.bin bs=440 count=1 of=/dev/sdXCodice: Seleziona tutto
syslinux -f -i -d syslinux /dev/sdX1Sai che sul mio sistema "slackware 14.2 64bit", il pacchetto syslinux non contiene i files:rik70 ha scritto: - copi da /usr/lib/syslinux/bios - o quello che è - i file chain.c32, libcom32.c32, libutil.c32 nella directory syslinux della chiavetta.
Codice: Seleziona tutto
The status of the solid state disk is PERFECT.
Problematic or weak sectors were not found.