Kernel config.
Inviato: dom 17 gen 2010, 14:32
Ciao a tutti, avevo avuto dei problemi con gli effetti 3d ricompilando il kernel(kernel zen: v2.6.32-zen5), allora ho pensato che siccome con il kernel generico funzionavano, di configurare il config del generico per renderlo piu performante, l'ho configurato e compilato ma ecco che non parte Xorg, nè con kdm, ne con startx, non parte, rimane una schermata tutta nera.
Inoltre dopo udev all'avvio mi dà dei strani uotput, ora posto un pò di tutto:
dmesg:
QUello che riporta dopo l'avvio di udev:
lsmod:
Ho riguardato la configurazione ma a me sembra tutto ok!
Vi allego anche il config del kernel se magari vi può essere d'aiuto per aiutarmi
Grazie in anticipo per gli aiuti!
CIao Ciao!
Inoltre dopo udev all'avvio mi dà dei strani uotput, ora posto un pò di tutto:
dmesg:
Codice: Seleziona tutto
Linux version 2.6.32-zen5-lupass7-06649-g632131e (root@archiso) (gcc version 4.4.2 20091208 (prerelease) (GCC) ) #1 ZEN SMP PREEMPT Sun Jan 17 13:58:53 CET 2010
Command line: root=/dev/sda3 ro
KERNEL supported cpus:
Intel GenuineIntel
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000004ffc0000 (usable)
BIOS-e820: 000000004ffc0000 - 000000004ffce000 (ACPI data)
BIOS-e820: 000000004ffce000 - 000000004fff0000 (ACPI NVS)
BIOS-e820: 000000004fff0000 - 0000000050000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
last_pfn = 0x4ffc0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-DFFFF uncachable
E0000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FC0000000 write-back
1 base 040000000 mask FF0000000 write-back
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-000000004ffc0000
0000000000 - 004fe00000 page 2M
004fe00000 - 004ffc0000 page 4k
kernel direct mapping tables up to 4ffc0000 @ 8000-c000
ACPI: RSDP 00000000000fac00 00014 (v00 ACPIAM)
ACPI: RSDT 000000004ffc0000 00034 (v01 A M I OEMRSDT 09000508 MSFT 00000097)
ACPI: FACP 000000004ffc0200 00084 (v02 A M I OEMFACP 09000508 MSFT 00000097)
ACPI: DSDT 000000004ffc0440 049BB (v01 A0214 A0214001 00000001 INTL 02002026)
ACPI: FACS 000000004ffce000 00040
ACPI: APIC 000000004ffc0390 00068 (v01 A M I OEMAPIC 09000508 MSFT 00000097)
ACPI: MCFG 000000004ffc0400 0003C (v01 A M I OEMMCFG 09000508 MSFT 00000097)
ACPI: OEMB 000000004ffce040 00046 (v01 A M I AMI_OEM 09000508 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
(5 early reservations) ==> bootmem [0000000000 - 004ffc0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 000141db98] TEXT DATA BSS ==> [0001000000 - 000141db98]
#3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#4 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ffffea0000000000-ffffea00011fffff] PMD -> [ffff880001a00000-ffff880002bfffff] on node 0
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x0004ffc0
On node 0 totalpages: 327519
DMA zone: 56 pages used for memmap
DMA zone: 101 pages reserved
DMA zone: 3842 pages, LIFO batch:0
DMA32 zone: 4424 pages used for memmap
DMA32 zone: 319096 pages, LIFO batch:31
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 48
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 50000000:aec00000)
NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 24 pages/cpu @ffff880001600000 s68888 r8192 d21224 u1048576
pcpu-alloc: s68888 r8192 d21224 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 322938
Kernel command line: root=/dev/sda3 ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Initializing CPU#0
Memory: 1283284k/1310464k available (2361k kernel code, 388k absent, 26068k reserved, 865k data, 292k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:320
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration failed
TSC: Unable to calibrate against PIT
TSC: No reference (HPET/PMTIMER) available
Marking TSC unstable due to could not calculate TSC khz
Calibrating delay loop... 3948.54 BogoMIPS (lpj=1974272)
Security Framework initialized
Mount-cache hash table entries: 256
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 4 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay loop... 1998.84 BogoMIPS (lpj=999424)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU1: Thermal monitoring enabled (TM1)
CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
Brought up 2 CPUs
Total of 2 processors activated (5947.39 BogoMIPS).
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 10 32bit mmio pref: [0xf0000000-0xf7ffffff]
pci 0000:00:01.0: supports D1
pci 0000:00:0d.0: reg 10 32bit mmio: [0xfebc0000-0xfebdffff]
pci 0000:00:0d.0: reg 18 io port: [0xdc00-0xdc3f]
pci 0000:00:0d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0d.0: PME# disabled
pci 0000:00:0f.0: reg 10 io port: [0xec00-0xec07]
pci 0000:00:0f.0: reg 14 io port: [0xe880-0xe883]
pci 0000:00:0f.0: reg 18 io port: [0xe800-0xe807]
pci 0000:00:0f.0: reg 1c io port: [0xe480-0xe483]
pci 0000:00:0f.0: reg 20 io port: [0xe400-0xe40f]
pci 0000:00:0f.0: reg 24 io port: [0xe000-0xe0ff]
pci 0000:00:0f.1: reg 20 io port: [0xfc00-0xfc0f]
pci 0000:00:10.0: reg 20 io port: [0xd880-0xd89f]
pci 0000:00:10.0: supports D1 D2
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: PME# disabled
pci 0000:00:10.1: reg 20 io port: [0xd800-0xd81f]
pci 0000:00:10.1: supports D1 D2
pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.1: PME# disabled
pci 0000:00:10.2: reg 20 io port: [0xd480-0xd49f]
pci 0000:00:10.2: supports D1 D2
pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.2: PME# disabled
pci 0000:00:10.3: reg 20 io port: [0xd400-0xd41f]
pci 0000:00:10.3: supports D1 D2
pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.3: PME# disabled
pci 0000:00:10.4: reg 10 32bit mmio: [0xfebfb800-0xfebfb8ff]
pci 0000:00:10.4: supports D1 D2
pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.4: PME# disabled
pci 0000:00:11.5: reg 10 io port: [0xd000-0xd0ff]
pci 0000:00:11.5: supports D1 D2
pci 0000:01:00.0: reg 10 32bit mmio pref: [0xd0000000-0xd7ffffff]
pci 0000:01:00.0: reg 14 io port: [0xc800-0xc8ff]
pci 0000:01:00.0: reg 18 32bit mmio: [0xfeaf0000-0xfeafffff]
pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfeac0000-0xfeadffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: reg 10 32bit mmio pref: [0xc8000000-0xcfffffff]
pci 0000:01:00.1: reg 14 32bit mmio: [0xfeae0000-0xfeaeffff]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: bridge io port: [0xc000-0xcfff]
pci 0000:00:01.0: bridge 32bit mmio: [0xfea00000-0xfeafffff]
pci 0000:00:01.0: bridge 32bit mmio pref: [0xbff00000-0xdfefffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI Warning: Incorrect checksum in table [OEMB] - E8, should be DA (20090903/tbutils-314)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
Switching to clocksource jiffies
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:07: ioport range 0x290-0x297 has been reserved
system 00:08: ioport range 0x3e0-0x3e7 has been reserved
system 00:08: ioport range 0x4d0-0x4d1 has been reserved
system 00:08: ioport range 0x800-0x87f has been reserved
system 00:08: ioport range 0x400-0x41f has been reserved
system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0c: iomem range 0x0-0x9ffff could not be reserved
system 00:0c: iomem range 0xc0000-0xcffff has been reserved
system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
system 00:0c: iomem range 0x100000-0x4fffffff could not be reserved
system 00:0c: iomem range 0xfff80000-0xffffffff has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0xc000-0xcfff
pci 0000:00:01.0: MEM window: 0xfea00000-0xfeafffff
pci 0000:00:01.0: PREFETCH window: 0xbff00000-0xdfefffff
pci 0000:00:01.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
pci_bus 0000:01: resource 1 mem: [0xfea00000-0xfeafffff]
pci_bus 0000:01: resource 2 pref mem [0xbff00000-0xdfefffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 2507
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler bfq registered (default)
Linux agpgart interface v0.103
sata_via 0000:00:0f.0: version 2.4
sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
sata_via 0000:00:0f.0: routed to hard irq line 10
scsi0 : sata_via
scsi1 : sata_via
ata1: SATA max UDMA/133 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 20
ata2: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 20
pata_via 0000:00:0f.1: version 0.3.4
pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
scsi2 : pata_via
scsi3 : pata_via
ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
TCP cubic registered
NET: Registered protocol family 17
registered taskstats version 1
ata3.00: ATA-7: Maxtor 6E040L0, NAR61EA0, max UDMA/133
ata3.00: 80293248 sectors, multi 16: LBA
ata3.00: limited to UDMA/33 due to 40-wire cable
ata3.00: configured for UDMA/33
ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
scsi 2:0:0:0: Direct-Access ATA Maxtor 6E040L0 NAR6 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 80293248 512-byte logical blocks: (41.1 GB/38.2 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 2:0:0:0: [sda] Attached SCSI disk
ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL10, max UDMA/33
ata4.00: configured for UDMA/33
scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL10 PQ: 0 ANSI: 5
EXT2-fs: sda3: couldn't mount because of unsupported optional features (240).
EXT4-fs (sda3): mounted filesystem with ordered data mode
VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
Freeing unused kernel memory: 292k freed
BFS CPU scheduler v0.313 by Con Kolivas.
Driver 'rtc_cmos' needs updating - please use bus_type methods
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram
udev: starting version 146
Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
Copyright (c) 1999-2006 Intel Corporation.
e1000 0000:00:0d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
e1000: 0000:00:0d.0: e1000_probe: (PCI:33MHz:32-bit) 00:13:d4:f0:71:cf
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
uhci_hcd: USB Universal Host Controller Interface driver
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d880
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d800
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d480
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.3: irq 21, io base 0x0000d400
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
usb 1-2: new full speed USB device using uhci_hcd and address 2
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
usb 1-2: configuration #1 chosen from 1 choice
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 5 ports detected
codec_read: codec 0 is not valid [0xfe0000]
codec_read: codec 0 is not valid [0xfe0000]
codec_read: codec 0 is not valid [0xfe0000]
codec_read: codec 0 is not valid [0xfe0000]
usb 1-2.1: new low speed USB device using uhci_hcd and address 3
[drm] Initialized drm 1.1.0 20060810
usb 1-2.1: configuration #1 chosen from 1 choice
usb 1-2.3: new low speed USB device using uhci_hcd and address 4
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[drm] radeon: Initializing kernel modesetting.
[drm] register mmio base: 0xFEAF0000
[drm] register mmio size: 65536
[drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[drm] Generation 2 PCI interface, using max accessible memory
BUG: unable to handle kernel NULL pointer dereference at 0000000000000074
IP: [<ffffffffa01a8f17>] 0xffffffffa01a8f17
PGD 4c013067 PUD 4d470067 PMD 0
Oops: 0000 [#1] PREEMPT SMP
last sysfs file: /sys/module/snd_seq_oss/initstate
CPU 1
Modules linked in: radeon(+) ttm snd_seq_oss(+) snd_seq_midi_event snd_seq drm_kms_helper drm i2c_algo_bit i2c_core snd_pcm_oss snd_mixer_oss evdev processor thermal fan thermal_sys snd_via82xx uhci_hcd button snd_ac97_codec ac97_bus usbcore snd_pcm snd_timer snd_page_alloc battery snd_mpu401_uart snd_rawmidi snd_seq_device snd soundcore sr_mod cdrom e1000 ac rtc_cmos rtc_core rtc_lib
Pid: 1570, comm: modprobe Not tainted 2.6.32-zen5-lupass7-06649-g632131e #1
RIP: 0010:[<ffffffffa01a8f17>] [<ffffffffa01a8f17>] 0xffffffffa01a8f17
RSP: 0018:ffff88004ef83c58 EFLAGS: 00010292
RAX: 0000000000000000 RBX: ffff88004ed3b000 RCX: ffffffff81386be0
RDX: 0000000007ffffff RSI: ffff88004f91e800 RDI: ffff88004ef68800
RBP: ffff88004ef68800 R08: 00000000ffffffff R09: 00000000ffffffff
R10: 0000000000000000 R11: 0000000000000000 R12: ffff88004f91e800
R13: 0000000000000008 R14: ffffffffa01fe040 R15: ffff88004ef68b80
FS: 00007f33a3d49700(0000) GS:ffff880001700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000074 CR3: 000000004e071000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process modprobe (pid: 1570, threadinfo ffff88004ef82000, task ffff88004cecbe90)
Stack:
ffffffff00000008 ffff88004ef83cb8 ffff88004ef83c78 ffff88004ed3b000
<0> ffff88004ef68800 0000000000004000 ffffc900008a0000 0000000000004e20
<0> 0000000000000001 ffff88004ed3b000 ffff88004ef68800 ffff88004f91e800
Call Trace:
[<ffffffffa01c1ee5>] ? 0xffffffffa01c1ee5
[<ffffffffa01c8753>] ? 0xffffffffa01c8753
[<ffffffffa01a6305>] ? 0xffffffffa01a6305
[<ffffffffa01a6bc0>] ? 0xffffffffa01a6bc0
[<ffffffffa0144697>] ? 0xffffffffa0144697
[<ffffffff81143ed8>] ? 0xffffffff81143ed8
[<ffffffff81144836>] ? 0xffffffff81144836
[<ffffffff811a6ae5>] ? 0xffffffff811a6ae5
[<ffffffff811a6bc7>] ? 0xffffffff811a6bc7
[<ffffffff811a6d05>] ? 0xffffffff811a6d05
[<ffffffff811a6c8f>] ? 0xffffffff811a6c8f
[<ffffffff811a6488>] ? 0xffffffff811a6488
[<ffffffff811a5de7>] ? 0xffffffff811a5de7
[<ffffffff811a6f40>] ? 0xffffffff811a6f40
[<ffffffff81144a92>] ? 0xffffffff81144a92
[<ffffffffa0209000>] ? 0xffffffffa0209000
[<ffffffff81009027>] ? 0xffffffff81009027
[<ffffffff81050f11>] ? 0xffffffff81050f11
[<ffffffff8100b06b>] ? 0xffffffff8100b06b
Code: 74 85 c0 75 05 48 83 c4 08 c3 48 83 c4 08 e9 70 c6 f9 ff 41 55 41 54 55 53 48 83 ec 48 48 89 fb 48 8b 7f 08 48 8b 87 08 03 00 00 <8b> 50 74 85 d2 75 13 e8 d9 c5 f9 ff 89 c5 85 c0 0f 85 18 02 00
RIP [<ffffffffa01a8f17>] 0xffffffffa01a8f17
RSP <ffff88004ef83c58>
CR2: 0000000000000074
---[ end trace 7666bf4d7fe20518 ]---
usbcore: registered new interface driver hiddev
input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.1/1-2.1:1.0/input/input3
generic-usb 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:10.0-2.1/input0
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
usb 1-2.3: configuration #1 chosen from 1 choice
input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.3/1-2.3:1.0/input/input4
generic-usb 0003:04F2:0403.0002: input,hidraw1: USB HID v1.11 Keyboard [Chicony USB Keyboard] on usb-0000:00:10.0-2.3/input0
input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.3/1-2.3:1.1/input/input5
generic-usb 0003:04F2:0403.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Chicony USB Keyboard] on usb-0000:00:10.0-2.3/input1
Adding 987988k swap on /dev/sda2. Priority:-1 extents:1 across:987988k
e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX Codice: Seleziona tutto
usbcore: registered new interface driver hiddev
input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.1/1-2.1:1.0/input/input3
generic-usb 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:10.0-2.1/input0
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
usb 1-2.3: configuration #1 chosen from 1 choice
input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.3/1-2.3:1.0/input/input4
generic-usb 0003:04F2:0403.0002: input,hidraw1: USB HID v1.11 Keyboard [Chicony USB Keyboard] on usb-0000:00:10.0-2.3/input0
input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.3/1-2.3:1.1/input/input5
generic-usb 0003:04F2:0403.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Chicony USB Keyboard] on usb-0000:00:10.0-2.3/input1
Adding 987988k swap on /dev/sda2. Priority:-1 extents:1 across:987988k
e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
Codice: Seleziona tutto
Module Size Used by
usbhid 31552 0
hid 69376 1 usbhid
snd_seq_dummy 996 0
snd_seq_oss 19872 0
snd_seq_midi_event 3680 1 snd_seq_oss
snd_seq 34016 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
radeon 492128 1
ttm 27632 1 radeon
drm_kms_helper 19200 1 radeon
drm 113408 3 radeon,ttm,drm_kms_helper
i2c_algo_bit 4132 1 radeon
i2c_core 13448 3 radeon,drm,i2c_algo_bit
snd_pcm_oss 29504 0
snd_mixer_oss 11424 1 snd_pcm_oss
evdev 6624 0
thermal 9696 0
processor 19348 0
fan 2016 0
thermal_sys 9728 3 thermal,processor,fan
button 3720 0
snd_via82xx 15588 0
snd_ac97_codec 90424 1 snd_via82xx
ac97_bus 768 1 snd_ac97_codec
snd_pcm 45096 3 snd_pcm_oss,snd_via82xx,snd_ac97_codec
snd_timer 13872 2 snd_seq,snd_pcm
uhci_hcd 17280 0
snd_page_alloc 5200 2 snd_via82xx,snd_pcm
battery 4128 0
usbcore 100044 2 usbhid,uhci_hcd
snd_mpu401_uart 3776 1 snd_via82xx
snd_rawmidi 13184 1 snd_mpu401_uart
snd_seq_device 3636 4 snd_seq_dummy,snd_seq_oss,snd_seq,snd_rawmidi
snd 37192 11 snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 4416 1 snd
e1000 84996 0
sr_mod 10500 0
cdrom 29864 1 sr_mod
ac 1664 0
rtc_cmos 6748 0
rtc_core 10532 1 rtc_cmos
rtc_lib 1728 1 rtc_core
Vi allego anche il config del kernel se magari vi può essere d'aiuto per aiutarmi
Grazie in anticipo per gli aiuti!
CIao Ciao!
