All'inizio ho pensato si trattasse di un problema di permessi con crdao e cdrecord, allora li ho cambiati, ma continua a non scrivere...
Ho guardato l'output di debug e purtroppo mi è sembrato di capire che ci sia incompatibilità con il kernel di default della slack 12: 2.6.21.5-smp..
Ve lo posto così mi dite un po' cosa ne pensate:
Codice: Seleziona tutto
System
-----------------------
K3b Version: 1.0.3
KDE Version: 3.5.7
QT Version: 3.3.8
Kernel: 2.6.21.5-smp
Devices
-----------------------
HL-DT-ST DVD-ROM GDR8163B 0L23 (/dev/hdc, ) [CD-ROM, DVD-ROM] [DVD-ROM, CD-ROM] [Nessuno]
SONY DVD RW DRU-710A BY02 (/dev/hdd, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R sequenziale, DVD-RW a riscrittura limitata, DVD-RW sequenziale, DVD+RW, DVD+R, DVD+R a doppio strato, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Riscrittura limitata]
Used versions
-----------------------
cdrecord: 2.1.1a23
cdrecord
-----------------------
/usr/bin/cdrecord: Warning: Running on Linux-2.6.21.5-smp
/usr/bin/cdrecord: There are unsettled issues with Linux-2.5 and newer.
/usr/bin/cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
/usr/bin/cdrecord: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits./usr/bin/cdrecord: Cannot allocate memory. WARNING: Cannot do mlockall(2).
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
/usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
/usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
scsidev: '/dev/hdd'
devname: '/dev/hdd'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
SCSI buffer size: 64512
Text len: 1242
Cdrecord-ProDVD-Clone 2.01.01a23 (i686-pc-linux-gnu) Copyright (C) 1995-2006 Jörg Schilling
TOC Type: 0 = CD-DA
Using libscg version 'schily-0.9'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'SONY '
Identifikation : 'DVD RW DRU-710A '
Revision : 'BY02'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: CD-R
Profile: DVD+R/DL
Profile: DVD+R
Profile: DVD+RW
Profile: DVD-RW sequential overwrite
Profile: DVD-RW restricted overwrite
Profile: DVD-R sequential recording
Profile: DVD-ROM
Profile: CD-RW
Profile: CD-R (current)
Profile: CD-ROM
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1895168 = 1850 KB
FIFO size : 4194304 = 4096 KB
pregap1: -1
Track 01: audio 40 MB (03:59.73) no preemp swab copy
Track 02: audio 35 MB (03:33.81) no preemp swab copy
Track 03: audio 32 MB (03:14.28) no preemp swab copy
Track 04: audio 42 MB (04:09.81) no preemp swab copy
Track 05: audio 40 MB (03:59.62) no preemp swab copy
Track 06: audio 77 MB (07:40.54) no preemp swab copy
Track 07: audio 48 MB (04:49.92) no preemp swab copy
Track 08: audio 48 MB (04:45.46) no preemp swab copy
Track 09: audio 79 MB (07:49.61) no preemp swab copy
Track 10: audio 57 MB (05:44.12) no preemp swab copy
Track 11: audio 39 MB (03:52.24) no preemp swab copy
Track 12: audio 44 MB (04:24.46) no preemp swab copy
Track 13: audio 41 MB (04:05.29) no preemp swab copy pregapsize: 0
Track 14: audio 36 MB (03:38.05) no preemp swab copy
Track 15: audio 42 MB (04:09.97) no preemp swab copy
Track 16: audio 30 MB (03:02.81) no preemp swab copy
Track 17: audio 52 MB (05:10.24) no preemp swab copy
Total size: 788 MB (78:10.01) = 351751 sectors
/usr/bin/cdrecord: Operation not permitted. Cannot send SCSI cmd via ioctl
Lout start: 789 MB (78:12/01) = 351751 sectors
cdrecord command:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=/dev/hdd speed=32 -dao driveropts=burnfree textfile=/tmp/k3byTdZcb.dat -eject -useinfo -audio /tmp/kde-alby/k3b_audio_0_01.inf /tmp/kde-alby/k3b_audio_0_02.inf /tmp/kde-alby/k3b_audio_0_03.inf /tmp/kde-alby/k3b_audio_0_04.inf /tmp/kde-alby/k3b_audio_0_05.inf /tmp/kde-alby/k3b_audio_0_06.inf /tmp/kde-alby/k3b_audio_0_07.inf /tmp/kde-alby/k3b_audio_0_08.inf /tmp/kde-alby/k3b_audio_0_09.inf /tmp/kde-alby/k3b_audio_0_10.inf /tmp/kde-alby/k3b_audio_0_11.inf /tmp/kde-alby/k3b_audio_0_12.inf /tmp/kde-alby/k3b_audio_0_13.inf /tmp/kde-alby/k3b_audio_0_14.inf /tmp/kde-alby/k3b_audio_0_15.inf /tmp/kde-alby/k3b_audio_0_16.inf /tmp/kde-alby/k3b_audio_0_17.inf
Grazie mille!
