Moderatore: Staff
No se fai da Konsole, non succede niente. Devi provare quando esci da KDEsardylan ha scritto:Niente da fare... Ho provato addirittura ad aprire Konsole, dare un bel su e poi telinit 3... Non è successo niente...Codice: Seleziona tutto
sardylan@server:~$ su Password: root@server:/home/sardylan# telinit 3 root@server:/home/sardylan# pidof X 3463 root@server:/home/sardylan#
Se il server X sta girando dovresti vedere i messaggi di shutdown. Ma se mi dici chesardylan ha scritto:Ma telinit 3 deve fare qualcosa? Nel senso che devo vedere che riesegue gli script di avvio??? Oppure no??? Perché quando ho chiuso la sessione di X, ed ho dato la prima volta telinit 3 non è successo assolutamente niente, ed invece del pidof ho dato un "ps -A | grep X" e non c'era niente, nessun X...
Codice: Seleziona tutto
xauth: creating new authority file /root/.serverauth.3901
Fatal server error:
Server is already active for display 0
If this server is no longer running, remove /tmp/.X0-lock
and start again.
Please consult the The X.Org Foundation support
at http://wiki.X.Org
for help.
Codice: Seleziona tutto
Jan 10 10:44:15 server syslogd 1.4.1: restart.
Jan 10 10:44:15 server kernel: klogd 1.4.1, log source = /proc/kmsg started.
Jan 10 10:44:15 server kernel: Linux version 2.6.21.5-smp (root@midas) (gcc version 4.1.2) #2 SMP Tue Jun 19 14:58:11 CDT 2007
Jan 10 10:44:15 server kernel: BIOS-provided physical RAM map:
Jan 10 10:44:15 server kernel: 127MB HIGHMEM available.
Jan 10 10:44:15 server kernel: 896MB LOWMEM available.
Jan 10 10:44:15 server kernel: found SMP MP-table at 000f6490
Jan 10 10:44:15 server kernel: DMI 2.4 present.
Jan 10 10:44:15 server kernel: ACPI: PM-Timer IO Port: 0x1008
Jan 10 10:44:15 server kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Jan 10 10:44:15 server kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Jan 10 10:44:15 server kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Jan 10 10:44:15 server kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Jan 10 10:44:15 server kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
Jan 10 10:44:15 server kernel: Using ACPI (MADT) for SMP configuration information
Jan 10 10:44:15 server kernel: Kernel command line: BOOT_IMAGE=Slackware ro root=802
Jan 10 10:44:15 server kernel: Enabling fast FPU save and restore... done.
Jan 10 10:44:15 server kernel: Enabling unmasked SIMD FPU exception support... done.
Jan 10 10:44:15 server kernel: Initializing CPU#0
Jan 10 10:44:15 server kernel: Memory: 1029612k/1048512k available (6215k kernel code, 18300k reserved, 2017k data, 392k init, 131008k highmem)
Jan 10 10:44:15 server kernel: Security Framework v1.0.0 initialized
Jan 10 10:44:15 server kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Jan 10 10:44:15 server kernel: CPU: L2 Cache: 512K (64 bytes/line)
Jan 10 10:44:15 server kernel: Intel machine check architecture supported.
Jan 10 10:44:15 server kernel: Intel machine check reporting enabled on CPU#0.
Jan 10 10:44:15 server kernel: Checking 'hlt' instruction... OK.
Jan 10 10:44:15 server kernel: SMP alternatives: switching to UP code
Jan 10 10:44:15 server kernel: Freeing SMP alternatives: 24k freed
Jan 10 10:44:15 server kernel: ACPI: Core revision 20070126
Jan 10 10:44:15 server kernel: Total of 1 processors activated (4422.57 BogoMIPS).
Jan 10 10:44:15 server kernel: ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Jan 10 10:44:15 server kernel: Brought up 1 CPUs
Jan 10 10:44:15 server kernel: NET: Registered protocol family 16
Jan 10 10:44:15 server kernel: ACPI: bus type pci registered
Jan 10 10:44:15 server kernel: PCI: PCI BIOS revision 2.10 entry at 0xf2550, last bus=1
Jan 10 10:44:15 server kernel: PCI: Using configuration type 1
Jan 10 10:44:15 server kernel: ACPI: Interpreter enabled
Jan 10 10:44:15 server kernel: ACPI: Using IOAPIC for interrupt routing
Jan 10 10:44:15 server kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Jan 10 10:44:15 server kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Jan 10 10:44:15 server kernel: pnp: PnP ACPI init
Jan 10 10:44:15 server kernel: pnp: PnP ACPI: found 11 devices
Jan 10 10:44:15 server kernel: SCSI subsystem initialized
Jan 10 10:44:15 server kernel: usbcore: registered new interface driver usbfs
Jan 10 10:44:15 server kernel: usbcore: registered new interface driver hub
Jan 10 10:44:15 server kernel: usbcore: registered new device driver usb
Jan 10 10:44:15 server kernel: PCI: Using ACPI for IRQ routing
Jan 10 10:44:15 server kernel: PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Jan 10 10:44:15 server kernel: pnp: 00:00: iomem range 0xcf400-0xcffff has been reserved
Jan 10 10:44:15 server kernel: pnp: 00:00: iomem range 0xf0000-0xf7fff could not be reserved
Jan 10 10:44:15 server kernel: pnp: 00:00: iomem range 0xf8000-0xfbfff could not be reserved
Jan 10 10:44:15 server kernel: pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved
Jan 10 10:44:15 server kernel: ACPI: PCI Interrupt 0000:00:09.3[A] -> GSI 17 (level, low) -> IRQ 16
Jan 10 10:44:15 server kernel: Time: tsc clocksource has been installed.
Jan 10 10:44:15 server kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[e7007000-e70077ff] Max Packet=[2048] IR/IT contexts=[4/8]
Jan 10 10:44:15 server kernel: ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 16 (level, low) -> IRQ 17
Jan 10 10:44:15 server kernel: ohci1394: fw-host1: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[e7008000-e70087ff] Max Packet=[2048] IR/IT contexts=[4/8]
Jan 10 10:44:15 server kernel: PCI: Bridge: 0000:00:01.0
Jan 10 10:44:15 server kernel: IO window: disabled.
Jan 10 10:44:15 server kernel: MEM window: e4000000-e5ffffff
Jan 10 10:44:15 server kernel: PREFETCH window: d0000000-dfffffff
Jan 10 10:44:15 server kernel: NET: Registered protocol family 2
Jan 10 10:44:15 server kernel: TCP: Hash tables configured (established 131072 bind 65536)
Jan 10 10:44:15 server kernel: TCP reno registered
Jan 10 10:44:15 server kernel: apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
Jan 10 10:44:15 server kernel: apm: overridden by ACPI.
Jan 10 10:44:15 server kernel: VFS: Disk quotas dquot_6.5.1
Jan 10 10:44:15 server kernel: NTFS driver 2.1.28 [Flags: R/W].
Jan 10 10:44:15 server kernel: JFS: nTxBlock = 8045, nTxLock = 64365
Jan 10 10:44:15 server kernel: SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
Jan 10 10:44:15 server kernel: SGI XFS Quota Management subsystem
Jan 10 10:44:15 server kernel: OCFS2 1.3.3
Jan 10 10:44:15 server kernel: OCFS2 Node Manager 1.3.3
Jan 10 10:44:15 server kernel: OCFS2 DLM 1.3.3
Jan 10 10:44:15 server kernel: OCFS2 DLMFS 1.3.3
Jan 10 10:44:15 server kernel: io scheduler noop registered
Jan 10 10:44:15 server kernel: io scheduler anticipatory registered
Jan 10 10:44:15 server kernel: io scheduler deadline registered
Jan 10 10:44:15 server kernel: io scheduler cfq registered (default)
Jan 10 10:44:15 server kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Jan 10 10:44:15 server kernel: vesafb: framebuffer at 0xd0000000, mapped to 0xf8d00000, using 3072k, total 262144k
Jan 10 10:44:15 server kernel: vesafb: mode is 1024x768x16, linelength=2048, pages=1
Jan 10 10:44:15 server kernel: vesafb: protected mode interface info at c000:e2c0
Jan 10 10:44:15 server kernel: vesafb: pmi: set display start = c00ce2f6, set palette = c00ce360
Jan 10 10:44:15 server kernel: vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
Jan 10 10:44:15 server kernel: vesafb: scrolling: redraw
Jan 10 10:44:15 server kernel: vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Jan 10 10:44:15 server kernel: fb0: VESA VGA frame buffer device
Jan 10 10:44:15 server kernel: isapnp: Scanning for PnP cards...
Jan 10 10:44:15 server kernel: isapnp: No Plug & Play device found
Jan 10 10:44:15 server kernel: Real Time Clock Driver v1.12ac
Jan 10 10:44:15 server kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Jan 10 10:44:15 server kernel: Switched to high resolution mode on CPU 0
Jan 10 10:44:15 server kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jan 10 10:44:15 server kernel: 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jan 10 10:44:15 server kernel: Floppy drive(s): fd0 is 1.44M
Jan 10 10:44:15 server kernel: FDC 0 is a post-1991 82077
Jan 10 10:44:15 server kernel: loop: loaded (max 8 devices)
Jan 10 10:44:15 server kernel: HP CISS Driver (v 3.6.14)
Jan 10 10:44:15 server kernel: input: Macintosh mouse button emulation as /class/input/input0
Jan 10 10:44:15 server kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Jan 10 10:44:15 server kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jan 10 10:44:15 server kernel: SIS5513: IDE controller at PCI slot 0000:00:02.5
Jan 10 10:44:15 server kernel: SIS5513: chipset revision 1
Jan 10 10:44:15 server kernel: SIS5513: not 100%% native mode: will probe irqs later
Jan 10 10:44:15 server kernel: SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
Jan 10 10:44:15 server kernel: ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:pio
Jan 10 10:44:15 server kernel: ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:DMA, hdd:DMA
Jan 10 10:44:15 server kernel: hdc: max request size: 512KiB
Jan 10 10:44:15 server kernel: hdc: 586072368 sectors (300069 MB) w/8192KiB Cache, CHS=36481/255/63, UDMA(100)
Jan 10 10:44:15 server kernel: hdc: cache flushes supported
Jan 10 10:44:15 server kernel: hdc: hdc1
Jan 10 10:44:15 server kernel: hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Jan 10 10:44:15 server kernel: Uniform CD-ROM driver Revision: 3.20
Jan 10 10:44:15 server kernel: hdd: ATAPI 40X CD-ROM CD-R/RW drive, 1404kB Cache, UDMA(33)
Jan 10 10:44:15 server kernel: Loading iSCSI transport class v2.0-724.
Jan 10 10:44:15 server kernel: iscsi: registered transport (tcp)
Jan 10 10:44:15 server kernel: Detecting Adaptec I2O RAID controllers...
Jan 10 10:44:15 server kernel: Adaptec aacraid driver (1.1-5[2423]-mh3)
Jan 10 10:44:15 server kernel: aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
Jan 10 10:44:15 server kernel: sym53c416.c: Version 1.0.0-ac
Jan 10 10:44:15 server kernel: qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver
Jan 10 10:44:15 server kernel: iscsi: registered transport (qla4xxx)
Jan 10 10:44:15 server kernel: QLogic iSCSI HBA Driver
Jan 10 10:44:15 server kernel: seagate: ST0x/TMC-8xx not detected.
Jan 10 10:44:15 server kernel: DC390: clustering now enabled by default. If you get problems load
Jan 10 10:44:15 server kernel: megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
Jan 10 10:44:15 server kernel: megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
Jan 10 10:44:15 server kernel: megasas: 00.00.03.10-rc1 Wed Feb 14 10:14:25 PST 2007
Jan 10 10:44:15 server kernel: nsp32: loading...
Jan 10 10:44:15 server kernel: ipr: IBM Power RAID SCSI Device Driver version: 2.3.1 (January 23, 2007)
Jan 10 10:44:15 server kernel: RocketRAID 3xxx SATA Controller driver v1.0 (060426)
Jan 10 10:44:15 server kernel: st: Version 20070203, fixed bufsize 32768, s/g segs 256
Jan 10 10:44:15 server kernel: sata_sis 0000:00:05.0: version 0.7
Jan 10 10:44:15 server kernel: ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 16
Jan 10 10:44:15 server kernel: sata_sis 0000:00:05.0: Detected SiS 180/181/964 chipset in SATA mode
Jan 10 10:44:15 server kernel: ata1: SATA max UDMA/133 cmd 0x00019c00 ctl 0x0001a002 bmdma 0x0001ac00 irq 16
Jan 10 10:44:15 server kernel: ata2: SATA max UDMA/133 cmd 0x0001a400 ctl 0x0001a802 bmdma 0x0001ac08 irq 16
Jan 10 10:44:15 server kernel: scsi2 : sata_sis
Jan 10 10:44:15 server kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 10 10:44:15 server kernel: ata1.00: ATA-7: MAXTOR STM3160215AS, 3.AAD, max UDMA/133
Jan 10 10:44:15 server kernel: ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
Jan 10 10:44:15 server kernel: ata1.00: configured for UDMA/133
Jan 10 10:44:15 server kernel: scsi3 : sata_sis
Jan 10 10:44:15 server kernel: ata2: SATA link down (SStatus 0 SControl 300)
Jan 10 10:44:15 server kernel: scsi 2:0:0:0: Direct-Access ATA MAXTOR STM316021 3.AA PQ: 0 ANSI: 5
Jan 10 10:44:15 server kernel: SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
Jan 10 10:44:15 server kernel: sda: Write Protect is off
Jan 10 10:44:15 server kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan 10 10:44:15 server kernel: SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
Jan 10 10:44:15 server kernel: sda: Write Protect is off
Jan 10 10:44:15 server kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan 10 10:44:15 server kernel: sda: sda1 sda2 sda3
Jan 10 10:44:15 server kernel: sd 2:0:0:0: Attached scsi disk sda
Jan 10 10:44:15 server kernel: I2O subsystem v1.325
Jan 10 10:44:15 server kernel: i2o: max drivers = 8
Jan 10 10:44:15 server kernel: I2O Configuration OSM v1.323
Jan 10 10:44:15 server kernel: I2O Bus Adapter OSM v1.317
Jan 10 10:44:15 server kernel: I2O Block Device OSM v1.325
Jan 10 10:44:15 server kernel: I2O SCSI Peripheral OSM v1.316
Jan 10 10:44:15 server kernel: I2O ProcFS OSM v1.316
Jan 10 10:44:15 server kernel: Fusion MPT base driver 3.04.04
Jan 10 10:44:15 server kernel: Copyright (c) 1999-2007 LSI Logic Corporation
Jan 10 10:44:15 server kernel: Fusion MPT SPI Host driver 3.04.04
Jan 10 10:44:15 server kernel: Fusion MPT FC Host driver 3.04.04
Jan 10 10:44:15 server kernel: Fusion MPT SAS Host driver 3.04.04
Jan 10 10:44:15 server kernel: usbmon: debugfs is not available
Jan 10 10:44:15 server kernel: ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 18
Jan 10 10:44:15 server kernel: ehci_hcd 0000:00:03.3: EHCI Host Controller
Jan 10 10:44:15 server kernel: ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
Jan 10 10:44:15 server kernel: ehci_hcd 0000:00:03.3: irq 18, io mem 0xe7002000
Jan 10 10:44:15 server kernel: ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jan 10 10:44:15 server kernel: usb usb1: configuration #1 chosen from 1 choice
Jan 10 10:44:15 server kernel: hub 1-0:1.0: USB hub found
Jan 10 10:44:15 server kernel: hub 1-0:1.0: 8 ports detected
Jan 10 10:44:15 server kernel: ACPI: PCI Interrupt 0000:00:09.2[C] -> GSI 19 (level, low) -> IRQ 19
Jan 10 10:44:15 server kernel: ehci_hcd 0000:00:09.2: EHCI Host Controller
Jan 10 10:44:15 server kernel: ehci_hcd 0000:00:09.2: new USB bus registered, assigned bus number 2
Jan 10 10:44:15 server kernel: ehci_hcd 0000:00:09.2: irq 19, io mem 0xe7006000
Jan 10 10:44:15 server kernel: ehci_hcd 0000:00:09.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jan 10 10:44:15 server kernel: usb usb2: configuration #1 chosen from 1 choice
Jan 10 10:44:15 server kernel: hub 2-0:1.0: USB hub found
Jan 10 10:44:15 server kernel: hub 2-0:1.0: 4 ports detected
Jan 10 10:44:15 server kernel: 116x: driver isp116x-hcd, 03 Nov 2005
Jan 10 10:44:15 server kernel: ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 20
Jan 10 10:44:15 server kernel: ohci_hcd 0000:00:03.0: OHCI Host Controller
Jan 10 10:44:15 server kernel: ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 3
Jan 10 10:44:15 server kernel: ohci_hcd 0000:00:03.0: irq 20, io mem 0xe7004000
Jan 10 10:44:15 server kernel: usb usb3: configuration #1 chosen from 1 choice
Jan 10 10:44:15 server kernel: hub 3-0:1.0: USB hub found
Jan 10 10:44:15 server kernel: hub 3-0:1.0: 3 ports detected
Jan 10 10:44:15 server kernel: ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 21
Jan 10 10:44:15 server kernel: ohci_hcd 0000:00:03.1: OHCI Host Controller
Jan 10 10:44:15 server kernel: ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 4
Jan 10 10:44:15 server kernel: ohci_hcd 0000:00:03.1: irq 21, io mem 0xe7000000
Jan 10 10:44:15 server kernel: usb usb4: configuration #1 chosen from 1 choice
Jan 10 10:44:15 server kernel: hub 4-0:1.0: USB hub found
Jan 10 10:44:15 server kernel: hub 4-0:1.0: 3 ports detected
Jan 10 10:44:15 server kernel: ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 22
Jan 10 10:44:15 server kernel: ohci_hcd 0000:00:03.2: OHCI Host Controller
Jan 10 10:44:15 server kernel: ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 5
Jan 10 10:44:15 server kernel: ohci_hcd 0000:00:03.2: irq 22, io mem 0xe7001000
Jan 10 10:44:15 server kernel: usb usb5: configuration #1 chosen from 1 choice
Jan 10 10:44:15 server kernel: hub 5-0:1.0: USB hub found
Jan 10 10:44:15 server kernel: hub 5-0:1.0: 2 ports detected
Jan 10 10:44:15 server kernel: USB Universal Host Controller Interface driver v3.0
Jan 10 10:44:15 server kernel: ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 16
Jan 10 10:44:15 server kernel: uhci_hcd 0000:00:09.0: UHCI Host Controller
Jan 10 10:44:15 server kernel: uhci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 6
Jan 10 10:44:15 server kernel: uhci_hcd 0000:00:09.0: irq 16, io base 0x0000b800
Jan 10 10:44:15 server kernel: usb usb6: configuration #1 chosen from 1 choice
Jan 10 10:44:15 server kernel: hub 6-0:1.0: USB hub found
Jan 10 10:44:15 server kernel: hub 6-0:1.0: 2 ports detected
Jan 10 10:44:15 server kernel: ACPI: PCI Interrupt 0000:00:09.1[B] -> GSI 18 (level, low) -> IRQ 23
Jan 10 10:44:15 server kernel: uhci_hcd 0000:00:09.1: UHCI Host Controller
Jan 10 10:44:15 server kernel: uhci_hcd 0000:00:09.1: new USB bus registered, assigned bus number 7
Jan 10 10:44:15 server kernel: uhci_hcd 0000:00:09.1: irq 23, io base 0x0000bc00
Jan 10 10:44:15 server kernel: usb usb7: configuration #1 chosen from 1 choice
Jan 10 10:44:15 server kernel: hub 7-0:1.0: USB hub found
Jan 10 10:44:15 server kernel: hub 7-0:1.0: 2 ports detected
Jan 10 10:44:15 server kernel: sl811: driver sl811-hcd, 19 May 2005
Jan 10 10:44:15 server kernel: Initializing USB Mass Storage driver...
Jan 10 10:44:15 server kernel: usb 3-1: new low speed USB device using ohci_hcd and address 2
Jan 10 10:44:15 server kernel: usb 3-1: configuration #1 chosen from 1 choice
Jan 10 10:44:15 server kernel: usb 4-1: new low speed USB device using ohci_hcd and address 2
Jan 10 10:44:15 server kernel: usb 4-1: configuration #1 chosen from 1 choice
Jan 10 10:44:15 server kernel: usb 5-1: new full speed USB device using ohci_hcd and address 2
Jan 10 10:44:15 server kernel: usb 5-1: configuration #1 chosen from 1 choice
Jan 10 10:44:15 server kernel: usb 7-1: new full speed USB device using uhci_hcd and address 2
Jan 10 10:44:15 server kernel: usb 7-1: configuration #1 chosen from 1 choice
Jan 10 10:44:15 server kernel: usbcore: registered new interface driver usb-storage
Jan 10 10:44:15 server kernel: USB Mass Storage support registered.
Jan 10 10:44:15 server kernel: usbcore: registered new interface driver hiddev
Jan 10 10:44:15 server kernel: input: Darfon USB Optical Mouse as /class/input/input1
Jan 10 10:44:15 server kernel: input: USB HID v1.10 Mouse [Darfon USB Optical Mouse] on usb-0000:00:03.0-1
Jan 10 10:44:15 server kernel: hiddev96: USB HID v1.00 Device [American Power Conversion Back-UPS 500 FW: 6.4.I USB FW: c1 ] on usb-0000:00:03.1-1
Jan 10 10:44:15 server kernel: usbcore: registered new interface driver usbhid
Jan 10 10:44:15 server kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Jan 10 10:44:15 server kernel: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Jan 10 10:44:15 server kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Jan 10 10:44:15 server kernel: mice: PS/2 mouse device common for all mice
Jan 10 10:44:15 server kernel: md: linear personality registered for level -1
Jan 10 10:44:15 server kernel: md: raid0 personality registered for level 0
Jan 10 10:44:15 server kernel: md: raid1 personality registered for level 1
Jan 10 10:44:15 server kernel: md: raid10 personality registered for level 10
Jan 10 10:44:15 server kernel: md: raid6 personality registered for level 6
Jan 10 10:44:15 server kernel: md: raid5 personality registered for level 5
Jan 10 10:44:15 server kernel: md: raid4 personality registered for level 4
Jan 10 10:44:15 server kernel: raid5: automatically using best checksumming function: pIII_sse
Jan 10 10:44:15 server kernel: md: multipath personality registered for level -4
Jan 10 10:44:15 server kernel: device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
Jan 10 10:44:15 server kernel: TCP cubic registered
Jan 10 10:44:15 server kernel: Initializing XFRM netlink socket
Jan 10 10:44:15 server kernel: NET: Registered protocol family 1
Jan 10 10:44:15 server kernel: NET: Registered protocol family 17
Jan 10 10:44:15 server kernel: input: AT Translated Set 2 keyboard as /class/input/input2
Jan 10 10:44:15 server kernel: md: Autodetecting RAID arrays.
Jan 10 10:44:15 server kernel: md: autorun ...
Jan 10 10:44:15 server kernel: md: ... autorun DONE.
Jan 10 10:44:15 server kernel: EXT3-fs: INFO: recovery required on readonly filesystem.
Jan 10 10:44:15 server kernel: EXT3-fs: write access will be enabled during recovery.
Jan 10 10:44:15 server kernel: kjournald starting. Commit interval 5 seconds
Jan 10 10:44:15 server kernel: EXT3-fs: recovery complete.
Jan 10 10:44:15 server kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 10 10:44:15 server kernel: Freeing unused kernel memory: 392k freed
Jan 10 10:44:15 server kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Jan 10 10:44:15 server kernel: Linux agpgart interface v0.102 (c) Dave Jones
Jan 10 10:44:15 server kernel: sis900.c: v1.08.10 Apr. 2 2006
Jan 10 10:44:15 server kernel: ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 19
Jan 10 10:44:15 server kernel: 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
Jan 10 10:44:15 server kernel: 0000:00:04.0: Using transceiver found at address 1 as default
Jan 10 10:44:15 server kernel: eth0: SiS 900 PCI Fast Ethernet at 0x9800, IRQ 19, 00:11:d8:23:a8:38.
Jan 10 10:44:15 server kernel: via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
Jan 10 10:44:15 server kernel: ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 16 (level, low) -> IRQ 17
Jan 10 10:44:15 server kernel: eth1: VIA Rhine II at 0xe7005000, 00:05:5d:09:9a:5c, IRQ 17.
Jan 10 10:44:15 server kernel: eth1: MII PHY found at address 8, status 0x7809 advertising 01e1 Link 0000.
Jan 10 10:44:15 server kernel: agpgart: Detected SiS 760 chipset
Jan 10 10:44:15 server kernel: agpgart: AGP aperture is 4M @ 0xe0000000
Jan 10 10:44:15 server kernel: gameport: EMU10K1 is pci0000:00:0a.1/gameport0, io 0xc800, speed 1217kHz
Jan 10 10:44:15 server kernel: sd 2:0:0:0: Attached scsi generic sg0 type 0
Jan 10 10:44:15 server kernel: ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 23
Jan 10 10:44:15 server kernel: ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 23
Jan 10 10:44:15 server kernel: intel8x0_measure_ac97_clock: measured 53811 usecs
Jan 10 10:44:15 server kernel: intel8x0: clocking to 48000
Jan 10 10:44:15 server kernel: ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17
Jan 10 10:44:15 server kernel: Bluetooth: Core ver 2.11
Jan 10 10:44:15 server kernel: NET: Registered protocol family 31
Jan 10 10:44:15 server kernel: Bluetooth: HCI device and connection manager initialized
Jan 10 10:44:15 server kernel: Bluetooth: HCI socket layer initialized
Jan 10 10:44:15 server kernel: Linux video capture interface: v2.00
Jan 10 10:44:15 server kernel: Bluetooth: HCI USB driver ver 2.9
Jan 10 10:44:15 server kernel: usbcore: registered new interface driver hci_usb
Jan 10 10:44:15 server kernel: /home/sardylan/Desktop/download/gspcav1-20071224/gspca_core.c: USB GSPCA camera found. (PAC207)
Jan 10 10:44:15 server kernel: /home/sardylan/Desktop/download/gspcav1-20071224/gspca_core.c: [spca5xx_probe:4275] Camera type GBRG
Jan 10 10:44:15 server kernel: /home/sardylan/Desktop/download/gspcav1-20071224/gspca_core.c: [spca5xx_getcapability:1249] maxw 352 maxh 288 minw 160 minh 120
Jan 10 10:44:15 server kernel: usbcore: registered new interface driver gspca
Jan 10 10:44:15 server kernel: /home/sardylan/Desktop/download/gspcav1-20071224/gspca_core.c: gspca driver 01.00.20 registered
Jan 10 10:44:15 server kernel: Adding 1052248k swap on /dev/sda3. Priority:-1 extents:1 across:1052248k
Jan 10 10:44:15 server kernel: EXT3 FS on sda2, internal journal
Jan 10 10:44:15 server kernel: parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
Jan 10 10:44:15 server kernel: lp0: using parport0 (interrupt-driven).
Jan 10 10:44:15 server kernel: lp0: console ready
Jan 10 10:44:15 server kernel: Capability LSM initialized
Jan 10 10:44:15 server kernel: powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (version 2.00.00)
Jan 10 10:44:15 server kernel: powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x2
Jan 10 10:44:15 server kernel: powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x6
Jan 10 10:44:15 server kernel: powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xa
Jan 10 10:44:15 server kernel: input: Power Button (FF) as /class/input/input3
Jan 10 10:44:15 server kernel: ACPI: Power Button (FF) [PWRF]
Jan 10 10:44:15 server kernel: input: Power Button (CM) as /class/input/input4
Jan 10 10:44:15 server kernel: ACPI: Power Button (CM) [PWRB]
Jan 10 10:44:15 server kernel: input: Sleep Button (CM) as /class/input/input5
Jan 10 10:44:15 server kernel: ACPI: Sleep Button (CM) [FUTS]
Jan 10 10:44:15 server kernel: No dock devices found.
Jan 10 10:44:15 server kernel: ACPI: Fan [FAN] (on)
Jan 10 10:44:15 server kernel: ACPI: Thermal Zone [THRM] (40 C)
Jan 10 10:44:15 server kernel: kjournald starting. Commit interval 5 seconds
Jan 10 10:44:15 server kernel: EXT3 FS on hdc1, internal journal
Jan 10 10:44:15 server kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 10 10:44:15 server kernel: NTFS volume version 3.1.
Jan 10 10:44:16 server logger: /etc/rc.d/rc.inet1: /sbin/ifconfig eth0 192.168.0.1 broadcast 192.168.0.255 netmask 255.255.255.0
Jan 10 10:44:16 server logger: /etc/rc.d/rc.inet1: /sbin/ifconfig eth1 192.168.1.1 broadcast 192.168.1.255 netmask 255.255.255.0
Jan 10 10:44:16 server kernel: eth1: link down
Jan 10 10:44:16 server logger: /etc/rc.d/rc.inet1: /sbin/route add default gw 192.168.0.254 metric 1
Jan 10 10:44:16 server logger: /etc/rc.d/rc.inet1: /sbin/route add default gw 192.168.0.254 metric 1
Jan 10 10:44:16 server logger: SIOCADDRT: File exists
Jan 10 10:44:16 server logger: /etc/rc.d/rc.inet1: /sbin/ifconfig lo 127.0.0.1
Jan 10 10:44:16 server logger: /etc/rc.d/rc.inet1: /sbin/route add -net 127.0.0.0 netmask 255.0.0.0 lo
Jan 10 10:44:18 server kernel: NET: Registered protocol family 10
Jan 10 10:44:18 server kernel: lo: Disabled Privacy Extensions
Jan 10 10:44:18 server kernel: ADDRCONF(NETDEV_UP): eth1: link is not ready
Jan 10 10:44:18 server sshd[3257]: Server listening on :: port 22.
Jan 10 10:44:18 server kernel: eth0: Media Link On 100mbps full-duplex
Jan 10 10:44:28 server hcid[3317]: Bluetooth HCI daemon
Jan 10 10:44:28 server sdpd[3319]: Bluetooth SDP daemon
Jan 10 10:44:28 server sdpd[3319]: Starting SDP server
Jan 10 10:44:28 server hcid[3317]: HCI dev 0 registered
Jan 10 10:44:28 server hcid[3317]: HCI dev 0 up
Jan 10 10:44:28 server hcid[3317]: Device hci0 has been added
Jan 10 10:44:28 server kernel: Bluetooth: L2CAP ver 2.8
Jan 10 10:44:28 server kernel: Bluetooth: L2CAP socket layer initialized
Jan 10 10:44:28 server modprobe: WARNING: Error inserting usbhid (/lib/modules/2.6.21.5-smp/kernel/drivers/usb/input/usbhid.ko): Invalid module format
Jan 10 10:44:28 server input[3324]: Bluetooth Input daemon
Jan 10 10:44:28 server input[3324]: Registered input manager path:/org/bluez/input
Jan 10 10:44:29 server hcid[3317]: Starting security manager 0
Jan 10 10:44:29 server hcid[3317]: Device hci0 has been activated
Jan 10 10:44:29 server kernel: Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Jan 10 10:44:29 server hcid[3317]: return_link_keys (sba=00:0B:0D:21:DC:FC, dba=00:00:00:00:00:00)
Jan 10 10:44:29 server hcid[3317]: return_link_keys (sba=00:0B:0D:21:DC:FC, dba=00:00:00:00:00:00)
Jan 10 10:44:38 server /usr/sbin/gpm[3403]: *** info [startup.c(95)]:
Jan 10 10:44:38 server /usr/sbin/gpm[3403]: Started gpm successfully. Entered daemon mode.
Jan 10 10:44:38 server /usr/sbin/gpm[3403]: *** info [mice.c(1766)]:
Jan 10 10:44:38 server /usr/sbin/gpm[3403]: imps2: Auto-detected intellimouse PS/2
Jan 10 10:44:38 server kernel: Time: acpi_pm clocksource has been installed.
Jan 10 10:44:58 server kernel: agpgart: Found an AGP 3.1 compliant device at 0000:00:00.0.
Jan 10 10:44:58 server kernel: agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
Jan 10 10:44:58 server kernel: agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
Jan 10 10:45:20 server gconfd (sardylan-3597): starting (version 2.18.0.1), pid 3597 user 'sardylan'
Jan 10 10:45:20 server gconfd (sardylan-3597): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
Jan 10 10:45:20 server gconfd (sardylan-3597): Resolved address "xml:readwrite:/home/sardylan/.gconf" to a writable configuration source at position 1
Jan 10 10:45:20 server gconfd (sardylan-3597): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2
Jan 10 11:04:15 server -- MARK --
Jan 10 11:24:15 server -- MARK --
Jan 10 11:40:49 server gconfd (sardylan-3597): Received signal 15, shutting down cleanly
Jan 10 11:40:49 server gconfd (sardylan-3597): Exiting
Jan 10 11:40:49 server /usr/sbin/gpm[3403]: *** info [mice.c(1766)]:
Jan 10 11:40:49 server /usr/sbin/gpm[3403]: imps2: Auto-detected intellimouse PS/2