[Risolto] problemi con aggiornamento del 26 marzo
Inviato: sab 26 mar 2016, 10:49
Scusate dopo aver eseguito stamattina i consueti aggiornamenti di sistema, mi sono ritrovato un sistema compromesso.Premetto che uso la versione current della 64 bit e come desktop manager ho xfce. Intanto l'icona di network manager che mi spunta sul pannello superiore mi segna il simbolo della batteria in carica quando invece sto usando la batteria, e cosa ancora piu grave sempre nel pannello in alto dove ci sta il mio nome utente se ci clicco tra le varie opzioni (blocca schermo, cambia utente, sospendi, spegni esci) mi da la possibilità di eseguire solo blocca schermo ed esci, e mi è sparita la possibilità di spegnere il sistema. inoltre tutto mi si è rallentato, o meglio quando accedo allo startx, se clicco su finestra terminale che voglio aprirla, sembra nopn fare nulla, e la apre dopo circa 50 secondi, come se il sistema in questo intermezzo fosse impegnato o bloccato da qualche processo, però se nello stesso momento apro boriwser o foto me le apre all'istante, solo se clicco su finestra terminale, vlc ed altro rimane come bloccato, comunque dopo che mi apre la finestra terminale, se la richiudo e ci riclicco sulla icona per aprire lo fa fulmineamente, ma all'inizio è come se tutto fosse incasinato. Non so se può essere collegato ma ho notato quando finalmente si apre la finestra terminale, digitando il comando top, che circa l'88 % della cpu viene occupato dal processo gnome keyring + e subito dopo qualche secondo noto che il processo non rientra piu nel carico della cpu, che sia questo che in quei circa 50 e passa secondi rallenta tutto? Praticamente in questo frangente in cui tutto sembra bloccato ho notato che se clicco sul mio nome utente (nella barra in alto) rimane bloccato e non mi da la classica sotto finestra con le varie opzioni (blocca schermo, sospendi, spegni, esci), il sistema ridiventa reattivo solo quando cliccando sul mio nome utente nella barra in alto, mi da le opzioni. Davvero non capisco se qualche aggiornamento di stamattina (tra cui anche il network manager che è arrivato alla relase 1.10.10-x86_64-5 ha in realtà compromesso qualcosa. Tanto che ho provato a fare un upgrade dello stesso alla versione precedente, (avevo consevata la release 1.10.10_3 ma a nulla è servito, mettendola ho incasinato ancora di più, tanto che poi ho dovuto ripristinare rimettendo la versione che mi ha scaricato oggi. Inutile è valso ogni mio tentativo di ricostruire l'ambiente grafico
o addirittura lo xorg. Adesso chiedo a voi esperti se ci sta un modo per risolvere la situazione o capire cosa sia successo al sistema dopo gli aggiornamenti di oggi. Se devo postare qualche comando per illustrarvi meglio la mia situazione, ditemi pure, ma per favore datemi una mano perchè il sistema in questo modo è davvero inusabile.
Questo parte del mio Xorg-0 log, praticamente evito di copiarlo tutto perchè poi è un continuo ripetersi all'infinito delle ultime righe.
Codice: Seleziona tutto
/usr/bin/xfwm4 --replace &Questo parte del mio Xorg-0 log, praticamente evito di copiarlo tutto perchè poi è un continuo ripetersi all'infinito delle ultime righe.
Codice: Seleziona tutto
[code][[ 1860.710]
X.Org X Server 1.18.2
Release Date: 2016-03-11
[ 1860.719] X Protocol Version 11, Revision 0
[ 1860.722] Build Operating System: Slackware 14.2 Slackware Linux Project
[ 1860.724] Current Operating System: Linux darkstar 4.4.6 #2 SMP Wed Mar 16 14:17:03 CDT 2016 x86_64
[ 1860.725] Kernel command line: \EFI\slackware\vmlinuz.efi ro root=/dev/sda8 rootfs=ext4 elevator=noop
[ 1860.730] Build Date: 13 March 2016 01:36:36PM
[ 1860.732]
[ 1860.735] Current version of pixman: 0.34.0
[ 1860.740] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1860.740] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1860.749] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 26 10:55:04 2016
[ 1860.751] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 1860.751] (==) No Layout section. Using the first Screen section.
[ 1860.751] (==) No screen section available. Using defaults.
[ 1860.751] (**) |-->Screen "Default Screen Section" (0)
[ 1860.751] (**) | |-->Monitor "<default monitor>"
[ 1860.751] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 1860.751] (==) Automatically adding devices
[ 1860.751] (==) Automatically enabling devices
[ 1860.751] (==) Automatically adding GPU devices
[ 1860.751] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 1860.751] (WW) The directory "/usr/share/fonts/local" does not exist.
[ 1860.751] Entry deleted from font path.
[ 1860.751] (WW) The directory "/usr/share/fonts/CID" does not exist.
[ 1860.751] Entry deleted from font path.
[ 1860.751] (==) FontPath set to:
/usr/share/fonts/TTF,
/usr/share/fonts/OTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi/:unscaled,
/usr/share/fonts/100dpi/:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi,
/usr/share/fonts/cyrillic
[ 1860.751] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 1860.751] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 1860.751] (II) Loader magic: 0x808c00
[ 1860.751] (II) Module ABI versions:
[ 1860.751] X.Org ANSI C Emulation: 0.4
[ 1860.751] X.Org Video Driver: 20.0
[ 1860.751] X.Org XInput driver : 22.1
[ 1860.751] X.Org Server Extension : 9.0
[ 1860.752] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 1860.753] (--) PCI:*(0:0:2:0) 8086:0166:17aa:21f9 rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00004000/64
[ 1860.753] (II) Open ACPI successful (/var/run/acpid.socket)
[ 1860.753] (II) LoadModule: "glx"
[ 1860.753] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 1860.754] (II) Module glx: vendor="X.Org Foundation"
[ 1860.754] compiled for 1.18.2, module version = 1.0.0
[ 1860.754] ABI class: X.Org Server Extension, version 9.0
[ 1860.754] (==) AIGLX enabled
[ 1860.754] (==) Matched intel as autoconfigured driver 0
[ 1860.754] (==) Matched intel as autoconfigured driver 1
[ 1860.754] (==) Matched modesetting as autoconfigured driver 2
[ 1860.754] (==) Matched fbdev as autoconfigured driver 3
[ 1860.754] (==) Matched vesa as autoconfigured driver 4
[ 1860.754] (==) Assigned the driver to the xf86ConfigLayout
[ 1860.754] (II) LoadModule: "intel"
[ 1860.755] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[ 1860.755] (II) Module intel: vendor="X.Org Foundation"
[ 1860.755] compiled for 1.18.1, module version = 2.99.917
[ 1860.755] Module class: X.Org Video Driver
[ 1860.755] ABI class: X.Org Video Driver, version 20.0
[ 1860.755] (II) LoadModule: "modesetting"
[ 1860.755] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 1860.755] (II) Module modesetting: vendor="X.Org Foundation"
[ 1860.755] compiled for 1.18.2, module version = 1.18.2
[ 1860.755] Module class: X.Org Video Driver
[ 1860.755] ABI class: X.Org Video Driver, version 20.0
[ 1860.755] (II) LoadModule: "fbdev"
[ 1860.755] (WW) Warning, couldn't open module fbdev
[ 1860.755] (II) UnloadModule: "fbdev"
[ 1860.755] (II) Unloading fbdev
[ 1860.755] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 1860.755] (II) LoadModule: "vesa"
[ 1860.755] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[ 1860.755] (II) Module vesa: vendor="X.Org Foundation"
[ 1860.755] compiled for 1.18.0, module version = 2.3.4
[ 1860.755] Module class: X.Org Video Driver
[ 1860.755] ABI class: X.Org Video Driver, version 20.0
[ 1860.755] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 1860.756] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 1860.756] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 1860.756] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 1860.756] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 1860.756] (II) VESA: driver for VESA chipsets: vesa
[ 1860.756] (--) using VT number 7
[ 1860.759] (WW) Falling back to old probe method for modesetting
[ 1860.759] (WW) Falling back to old probe method for vesa
[ 1860.759] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 1860.759] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 1860.759] (==) intel(0): RGB weight 888
[ 1860.759] (==) intel(0): Default visual is TrueColor
[ 1860.759] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[ 1860.759] (**) intel(0): Relaxed fencing enabled
[ 1860.759] (**) intel(0): Wait on SwapBuffers? enabled
[ 1860.759] (**) intel(0): Triple buffering? enabled
[ 1860.759] (**) intel(0): Framebuffer tiled
[ 1860.759] (**) intel(0): Pixmaps tiled
[ 1860.759] (**) intel(0): 3D buffers tiled
[ 1860.759] (**) intel(0): SwapBuffers wait enabled
[ 1860.759] (==) intel(0): video overlay key set to 0x101fe
[ 1860.759] (II) intel(0): Output LVDS1 has no monitor section
[ 1860.760] (--) intel(0): found backlight control interface intel_backlight
[ 1860.768] (II) intel(0): Output VGA1 has no monitor section
[ 1860.856] (II) intel(0): Output HDMI1 has no monitor section
[ 1860.856] (II) intel(0): Output DP1 has no monitor section
[ 1860.856] (II) intel(0): EDID for output LVDS1
[ 1860.856] (II) intel(0): Manufacturer: LGD Model: 382 Serial#: 0
[ 1860.856] (II) intel(0): Year: 2012 Week: 0
[ 1860.856] (II) intel(0): EDID Version: 1.3
[ 1860.856] (II) intel(0): Digital Display Input
[ 1860.856] (II) intel(0): Max Image Size [cm]: horiz.: 31 vert.: 17
[ 1860.856] (II) intel(0): Gamma: 2.20
[ 1860.856] (II) intel(0): No DPMS capabilities specified
[ 1860.856] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 1860.856] (II) intel(0): First detailed timing is preferred mode
[ 1860.856] (II) intel(0): redX: 0.639 redY: 0.347 greenX: 0.330 greenY: 0.631
[ 1860.856] (II) intel(0): blueX: 0.154 blueY: 0.047 whiteX: 0.313 whiteY: 0.329
[ 1860.856] (II) intel(0): Manufacturer's mask: 0
[ 1860.856] (II) intel(0): Supported detailed timing:
[ 1860.856] (II) intel(0): clock: 108.0 MHz Image Size: 309 x 174 mm
[ 1860.856] (II) intel(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1924 h_border: 0
[ 1860.856] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 908 v_blanking: 936 v_border: 0
[ 1860.856] (II) intel(0): LG Display
[ 1860.856] (II) intel(0): LP140WD2-TLE2
[ 1860.856] (II) intel(0): EDID (in hex):
[ 1860.856] (II) intel(0): 00ffffffffffff0030e4820300000000
[ 1860.856] (II) intel(0): 00160103801f11780aba85a35854a127
[ 1860.856] (II) intel(0): 0c505400000001010101010101010101
[ 1860.857] (II) intel(0): 010101010101302a4044618424303020
[ 1860.857] (II) intel(0): 350035ae100000190000000000000000
[ 1860.857] (II) intel(0): 00000000000000000000000000fe004c
[ 1860.857] (II) intel(0): 4720446973706c61790a2020000000fe
[ 1860.857] (II) intel(0): 004c503134305744322d544c45320052
[ 1860.857] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 1860.857] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 1860.857] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 1860.857] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 1860.857] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 1860.857] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 1860.857] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 1860.857] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 1860.857] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 1860.857] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 1860.857] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 1860.857] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 1860.857] (II) intel(0): Printing probed modes for output LVDS1
[ 1860.857] (II) intel(0): Modeline "1600x900"x60.0 108.00 1600 1648 1680 1924 900 903 908 936 -hsync -vsync (56.1 kHz eP)
[ 1860.857] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 1860.857] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 1860.857] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 1860.857] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 1860.865] (II) intel(0): EDID for output VGA1
[ 1860.953] (II) intel(0): EDID for output HDMI1
[ 1860.953] (II) intel(0): EDID for output DP1
[ 1860.953] (II) intel(0): Output LVDS1 connected
[ 1860.953] (II) intel(0): Output VGA1 disconnected
[ 1860.953] (II) intel(0): Output HDMI1 disconnected
[ 1860.953] (II) intel(0): Output DP1 disconnected
[ 1860.953] (II) intel(0): Using exact sizes for initial modes
[ 1860.953] (II) intel(0): Output LVDS1 using initial mode 1600x900 +0+0
[ 1860.953] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 1860.953] (II) intel(0): Kernel page flipping support detected, enabling
[ 1860.953] (==) intel(0): DPI set to (96, 96)
[ 1860.953] (II) Loading sub module "fb"
[ 1860.953] (II) LoadModule: "fb"
[ 1860.954] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 1860.955] (II) Module fb: vendor="X.Org Foundation"
[ 1860.955] compiled for 1.18.2, module version = 1.0.0
[ 1860.955] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1860.955] (II) Loading sub module "dri2"
[ 1860.955] (II) LoadModule: "dri2"
[ 1860.955] (II) Module "dri2" already built-in
[ 1860.955] (II) UnloadModule: "modesetting"
[ 1860.955] (II) Unloading modesetting
[ 1860.956] (II) UnloadModule: "vesa"
[ 1860.956] (II) Unloading vesa
[ 1860.956] (==) Depth 24 pixmap format is 32 bpp
[ 1860.956] (II) intel(0): Allocated new frame buffer 1600x900 stride 6656, tiled
[ 1860.958] (II) UXA(0): Driver registered support for the following operations:
[ 1860.958] (II) solid
[ 1860.958] (II) copy
[ 1860.958] (II) composite (RENDER acceleration)
[ 1860.958] (II) put_image
[ 1860.958] (II) get_image
[ 1860.958] (II) intel(0): [DRI2] Setup complete
[ 1860.958] (II) intel(0): [DRI2] DRI driver: i965
[ 1860.958] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 1860.958] (==) intel(0): Backing store enabled
[ 1860.958] (==) intel(0): Silken mouse enabled
[ 1860.958] (II) intel(0): Initializing HW Cursor
[ 1860.958] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 1860.958] (==) intel(0): DPMS enabled
[ 1860.958] (==) intel(0): Intel XvMC decoder enabled
[ 1860.958] (II) intel(0): Set up textured video
[ 1860.958] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 1860.958] (II) intel(0): DRI2: Enabled
[ 1860.958] (II) intel(0): DRI3: Disabled
[ 1860.958] (==) intel(0): hotplug detection: "enabled"
[ 1860.985] (--) RandR disabled
[ 1861.014] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 1861.014] (II) AIGLX: enabled GLX_ARB_create_context
[ 1861.014] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 1861.014] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 1861.014] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 1861.014] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 1861.014] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 1861.014] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 1861.014] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 1861.014] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 1861.014] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 1861.014] (II) AIGLX: Loaded and initialized i965
[ 1861.014] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 1861.014] (II) intel(0): Setting screen physical size to 423 x 238
[ 1861.136] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 1861.137] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1861.137] (**) Power Button: Applying InputClass "keyboard-all"
[ 1861.137] (II) LoadModule: "evdev"
[ 1861.137] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 1861.138] (II) Module evdev: vendor="X.Org Foundation"
[ 1861.138] compiled for 1.18.0, module version = 2.10.1
[ 1861.138] Module class: X.Org XInput Driver
[ 1861.138] ABI class: X.Org XInput driver, version 22.1
[ 1861.138] (II) Using input driver 'evdev' for 'Power Button'
[ 1861.138] (**) Power Button: always reports core events
[ 1861.138] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 1861.138] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 1861.138] (--) evdev: Power Button: Found keys
[ 1861.138] (II) evdev: Power Button: Configuring as keyboard
[ 1861.138] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[ 1861.138] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 1861.138] (**) Option "xkb_rules" "evdev"
[ 1861.138] (**) Option "xkb_layout" "us"
[ 1861.138] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 1861.172] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 1861.172] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 1861.172] (**) Video Bus: Applying InputClass "keyboard-all"
[ 1861.172] (II) Using input driver 'evdev' for 'Video Bus'
[ 1861.172] (**) Video Bus: always reports core events
[ 1861.172] (**) evdev: Video Bus: Device: "/dev/input/event6"
[ 1861.173] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 1861.173] (--) evdev: Video Bus: Found keys
[ 1861.173] (II) evdev: Video Bus: Configuring as keyboard
[ 1861.173] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8/event6"
[ 1861.173] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 1861.173] (**) Option "xkb_rules" "evdev"
[ 1861.173] (**) Option "xkb_layout" "us"
[ 1861.173] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 1861.173] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 1861.173] (II) No input driver specified, ignoring this device.
[ 1861.173] (II) This device may have been added with another device file.
[ 1861.173] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 1861.173] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 1861.173] (**) Sleep Button: Applying InputClass "keyboard-all"
[ 1861.173] (II) Using input driver 'evdev' for 'Sleep Button'
[ 1861.173] (**) Sleep Button: always reports core events
[ 1861.173] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 1861.173] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 1861.173] (--) evdev: Sleep Button: Found keys
[ 1861.173] (II) evdev: Sleep Button: Configuring as keyboard
[ 1861.173] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event3"
[ 1861.173] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 1861.173] (**) Option "xkb_rules" "evdev"
[ 1861.173] (**) Option "xkb_layout" "us"
[ 1861.173] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 1861.174] (II) config/udev: Adding input device Integrated Camera (/dev/input/event11)
[ 1861.174] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[ 1861.174] (**) Integrated Camera: Applying InputClass "keyboard-all"
[ 1861.174] (II) Using input driver 'evdev' for 'Integrated Camera'
[ 1861.174] (**) Integrated Camera: always reports core events
[ 1861.174] (**) evdev: Integrated Camera: Device: "/dev/input/event11"
[ 1861.174] (--) evdev: Integrated Camera: Vendor 0x5986 Product 0x266
[ 1861.174] (--) evdev: Integrated Camera: Found keys
[ 1861.174] (II) evdev: Integrated Camera: Configuring as keyboard
[ 1861.174] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input13/event11"
[ 1861.175] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 9)
[ 1861.175] (**) Option "xkb_rules" "evdev"
[ 1861.175] (**) Option "xkb_layout" "us"
[ 1861.175] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 1861.175] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event8)
[ 1861.175] (II) No input driver specified, ignoring this device.
[ 1861.175] (II) This device may have been added with another device file.
[ 1861.175] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event9)
[ 1861.175] (II) No input driver specified, ignoring this device.
[ 1861.175] (II) This device may have been added with another device file.
[ 1861.175] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event7)
[ 1861.175] (II) No input driver specified, ignoring this device.
[ 1861.175] (II) This device may have been added with another device file.
[ 1861.176] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 1861.176] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 1861.176] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard-all"
[ 1861.176] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 1861.176] (**) AT Translated Set 2 keyboard: always reports core events
[ 1861.176] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 1861.176] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 1861.176] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 1861.176] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 1861.176] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 1861.176] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 1861.176] (**) Option "xkb_rules" "evdev"
[ 1861.176] (**) Option "xkb_layout" "us"
[ 1861.176] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 1861.176] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
[ 1861.176] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 1861.176] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad"
[ 1861.176] (II) LoadModule: "synaptics"
[ 1861.177] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[ 1861.177] (II) Module synaptics: vendor="X.Org Foundation"
[ 1861.177] compiled for 1.18.0, module version = 1.8.3
[ 1861.177] Module class: X.Org XInput Driver
[ 1861.177] ABI class: X.Org XInput driver, version 22.1
[ 1861.177] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 1861.177] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 1861.177] (**) Option "Device" "/dev/input/event10"
[ 1861.203] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 1861.203] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1264 - 5678 (res 46)
[ 1861.203] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1124 - 4732 (res 63)
[ 1861.203] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 1861.203] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 1861.203] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 1861.203] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 1861.203] (**) Option "TapButton1" "1"
[ 1861.203] (**) Option "TapButton2" "2"
[ 1861.203] (**) Option "TapButton3" "3"
[ 1861.203] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 1861.203] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 1861.215] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event10"
[ 1861.215] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[ 1861.215] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 1861.215] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 1861.215] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.035
[ 1861.215] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 1861.215] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 1861.215] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 1861.215] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 1861.216] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 1861.216] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 1861.216] (II) No input driver specified, ignoring this device.
[ 1861.216] (II) This device may have been added with another device file.
[ 1861.217] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event12)
[ 1861.217] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 1861.217] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 1861.217] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 1861.217] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event12"
[ 1861.217] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 1861.217] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 1861.217] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 1861.217] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 1861.217] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 1861.217] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 1861.217] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1861.217] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input12/event12"
[ 1861.217] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 12)
[ 1861.218] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 1861.218] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 1861.218] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 1861.218] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 1861.218] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 1861.218] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[ 1861.218] (II) No input driver specified, ignoring this device.
[ 1861.218] (II) This device may have been added with another device file.
[ 1861.219] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event5)
[ 1861.219] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 1861.219] (**) ThinkPad Extra Buttons: Applying InputClass "keyboard-all"
[ 1861.219] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 1861.219] (**) ThinkPad Extra Buttons: always reports core events
[ 1861.219] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event5"
[ 1861.219] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[ 1861.219] (--) evdev: ThinkPad Extra Buttons: Found keys
[ 1861.219] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 1861.219] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input6/event5"
[ 1861.219] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 13)
[ 1861.219] (**) Option "xkb_rules" "evdev"
[ 1861.219] (**) Option "xkb_layout" "us"
[ 1861.219] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 1861.220] (II) config/udev: Adding input device Speakup (/dev/input/event1)
[ 1861.220] (**) Speakup: Applying InputClass "evdev keyboard catchall"
[ 1861.220] (**) Speakup: Applying InputClass "keyboard-all"
[ 1861.220] (II) Using input driver 'evdev' for 'Speakup'
[ 1861.220] (**) Speakup: always reports core events
[ 1861.220] (**) evdev: Speakup: Device: "/dev/input/event1"
[ 1861.220] (--) evdev: Speakup: Vendor 0 Product 0
[ 1861.220] (--) evdev: Speakup: Found keys
[ 1861.220] (II) evdev: Speakup: Configuring as keyboard
[ 1861.220] (**) Option "config_info" "udev:/sys/devices/virtual/input/input2/event1"
[ 1861.220] (II) XINPUT: Adding extended input device "Speakup" (type: KEYBOARD, id 14)
[ 1861.220] (**) Option "xkb_rules" "evdev"
[ 1861.221] (**) Option "xkb_layout" "us"
[ 1861.221] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 1861.418] (II) intel(0): EDID vendor "LGD", prod id 898
[ 1861.418] (II) intel(0): Printing DDC gathered Modelines:
[ 1861.418] (II) intel(0): Modeline "1600x900"x0.0 108.00 1600 1648 1680 1924 900 903 908 936 -hsync -vsync (56.1 kHz eP)
[ 1861.569] (II) intel(0): EDID vendor "LGD", prod id 898
[ 1861.569] (II) intel(0): Printing DDC gathered Modelines:
[ 1861.569] (II) intel(0): Modeline "1600x900"x0.0 108.00 1600 1648 1680 1924 900 903 908 936 -hsync -vsync (56.1 kHz eP)
[ 1861.751] (II) intel(0): EDID vendor "LGD", prod id 898
[ 1861.751] (II) intel(0): Printing DDC gathered Modelines:
[ 1861.751] (II) intel(0): Modeline "1600x900"x0.0 108.00 1600 1648 1680 1924 900 903 908 936 -hsync -vsync (56.1 kHz eP)
[ 1933.677] (II) GetModeLine - scrn: 0 clock: 108000
[ 1933.677] (II) GetModeLine - hdsp: 1600 hbeg: 1648 hend: 1680 httl: 1924
[ 1933.677] (II) vdsp: 900 vbeg: 903 vend: 908 vttl: 936 flags: 10
[ 1933.691] (II) GetModeLine - scrn: 0 clock: 108000
[ 1933.691] (II) GetModeLine - hdsp: 1600 hbeg: 1648 hend: 1680 httl: 1924
[ 1933.691] (II) vdsp: 900 vbeg: 903 vend: 908 vttl: 936 flags: 10
[ 1933.702] (II) GetModeLine - scrn: 0 clock: 108000
[ 1933.702] (II) GetModeLine - hdsp: 1600 hbeg: 1648 hend: 1680 httl: 1924
[ 1933.702] (II) vdsp: 900 vbeg: 903 vend: 908 vttl: 936 flags: 10
[ 1933.713] (II) GetModeLine - scrn: 0 clock: 108000
[ 1933.713] (II) GetModeLine - hdsp: 1600 hbeg: 1648 hend: 1680 httl: 1924
[ 1933.713] (II) vdsp: 900 vbeg: 903 vend: 908 vttl: 936 flags: 10
[ 1933.731] (II) GetModeLine - scrn: 0 clock: 108000
[ 1933.731] (II) GetModeLine - hdsp: 1600 hbeg: 1648 hend: 1680 httl: 1924
[ 1933.731] (II) vdsp: 900 vbeg: 903 vend: 908 vttl: 936 flags: 10
[ 1933.747] (II) GetModeLine - scrn: 0 clock: 108000
[ 1933.747] (II) GetModeLine - hdsp: 1600 hbeg: 1648 hend: 1680 httl: 1924
[ 1933.747] (II) vdsp: 900 vbeg: 903 vend: 908 vttl: 936 flags: 10
[ 1933.780] (II) GetModeLine - scrn: 0 clock: 108000
[ 1933.780] (II) GetModeLine - hdsp: 1600 hbeg: 1648 hend: 1680 httl: 1924
[ 1933.780] (II) vdsp: 900 vbeg: 903 vend: 908 vttl: 936 flags: 10
[ 1933.889] (II) GetModeLine - scrn: 0 clock: 108000
[ 1933.889] (II) GetModeLine - hdsp: 1600 hbeg: 1648 hend: 1680 httl: 1924
[ 1933.889] (II) vdsp: 900 vbeg: 903 vend: 908 vttl: 936 flags: 10
[ 1933.931] (II) GetModeLine - scrn: 0 clock: 108000
[ 1933.931] (II) GetModeLine - hdsp: 1600 hbeg: 1648 hend: 1680 httl: 1924
[ 1933.931] (II) vdsp: 900 vbeg: 903 vend: 908 vttl: 936 flags: 10
[ 1933.948] (II) GetModeLine - scrn: 0 clock: 108000
[ 1933.948] (II) GetModeLine - hdsp: 1600 hbeg: 1648 hend: 1680 httl: 1924
[ 1933.948] (II) vdsp: 900 vbeg: 903 vend: 908 vttl: 936 flags: 10
[ 1934.062] (II) GetModeLine - scrn: 0 clock: 108000
[ 1934.062] (II) GetModeLine - hdsp: 1600 hbeg: 1648 hend: 1680 httl: 1924
[ 1934.062] (II) vdsp: 900 vbeg: 903 vend: 908 vttl: 936 flags: 10
[ 1934.419] (II) GetModeLine - scrn: 0 clock: 108000
[ 1934.419] (II) GetModeLine - hdsp: 1600 hbeg: 1648 hend: 1680 httl: 1924
[ 1934.419] (II) vdsp: 900 vbeg: 903 vend: 908 vttl: 936 flags: 10
[ 1934.492] (II) GetModeLine - scrn: 0 clock: 108000
[ 1934.492] (II) GetModeLine - hdsp: 1600 hbeg: 1648 hend: 1680 httl: 1924
[ 1934.492] (II) vdsp: 900 vbeg: 903 vend: 908 vttl: 936 flags: 10
[ 1934.520] (II) GetModeLine - scrn: 0 clock: 108000
[ 1934.520] (II) GetModeLine - hdsp: 1600 hbeg: 1648 hend: 1680 httl: 1924
[ 1934.520] (II) vdsp: 900 vbeg: 903 vend: 908 vttl: 936 flags: 10
[ 1934.565] (II) GetModeLine - scrn: 0 clock: 108000
[ 1934.565] (II) GetModeLine - hdsp: 1600 hbeg: 1648 hend: 1680 httl: 1924
[ 1934.565] (II) vdsp: 900 vbeg: 903 vend: 908 vttl: 936 flags: 10
[ 1934.579] (II) GetModeLine - scrn: 0 clock: 108000
[ 1934.579] (II) GetModeLine - hdsp: 1600 hbeg: 1648 hend: 1680 httl: 1924
[ 1934.579] (II) vdsp: 900 vbeg: 903 vend: 908 vttl: 936 flags: 10
[ 1934.596] (II) GetModeLine - scrn: 0 clock: 108000
[ 1934.596] (II) GetModeLine - hdsp: 1600 hbeg: 1648 hend: 1680 httl: 1924
[ 1934.596] (II) vdsp: 900 vbeg: 903 vend: 908 vttl: 936 flags: 10
[ 1934.613] (II) GetModeLine - scrn: 0 clock: 108000
[ 1934.613] (II) GetModeLine - hdsp: 1600 hbeg: 1648 hend: 1680 httl: 1924
[ 1934.613] (II) vdsp: 900 vbeg: 903 vend: 908 vttl: 936 flags: 10
[ 1934.630] (II) GetModeLine - scrn: 0 clock: 108000
[ 1934.630] (II) GetModeLine - hdsp: 1600 hbeg: 1648 hend: 1680 httl: 1924
[ 1934.630] (II) vdsp: 900 vbeg: 903 vend: 908 vttl: 936 flags: 10
[ 1934.646] (II) GetModeLine - scrn: 0 clock: 108000
[ 1934.646] (II) GetModeLine - hdsp: 1600 hbeg: 1648 hend: 1680 httl: 1924
[ 1934.646] (II) vdsp: 900 vbeg: 903 vend: 908 vttl: 936 flags: 10
[ 1934.682] (II) GetModeLine - scrn: 0 clock: 108000
[ 1934.682] (II) GetModeLine - hdsp: 1600 hbeg: 1648 hend: 1680 httl: 1924
[ 1934.682] (II) vdsp: 900 vbeg: 903 vend: 908 vttl: 936 flags: 10
[ 1934.708] (II) GetModeLine - scrn: 0 clock: 108000
[ 1934.708] (II) GetModeLine - hdsp: 1600 hbeg: 1648 hend: 1680 httl: 1924
[ 1934.708] (II) vdsp: 900 vbeg: 903 vend: 908 vttl: 936 flags: 10
[ 1934.720] (II) GetModeLine - scrn: 0 clock: 108000
[ 1934.720] (II) GetModeLine - hdsp: 1600 hbeg: 1648 hend: 1680 httl: 1924
[ 1934.720] (II) vdsp: 900 vbeg: 903 vend: 908 vttl: 936 flags: 10
[ 1934.738] (II) GetModeLine - scrn: 0 clock: 108000
[ 1934.738] (II) GetModeLine - hdsp: 1600 hbeg: 1648 hend: 1680 httl: 1924
[ 1934.738] (II) vdsp: 900 vbeg: 903 vend: 908 vttl: 936 flags: 10/code]