Per vedere se è possibile fare qualche cosa. ho acquistato un adattatore usb-sata, questo:
http://www.hamletcom.com/products/xu2sataide.aspx
Ne su slack ne su win resco ad accedere a nessuno dei due dischi, sia quello "buono" che quello rotto. Su slack lsusb da questo risultato:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 0951:1642 Kingston Technology DT101 G2
Bus 002 Device 003: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 004: ID 152d:2338 JMicron Technology Corp. / JMicron USA Technology Corp. JM20337 Hi-Speed USB to SATA & PATA Combo Bridge
a occhio l' ultima riga mi dice che il dispositivo (l' adattatore) viene riconosciuto. Su win con total commander con il plugin per leggere i filesystem linux, mi segnala una partizione raid linux, ma non ci posso accedere, nel senso che se ci clicco, non appare nulla nel pannello destro.
?????????????
Consigli?
PS Dopo aver scritto il post ho provato con dmesg, output:
Codice: Seleziona tutto
151.874312] end_request: I/O error, dev sdd, sector 8
[ 151.874314] Buffer I/O error on device sdd, logical block 1
[ 875.875326] usb 1-1.5: USB disconnect, device number 4
[ 970.587319] usb 1-1.5: new high-speed USB device number 5 using ehci_hcd
[ 970.673726] usb 1-1.5: New USB device found, idVendor=152d, idProduct=2338
[ 970.673731] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[ 970.673736] usb 1-1.5: Product: USB to ATA/ATAPI bridge
[ 970.673740] usb 1-1.5: Manufacturer: JMicron
[ 970.673743] usb 1-1.5: SerialNumber: 000001D919C1
[ 970.674736] scsi14 : usb-storage 1-1.5:1.0
[ 971.716193] scsi 14:0:0:0: Direct-Access WDC WD30 EZRX-00DC0B0 PQ: 0 ANSI: 5
[ 971.717163] sd 14:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16).
[ 971.717487] sd 14:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
[ 971.718321] sd 14:0:0:0: [sdd] Write Protect is off
[ 971.718327] sd 14:0:0:0: [sdd] Mode Sense: 28 00 00 00
[ 971.719318] sd 14:0:0:0: [sdd] No Caching mode page present
[ 971.719323] sd 14:0:0:0: [sdd] Assuming drive cache: write through
[ 971.720178] sd 14:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16).
[ 971.722412] sd 14:0:0:0: [sdd] No Caching mode page present
[ 971.722416] sd 14:0:0:0: [sdd] Assuming drive cache: write through
[ 971.797079] usb 1-1.5: reset high-speed USB device number 5 using ehci_hcd
[ 971.961555] usb 1-1.5: reset high-speed USB device number 5 using ehci_hcd
[ 972.126235] usb 1-1.5: reset high-speed USB device number 5 using ehci_hcd
[ 972.290928] usb 1-1.5: reset high-speed USB device number 5 using ehci_hcd
[ 972.455578] usb 1-1.5: reset high-speed USB device number 5 using ehci_hcd
[ 972.620254] usb 1-1.5: reset high-speed USB device number 5 using ehci_hcd
[ 972.705844] sd 14:0:0:0: [sdd] Unhandled error code
[ 972.705849] sd 14:0:0:0: [sdd] Result: hostbyte=0x07 driverbyte=0x00
[ 972.705854] sd 14:0:0:0: [sdd] CDB: cdb[0]=0x28: 28 00 00 00 00 00 00 00 08 00
[ 972.705866] end_request: I/O error, dev sdd, sector 0
[ 972.705871] Buffer I/O error on device sdd, logical block 0
[ 972.779932] usb 1-1.5: reset high-speed USB device number 5 using ehci_hcd
[ 972.946651] usb 1-1.5: reset high-speed USB device number 5 using ehci_hcd
[ 973.113296] usb 1-1.5: reset high-speed USB device number 5 using ehci_hcd
[ 973.278116] usb 1-1.5: reset high-speed USB device number 5 using ehci_hcd
[ 973.442654] usb 1-1.5: reset high-speed USB device number 5 using ehci_hcd
[ 973.607346] usb 1-1.5: reset high-speed USB device number 5 using ehci_hcd
[ 973.692917] sd 14:0:0:0: [sdd] Unhandled error code
[ 973.692921] sd 14:0:0:0: [sdd] Result: hostbyte=0x07 driverbyte=0x00
[ 973.692926] sd 14:0:0:0: [sdd] CDB: cdb[0]=0x28: 28 00 00 00 00 00 00 00 08 00
[ 973.692937] end_request: I/O error, dev sdd, sector 0
[ 973.692941] Buffer I/O error on device sdd, logical block 0
[ 973.767021] usb 1-1.5: reset high-speed USB device number 5 using ehci_hcd
[ 973.933895] usb 1-1.5: reset high-speed USB device number 5 using ehci_hcd
[ 974.100569] usb 1-1.5: reset high-speed USB device number 5 using ehci_hcd
[ 974.267241] usb 1-1.5: reset high-speed USB device number 5 using ehci_hcd
[ 974.433916] usb 1-1.5: reset high-speed USB device number 5 using ehci_hcd
[ 974.600591] usb 1-1.5: reset high-speed USB device number 5 using ehci_hcd
[ 974.686148] sd 14:0:0:0: [sdd] Unhandled error code
[ 974.686153] sd 14:0:0:0: [sdd] Result: hostbyte=0x07 driverbyte=0x00
[ 974.686159] sd 14:0:0:0: [sdd] CDB: cdb[0]=0x28: 28 00 00 00 00 00 00 00 08 00
[ 974.686171] end_request: I/O error, dev sdd, sector 0
[ 974.686175] Buffer I/O error on device sdd, logical block 0
[ 974.760149] usb 1-1.5: reset high-speed USB device number 5 using ehci_hcd
[ 974.926752] usb 1-1.5: reset high-speed USB device number 5 using ehci_hcd
[ 975.091426] usb 1-1.5: reset high-speed USB device number 5 using ehci_hcd
[ 975.256103] usb 1-1.5: reset high-speed USB device number 5 using ehci_hcd
[ 975.422857] usb 1-1.5: reset high-speed USB device number 5 using ehci_hcd
[ 975.589655] usb 1-1.5: reset high-speed USB device number 5 using ehci_hcd
[ 975.675214] sd 14:0:0:0: [sdd] Unhandled error code
[ 975.675219] sd 14:0:0:0: [sdd] Result: hostbyte=0x07 driverbyte=0x00
[ 975.675224] sd 14:0:0:0: [sdd] CDB: cdb[0]=0x28: 28 00 00 00 00 00 00 00 08 00
[ 975.675236] end_request: I/O error, dev sdd, sector 0
[ 975.675241] Buffer I/O error on device sdd, logical block 0
[ 975.749343] usb 1-1.5: reset high-speed USB device number 5 using ehci_hcd
[ 975.915018] usb 1-1.5: reset high-speed USB device number 5 using ehci_hcd
[ 976.081692] usb 1-1.5: reset high-speed USB device number 5 using ehci_hcd
[ 976.248366] usb 1-1.5: reset high-speed USB device number 5 using ehci_hcd
[ 976.415040] usb 1-1.5: reset high-speed USB device number 5 using ehci_hcd
[ 976.580715] usb 1-1.5: reset high-speed USB device number 5 using ehci_hcd
[ 976.666093] sd 14:0:0:0: [sdd] Unhandled error code
[ 976.666098] sd 14:0:0:0: [sdd] Result: hostbyte=0x07 driverbyte=0x00
[ 976.666103] sd 14:0:0:0: [sdd] CDB: cdb[0]=0x28: 28 00 00 00 00 00 00 00 08 00
[ 976.666115] end_request: I/O error, dev sdd, sector 0
[ 976.666119] Buffer I/O error on device sdd, logical block 0
[ 976.740400] usb 1-1.5: reset high-speed USB device number 5 using ehci_hcd
Questa è solo la parte finale, perchè il tutto è lungo una quaresima....
COMUNQUE SEMBRA CI SIA UN PROBLEMA....MA QUALE?
PPSS fdisk mi dice:
fdisk /dev/sdd
Welcome to fdisk (util-linux 2.21.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
WARNING: GPT (GUID Partition Table) detected on '/dev/sdd'! The util fdisk doesn't support GPT. Use GNU Parted.
fdisk: unable to read /dev/sdd: Errore di input/output
??????
Gparted
mentre legge le partizioni mi dice che cè un errore di I/O in dev/sdd, poi gli dico ignora, e il dispositivo dev/sdd è nella lista, ma lo spazio risulta non allocato e vicino alla scritta "non allocato" c'è il segnale col punto escalamativo.