Scarico il File PACKAGES dei Pacchetti Extra... FALLITO!

sunreal · Messaggio da **sunreal** » mar 10 lug 2007, 9:34

Durante swaret --update mi compare una riga con questo errore :
### Scarico il File PACKAGES dei Pacchetti Extra... FALLITO!
A cosa può essere dovuto?

red · Messaggio da **red** » mar 10 lug 2007, 10:19

Guarda, Swaret non lo uso più perché mi sono stancato delle sue uscite (di questo tipo), tuttavia, per non saper né leggere né scrivere dico che mi pare un problema del server... tipo tempi di attesa troppo lunghi, non c'è risposta o non c'è corrispondenza tra quello che crede di dover trovare e quello che invece c'è fisicamente. Intendo magari lui sa che ci deve essere un package che si chiama "gatto", ma il file è stato chiamato "gatto1" e ti dà il problema.

Ne ho sparate un po', ma di preciso non saprei

_NYTRO_ · Messaggio da **_NYTRO_** » mar 10 lug 2007, 10:33

Controlla i link ROOT.

Codice: Seleziona tutto

ROOT=http://sunsite.cnlab-switch.ch/ftp/mirror/slackware/slackware-$VERSION
ROOT=http://www.slackware.no/slackware/slackware-$VERSION
ROOT=ftp://ftp.slackware.at/slackware-$VERSION
ROOT=http://www.slackware.at/data/slackware-$VERSION
ROOT=ftp://ftp.planetmirror.com/pub/slackware/slackware-$VERSION

Questi a me vanno..

acrive · Messaggio da **acrive** » mar 10 lug 2007, 13:24

Prova ad aumentare il TIMEOUT e RETRIES in swaret.conf. Il server è lento.

sunreal · Messaggio da **sunreal** » mar 10 lug 2007, 14:21

acrive ha scritto:Prova ad aumentare il TIMEOUT e RETRIES in swaret.conf. Il server è lento.

TIMEOUT 90
RETRIES 15

Nulla è cambiato

acrive · Messaggio da **acrive** » mar 10 lug 2007, 14:31

huh.. allora nn saprei che dirti.. a me oggi funzia..

sunreal · Messaggio da **sunreal** » mar 10 lug 2007, 20:13

acrive ha scritto:huh.. allora nn saprei che dirti.. a me oggi funzia..

posteresti il tuo swaret.conf?

acrive · Messaggio da **acrive** » mer 11 lug 2007, 22:41

Dubito che possa esserti utile.. Comunque l'unica modifica che faccio è l'aggiunta del repos di slack e di 12.0 a version (rispetto all'originale).

Rimango del parere che sia un problema di lentezza... Perchè a me capità più spesso quando sono in Puglia con la connessione a 1mbit che con quella che ho ora a 10mbit.

Codice: Seleziona tutto

###########################################################
#
# swaret.conf, Version: 1.6.3
#
### /etc/swaret.conf - SWARET EXAMPLE CONFIGURATION FILE ###
#
# Define a valid Slackware Linux Version.
# (Used for Dependency Support and other Features)
#
# NOTE: If you want to use Slackware Linux Current,
#       set VERSION to 'current' (VERSION=current).
#
VERSION=12.0
#
# Define the language for status and error messages
LANGUAGE=ENGLISH
#
# ----------------------------------------------------------
# Define Slackware (8.1 or Higher or Current) Linux Mirrors.
# (Used for Official Slackware Linux Packages)
# (Slackware Linux Mirrors available at http://www.slackware.com)
#
# Syntax: ROOT=PROTOCOL:URL
#
# NOTE: swaret will use the order of the specified ROOT URL's.
#
#ROOT=file:/mnt/cdrom
#ROOT=file:/mnt/dvdrom
#ROOT=file:/mnt/usbmemstick
ROOT=ftp://ftp.nluug.nl/pub/os/Linux/distr/slackware/slackware-$VERSION
ROOT=http://sunsite.cnlab-switch.ch/ftp/mirror/slackware/slackware-$VERSION
ROOT=ftp://ftp.slackware.no/pub/linux/slackware/slackware-$VERSION
ROOT=http://www.slackware.no/slackware/slackware-$VERSION
ROOT=ftp://ftp.slackware.at/slackware-$VERSION
ROOT=http://www.slackware.at/data/slackware-$VERSION
ROOT=ftp://ftp.planetmirror.com/pub/slackware/slackware-$VERSION
ROOT=http://ftp.planetmirror.com/pub/slackware/slackware-$VERSION
#ROOT=rsync://rsync.slackware.no/slackware/slackware-$VERSION
#ROOT=rsync://rsync.slackware.at/slackware/slackware-$VERSION
#ROOT=file:/pub/slackware
#ROOT=file:/mnt/nfsshare/slackware
#ROOT=file:/mnt/sambashare/slackware
#
# -----------------------------------------------------------
# Define Repository URL's with Slackware Linux Packages.
# (Used for Repository Slackware Linux Packages)
# (Repository URL's available at http://swaret.sourceforge.net and
#   at http://www.linuxpackages.net/mirrors.php)
#
# NOTE 1: To use a Local Repository or Remote Repository,
#         be sure it contains the following Files:
#         - CHECKSUMS.md5 (For MD5 Sum, REQUIRED)
#         - FILELIST.TXT (For Package Name + Size, REQUIRED)
#         - PACKAGES.TXT (For Package Description, NOT REQUIRED)
#         - MANIFEST.bz2 (For Dependency Support, NOT REQUIRED)
# NOTE 2: To create your own Repository, use 'swaret-tools'.
#         You can get 'swaret-tools' at http://swaret.sourceforge.net!
#
# Syntax: REPOS_ROOT=REPOSITORYNAME%PROTOCOL:URL
#
# NOTE 1: The REPOSITORY NAME can only be ONE Keyword!
# NOTE 2: swaret will use the order of the specified REPOS_ROOT URL's.
#
#REPOS_ROOT=LinuxPackagesDOTNET%http://www2.linuxpackages.net/packages/Slackware-10.0
#
#REPOS_ROOT=My_Slackware_Packages_On_CD-ROM%file:/mnt/cdrom
#REPOS_ROOT=My_Slackware_Packages_On_DVD-ROM%file:/mnt/dvdrom
#REPOS_ROOT=My_Slackware_Packages_On_USB_Memory_Stick%file:/mnt/usbmemstick
#REPOS_ROOT=SomeRemoteRepository%ftp://ftp.someremoterepository.net/slackware/slackware-10.0
#REPOS_ROOT=SomeRemoteRepository%http://www.someremoterepository.net/slackware/slackware-10.0
#REPOS_ROOT=SomeRemoteRepository%rsync://rsync.someremoterepository.net/slackware/slackware-10.0
REPOS_ROOT=Slacky.eu%http://www.slacky.eu/repository/slackware-12.0
#
# ------------------------------------------------------------
# Define Libraries (8.1 or Higher or Current) List Mirrors.
# (Used for Dependency Support)
#
# NOTE 1: You need to specify a Libraries List Mirror which
#         contains a 'libraries-VERSION' File.
#
# NOTE 2: To create the Libraries List, use 'swaret-tools'.
#         You can get 'swaret-tools' at http://swaret.sourceforge.net!
#         You can also clear all DEP_ROOT Variable(s) which will
#         allow swaret to create the Libraries List for you
#         during Dependency Check using the defined ROOT Variable(s) above.
#
# Syntax: DEP_ROOT=PROTOCOL:URL
#
# NOTE: swaret will use the order of the specified DEP_ROOT URL's.
#
DEP_ROOT=http://swaret.sourceforge.net
#DEP_ROOT=file:/mnt/cdrom
#DEP_ROOT=file:/mnt/dvdrom
#DEP_ROOT=file:/mnt/usbmemstick
#DEP_ROOT=file:/pub/swaret
#DEP_ROOT=file:/mnt/nfsshare/swaret
#DEP_ROOT=file:/mnt/sambashare/swaret
#
# ----------------------------------------------------------
# General Settings
#
# Do you want swaret to use Random Slackware Linux Mirrors?
# -> 1 for yes, 0 for no.
#
RANDOMR=0
#
# Do you want swaret to back-up your packages when upgradeing?
# -> If set to 1, old packages are backed up in $CACH_DIR/rollback.
#    Normally this is /var/swaret/rollback.  ROLLBACKMAX is the number
#    of "upgrades" that will be backed up before old backups will be
#    removed.  Turning on rollback means upgrading packages takes
#    longer, but it is more safe.
# -> If set to 0, swaret will not back up packages.
#
ROLLBACK=0
ROLLBACKMAX=3
#
# Do you want swaret to parse all the Package Descriptions?
# -> If set to 1, swaret will also match Packages whose Description
#    is matching the Keyword(s) you specify after --ACTION.
#    NOTE: swaret will parse all the Package Descriptions for this,
#          and might slow down swaret when using an older System.
# -> If set to 0, swaret will not use Package Descriptions
#    to match one or more Packages.
#
USEPKGDESC=0
#
# If you don't want swaret to Upgrade, Install, Re-Install, Download,...
# some Packages, add the KEYWORDS to the EXCLUDE Variable.
# To disable Exclude Method: swaret --exclude -off
# To enable Exclude Method: swaret --exclude -on
#
# NOTE: You can add ANY EXTENDED REGEXP (Regular Expression) to the EXCLUDE Variable(s)
#
# Basic Exclude
EXCLUDE=kernel alsa lilo
EXCLUDE=swaret
EXCLUDE=aaa_
EXCLUDE=MANIFEST.bz2$
EXCLUDE=.*dl$ .*PACKAGER$ .*MYBUILD$
#
# Advanced Exclude
# Syntax: KEYWORD[DONT_EXCLUDE_ME_KEYWORD1,DONT_EXCLUDE_ME_KEYWORD2,...]
# Example: kde-i18n[nl,en_GB] koffice-i18n[nl,en_GB]
#
#EXCLUDE=kde-i18n[nl,en_GB] koffice-i18n[nl,en_GB]
#
# Do you want to enable Dependency Check?
# -> If set to 1, swaret will start the Dependency Check after
#    every Upgrade, Install and Re-Install Procedure.
# -> If set to 0, swaret will not start the Dependency Check
#    after any Procedure.
#
DEPENDENCY=1
#
# Do you want swaret to Search for missing Libraries (and Fix)
# which could be found on your System, but not tracked by ldconfig?
# -> 1 for yes, 0 for no.
#
DSEARCHLIB=1
#
# Set to 1, if you want swaret to use the 'slocate' program
# to Search for missing Libraries.
# (be sure to issue the 'updatedb' Command regularly!)
# If DSEARCHM is set to 0, swaret will use
# the 'find' program to locate missing Libraries.
# -> 1 for yes, 0 for no.
#
DSEARCHM=0
#
# Start MD5 Check after Fetching Packages, Patches and Sources?
# -> 1 for yes, 0 for no.
#
MD5CHECK=1
#
# Start GPG Signature Check after Fetching Packages, Patches and Sources?
#
# NOTE: Check out F.A.Q. (--faq gpg) how to Import a Public GPG Key which
#       will be used by the GPG Signature Check.
#
# -> 1 for yes, 0 for no.
#
GPGCHECK=0
#
# Show Description for Packages during
# Upgrade, Install, Re-Install,... Procedures?
# -> If set to 0, you will not see a Description.
# -> If set to 1, you will see a Description.
#
DESC=0
#
# Cache Directory for (Repository) Packages and Sources.
#
CACHE_DIR=/var/swaret
#
# Enable Logging?
# -> 1 for yes, 0 for no.
#
LOG=1
#
# swaret Log File
#
LOG_FILE=/var/log/swaret
#
# Show Warnings?
# -> 1 for yes, 0 for no.
#
WARNINGS=1
#
# Show Information?
# -> 1 for yes, 0 for no.
#
INFORMATION=1
#
# -------------------------------------------------------------
# Network Settings
#
# Network Interface
# Use this if you have a Network Interface.
#
NIC=eth0
#
# Local Interface
# Use this if you do not have a Network Interface.
#
# For Example (CD-ROM):
# You got a Slackware Linux CD-ROM,
# mount the CD-ROM to /mnt/cdrom and
# set ROOT to 'file:/mnt/cdrom' in /etc/swaret.conf.
# Also, set NIC to 'lo' (Local Loop Device).
#
# NIC=lo
#
# Progress
# If set to 0, swaret will use the '%' Download Interface.
# If set to 1, swaret will use the 'size' Download Interface.
# If set to 2, swaret will use the 'wget/rsync' Download Interface.
#
PROGRESS=0
#
# Timeout for wget and/or rsync.
# -> Number of seconds for Timeout
#
TIMEOUT=35
#
# Retries for wget and/or rsync.
# -> Number of Retries
#
RETRIES=5
#
# Behind a Firewall? Using FTP Mirrors?
# -> 1 for yes, 0 for no
#
PASSIVE_FTP=1
#
# If you want HTTP or FTP Proxy Support,
# uncomment and Setup the following Variable:
#
# WGET_PROXY=http://IP or HOST:PORT
#
# If you want RSYNC Proxy Support,
# uncomment and Setup the following Variable:
#
# RSYNC_PROXY=IP or HOST:PORT
#
### /etc/swaret.conf - SWARET EXAMPLE CONFIGURATION FILE ###

sunreal · Messaggio da **sunreal** » gio 12 lug 2007, 8:09

acrive ha scritto:Dubito che possa esserti utile.. Comunque l'unica modifica che faccio è l'aggiunta del repos di slack e di 12.0 a version (rispetto all'originale).

Ed invece mi sei stato molto d'aiuto, in pratica io nel mio swaret.conf ho solo slacky abilitato come repository, ed è questo il problema, difatti se abilito altre fonti il problema scompare a patto che slacky non sia il primo della lista. A questo punto siccome io installo solo pacchetti di provenienza slacky mi tengo l'errore. Grazie mille, ciao.

acrive · Messaggio da **acrive** » ven 13 lug 2007, 10:10

Wow! Beh..Contento di averti aiutato!