slacky.eu

Codice: Seleziona tutto

#!/bin/sh
# $Id: openbox.SlackBuild,v 1.3 2009/09/15 11:42:34 root Exp root $
# Copyright (c) 2008-2009  Eric Hameleers, Eindhoven, NL
# All rights reserved.
#
#   Permission to use, copy, modify, and distribute this software for
#   any purpose with or without fee is hereby granted, provided that
#   the above copyright notice and this permission notice appear in all
#   copies.
#
#   THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
#   WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
#   MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
#   IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
#   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
#   USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
#   ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
#   OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
#   OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
#   SUCH DAMAGE.
# -----------------------------------------------------------------------------
#
# Slackware SlackBuild script 
# ===========================
# By:         Eric Hameleers <alien@slackware.com>
# For:        openbox
# Descr:      a highly configurable, lighweight window manager
# URL:        http://icculus.org/openbox/
# Needs:      
# Changelog:  
# 3.4.7.2-1:  04/Jun/2008 by Eric Hameleers <alien@slackware.com>
#             * Initial build.
# 
# Run 'sh openbox.SlackBuild' to build a Slackware package.
# The package (.tgz) plus descriptive .txt file are created in /tmp .
# Install using 'installpkg'. 
#
# -----------------------------------------------------------------------------

# Set initial variables:

PRGNAM=openbox
VERSION=${VERSION:-3.4.9}
ARCH=${ARCH:-x86_64}
BUILD=${BUILD:-1}
TAG=${TAG:-alien}

DOCS="ABOUT-NLS AUTHORS CHANGELOG COMPLIANCE COPYING README"

# Where do we look for sources?
SRCDIR=$(cd $(dirname $0); pwd)

# Place to build (TMP) package (PKG) and output (OUTPUT) the program:
TMP=${TMP:-/tmp/build}
PKG=$TMP/package-$PRGNAM
OUTPUT=${OUTPUT:-/tmp}

SOURCE="$SRCDIR/${PRGNAM}-${VERSION}.tar.gz"
SRCURL="http://icculus.org/${PRGNAM}/releases/${PRGNAM}-${VERSION}.tar.gz"

##
## --- with a little luck, you won't have to edit below this point --- ##
##

# Exit the script on errors:
set -e
trap 'echo "$0 FAILED at line ${LINENO}" | tee $OUTPUT/error-${PRGNAM}.log' ERR
# Catch unitialized variables:
set -u
P1=${1:-1}

case "$ARCH" in
  i486)      SLKCFLAGS="-O2 -march=i486 -mtune=i686"
             SLKLDFLAGS=""; LIBDIRSUFFIX=""
             ;;
  s390)      SLKCFLAGS="-O2"
             SLKLDFLAGS=""; LIBDIRSUFFIX=""
             ;;
  powerpc)   SLKCFLAGS="-O2"
             SLKLDFLAGS=""; LIBDIRSUFFIX=""
             ;;
  x86_64)    SLKCFLAGS="-O2 -fPIC"
             SLKLDFLAGS="-L/usr/lib64"; LIBDIRSUFFIX="64"
             ;;
esac

# Create working directories:
mkdir -p $OUTPUT          # place for the package to be saved
mkdir -p $TMP/tmp-$PRGNAM # location to build the source
mkdir -p $PKG             # place for the package to be built
rm -rf $PKG/*             # always erase old package's contents
rm -rf $TMP/tmp-$PRGNAM/* # remove the remnants of previous build

# Source file availability:
if ! [ -f ${SOURCE} ]; then
  if ! [ "x${SRCURL}" == "x" ]; then
    # Check if the $SRCDIR is writable at all - if not, download to $OUTPUT
    [ -w "$SRCDIR" ] || SOURCE="$OUTPUT/$(basename $SOURCE)"
    echo "Source '$(basename ${SOURCE})' not available yet..."
    echo "Will download file to $(dirname $SOURCE)"
    wget -nv -T 20 -O "${SOURCE}" "${SRCURL}" || true
    if [ $? -ne 0 -o ! -s "${SOURCE}" ]; then
      echo "Downloading '$(basename ${SOURCE})' failed... aborting the build."
      mv -f "${SOURCE}" "${SOURCE}".FAIL
      exit 1
    fi
  else
    echo "File '$(basename ${SOURCE})' not available... aborting the build."
    exit 1
  fi
fi

if [ "$P1" == "--download" ]; then
  echo "Download complete."
  exit 0
fi

# --- PACKAGE BUILDING ---

echo "++"
echo "|| $PRGNAM-$VERSION"
echo "++"

# Explode the package framework:
if [ -f $SRCDIR/_$PRGNAM.tar.gz ]; then
  cd $PKG
  explodepkg $SRCDIR/_$PRGNAM.tar.gz
  cd -
fi

cd $TMP/tmp-$PRGNAM
echo "Extracting the source archive(s) for $PRGNAM..."
tar -xvf ${SOURCE}
cd ${PRGNAM}-${VERSION}
chown -R root:root .
chmod -R u+w,go+r-w,a-s .

echo Building ...
LDFLAGS="$SLKLDFLAGS" \
CXXFLAGS="$SLKCFLAGS" \
CFLAGS="$SLKCFLAGS" \
./configure \
  --prefix=/usr \
  --libdir=/usr/lib${LIBDIRSUFFIX} \
  --localstatedir=/var \
  --sysconfdir=/etc \
  --mandir=/usr/man \
  --docdir=/usr/doc/$PRGNAM-$VERSION \
  --disable-static \
  --enable-startup-notification \
  --enable-xcursor \
  --enable-session-management \
  --program-prefix= \
  --program-suffix= \
  --build=$ARCH-slackware-linux \
  2>&1 | tee $OUTPUT/configure-${PRGNAM}.log
make 2>&1 | tee $OUTPUT/make-${PRGNAM}.log

# Install all the needed stuff to the package dir
# Use installwatch if available, to produce a logfile of the installation
# process that is more easily readable:
if $(which installwatch > /dev/null 2>&1); then
  installwatch -o $OUTPUT/install-${PRGNAM}.log make DESTDIR=$PKG install
else
  make DESTDIR=$PKG install 2>&1 |tee $OUTPUT/install-${PRGNAM}.log
fi

# Add an xinitrc file to be used by xwmconfig:
mkdir -p $PKG/etc/X11/xinit
install -m 0755 -o root $SRCDIR/xinitrc.$PRGNAM \
  $PKG/etc/X11/xinit/xinitrc.$PRGNAM

# Make sure that KDM picks up the LXDE session type as well:
mkdir -p $PKG/usr/share/apps/kdm/sessions
( cd $PKG/usr/share/apps/kdm/sessions
  for i in $(ls ../../../xsessions/*.desktop) ; do ln -sf $i ; done
)

# Add this to the doinst.sh:
! [ -d $PKG/install ] && mkdir -p $PKG/install
cat <<EOINS >> $PKG/install/doinst.sh
# Handle the incoming configuration files:
config() {
  for infile in \$1; do
    NEW="\$infile"
    OLD="\`dirname \$NEW\`/\`basename \$NEW .new\`"
    # If there's no config file by that name, mv it over:
    if [ ! -r \$OLD ]; then
      mv \$NEW \$OLD
    elif [ "\`cat \$OLD | md5sum\`" = "\`cat \$NEW | md5sum\`" ]; then
      # toss the redundant copy
      rm \$NEW
    fi
    # Otherwise, we leave the .new copy for the admin to consider...
  done
}

# An example of how you handle your '.new' config files:
#config etc/openbox.conf.new

EOINS

# Add documentation:
mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
cp -a $DOCS $PKG/usr/doc/$PRGNAM-$VERSION || true
cat $SRCDIR/$(basename $0) | sed \
  -e "/^VERSION=/s/:-.*}/:-$VERSION}/" \
  -e "/^ARCH=/s/:-.*}/:-$ARCH}/" \
  -e "/^BUILD=/s/:-.*}/:-$BUILD}/" \
  > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
chown -R root:root $PKG/usr/doc/$PRGNAM-$VERSION
find $PKG/usr/doc -type f -exec chmod 644 {} \;

# Compress the man page(s):
if [ -d $PKG/usr/man ]; then
  find $PKG/usr/man -type f -name "*.?" -exec gzip -9f {} \;
  for i in $(find $PKG/usr/man -type l -name "*.?") ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
fi

# Strip binaries:
find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true

# Add a package description:
mkdir -p $PKG/install
cat $SRCDIR/slack-desc.$PRGNAM > $PKG/install/slack-desc

# Build the package:
cd $PKG
makepkg --linkadd y --chown n $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.tgz 2>&1 | tee $OUTPUT/makepkg-${PRGNAM}.log
cd $OUTPUT
md5sum ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.tgz > ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.tgz.md5
cd -
cat $PKG/install/slack-desc | grep "^${PRGNAM}" > $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.txt

Codice: Seleziona tutto

#!/bin/sh

# Slackware build script for OpenOffice.org

# Copyright 2006-2009  Robby Workman, Northport, Alabama, ASA
# All rights reserved.
#
# Redistribution and use of this script, with or without modification, is
# permitted provided that the following conditions are met:
#
# 1. Redistributions of this script must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
#
#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

# Thanks to Sandman1, Larhzu, and MacIver for early assistance.
# Thanks to Fred Emmott (http://slamd64.com) for some better code in a few
#   places and ideas to include the Optimization Solver and disable javaldx.
# Thanks to hba for the idea to include support for other languages.
# Thanks to Nille Akerstrom for the diff to support w/JRE tarballs
# Thanks to ivo@linvo.org for hints on installing extensions
# Thsnks to necropresto for better x86_64 support

PRGNAM=openoffice.org
VERSION=3.1.1
ARCH=${ARCH:-x86_64}
BUILD=${BUILD:-1}
TAG=${TAG:-_SBo}

CWD=$(pwd)
TMP=${TMP:-/tmp/SBo}
PKG=$TMP/package-$PRGNAM
OUTPUT=${OUTPUT:-/tmp}

# This should allow you to either pass a different value of OOLANG when you
# run the script (OOLANG=pt-BR ./openoffice.org.SlackBuild for example) or
# change it in this script.  Note that you will need to have the correct
# tarball in the build directory for this to work...
# You can get localized tarballs from the following location:
# ftp://ftp.free.fr/mirrors/ftp.openoffice.org/localized/$OOLANG/$VERSION/
# Thanks to Niki Kovacs for finding this :-)
OOLANG=${OOLANG:-en-US}
PKG_LANG=$(echo $OOLANG | sed s/-/_/)	# Leave this alone
# Some localized versions only ship with a bundled JRE, and we'd like this
# script to work on those as well...
WJRE=${WJRE:-no}

# If you want to disable java support by removing executable permissions
# form OOo's java loader (this will not affect other apps), set this
# variable to "YES"   Default is "NO"
DISABLE_JAVA=${DISABLE_JAVA:-NO}

# Change source package name
if [ "$ARCH" = "x86_64" ]; then
  SRCARCH="X86-64"
  PKGARCH="$ARCH"
  WJRE=yes #Overwrite WJRE option since the only x86_64 I see has jre
else
  SRCARCH="Intel"
  PKGARCH="i586"
fi

# Yes, I know there is a Slackware integration file in the desktop-integration
# directory, but it's worthless to us.  I'd prefer to do things correctly.

# Ignore this - it's just to get the toplevel directory name of the 
# extracted tarball archive
if [ $WJRE != no ]; then
  SOURCEDIR=$(tar tzf $CWD/OOo_${VERSION}_Linux${SRCARCH}_install_wJRE_${OOLANG}.tar.gz | head -1 | tr -d \/)
else
  SOURCEDIR=$(tar tzf $CWD/OOo_${VERSION}_Linux${SRCARCH}_install_${OOLANG}.tar.gz | head -1 | tr -d \/)
fi
# If the above operation failed for some reason, unset SOURCEDIR so that
# the "set -eu" below will cause us to bail out with an error
[ -z $SOURCEDIR ] && unset SOURCEDIR
  
set -eu

rm -rf $PKG
mkdir -p $TMP $PKG $OUTPUT
rm -rf $TMP/$SOURCEDIR

# Handle the tarballs that include a bundled JRE
if [ $WJRE != no ]; then
  tar xvf $CWD/OOo_${VERSION}_Linux${SRCARCH}_install_wJRE_${OOLANG}.tar.gz -C $TMP
  rm -rf $TMP/$SOURCEDIR/{JavaSetup.jar,installdata,setup}
  rm -rf $TMP/$SOURCEDIR/RPMS/{userland,jre-*-linux-*.rpm}
else
  tar xvf $CWD/OOo_${VERSION}_Linux${SRCARCH}_install_${OOLANG}.tar.gz -C $TMP
fi

cd $TMP/$SOURCEDIR/RPMS/
mv desktop-integration/openoffice.org3.1-freedesktop-menus-3.1-9420.noarch.rpm .
rm *onlineupdate*.rpm # We don't want this
for FILE in *.rpm ; do rpm2cpio < $FILE | cpio -imdv ; done
rm -rf desktop-integration *.rpm
mv opt usr $PKG
cd $PKG

# Kill a broken symlink
rm -f $PKG/usr/share/applications/openoffice.org3-startcenter.desktop

# Create symlinks in /usr/bin to actual binaries
cd $PKG/usr/bin
  for FILE in \
    sbase scalc sdraw simpress smath soffice spadmin swriter unopkg ; do 
      rm -f $FILE
      ln -sf ../../opt/openoffice.org3/program/$FILE $FILE ;
  done 
cd -

# Remove DejaVu and Liberation fonts - these are included in other packages
rm -f opt/openoffice.org/basis3.1/share/fonts/truetype/[DL]*.ttf

# Fix Exec commands in the desktop files
# See http://bugzilla.xfce.org/show_bug.cgi?id=2430 
cd $PKG//opt/openoffice.org3/share/xdg/
  for APP in base calc draw impress math writer; do
    sed -i 's%Exec=openoffice.org3 -%Exec=s%' $APP.desktop ;
  done
cd -

# Install extensions
UNOPKG_BIN=$PKG/opt/openoffice.org3/program/unopkg
DICT_DIR=$PKG/opt/openoffice.org3/share/extension/install
if [ -x "$UNOPKG_BIN" ]; then
  UNOPKG_TMP=$TMP/$$$$$$
  find $DICT_DIR -type f -name "*.oxt" \
    -exec $UNOPKG_BIN add --shared {} \
    "-env:UserInstallation=file:///$UNOPKG_TMP" \;
  rm -rf $UNOPKG_TMP 	# Clean up after ourselves
fi

# Move docs to their expected locations
mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
cd $PKG/opt/openoffice.org3
  mv README* *LICENSE* readmes licenses $PKG/usr/doc/$PRGNAM-$VERSION
cd -
cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild

# Disable Java support if desired (see above)
if [ "$DISABLE_JAVA" = "YES" ]; then
  chmod -x $PKG/opt/openoffice.org/ure/bin/javaldx
fi

mkdir -p $PKG/install
cat $CWD/slack-desc > $PKG/install/slack-desc
cat $CWD/doinst.sh > $PKG/install/doinst.sh

# Fix ownership and permissions and make the package
chown -R root:root .
find . -type d -exec chmod 755 {} \;
chmod -R u+rw,go+r-w,a-s .
/sbin/makepkg -c n -l y $OUTPUT/$PRGNAM-${VERSION}_${PKG_LANG}-$PKGARCH-$BUILD$TAG.${PKGTYPE:-tgz}