Pagina 1 di 1

networkmanager problema di connessione dopo aggiornamento

Inviato: mer 14 mag 2014, 10:12
da sircello
Salve, dopo l'aggiornameto a slackware 64 current Kernel 3.10.30 non funziona più la connessione internet tramite chiavetta Huawei Technologies Co., Ltd. E398 LTE/UMTS/GSM Modem/Networkcard , con la precedente versione kernel 3.2.8 funzionava correttamente , nell'app di networkmanager la chiavetta non viene vista.Chi mi Può aiutare grazie..
allego output lusb,demsg

Codice: Seleziona tutto

Bus 001 Device 003: ID 12d1:1506 Huawei Technologies Co., Ltd. Modem/Networkcard
Bus 002 Device 002: ID 058f:9360 Alcor Micro Corp. 8-in-1 Media Card Reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Codice: Seleziona tutto

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.30 (root@hive64) (gcc version 4.8.2 (GCC) ) #2 SMP Fri Feb 14 19:46:22 CST 2014
[    0.000000] Command line: BOOT_IMAGE=Slackware-14-1C ro root=803 vt.default_utf8=0
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffeffff] usable
[    0.000000] BIOS-e820: [mem 0x000000003fff0000-0x000000003fff2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003fff3000-0x000000003fffffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000d0000000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.3 present.
[    0.000000] DMI:    /NF-CK804, BIOS F2 05/02/2005
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x3fff0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FFC0000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [mem 0x000f53a0-0x000f53af] mapped at [ffff8800000f53a0]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x0236d000, 0x0236dfff] PGTABLE
[    0.000000] BRK [0x0236e000, 0x0236efff] PGTABLE
[    0.000000] BRK [0x0236f000, 0x0236ffff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x3fc00000-0x3fdfffff]
[    0.000000]  [mem 0x3fc00000-0x3fdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x3c000000-0x3fbfffff]
[    0.000000]  [mem 0x3c000000-0x3fbfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x3bffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x3fe00000-0x3ffeffff]
[    0.000000]  [mem 0x3fe00000-0x3ffeffff] page 4k
[    0.000000] BRK [0x02370000, 0x02370fff] PGTABLE
[    0.000000] ACPI: RSDP 00000000000f6dc0 00014 (v00 Nvidia)
[    0.000000] ACPI: RSDT 000000003fff3000 00030 (v01 Nvidia AWRDACPI 42302E31 AWRD 01010101)
[    0.000000] ACPI: FACP 000000003fff3040 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 01010101)
[    0.000000] ACPI: DSDT 000000003fff30c0 04ACE (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000C)
[    0.000000] ACPI: FACS 000000003fff0000 00040
[    0.000000] ACPI: MCFG 000000003fff7c40 0003C (v01 Nvidia AWRDACPI 42302E31 AWRD 01010101)
[    0.000000] ACPI: APIC 000000003fff7bc0 0006E (v01 Nvidia AWRDACPI 42302E31 AWRD 01010101)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000]  [ffffea0000000000-ffffea0000ffffff] PMD -> [ffff88003e600000-ffff88003f5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x3ffeffff]
[    0.000000] On node 0 totalpages: 262030
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 4032 pages used for memmap
[    0.000000]   DMA32 zone: 258032 pages, LIFO batch:31
[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: BIOS IRQ0 override ignored.
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] e820: [mem 0x40000000-0xcfffffff] available for PCI devices
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88003fc00000 s79360 r8192 d23040 u2097152
[    0.000000] pcpu-alloc: s79360 r8192 d23040 u2097152 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257913
[    0.000000] Kernel command line: BOOT_IMAGE=Slackware-14-1C ro root=803 vt.default_utf8=0
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ 3424000000 size 32 MB
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] Memory: 1009840k/1048512k available (11728k kernel code, 392k absent, 38280k reserved, 5706k data, 1268k init)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=1.
[    0.000000] NR_IRQS:8448 nr_irqs:256 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1809.218 MHz processor
[    0.002003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3618.43 BogoMIPS (lpj=1809218)
[    0.002194] pid_max: default: 32768 minimum: 301
[    0.002330] Security Framework initialized
[    0.002437] Mount-cache hash table entries: 256
[    0.002803] Initializing cgroup subsys devices
[    0.002899] Initializing cgroup subsys freezer
[    0.003004] Initializing cgroup subsys net_cls
[    0.003099] Initializing cgroup subsys blkio
[    0.003193] Initializing cgroup subsys perf_event
[    0.003315] tseg: 0000000000
[    0.003323] mce: CPU supports 5 MCE banks
[    0.003427] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.003427] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.003427] tlb_flushall_shift: 4
[    0.013068] Freeing SMP alternatives: 36k freed
[    0.013179] ACPI: Core revision 20130328
[    0.016466] ACPI: All ACPI Tables successfully acquired
[    0.017010] ftrace: allocating 36389 entries in 143 pages
[    0.032439] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[    0.042609] smpboot: CPU0: AMD Athlon(tm) 64 Processor 3000+ (fam: 0f, model: 1f, stepping: 00)
[    0.043000] Performance Events: AMD PMU driver.
[    0.043000] ... version:                0
[    0.043000] ... bit width:              48
[    0.043000] ... generic registers:      4
[    0.043000] ... value mask:             0000ffffffffffff
[    0.043000] ... max period:             00007fffffffffff
[    0.043000] ... fixed-purpose events:   0
[    0.043000] ... event mask:             000000000000000f
[    0.043048] MCE: In-kernel MCE decoding enabled.
[    0.043144] Brought up 1 CPUs
[    0.043237] smpboot: Total of 1 processors activated (3618.43 BogoMIPS)
[    0.043812] devtmpfs: initialized
[    0.045748] PM: Registering ACPI NVS region [mem 0x3fff0000-0x3fff2fff] (12288 bytes)
[    0.046255] xor: measuring software checksum speed
[    0.056002]    prefetch64-sse:  5648.000 MB/sec
[    0.066002]    generic_sse:  5644.000 MB/sec
[    0.066096] xor: using function: prefetch64-sse (5648.000 MB/sec)
[    0.066196] atomic64 test passed for x86-64 platform with CX8 and with SSE
[    0.066371] regulator-dummy: no parameters
[    0.066532] NET: Registered protocol family 16
[    0.066741] node 0 link 0: io port [1000, fffff]
[    0.066745] TOM: 0000000040000000 aka 1024M
[    0.066840] node 0 link 0: mmio [d0000000, dfffffff]
[    0.066844] node 0 link 0: mmio [a0000, bffff]
[    0.066846] node 0 link 0: mmio [40000000, ffb7ffff]
[    0.066848] TOM2: 0000000000000000 aka 0M
[    0.066943] bus: [bus 00-ff] on node 0 link 0
[    0.066945] bus: 00 [io  0x0000-0xffff]
[    0.066947] bus: 00 [mem 0x40000000-0xfcffffffff]
[    0.066949] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.066988] ACPI: bus type PCI registered
[    0.067004] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.067173] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xd0000000-0xdfffffff] (base 0xd0000000)
[    0.067338] PCI: MMCONFIG at [mem 0xd0000000-0xdfffffff] reserved in E820
[    0.078555] PCI: Using configuration type 1 for base access
[    0.083147] bio: create slab <bio-0> at 0
[    0.100038] raid6: sse2x1     816 MB/s
[    0.117048] raid6: sse2x2    1031 MB/s
[    0.134031] raid6: sse2x4    1582 MB/s
[    0.134125] raid6: using algorithm sse2x4 (1582 MB/s)
[    0.134220] raid6: using intx1 recovery algorithm
[    0.134366] ACPI: Added _OSI(Module Device)
[    0.134461] ACPI: Added _OSI(Processor Device)
[    0.134555] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.134650] ACPI: Added _OSI(Processor Aggregator Device)
[    0.135555] ACPI: EC: Look up EC in DSDT
[    0.136440] ACPI: Actual Package length (6) is larger than NumElements field (2), truncated
[    0.139322] ACPI: Interpreter enabled
[    0.139427] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
[    0.139640] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130328/hwxface-568)
[    0.139860] ACPI: (supports S0 S1 S4 S5)
[    0.139954] ACPI: Using IOAPIC for interrupt routing
[    0.140029] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.140305] ACPI: No dock devices found.
[    0.148090] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.148273] acpi PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.148276] acpi PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.148279] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.148282] acpi PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[    0.148285] acpi PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)
[    0.148288] PCI: root bus 00: hardware-probed resources
[    0.148501] PCI host bridge to bus 0000:00
[    0.148597] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.148693] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.148790] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfcffffffff]
[    0.148888] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.148998] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
[    0.149186] pci 0000:00:01.0: [10de:0050] type 00 class 0x060100
[    0.149208] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.149426] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
[    0.149435] pci 0000:00:01.1: reg 10: [io  0xa000-0xa01f]
[    0.149448] pci 0000:00:01.1: reg 20: [io  0x1c00-0x1c3f]
[    0.149453] pci 0000:00:01.1: reg 24: [io  0x1c40-0x1c7f]
[    0.149469] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.149605] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
[    0.149613] pci 0000:00:02.0: reg 10: [mem 0xf3103000-0xf3103fff]
[    0.149640] pci 0000:00:02.0: supports D1 D2
[    0.149643] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.149743] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.149881] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
[    0.149890] pci 0000:00:02.1: reg 10: [mem 0xf3105000-0xf31050ff]
[    0.149922] pci 0000:00:02.1: supports D1 D2
[    0.149925] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.150040] pci 0000:00:02.1: System wakeup disabled by ACPI
[    0.150180] pci 0000:00:04.0: [10de:0059] type 00 class 0x040100
[    0.150188] pci 0000:00:04.0: reg 10: [io  0xac00-0xacff]
[    0.150193] pci 0000:00:04.0: reg 14: [io  0xb000-0xb0ff]
[    0.150199] pci 0000:00:04.0: reg 18: [mem 0xf3106000-0xf3106fff]
[    0.150221] pci 0000:00:04.0: supports D1 D2
[    0.150342] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
[    0.150359] pci 0000:00:06.0: reg 20: [io  0xf000-0xf00f]
[    0.150498] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
[    0.150506] pci 0000:00:07.0: reg 10: [io  0x09f0-0x09f7]
[    0.150511] pci 0000:00:07.0: reg 14: [io  0x0bf0-0x0bf3]
[    0.150516] pci 0000:00:07.0: reg 18: [io  0x0970-0x0977]
[    0.150521] pci 0000:00:07.0: reg 1c: [io  0x0b70-0x0b73]
[    0.150526] pci 0000:00:07.0: reg 20: [io  0xcc00-0xcc0f]
[    0.150532] pci 0000:00:07.0: reg 24: [mem 0xf3101000-0xf3101fff]
[    0.150668] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
[    0.150677] pci 0000:00:08.0: reg 10: [io  0x09e0-0x09e7]
[    0.150682] pci 0000:00:08.0: reg 14: [io  0x0be0-0x0be3]
[    0.150687] pci 0000:00:08.0: reg 18: [io  0x0960-0x0967]
[    0.150692] pci 0000:00:08.0: reg 1c: [io  0x0b60-0x0b63]
[    0.150697] pci 0000:00:08.0: reg 20: [io  0xe000-0xe00f]
[    0.150702] pci 0000:00:08.0: reg 24: [mem 0xf3102000-0xf3102fff]
[    0.150837] pci 0000:00:09.0: [10de:005c] type 01 class 0x060401
[    0.150942] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.151040] pci 0000:00:0a.0: [10de:0057] type 00 class 0x068000
[    0.151049] pci 0000:00:0a.0: reg 10: [mem 0xf3104000-0xf3104fff]
[    0.151054] pci 0000:00:0a.0: reg 14: [io  0xe400-0xe407]
[    0.151079] pci 0000:00:0a.0: supports D1 D2
[    0.151081] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.151178] pci 0000:00:0a.0: System wakeup disabled by ACPI
[    0.151323] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
[    0.151351] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.151450] pci 0000:00:0b.0: System wakeup disabled by ACPI
[    0.151585] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
[    0.151612] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.151711] pci 0000:00:0c.0: System wakeup disabled by ACPI
[    0.151846] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
[    0.151874] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.152019] pci 0000:00:0d.0: System wakeup disabled by ACPI
[    0.152154] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
[    0.152180] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.152278] pci 0000:00:0e.0: System wakeup disabled by ACPI
[    0.152417] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[    0.152548] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[    0.152676] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[    0.152803] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[    0.152967] pci 0000:01:07.0: [1814:0201] type 00 class 0x028000
[    0.152980] pci 0000:01:07.0: reg 10: [mem 0xf3004000-0xf3005fff]
[    0.153067] pci 0000:01:0a.0: [104c:8025] type 00 class 0x0c0010
[    0.153079] pci 0000:01:0a.0: reg 10: [mem 0xf3006000-0xf30067ff]
[    0.153087] pci 0000:01:0a.0: reg 14: [mem 0xf3000000-0xf3003fff]
[    0.153129] pci 0000:01:0a.0: supports D1 D2
[    0.153132] pci 0000:01:0a.0: PME# supported from D0 D1 D2 D3hot
[    0.153185] pci 0000:00:09.0: PCI bridge to [bus 01] (subtractive decode)
[    0.153285] pci 0000:00:09.0:   bridge window [mem 0xf3000000-0xf30fffff]
[    0.153289] pci 0000:00:09.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.153291] pci 0000:00:09.0:   bridge window [mem 0x40000000-0xfcffffffff] (subtractive decode)
[    0.153294] pci 0000:00:09.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.153330] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    0.153427] pci 0000:00:0b.0:   bridge window [io  0x9000-0x9fff]
[    0.153465] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.153562] pci 0000:00:0c.0:   bridge window [io  0x8000-0x8fff]
[    0.153597] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    0.153694] pci 0000:00:0d.0:   bridge window [io  0x7000-0x7fff]
[    0.153737] pci 0000:05:00.0: [10de:0161] type 00 class 0x030000
[    0.153747] pci 0000:05:00.0: reg 10: [mem 0xf0000000-0xf0ffffff]
[    0.153756] pci 0000:05:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.153765] pci 0000:05:00.0: reg 1c: [mem 0xf1000000-0xf1ffffff 64bit]
[    0.153775] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.153831] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.154004] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    0.154102] pci 0000:00:0e.0:   bridge window [mem 0xf0000000-0xf2ffffff]
[    0.154106] pci 0000:00:0e.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.154116] pci_bus 0000:00: on NUMA node 0
[    0.154121] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.154284] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.154604] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.155150] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.155697] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[    0.156062] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[    0.157061] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.157606] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[    0.158042] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.158588] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[    0.159025] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[    0.159458] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.160007] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[    0.160447] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[    0.160880] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.161432] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[    0.161876] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[    0.162327] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.162900] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[    0.163197] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[    0.163491] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
[    0.163761] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
[    0.164006] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[    0.164284] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[    0.164630] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[    0.165003] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[    0.165349] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
[    0.165694] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[    0.166068] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[    0.166414] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[    0.166759] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[    0.167098] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[    0.167451] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[    0.167803] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[    0.168741] acpi root: \_SB_.PCI0 notify handler is installed
[    0.168783] Found 1 acpi root devices
[    0.168893] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.169002] vgaarb: loaded
[    0.169094] vgaarb: bridge control possible 0000:05:00.0
[    0.169280] SCSI subsystem initialized
[    0.169374] ACPI: bus type ATA registered
[    0.169533] libata version 3.00 loaded.
[    0.169539] ACPI: bus type USB registered
[    0.169663] usbcore: registered new interface driver usbfs
[    0.169770] usbcore: registered new interface driver hub
[    0.169892] usbcore: registered new device driver usb
[    0.170092] PCI: Using ACPI for IRQ routing
[    0.175311] PCI: pci_cache_line_size set to 64 bytes
[    0.175346] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.175349] e820: reserve RAM buffer [mem 0x3fff0000-0x3fffffff]
[    0.175533] Switching to clocksource refined-jiffies
[    0.183448] pnp: PnP ACPI init
[    0.183564] ACPI: bus type PNP registered
[    0.183797] system 00:00: [io  0x1000-0x107f] has been reserved
[    0.183894] system 00:00: [io  0x1080-0x10ff] has been reserved
[    0.183992] system 00:00: [io  0x1400-0x147f] has been reserved
[    0.184003] system 00:00: [io  0x1480-0x14ff] has been reserved
[    0.184100] system 00:00: [io  0x1800-0x187f] has been reserved
[    0.184197] system 00:00: [io  0x1880-0x18ff] has been reserved
[    0.184296] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.185085] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.185183] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.185279] system 00:01: [io  0x0295-0x0314] has been reserved
[    0.185376] system 00:01: [io  0x0294-0x0297] could not be reserved
[    0.185474] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.185490] pnp 00:02: [dma 4]
[    0.185516] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.185561] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.185590] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.185627] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.185782] pnp 00:06: [dma 2]
[    0.185821] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.186098] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.186441] pnp 00:08: Plug and Play ACPI device, IDs PNP0510 (active)
[    0.186717] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.186858] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.186916] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.186984] system 00:0c: [mem 0xd0000000-0xdfffffff] has been reserved
[    0.187003] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.187174] system 00:0d: [mem 0x000d5800-0x000d7fff] has been reserved
[    0.187273] system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.187372] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.187470] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.187568] system 00:0d: [mem 0x3fff0000-0x3fffffff] could not be reserved
[    0.187667] system 00:0d: [mem 0xffff0000-0xffffffff] has been reserved
[    0.187765] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.187864] system 00:0d: [mem 0x00100000-0x3ffeffff] could not be reserved
[    0.188002] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.188101] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.188200] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.188208] pnp: PnP ACPI: found 14 devices
[    0.188301] ACPI: bus type PNP unregistered
[    0.194627] Switching to clocksource acpi_pm
[    0.194759] pci 0000:00:09.0: PCI bridge to [bus 01]
[    0.194857] pci 0000:00:09.0:   bridge window [mem 0xf3000000-0xf30fffff]
[    0.194957] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    0.194957] pci 0000:00:0b.0:   bridge window [io  0x9000-0x9fff]
[    0.194957] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.194957] pci 0000:00:0c.0:   bridge window [io  0x8000-0x8fff]
[    0.194957] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    0.194957] pci 0000:00:0d.0:   bridge window [io  0x7000-0x7fff]
[    0.194957] pci 0000:05:00.0: BAR 6: assigned [mem 0xf2000000-0xf201ffff pref]
[    0.194995] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    0.195100] pci 0000:00:0e.0:   bridge window [mem 0xf0000000-0xf2ffffff]
[    0.195199] pci 0000:00:0e.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.195371] pci 0000:00:09.0: setting latency timer to 64
[    0.195380] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.195383] pci_bus 0000:00: resource 5 [mem 0x40000000-0xfcffffffff]
[    0.195385] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.195389] pci_bus 0000:01: resource 1 [mem 0xf3000000-0xf30fffff]
[    0.195391] pci_bus 0000:01: resource 4 [io  0x0000-0xffff]
[    0.195394] pci_bus 0000:01: resource 5 [mem 0x40000000-0xfcffffffff]
[    0.195397] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[    0.195400] pci_bus 0000:02: resource 0 [io  0x9000-0x9fff]
[    0.195403] pci_bus 0000:03: resource 0 [io  0x8000-0x8fff]
[    0.195406] pci_bus 0000:04: resource 0 [io  0x7000-0x7fff]
[    0.195409] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf2ffffff]
[    0.195412] pci_bus 0000:05: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.195458] NET: Registered protocol family 2
[    0.195757] TCP established hash table entries: 8192 (order: 5, 131072 bytes)
[    0.195936] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[    0.196119] TCP: Hash tables configured (established 8192 bind 8192)
[    0.196287] TCP: reno registered
[    0.196381] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.196486] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.196671] NET: Registered protocol family 1
[    0.196878] RPC: Registered named UNIX socket transport module.
[    0.196974] RPC: Registered udp transport module.
[    0.197081] RPC: Registered tcp transport module.
[    0.197175] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.197581] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[    0.259312] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[    0.259555] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.259655] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[    0.259756] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.259853] pci 0000:00:0b.0: Linking AER extended capability
[    0.259981] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.260092] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[    0.260193] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.260289] pci 0000:00:0c.0: Linking AER extended capability
[    0.260420] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.260519] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[    0.260620] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.260717] pci 0000:00:0d.0: Linking AER extended capability
[    0.260851] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.260950] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[    0.261061] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.261157] pci 0000:00:0e.0: Linking AER extended capability
[    0.261271] pci 0000:05:00.0: Boot video device
[    0.261275] PCI: CLS 32 bytes, default 64
[    0.261991] audit: initializing netlink socket (disabled)
[    0.262119] type=2000 audit(1400438174.262:1): initialized
[    0.264342] VFS: Disk quotas dquot_6.5.2
[    0.264505] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.265425] NFS: Registering the id_resolver key type
[    0.265535] Key type id_resolver registered
[    0.265629] Key type id_legacy registered
[    0.265725] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.265922] NTFS driver 2.1.30 [Flags: R/W].
[    0.266103] ROMFS MTD (C) 2007 Red Hat, Inc.
[    0.266314] JFS: nTxBlock = 7889, nTxLock = 63117
[    0.269730] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[    0.270362] OCFS2 1.5.0
[    0.270572] ocfs2: Registered cluster interface o2cb
[    0.270667] OCFS2 DLMFS 1.5.0
[    0.270823] OCFS2 User DLM kernel interface loaded
[    0.270917] OCFS2 Node Manager 1.5.0
[    0.271177] OCFS2 DLM 1.5.0
[    0.271471] bio: create slab <bio-1> at 1
[    0.271722] Btrfs loaded
[    0.271824] msgmni has been set to 1972
[    0.272922] async_tx: api initialized (async)
[    0.273093] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.273290] io scheduler noop registered
[    0.273384] io scheduler deadline registered
[    0.273484] io scheduler cfq registered (default)
[    0.273682] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[    0.273736] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[    0.273779] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[    0.273821] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[    0.273895] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.274117] GHES: HEST is not enabled!
[    0.275646] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.296208] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.560099] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.562130] brd: module loaded
[    0.562228] Compaq SMART2 Driver (v 2.6.0)
[    0.562355] HP CISS Driver (v 3.6.26)
[    0.562793] Floppy drive(s): fd0 is 1.44M
[    0.564156] fnic: Cisco FCoE HBA Driver, ver 1.5.0.22
[    0.564313] fnic: Successfully Initialized Trace Buffer
[    0.564657] Adaptec aacraid driver 1.2-0[30200]-ms
[    0.564800] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[    0.565021] scsi: <fdomain> Detection failed (no card)
[    0.565140] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.05.00.03-k.
[    0.565318] Emulex LightPulse Fibre Channel SCSI driver 8.3.39
[    0.565414] Copyright(c) 2004-2009 Emulex.  All rights reserved.
[    0.565569] Brocade BFA FC/FCOE SCSI driver - version: 3.1.2.1
[    0.565737] DC390: clustering now enabled by default. If you get problems load
[    0.565899]        with "disable_clustering=1" and report to maintainers
[    0.566020] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[    0.566206] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[    0.566317] megasas: 06.506.00.00-rc1 Sat. Feb. 9 17:00:00 PDT 2013
[    0.566437] mpt2sas version 14.100.00.00 loaded
[    0.566586] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[    0.566714] 3ware Storage Controller device driver for Linux v1.26.02.003.
[    0.566827] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[    0.567012] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[    0.567187] ipr: IBM Power RAID SCSI Device Driver version: 2.6.0 (November 16, 2012)
[    0.567366] RocketRAID 3xxx/4xxx Controller driver v1.8
[    0.568976] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
[    0.569146] st: Version 20101219, fixed bufsize 32768, s/g segs 256
[    0.569457] sata_nv 0000:00:07.0: version 3.5
[    0.569779] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
[    0.569939] sata_nv 0000:00:07.0: setting latency timer to 64
[    0.570213] scsi0 : sata_nv
[    0.570405] scsi1 : sata_nv
[    0.570559] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xcc00 irq 21
[    0.570657] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xcc08 irq 21
[    0.571030] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
[    0.571170] sata_nv 0000:00:08.0: setting latency timer to 64
[    0.571427] scsi2 : sata_nv
[    0.571603] scsi3 : sata_nv
[    0.571756] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xe000 irq 20
[    0.571854] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xe008 irq 20
[    0.572116] pata_amd 0000:00:06.0: version 0.4.1
[    0.572152] pata_amd 0000:00:06.0: setting latency timer to 64
[    0.572460] scsi4 : pata_amd
[    0.572824] scsi5 : pata_amd
[    0.573140] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    0.573238] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    0.573994] I2O subsystem v1.325
[    0.574101] i2o: max drivers = 8
[    0.574284] I2O Configuration OSM v1.323
[    0.574385] I2O Bus Adapter OSM v1.317
[    0.574482] I2O Block Device OSM v1.325
[    0.574736] I2O SCSI Peripheral OSM v1.316
[    0.574834] I2O ProcFS OSM v1.316
[    0.574940] Fusion MPT base driver 3.04.20
[    0.575044] Copyright (c) 1999-2008 LSI Corporation
[    0.575142] Fusion MPT SPI Host driver 3.04.20
[    0.575254] Fusion MPT FC Host driver 3.04.20
[    0.575373] Fusion MPT SAS Host driver 3.04.20
[    0.575491] Fusion MPT misc device (ioctl) driver 3.04.20
[    0.575632] mptctl: Registered with Fusion MPT base driver
[    0.575727] mptctl: /dev/mptctl @ (major,minor=10,220)
[    0.575822] Fusion MPT LAN driver 3.04.20
[    0.576028] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.579203] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.579302] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.579514] mousedev: PS/2 mouse device common for all mice
[    0.579665] rtc_cmos 00:03: RTC can wake from S4
[    0.579889] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.580027] rtc_cmos 00:03: alarms up to one year, y3k, 242 bytes nvram
[    0.581525] FDC 0 is a post-1991 82077
[    0.581645] md: linear personality registered for level -1
[    0.581741] md: raid0 personality registered for level 0
[    0.581835] md: raid1 personality registered for level 1
[    0.581930] md: raid10 personality registered for level 10
[    0.582036] md: raid6 personality registered for level 6
[    0.582131] md: raid5 personality registered for level 5
[    0.582486] md: raid4 personality registered for level 4
[    0.582582] md: multipath personality registered for level -4
[    0.582935] device-mapper: uevent: version 1.0.3
[    0.583118] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[    0.583335] cpuidle: using governor ladder
[    0.583429] cpuidle: using governor menu
[    0.583598] input: Speakup as /devices/virtual/input/input0
[    0.583751] initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
[    0.583873] speakup 3.1.6: initialized
[    0.583968] synth name on entry is: (null)
[    0.584209] TCP: cubic registered
[    0.584303] Initializing XFRM netlink socket
[    0.584401] NET: Registered protocol family 17
[    0.584530] Key type dns_resolver registered
[    0.602458] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    0.744268] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-4163B, A103, max UDMA/33
[    0.744374] ata5: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
[    0.766186] ata5.00: configured for UDMA/33
[    0.874021] ata1: SATA link down (SStatus 0 SControl 300)
[    0.875018] ata3: SATA link down (SStatus 0 SControl 300)
[    1.264024] tsc: Refined TSC clocksource calibration: 1809.271 MHz
[    1.264125] Switching to clocksource tsc
[    1.328013] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.344961] ata2.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
[    1.345064] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.348220] ata2.00: configured for UDMA/133
[    1.348450] scsi 1:0:0:0: Direct-Access     ATA      WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5
[    1.348820] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.349047] sd 1:0:0:0: [sda] Write Protect is off
[    1.349145] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.349169] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.388251]  sda: sda1 sda2 sda3 sda4
[    1.388644] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.803014] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.807518] ata4.00: HPA detected: current 398294975, native 398297088
[    1.807619] ata4.00: ATA-7: Maxtor 6L200S0, BANC1G10, max UDMA/133
[    1.807717] ata4.00: 398294975 sectors, multi 16: LBA48 NCQ (not used)
[    1.814028] ata4.00: configured for UDMA/133
[    1.814230] scsi 3:0:0:0: Direct-Access     ATA      Maxtor 6L200S0   BANC PQ: 0 ANSI: 5
[    1.814663] sd 3:0:0:0: [sdb] 398294975 512-byte logical blocks: (203 GB/189 GiB)
[    1.814876] sd 3:0:0:0: [sdb] Write Protect is off
[    1.814973] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.814996] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.819104] scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4163B A103 PQ: 0 ANSI: 5
[    1.825341] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.825506] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.825698] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    1.839992]  sdb: sdb1
[    1.840273] sd 3:0:0:0: [sdb] Attached SCSI disk
[    1.986882] registered taskstats version 1
[    1.987436] md: Waiting for all devices to be available before autodetect
[    1.987536] md: If you don't use raid, use raid=noautodetect
[    1.987786] md: Autodetecting RAID arrays.
[    1.987881] md: Scanned 0 and added 0 devices.
[    1.987977] md: autorun ...
[    1.988081] md: ... autorun DONE.
[    2.016014] EXT3-fs (sda3): error: couldn't mount because of unsupported optional features (240)
[    2.016326] EXT2-fs (sda3): error: couldn't mount because of unsupported optional features (240)
[    2.062232] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    2.062423] VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
[    2.102014] devtmpfs: mounted
[    2.103944] Freeing unused kernel memory: 1268k freed
[    2.104753] Write protecting the kernel read-only data: 16384k
[    2.106866] Freeing unused kernel memory: 548k freed
[    2.109966] Freeing unused kernel memory: 792k freed
[    2.807674] loop: module loaded
[    2.928402] udevd[156]: starting version 182
[    3.553868] microcode: AMD CPU family 0xf not supported
[    3.593580] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.596226] ehci-pci: EHCI PCI platform driver
[    3.596503] ehci-pci 0000:00:02.1: setting latency timer to 64
[    3.596515] ehci-pci 0000:00:02.1: EHCI Host Controller
[    3.597491] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    3.597670] ehci-pci 0000:00:02.1: debug port 1
[    3.597783] ehci-pci 0000:00:02.1: cache line size of 32 is not supported
[    3.597807] ehci-pci 0000:00:02.1: irq 22, io mem 0xf3105000
[    3.603021] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    3.603159] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.603259] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.603424] usb usb1: Product: EHCI Host Controller
[    3.603521] usb usb1: Manufacturer: Linux 3.10.30 ehci_hcd
[    3.603619] usb usb1: SerialNumber: 0000:00:02.1
[    3.603943] hub 1-0:1.0: USB hub found
[    3.604055] hub 1-0:1.0: 10 ports detected
[    3.613550] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    3.613725] ACPI: Power Button [PWRB]
[    3.613909] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    3.614099] ACPI: Power Button [PWRF]
[    3.678879] cfg80211: Calling CRDA to update world regulatory domain
[    3.681485] parport_pc 00:09: reported by Plug and Play ACPI
[    3.681628] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    3.744625] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[    3.762615] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.762915] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    3.762919] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    3.763598] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    3.763796] ohci_hcd 0000:00:02.0: irq 23, io mem 0xf3103000
[    3.791448] ppdev: user-space parallel port driver
[    3.797054] firewire_ohci 0000:01:0a.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[    3.809839] powernow-k8: fid 0xa (1800 MHz), vid 0x6
[    3.809943] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[    3.810086] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ (1 cpu cores) (version 2.20.00)
[    3.816035] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    3.816137] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.816301] usb usb2: Product: OHCI Host Controller
[    3.816397] usb usb2: Manufacturer: Linux 3.10.30 ohci_hcd
[    3.816494] usb usb2: SerialNumber: 0000:00:02.0
[    3.816867] hub 2-0:1.0: USB hub found
[    3.816969] hub 2-0:1.0: 10 ports detected
[    3.817346] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    3.817799] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[    3.817901] forcedeth 0000:00:0a.0: setting latency timer to 64
[    4.080504] Linux agpgart interface v0.103
[    4.118813] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[    4.119017] [drm] Initialized drm 1.1.0 20060810
[    4.130193] ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2560, rf: 0003, rev: 0004
[    4.130876] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    4.158019] usb 1-8: new high-speed USB device number 3 using ehci-pci
[    4.209662] wmi: Mapper loaded
[    4.273928] usb 1-8: New USB device found, idVendor=12d1, idProduct=1506
[    4.274044] usb 1-8: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[    4.274144] usb 1-8: Product: HUAWEI Mobile
[    4.274240] usb 1-8: Manufacturer: HUAWEI
[    4.298120] firewire_core 0000:01:0a.0: created device fw0: GUID 000fea5600c2c38b, S800
[    4.339713] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x3f1 @ 7, addr 00:0f:ea:c7:dd:56
[    4.339887] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
[    4.340315] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[    4.340435] i2c i2c-1: nForce2 SMBus adapter at 0x1c40
[    4.340985] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[    4.341126] snd_intel8x0 0000:00:04.0: setting latency timer to 64
[    4.382796] cfg80211: World regulatory domain updated:
[    4.382901] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    4.383075] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    4.383239] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    4.383403] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    4.383567] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    4.383731] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    4.403825] nouveau  [  DEVICE][0000:05:00.0] BOOT0  : 0x044100a2
[    4.403930] nouveau  [  DEVICE][0000:05:00.0] Chipset: NV44 (NV44)
[    4.404042] nouveau  [  DEVICE][0000:05:00.0] Family : NV40
[    4.404897] nouveau  [   VBIOS][0000:05:00.0] checking PRAMIN for image...
[    4.481698] nouveau  [   VBIOS][0000:05:00.0] ... appears to be valid
[    4.481797] nouveau  [   VBIOS][0000:05:00.0] using image from PRAMIN
[    4.482124] nouveau  [   VBIOS][0000:05:00.0] BIT signature found
[    4.482225] nouveau  [   VBIOS][0000:05:00.0] version 05.44.02.11.00
[    4.482704] nouveau  [     PFB][0000:05:00.0] RAM type: DDR1
[    4.482787] nouveau  [     PFB][0000:05:00.0] RAM size: 64 MiB
[    4.482869] nouveau  [     PFB][0000:05:00.0]    ZCOMP: 0 tags
[    4.502955] i2c /dev entries driver
[    4.516708] nouveau  [  PTHERM][0000:05:00.0] FAN control: none / external
[    4.516808] nouveau  [  PTHERM][0000:05:00.0] fan management: disabled
[    4.516893] nouveau  [  PTHERM][0000:05:00.0] internal sensor: no
[    4.537580] [TTM] Zone  kernel: Available graphics memory: 506242 kiB
[    4.537666] [TTM] Initializing pool allocator
[    4.537749] [TTM] Initializing DMA pool allocator
[    4.538021] nouveau  [     DRM] VRAM: 60 MiB
[    4.538109] nouveau  [     DRM] GART: 512 MiB
[    4.538192] nouveau  [     DRM] TMDS table version 1.1
[    4.538273] nouveau  [     DRM] DCB version 3.0
[    4.538354] nouveau  [     DRM] DCB outp 00: 01000300 00000028
[    4.538437] nouveau  [     DRM] DCB outp 01: 02010310 00000028
[    4.538519] nouveau  [     DRM] DCB outp 02: 01010312 00000000
[    4.538601] nouveau  [     DRM] DCB outp 03: 020203f1 0080c033
[    4.538876] nouveau  [     DRM] Saving VGA fonts
[    4.595814] usb 2-1: new full-speed USB device number 2 using ohci_hcd
[    4.598702] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    4.598791] [drm] No driver support for vblank timestamp query.
[    4.598942] nouveau  [     DRM] 0xD134: Parsing digital output script table
[    4.650033] nouveau  [     DRM] 1 available performance level(s)
[    4.650116] nouveau  [     DRM] 0:
[    4.650196] nouveau  [     DRM] c: core 199MHz memory 399MHz
[    4.651842] nouveau  [     DRM] MM: using M2MF for buffer copies
[    4.651933] nouveau  [     DRM] Setting dpms mode 3 on TV encoder (output 3)
[    4.732330] nouveau  [     DRM] allocated 1920x1080 fb: 0x9000, bo ffff88003a35dc00
[    4.732567] fbcon: nouveaufb (fb0) is primary device
[    4.747128] Console: switching to colour frame buffer device 240x67
[    4.749129] nouveau 0000:05:00.0: fb0: nouveaufb frame buffer device
[    4.749140] nouveau 0000:05:00.0: registered panic notifier
[    4.749157] [drm] Initialized nouveau 1.1.1 20120801 for 0000:05:00.0 on minor 0
[    4.767051] intel8x0_measure_ac97_clock: measured 50187 usecs (2472 samples)
[    4.767078] intel8x0: clocking to 46776
[    4.789026] usb 2-1: New USB device found, idVendor=058f, idProduct=9360
[    4.789052] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.789065] usb 2-1: Product: USB Reader
[    4.789074] usb 2-1: Manufacturer:  
[    4.789082] usb 2-1: SerialNumber: 9205291
[    5.010328] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[    5.125174] usb 1-8: MAC-Address: 58:2c:80:13:92:63
[    5.125431] cdc_ncm 1-8:1.1 wwan0: register 'cdc_ncm' at usb-0000:00:02.1-8, Mobile Broadband Network Device, 58:2c:80:13:92:63
[    5.125723] usbcore: registered new interface driver cdc_ncm
[    5.191765] usb-storage 1-8:1.4: USB Mass Storage device detected
[    5.192963] usbcore: registered new interface driver usbserial
[    5.193013] usbcore: registered new interface driver usbserial_generic
[    5.193921] usbserial: USB Serial support registered for generic
[    5.194682] scsi6 : usb-storage 1-8:1.4
[    5.194810] usb-storage 1-8:1.5: USB Mass Storage device detected
[    5.194908] scsi7 : usb-storage 1-8:1.5
[    5.194988] usb-storage 2-1:1.0: USB Mass Storage device detected
[    5.195099] scsi8 : usb-storage 2-1:1.0
[    5.195180] usbcore: registered new interface driver usb-storage
[    5.212283] usbcore: registered new interface driver option
[    5.212550] usbserial: USB Serial support registered for GSM modem (1-port)
[    5.212613] option 1-8:1.0: GSM modem (1-port) converter detected
[    5.213036] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB0
[    5.213102] option 1-8:1.2: GSM modem (1-port) converter detected
[    5.213243] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB1
[    5.213277] option 1-8:1.3: GSM modem (1-port) converter detected
[    5.213402] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB2
[    6.198202] scsi 7:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
[    6.199156] scsi 6:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
[    6.204824] sr1: scsi-1 drive
[    6.205025] sr 6:0:0:0: Attached scsi CD-ROM sr1
[    6.205129] scsi 8:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
[    6.205306] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[    6.221481] Adding 510972k swap on /dev/sda4.  Priority:-1 extents:1 across:510972k 
[    6.260101] scsi 8:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
[    6.296896] fuse init (API version 7.22)
[    6.326074] scsi 8:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
[    6.403059] scsi 8:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
[    6.715053] sd 8:0:0:0: [sdd] Attached SCSI removable disk
[    6.759050] sd 8:0:0:1: [sde] Attached SCSI removable disk
[    6.792054] sd 8:0:0:2: [sdf] Attached SCSI removable disk
[    6.814050] sd 8:0:0:3: [sdg] Attached SCSI removable disk
[    7.481323] EXT4-fs (sda3): re-mounted. Opts: (null)
[    7.884928] lp0: using parport0 (interrupt-driven).
[    7.885441] lp0: console ready
[   12.386990] microcode: AMD CPU family 0xf not supported
[   15.824217] NET: Registered protocol family 10
[   20.989385] forcedeth 0000:00:0a.0 eth0: no link during initialization
[   20.989756] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   26.012358] option1 ttyUSB0: option_instat_callback: error -108
[   26.012704] option1 ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-2)
[   26.012709] option1 ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-2)
[   26.012713] option1 ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-2)
[   26.012929] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[   26.012940] option 1-8:1.0: device disconnected
[   26.012952] cdc_ncm 1-8:1.1 wwan0: unregister 'cdc_ncm' usb-0000:00:02.1-8, Mobile Broadband Network Device
[   27.031708] option1 ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-2)
[   27.031715] option1 ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-2)
[   27.031719] option1 ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-2)
[   27.033705] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[   27.033724] option 1-8:1.2: device disconnected
[   27.033957] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-2)
[   27.033962] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-2)
[   27.033966] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-2)
[   27.034752] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[   27.034765] option 1-8:1.3: device disconnected
[   27.136015] usb 1-8: reset high-speed USB device number 3 using ehci-pci
[   27.252999] option 1-8:1.3: GSM modem (1-port) converter detected
[   27.253836] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB0
[   27.253971] option 1-8:1.2: GSM modem (1-port) converter detected
[   27.254803] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB1
[   27.257087] usb 1-8: MAC-Address: 58:2c:80:13:92:63
[   27.257296] cdc_ncm 1-8:1.1 wwan0: register 'cdc_ncm' at usb-0000:00:02.1-8, Mobile Broadband Network Device, 58:2c:80:13:92:63
[   27.257337] option 1-8:1.0: GSM modem (1-port) converter detected
[   27.257972] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB2