Per essere più chiara ecco il file /etc/lilo.conf della Debian
<BR>
<BR>
<BR># Support LBA for large hard disks.
<BR>#
<BR>lba32
<BR>
<BR>vga=791
<BR>
<BR># Overrides the default mapping between harddisk names and the BIOS´
<BR># harddisk order. Use with caution.
<BR>#disk=/dev/hde
<BR># bios=0x81
<BR>
<BR>#disk=/dev/sda
<BR># bios=0x80
<BR>
<BR># Specifies the boot device. This is where Lilo installs its boot
<BR># block. It can be either a partition, or the raw device, in which
<BR># case it installs in the MBR, and will overwrite the current MBR.
<BR>#
<BR>boot=/dev/hda
<BR>
<BR># Specifies the device that should be mounted as root. (`/´)
<BR>#
<BR>root=/dev/hda1
<BR>
<BR># Enable map compaction:
<BR># Tries to merge read requests for adjacent sectors into a single
<BR># read request. This drastically reduces load time and keeps the
<BR># map smaller. Using `compact´ is especially recommended when
<BR># booting from a floppy disk. It is disabled here by default
<BR># because it doesn´t always work.
<BR>#
<BR># compact
<BR># Installs the specified file as the new boot sector
<BR># You have the choice between: bmp, compat, menu and text
<BR># Look in /boot/ and in lilo.conf(5) manpage for details
<BR>#
<BR>install=/boot/boot-menu.b
<BR>
<BR># Specifies the location of the map file
<BR>#
<BR>map=/boot/map
<BR>
<BR># You can set a password here, and uncomment the `restricted´ lines
<BR># in the image definitions below to make it so that a password must
<BR># be typed to boot anything but a default configuration. If a
<BR># command line is given, other than one specified by an `append´
<BR># statement in `lilo.conf´, the password will be required, but a
<BR># standard default boot will not require one.
<BR>#
<BR># This will, for instance, prevent anyone with access to the
<BR># console from booting with something like `Linux init=/bin/sh´,
<BR># and thus becoming `root´ without proper authorization.
<BR>#
<BR># Note that if you really need this type of security, you will
<BR># likely also want to use `install-mbr´ to reconfigure the MBR
<BR># program, as well as set up your BIOS to disallow booting from
<BR># removable disk or CD-ROM, then put a password on getting into the
<BR># BIOS configuration as well. Please RTFM `install-mbr(8)´.
<BR>#
<BR># password=tatercounter2000
<BR>
<BR># Specifies the number of deciseconds (0.1 seconds) LILO should
<BR># wait before booting the first image.
<BR>#
<BR>delay=20
<BR> You can put a customized boot message up if you like. If you use
<BR># `prompt´, and this computer may need to reboot unattended, you
<BR># must specify a `timeout´, or it will sit there forever waiting
<BR># for a keypress. `single-key´ goes with the `alias´ lines in the
<BR># `image´ configurations below. eg: You can press `1´ to boot
<BR># `Linux´, `2´ to boot `LinuxOLD´, if you uncomment the `alias´.
<BR>#
<BR># message=/boot/bootmess.txt
<BR> prompt
<BR># single-key
<BR># delay=100
<BR> timeout=100
<BR>
<BR># Kernel command line options that apply to all installed images go
<BR># here. See: The `boot-prompt-HOWO´ and `kernel-parameters.txt´ in
<BR># the Linux kernel `Documentation´ directory.
<BR>#
<BR># append=""
<BR>append="hda=scsi hdb=scsi hdc=scsi hdd=scsi hde=scsi hdf=scsi hdg=scsi hdh=scsi noapic acpi=off apm=power-off"
<BR>
<BR># Boot up Linux by default.
<BR>#
<BR>default=Linux
<BR>image=/boot/vmlinuz-2.4.21-xfs
<BR> label=Linux
<BR> read-only
<BR># restricted
<BR># alias=1
<BR>
<BR>image=/vmlinuz.old
<BR> label=LinuxOLD
<BR> read-only
<BR> optional
<BR># restricted
<BR># alias=2
<BR>
<BR>#Avvio distro Slackware 9-1 ---------
<BR>
<BR>image=/boot/vmlinuz
<BR> label=Slack_9_1
<BR> root=/dev/hda6
<BR> read-only
<BR>
<BR># If you have another OS on this machine to boot, you can uncomment the
<BR># following lines, changing the device name on the `other´ line to
<BR># where your other OS´ partition is.
<BR># other=/dev/hda6
<BR># label=Slack9-1
<BR># read-only
<BR># restricted
<BR># alias=1
<BR>
<BR>SE AL PROMPT OPTO PER SLACK_9_1
<BR>ricevo il seguente messaggio:
<BR>
<BR>modprobe: can´t open dependencies file /lib/modules/2.4.21-xfs/modulesdep no suc file or directory
<BR>
<BR>COME / COSA FARE?
<BR>
<BR>GRAZIE A TUTTI
<BR>DADDA <br>
lilo.conf per più linux distros
Moderatore: Staff
Regole del forum
1) Citare sempre la versione di Slackware usata, la versione del Kernel e magari anche la versione della libreria coinvolta. Questi dati aiutano le persone che possono rispondere.
2) Per evitare confusione prego inserire in questo forum solo topic che riguardano appunto Gnu/Linux in genere, se l'argomento è specifico alla Slackware usate uno dei forum Slackware o Slackware64.
3) Leggere attentamente le risposte ricevute
4) Scrivere i messaggi con il colore di default, evitare altri colori.
5) Scrivere in Italiano o in Inglese, se possibile grammaticalmente corretto, evitate stili di scrittura poco chiari, quindi nessuna abbreviazione tipo telegramma o scrittura stile SMS o CHAT.
6) Appena registrati è consigliato presentarsi nel forum dedicato.
La non osservanza delle regole porta a provvedimenti di vari tipo da parte dello staff, in particolare la non osservanza della regola 5 porta alla cancellazione del post e alla segnalazione dell'utente. In caso di recidività l'utente rischia il ban temporaneo.
1) Citare sempre la versione di Slackware usata, la versione del Kernel e magari anche la versione della libreria coinvolta. Questi dati aiutano le persone che possono rispondere.
2) Per evitare confusione prego inserire in questo forum solo topic che riguardano appunto Gnu/Linux in genere, se l'argomento è specifico alla Slackware usate uno dei forum Slackware o Slackware64.
3) Leggere attentamente le risposte ricevute
4) Scrivere i messaggi con il colore di default, evitare altri colori.
5) Scrivere in Italiano o in Inglese, se possibile grammaticalmente corretto, evitate stili di scrittura poco chiari, quindi nessuna abbreviazione tipo telegramma o scrittura stile SMS o CHAT.
6) Appena registrati è consigliato presentarsi nel forum dedicato.
La non osservanza delle regole porta a provvedimenti di vari tipo da parte dello staff, in particolare la non osservanza della regola 5 porta alla cancellazione del post e alla segnalazione dell'utente. In caso di recidività l'utente rischia il ban temporaneo.
