Compiz su Slackware 12.0

[giljubal]

Ciao ragazzi,
è da un bel po che segue il vostro ed stato di gran aiuto, fino adesso ho installado compiz senza nessun problema, soltanto che volevo installare e plugings dei compiz quelli extra, ma mi da il seguente errore:

root@slackware:~/3d# ls
3d.c 3d.xml.in Makefile plugin.info
root@slackware:~/3d# make
convert : 3d.xml.in -> build/3d.xml
bcop'ing : build/3d.xml -> build/3d_options.h
bcop'ing : build/3d.xml -> build/3d_options.c
schema'ing: build/3d.xml -> build/compiz-3d.schemawarning: failed to load external entity "/schemas.xslt"
cannot parse /schemas.xslt
make: *** [build/compiz-3d.schema] Error 4

qualcuno mi può dare un mano..
Grazie

[serevi]

@aLvArO
Ottimo! Premetto che non posso verificare se funziona ciò che ti suggerirò, però se puoi prova.
Praticamente, nel Makefile non c'è scritto di installare il plugin (lib3d.so) in /usr/local/lib/compiz, ma te lo ha installato (copiato) in /root/.compiz/plugins, quindi è normale che compiz non te lo trovi.
Soluzione:
# ln -s /root/.compiz/plugins/lib3d.so /usr/local/lib/compiz/lib3d.so
# ln -s /root/.compiz/metadata/3d.xml /usr/local/share/compiz/3d.xml

@giljubal
quel plugin cerca anche compiz-gconf, che probabilmente non hai compilato con compiz.0.5.1, (vedi ./configure di compiz). Però non ho capito se hai installato i plugins extra con il git-clone git://anongit.opencompositing.org/fusion/plugins-extra (in quel ramo di sorgenti ci sono praticamente tutti i plugins più famosi).

Ciao

[ekxius]

ciao a tutti!

qualcuno di voi si è già compilato openoffice-it? io ogni volta che lancio una sua applicazione compiz va in crash facendo sparire i bordi delle finestre e lo devo sempre riavviare...

capita anche a voi?

[aLvArO]

non ho provato ma proverò dove hai preso openoffice per la 12?

comunque il plugin 3d nn funziona ecco l'errore:
usr/local/bin/compiz (core) - Error: '3d' plugin must be loaded before 'cube' plugin
/usr/local/bin/compiz (core) - Error: Can't activate '3d' plugin due to dependency problems

[ekxius]

ho preso i sorgenti e me lo sono compilato con lo slackbuild

fatemi sapere

ciao a tutti

[danix]

comunque il plugin 3d nn funziona ecco l'errore:
usr/local/bin/compiz (core) - Error: '3d' plugin must be loaded before 'cube' plugin
/usr/local/bin/compiz (core) - Error: Can't activate '3d' plugin due to dependency problems

basta che in .compiz/options/general-allscreen.conf metti 3d prima di cube e vedrai che funziona...

Ciau

[aLvArO]

infatti avevi ragione....
ma voi riuscite a fare le foto o cose somili?
e con che comando?

[danix]

infatti avevi ragione....
ma voi riuscite a fare le foto o cose somili?
e con che comando?

Se il plugin screenshot è attivato puoi guardare il suo file di configurazione, sennò puoi avviare ksnapshot e fargli fare una foto del desktop con un ritardo di 4 o 5 secondi, premi scatta e poi metti il cubo come vuoi e gli fai fare la foto... io faccio così di solito...

Ciau

[aLvArO]

danix85 visto che ci sei mi dicise ti funziona l'effetto snow ho seguito le stesse cose che ho fatto per il 3d ma nn va è l'unico che nn funziona hihih anche se mi ritengo ormai molto soddisfatto :P

[submax82]

appena sistemo il tool per compilare compiz lo pubblico...

[giljubal]

Ciao serevei, grazie per la risposta,
ho usato git-clone git://anongit.opencompositing.org/fusion/plugins/3d
per scaricare il plugins 3d e cosi vedere se potevo installarlo ma mi da l'errore di prima.
Come faccio per installare, o compilare, compiz-gconf.
grazie

@giljubal
quel plugin cerca anche compiz-gconf, che probabilmente non hai compilato con compiz.0.5.1, (vedi ./configure di compiz). Però non ho capito se hai installato i plugins extra con il git-clone git://anongit.opencompositing.org/fusion/plugins-extra (in quel ramo di sorgenti ci sono praticamente tutti i plugins più famosi).

Ciao

[aLvArO]

ma questo pakketto lo hai http://gnome.slacky.eu/gnome/12.0/2.18. ... 86-4as.tgz ?

[Zav0k]

Salve a tutti, ho installato una slack 12, ma ho dei problemi a far partire l'accellerazione grafica con i driver open su una ati x600 (visto che con quelli closed non funziona ) e di conseguenza anche compiz non parte .
Ho fatto varie prove ma non riesco a capire perchè mi restituisce sempre direct rendering: no .
Vi ringrazio dell'aiuto, ecco il mio xorg.conf:

Codice: Seleziona tutto

Section "Module"

# This loads the DBE extension module.

    Load        "dbe"  	# Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the font modules
#    Load        "type1"
    Load        "freetype"
#    Load        "xtt"

# This loads the GLX module
    Load       "glx"
# This loads the DRI module
    Load       "dri"

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

#    RgbPath	"/usr/share/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# 
# 

    FontPath   "/usr/share/fonts/TTF"
    FontPath   "/usr/share/fonts/OTF"
    FontPath   "/usr/share/fonts/Type1"
    FontPath   "/usr/share/fonts/misc"
    FontPath   "/usr/share/fonts/75dpi/:unscaled"
#    FontPath   "/usr/lib/X11/fonts/local/"
    FontPath   "/usr/lib/X11/fonts/misc/"
    FontPath   "/usr/lib/X11/fonts/75dpi/:unscaled"
    FontPath   "/usr/lib/X11/fonts/100dpi/:unscaled"
    FontPath   "/usr/lib/X11/fonts/Speedo/"
    FontPath   "/usr/lib/X11/fonts/Type1/"
    FontPath   "/usr/lib/X11/fonts/TTF/"
    FontPath   "/usr/lib/X11/fonts/OTF/"
    FontPath   "/usr/lib/X11/fonts/cyrillic/"
    FontPath   "/usr/lib/X11/fonts/75dpi/"
    FontPath   "/usr/lib/X11/fonts/100dpi/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/lib/xorg/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is 
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.

#    Option "DontVTSwitch"

# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client. 

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings. 

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier	"Keyboard1"
    Driver	"kbd"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option     "Protocol"      "Xqueue"

    Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option	"Xleds"      "1 2 3"

#    Option "LeftAlt"     "Meta"
#    Option "RightAlt"    "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"    "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"   "de"
# or:
#    Option "XkbLayout"   "de"
#    Option "XkbVariant"  "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions"  "ctrl:swapcaps"

# These are the default XKB settings for Xorg
#    Option "XkbRules"    "xorg"
#    Option "XkbModel"    "pc105"
#    Option "XkbLayout"   "us"
#    Option "XkbVariant"  ""
#    Option "XkbOptions"  ""

#    Option "XkbDisable"

    Option "XkbRules"	"xorg"
    Option "XkbModel"	"pc105"
    Option "XkbLayout"	"it"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier	"Mouse1"
    Driver	"mouse"
    Option "Protocol"    "IMPS/2"	# IntelliMouse PS/2
    Option "Device"      "/dev/input/mice"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"	"Xqueue"

# Mouse-speed setting for PS/2 mouse.

#    Option "Resolution"	"256"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"	"9600"
#    Option "SampleRate"	"150"

# Mouse wheel mapping.  Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7.   Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.

    Option "ZAxisMapping"   "4 5 6 7"

# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections 
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice" 
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier  "My Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync   31.5 - 57.0

#    HorizSync	30-64         # multisync
#    HorizSync	31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync	15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 50-70

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier	"Standard VGA"
    VendorName	"Unknown"
    BoardName	"Unknown"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset	"generic"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver     "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# intalled.

#    BusID      "PCI:0:10:0"

#    VideoRam	256

#    Clocks	25.2 28.3

EndSection

# Device configured by xorgconfig:

Section "Device"
    Identifier  "** ATI Radeon (generic)               [radeon]"
    Driver      "radeon"
    #VideoRam    262144
    # Insert Clocks lines here if appropriate
    	Option "AGPMode" "8"
	Option "AGPFastWrite" "true"
	Option "RenderAccel" "true"
	Option "backingstore" "true" 
EndSection


# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen 1"
    Device      "** ATI Radeon (generic)               [radeon]"
    Monitor     "My Monitor"
    DefaultDepth 24

    Subsection "Display"
        Depth       8
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.

    Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

Section "DRI"
    Mode 0666
EndSection

Section "Extensions"
Option "Composite" "True"
#Option "RENDER" "Enable"
#Option "DAMAGE" "true"
EndSection
 

[slucky]

Leggiti il post di alessiodf nella prima pagina di questo topic, e aggiungi tutte quelle opzioni al tuo xorg.conf, mi pare che anche l'autore ha una ati e poi riprova e vedi se funziona

Ciao

[giljubal]

Si ho installato gconf-2

ma questo pakketto lo hai http://gnome.slacky.eu/gnome/12.0/2.18. ... 86-4as.tgz ?