problemi con driver ati su slack 12.2

Se avete problemi con l'installazione e la configurazione di Slackware postate qui. Non usate questo forum per argomenti generali... per quelli usate Gnu/Linux in genere.

Moderatore: Staff

Regole del forum
1) Citare sempre la versione di Slackware usata, la versione del Kernel e magari anche la versione della libreria coinvolta. Questi dati aiutano le persone che possono rispondere.
2) Per evitare confusione prego inserire in questo forum solo topic che riguardano appunto Slackware, se l'argomento è generale usate il forum Gnu/Linux in genere.
3) Leggere attentamente le risposte ricevute.
4) Scrivere i messaggi con il colore di default, evitare altri colori.
5) Scrivere in Italiano o in Inglese, se possibile grammaticalmente corretto, evitate stili di scrittura poco chiari, quindi nessuna abbreviazione tipo telegramma o scrittura stile SMS o CHAT.
6) Appena registrati è consigliato presentarsi nel forum dedicato.

La non osservanza delle regole porta a provvedimenti di vari tipo da parte dello staff, in particolare la non osservanza della regola 5 porta alla cancellazione del post e alla segnalazione dell'utente. In caso di recidività l'utente rischia il ban temporaneo.
Rispondi
Avatar utente
targzeta
Iper Master
Iper Master
Messaggi: 6643
Iscritto il: gio 3 nov 2005, 14:05
Nome Cognome: Emanuele Tomasi
Slackware: 64-current
Kernel: latest stable
Desktop: IceWM
Località: Carpignano Sal. (LE) <-> Pisa

Re: problemi con driver ati su slack 12.2

Messaggio da targzeta »

Allora esegui l'installer con l'opzione:

Codice: Seleziona tutto

--buildpkg Slackware/All
questo genererà i due pacchetti. Installali e poi lancia:

Codice: Seleziona tutto

startx
Se non parte posta il file Xorg.0.log.

Spina
Se pensi di essere troppo piccolo per fare la differenza, prova a dormire con una zanzara -- Dalai Lama
Top
Avatar utente
Darkstar89
Packager
Packager
Messaggi: 372
Iscritto il: mer 17 dic 2008, 19:06
Nome Cognome: Francesco
Slackware: 13
Località: Sassari

Re: problemi con driver ati su slack 12.2

Messaggio da Darkstar89 »

Allora, ho fatto come mi hai detto ma niente, almeno mi ha creato 2 pacchetti, dopo averli installati, mi ha avvisato che xorg.conf e stato modifcato, subito dopo ha scritto fai aticonfig --initial mi sembra per le impostaz, io come ha detto spina ho fatto subito startx, e mi ha dato no screen found dopo ho provato aticonfig e mi ha dato un'errore che in pratica non trovava lo schermo, allora ho fatto glxinfo e sempre no screen found allora ho fatto xorgsetup poi startx e sempre niente..
Questo è il Xorg.0.log

Codice: Seleziona tutto


X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Slackware 12.1 Slackware Linux Project
Current Operating System: Linux Akenza 2.6.27.7-smp #2 SMP Thu Nov 20 22:32:43 CST 2008 i686
Build Date: 30 June 2008  11:35:29PM
 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb 15 20:55:31 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/TTF,/usr/share/fonts/OTF,/usr/share/fonts/Type1,/usr/share/fonts/misc,/usr/share/fonts/75dpi/:unscaled.
(**) FontPath set to:
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/Type1,
	/usr/share/fonts/misc,
	/usr/share/fonts/75dpi/:unscaled,
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/Type1,
	/usr/share/fonts/misc,
	/usr/share/fonts/75dpi/:unscaled
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81d0280
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.3
	X.Org Video Driver: 2.0
	X.Org XInput driver : 2.0
	X.Org Server Extension : 0.3
	X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3188 card 1043,80a3 rev 01 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b188 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:0f:0: chip 1106,3149 card 1043,80ed rev 80 class 01,04,00 hdr 80
(II) PCI: 00:0f:1: chip 1106,0571 card 1043,80ed rev 06 class 01,01,8a hdr 00
(II) PCI: 00:10:0: chip 1106,3038 card 1043,80ed rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1043,80ed rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1043,80ed rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3038 card 1043,80ed rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:4: chip 1106,3104 card 1043,80ed rev 86 class 0c,03,20 hdr 80
(II) PCI: 00:11:0: chip 1106,3227 card 1043,80ed rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:5: chip 1106,3059 card 1043,810d rev 60 class 04,01,00 hdr 00
(II) PCI: 00:11:6: chip 1106,3068 card 0000,0000 rev 80 class 07,80,00 hdr 00
(II) PCI: 00:12:0: chip 1106,3065 card 1043,80ed rev 78 class 02,00,00 hdr 00
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:00:0: chip 1002,5960 card 1043,004c rev 01 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,5940 card 1043,004d rev 01 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 1 I/O range:
	[0] -1	0	0x0000e000 - 0x0000efff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0	0xfbd00000 - 0xfbffffff (0x300000) MX[B]
(II) Bus 1 prefetchable memory range:
	[0] -1	0	0xe8000000 - 0xfaffffff (0x13000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc RV280 [Radeon 9200 PRO] rev 1, Mem @ 0xe8000000/27, 0xfbe00000/16, I/O @ 0xe000/8, BIOS @ 0xfbd00000/17
(--) PCI: (1:0:1) ATI Technologies Inc RV280 [Radeon 9200 PRO] (Secondary) rev 1, Mem @ 0xf0000000/27, 0xfbf00000/16
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe4000000 from 0xe7ffffff to 0xe3ffffff
(II) Active PCI resource ranges:
	[0] -1	0	0xfba00000 - 0xfba000ff (0x100) MX[B]
	[1] -1	0	0xfbb00000 - 0xfbb000ff (0x100) MX[B]
	[2] -1	0	0xe4000000 - 0xe3ffffff (0x0) MX[B]O
	[3] -1	0	0xfbf00000 - 0xfbf0ffff (0x10000) MX[B](B)
	[4] -1	0	0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
	[5] -1	0	0xfbd00000 - 0xfbd1ffff (0x20000) MX[B](B)
	[6] -1	0	0xfbe00000 - 0xfbe0ffff (0x10000) MX[B](B)
	[7] -1	0	0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
	[8] -1	0	0x0000a000 - 0x0000a0ff (0x100) IX[B]
	[9] -1	0	0x0000a400 - 0x0000a4ff (0x100) IX[B]
	[10] -1	0	0x0000b800 - 0x0000b81f (0x20) IX[B]
	[11] -1	0	0x0000b400 - 0x0000b41f (0x20) IX[B]
	[12] -1	0	0x0000b000 - 0x0000b01f (0x20) IX[B]
	[13] -1	0	0x0000a800 - 0x0000a81f (0x20) IX[B]
	[14] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
	[15] -1	0	0x0000c000 - 0x0000c0ff (0x100) IX[B]
	[16] -1	0	0x0000c400 - 0x0000c40f (0x10) IX[B]
	[17] -1	0	0x0000c800 - 0x0000c803 (0x4) IX[B]
	[18] -1	0	0x0000d000 - 0x0000d007 (0x8) IX[B]
	[19] -1	0	0x0000d400 - 0x0000d403 (0x4) IX[B]
	[20] -1	0	0x0000d800 - 0x0000d807 (0x8) IX[B]
	[21] -1	0	0x0000e000 - 0x0000e0ff (0x100) IX[B](B)
(II) Inactive PCI resource ranges:
	[0] -1	0	0x00001000 - 0x000010ff (0x100) IX[B]
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xfba00000 - 0xfba000ff (0x100) MX[B]
	[1] -1	0	0xfbb00000 - 0xfbb000ff (0x100) MX[B]
	[2] -1	0	0xe4000000 - 0xe3ffffff (0x0) MX[B]O
	[3] -1	0	0xfbf00000 - 0xfbf0ffff (0x10000) MX[B](B)
	[4] -1	0	0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
	[5] -1	0	0xfbd00000 - 0xfbd1ffff (0x20000) MX[B](B)
	[6] -1	0	0xfbe00000 - 0xfbe0ffff (0x10000) MX[B](B)
	[7] -1	0	0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
	[8] -1	0	0x0000a000 - 0x0000a0ff (0x100) IX[B]
	[9] -1	0	0x0000a400 - 0x0000a4ff (0x100) IX[B]
	[10] -1	0	0x0000b800 - 0x0000b81f (0x20) IX[B]
	[11] -1	0	0x0000b400 - 0x0000b41f (0x20) IX[B]
	[12] -1	0	0x0000b000 - 0x0000b01f (0x20) IX[B]
	[13] -1	0	0x0000a800 - 0x0000a81f (0x20) IX[B]
	[14] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
	[15] -1	0	0x0000c000 - 0x0000c0ff (0x100) IX[B]
	[16] -1	0	0x0000c400 - 0x0000c40f (0x10) IX[B]
	[17] -1	0	0x0000c800 - 0x0000c803 (0x4) IX[B]
	[18] -1	0	0x0000d000 - 0x0000d007 (0x8) IX[B]
	[19] -1	0	0x0000d400 - 0x0000d403 (0x4) IX[B]
	[20] -1	0	0x0000d800 - 0x0000d807 (0x8) IX[B]
	[21] -1	0	0x0000e000 - 0x0000e0ff (0x100) IX[B](B)
(II) Inactive PCI resource ranges after removing overlaps:
	[0] -1	0	0x00001000 - 0x000010ff (0x100) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xfba00000 - 0xfba000ff (0x100) MX[B]
	[5] -1	0	0xfbb00000 - 0xfbb000ff (0x100) MX[B]
	[6] -1	0	0xe4000000 - 0xe3ffffff (0x0) MX[B]O
	[7] -1	0	0xfbf00000 - 0xfbf0ffff (0x10000) MX[B](B)
	[8] -1	0	0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
	[9] -1	0	0xfbd00000 - 0xfbd1ffff (0x20000) MX[B](B)
	[10] -1	0	0xfbe00000 - 0xfbe0ffff (0x10000) MX[B](B)
	[11] -1	0	0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
	[12] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[13] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[14] -1	0	0x0000a000 - 0x0000a0ff (0x100) IX[B]
	[15] -1	0	0x0000a400 - 0x0000a4ff (0x100) IX[B]
	[16] -1	0	0x0000b800 - 0x0000b81f (0x20) IX[B]
	[17] -1	0	0x0000b400 - 0x0000b41f (0x20) IX[B]
	[18] -1	0	0x0000b000 - 0x0000b01f (0x20) IX[B]
	[19] -1	0	0x0000a800 - 0x0000a81f (0x20) IX[B]
	[20] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
	[21] -1	0	0x0000c000 - 0x0000c0ff (0x100) IX[B]
	[22] -1	0	0x0000c400 - 0x0000c40f (0x10) IX[B]
	[23] -1	0	0x0000c800 - 0x0000c803 (0x4) IX[B]
	[24] -1	0	0x0000d000 - 0x0000d007 (0x8) IX[B]
	[25] -1	0	0x0000d400 - 0x0000d403 (0x4) IX[B]
	[26] -1	0	0x0000d800 - 0x0000d807 (0x8) IX[B]
	[27] -1	0	0x0000e000 - 0x0000e0ff (0x100) IX[B](B)
	[28] -1	0	0x00001000 - 0x000010ff (0x100) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "type1" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 7.1.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DEC-XTRAP
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "fgl.renamed.libdri"
(WW) Warning, couldn't open module fgl.renamed.libdri
(II) UnloadModule: "fgl.renamed.libdri"
(EE) Failed to load module "fgl.renamed.libdri" (module does not exist, 0)
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 1.4.2, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.2
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
	compiled for 7.1.0, module version = 8.57.2
	Module class: X.Org Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.3.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.3.1
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.0
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.57.2
(II) ATI Proprietary Linux Driver Release Identifier: 8.573                                
(II) ATI Proprietary Linux Driver Build Date: Jan 13 2009 23:21:19
(II) AMD ASIC control file status: R12 S1 B313 N313 T312
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(EE) No devices detected.

Fatal server error:
no screens found
Sto perdendo le speranze :cry: sono fermo a no scren found da ieri notte , cosa faccio formatto,
#-o propio eiri che lo avevo finito di mettere a posto!
Top
Avatar utente
Darkstar89
Packager
Packager
Messaggi: 372
Iscritto il: mer 17 dic 2008, 19:06
Nome Cognome: Francesco
Slackware: 13
Località: Sassari

Re: problemi con driver ati su slack 12.2

Messaggio da Darkstar89 »

Ho capito Xorg.0.log...
Praticamente le righe da leggere sono queste:

Codice: Seleziona tutto

(WW) | Warning, couldn't open module fgl.renamed.libdri
(EE)  | Failed to load module "fgl.renamed.libdri" (module does not exist, 0)
(WW) | fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(EE)  |No devices detected.
Fatal server error:
no screens found
Come aggiungo i moduli?
Questo è "lspci | grep VGA"
01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (rev 01)
Correggo la parte (BusID PCI:1:0:1) ?
Top
Avatar utente
targzeta
Iper Master
Iper Master
Messaggi: 6643
Iscritto il: gio 3 nov 2005, 14:05
Nome Cognome: Emanuele Tomasi
Slackware: 64-current
Kernel: latest stable
Desktop: IceWM
Località: Carpignano Sal. (LE) <-> Pisa

Re: problemi con driver ati su slack 12.2

Messaggio da targzeta »

Ma hai provato l'xorg.conf che ti ho spedito per email? Questo non è l'output di quell'xorg.conf.

Spina
Se pensi di essere troppo piccolo per fare la differenza, prova a dormire con una zanzara -- Dalai Lama
Top
Avatar utente
Darkstar89
Packager
Packager
Messaggi: 372
Iscritto il: mer 17 dic 2008, 19:06
Nome Cognome: Francesco
Slackware: 13
Località: Sassari

Re: problemi con driver ati su slack 12.2

Messaggio da Darkstar89 »

Eh, lo avevo provato prima #-o , ho reinstallato tutto e ho già riconfigurato quasi tutto, grazie ma mi sa che farò a meno dell'acceleratore e di compiz,
almeno avevo salvato un vecchio mio tema..
Dà magari domani ci sentiamo in chat ora che è tutto ok e riprovo ad installare tutto da capo..
Comunque ora che è tutto appena installato mettendo glxinfo mi dà

glxinfo
No protocol specified
Error: unable to open display :0.0
:o
Top
Avatar utente
targzeta
Iper Master
Iper Master
Messaggi: 6643
Iscritto il: gio 3 nov 2005, 14:05
Nome Cognome: Emanuele Tomasi
Slackware: 64-current
Kernel: latest stable
Desktop: IceWM
Località: Carpignano Sal. (LE) <-> Pisa

Re: problemi con driver ati su slack 12.2

Messaggio da targzeta »

Ora puoi seguire i passi di questo post:
viewtopic.php?f=1&t=27673&p=233615#p233615

Fammi sapere,
Spina
Se pensi di essere troppo piccolo per fare la differenza, prova a dormire con una zanzara -- Dalai Lama
Top
Avatar utente
Darkstar89
Packager
Packager
Messaggi: 372
Iscritto il: mer 17 dic 2008, 19:06
Nome Cognome: Francesco
Slackware: 13
Località: Sassari

Re: problemi con driver ati su slack 12.2

Messaggio da Darkstar89 »

Ciao..
ho riprovato ad installare i driver ati, e questa volta ci sono riuscito, solo che lanciando

glxinfo | grep rendering

mi dà

direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose)

è risolvibile?
Top
Avatar utente
targzeta
Iper Master
Iper Master
Messaggi: 6643
Iscritto il: gio 3 nov 2005, 14:05
Nome Cognome: Emanuele Tomasi
Slackware: 64-current
Kernel: latest stable
Desktop: IceWM
Località: Carpignano Sal. (LE) <-> Pisa

Re: problemi con driver ati su slack 12.2

Messaggio da targzeta »

Sei sicuro di aver usato il driver fglrx nell'xorg.conf?

Spina
Se pensi di essere troppo piccolo per fare la differenza, prova a dormire con una zanzara -- Dalai Lama
Top
Avatar utente
Darkstar89
Packager
Packager
Messaggi: 372
Iscritto il: mer 17 dic 2008, 19:06
Nome Cognome: Francesco
Slackware: 13
Località: Sassari

Re: problemi con driver ati su slack 12.2

Messaggio da Darkstar89 »

Strano guarda l'xorg che mi ha creato

Codice: Seleziona tutto


#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

# NOTE:  This is a NEW IMPROVED version of XF86Config-fbdev that uses the vesa
# driver instead of the fbdev driver.  Thanks to Kenneth Fanyo who pointed
# this out to me. :)

# This XF86Config file is designed for use with the VESA framebuffer.
# This generic interface should work with nearly all video cards
# (although not every card will support every resolution).

# With the new driver, it should no longer be required to have frame buffer
# support in the kernel, or to run it on the console.
#
# Enjoy! :)
# -- volkerdi@slackware.com
#

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"   # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the font modules
    Load        "type1"
    Load        "freetype"
    #Load        "speedo"

# This loads the GLX module
    Load       "glx"

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath     "/usr/share/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#

    FontPath   "/usr/share/fonts/local/"
    FontPath   "/usr/share/fonts/misc/"
    FontPath   "/usr/share/fonts/OTF/"
    FontPath   "/usr/share/fonts/TTF/"
    FontPath   "/usr/share/fonts/Type1/"
    FontPath   "/usr/share/fonts/CID/"
    FontPath   "/usr/share/fonts/Speedo/"
    FontPath   "/usr/share/fonts/75dpi/:unscaled"
    FontPath   "/usr/share/fonts/100dpi/:unscaled"
    FontPath   "/usr/share/fonts/75dpi/"
    FontPath   "/usr/share/fonts/100dpi/"
    FontPath   "/usr/share/fonts/cyrillic/"

# ModulePath can be used to set a search path for the X server modules.
# The default path is shown here.

#    ModulePath "/usr/lib/xorg/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option     "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.

#    Option     "DontVTSwitch"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option     "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option     "DontZoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option     "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

#    Option     "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

#    Option     "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option     "AllowNonLocalModInDev"

# Set the basic blanking screen saver timeout.

#    Option      "blank time"    "10"    # 10 minutes

# Set the DPMS timeouts.  These are set here because they are global
# rather than screen-specific.  These settings alone don't enable DPMS.
# It is enabled per-screen (or per-monitor), and even then only when
# the driver supports it.

#    Option      "standby time"  "20"
#    Option      "suspend time"  "30"
#    Option      "off time"      "60"

# On some platform the server needs to estimate the sizes of PCI
# memory and pio ranges. This is done by assuming that PCI ranges
# don't overlap. Some broken BIOSes tend to set ranges of inactive
# devices wrong. Here one can adjust how aggressive the assumptions
# should be. Default is 0.

# Option   "EstimateSizesAggresively" "0"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier  "Keyboard1"
    Driver      "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option     "Protocol"      "Xqueue"

# Set the keyboard auto repeat parameters.  Not all platforms implement
# this.

#    Option     "AutoRepeat"    "500 5"

# Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)).

#    Option     "Xleds" "1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.

#    Option     "XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a European
# keyboard, you will probably want to use one of:
#
#    Option     "XkbModel"      "pc102"
#    Option     "XkbModel"      "pc105"
#
# If you have a Microsoft Natural keyboard, you can use:
#
#    Option     "XkbModel"      "microsoft"
#
# If you have a US "windows" keyboard you will want:
#
#    Option     "XkbModel"      "pc104"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#
#    Option     "XkbLayout"     "de"
#
# or:
#
#    Option     "XkbLayout"     "de"
#    Option     "XkbVariant"    "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#
#    Option     "XkbOptions"    "ctrl:swapcaps"


# These are the default XKB settings for X.Org
#
#    Option     "XkbRules"      "xorg"
#    Option     "XkbModel"      "pc105"
#    Option     "XkbLayout"     "us"
#    Option     "XkbVariant"    ""
#    Option     "XkbOptions"    ""

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier  "Mouse1"
    Driver      "mouse"

# On platforms where PnP mouse detection is supported the following
# protocol setting can be used when using a newer PnP mouse:

    Option     "Protocol"      "Auto"

# The available mouse protocols types that you can set below are:
#    Auto BusMouse GlidePoint GlidePointPS/2 IntelliMouse IMPS/2
#    Logitech Microsoft MMHitTab MMSeries Mouseman MouseManPlusPS/2
#    MouseSystems NetMousePS/2 NetScrollPS/2 OSMouse PS/2 SysMouse
#    ThinkingMouse ThinkingMousePS/2 Xqueue
    Option "Protocol"    "PS/2"

# The mouse device.  The device is normally set to /dev/mouse,
# which is usually a symbolic link to the real device.

    Option "Device"      "/dev/mouse"
#   Option "Device"      "/dev/psaux"
#   Option "Device"      "/dev/ttyS0"
#   Option "Device"      "/dev/ttyS1"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"  "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"          "9600"
#    Option "SampleRate"        "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection

# Some examples of extended input devices

# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier  "My Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync   31.5 - 50.0

#    HorizSync  30-64         # multisync
#    HorizSync  31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync  15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 40-90

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

Section "Device"
    Identifier  "VESA Framebuffer"
    Driver      "vesa"
    #VideoRam    4096
    # Insert Clocks lines here if appropriate
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen 1"
    Device      "VESA Framebuffer"
    Monitor     "My Monitor"

# If your card can handle it, a higher default color depth (like 24 or 32)
# is highly recommended.

#   DefaultDepth 8
#   DefaultDepth 16
   DefaultDepth 24
#   DefaultDepth 32

# "1024x768" is also a conservative usable default resolution.  If you
# have a better monitor, feel free to try resolutions such as
# "1152x864", "1280x1024", "1600x1200", and "1800x1400" (or whatever your
# card/monitor can produce)

    Subsection "Display"
        Depth       8
        Modes "1024x768" "800x600" "640x480"
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes "1024x768" "800x600" "640x480"
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes "1024x768" "800x600" "640x480"
    EndSubsection
    Subsection "Display"
        Depth       32
        Modes "1024x768" "800x600" "640x480"
    EndSubsection

EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.

    Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection
Section "Screen"
Identifier "Screen 1"
Device "VESA Framebuffer"
Monitor "My Monitor"

Sto usando i driver vesa no?poi ci mancano molte cosa nella parte
# This loads the GLX module
Load "glx"
....
Poi la risoluz non è cambiata, faccio xorgsetup o modifico io
Top
Avatar utente
targzeta
Iper Master
Iper Master
Messaggi: 6643
Iscritto il: gio 3 nov 2005, 14:05
Nome Cognome: Emanuele Tomasi
Slackware: 64-current
Kernel: latest stable
Desktop: IceWM
Località: Carpignano Sal. (LE) <-> Pisa

Re: problemi con driver ati su slack 12.2

Messaggio da targzeta »

Hai eseguito

Codice: Seleziona tutto

aticonfig --initial
? Questo script genererà per te un xorg.conf in modo che possa caricare il driver fglrx. Lo script salva il tuo xorg.conf originale (guarda la dir /etc/X11), quindi se dopo l'esecuzione non dovesse partire il server X, allora ripristina l'originale e posta l'Xorg.log.

Spina
Se pensi di essere troppo piccolo per fare la differenza, prova a dormire con una zanzara -- Dalai Lama
Top
Avatar utente
Darkstar89
Packager
Packager
Messaggi: 372
Iscritto il: mer 17 dic 2008, 19:06
Nome Cognome: Francesco
Slackware: 13
Località: Sassari

Re: problemi con driver ati su slack 12.2

Messaggio da Darkstar89 »

Questo è quello che mi dà "aticonfig --initial"
No protocol specified
aticonfig: No supported adapters detected
non mi dà neanche un help...
Top
Avatar utente
targzeta
Iper Master
Iper Master
Messaggi: 6643
Iscritto il: gio 3 nov 2005, 14:05
Nome Cognome: Emanuele Tomasi
Slackware: 64-current
Kernel: latest stable
Desktop: IceWM
Località: Carpignano Sal. (LE) <-> Pisa

Re: problemi con driver ati su slack 12.2

Messaggio da targzeta »

Ma sei sicuro che i driver 9.1 siano compatibili con la tua scheda? Dal sito della ATI quello che ho trovato io per la 9200 sono i driver del 2006!!! Però forse ho sbagliato scheda io?

Spina
Se pensi di essere troppo piccolo per fare la differenza, prova a dormire con una zanzara -- Dalai Lama
Top
Avatar utente
Darkstar89
Packager
Packager
Messaggi: 372
Iscritto il: mer 17 dic 2008, 19:06
Nome Cognome: Francesco
Slackware: 13
Località: Sassari

Re: problemi con driver ati su slack 12.2

Messaggio da Darkstar89 »

No la scheda è quella solo che l'altra volta installando quie driver non partiva più x.. non sò se non partiva perche avevo installato con ./nome-driver o per incopatibilità con la 12.2, cosa consigli
Top
Avatar utente
targzeta
Iper Master
Iper Master
Messaggi: 6643
Iscritto il: gio 3 nov 2005, 14:05
Nome Cognome: Emanuele Tomasi
Slackware: 64-current
Kernel: latest stable
Desktop: IceWM
Località: Carpignano Sal. (LE) <-> Pisa

Re: problemi con driver ati su slack 12.2

Messaggio da targzeta »

Darkstar89 ha scritto:...cosa consigli
  • disinstalla i pacchetti che hai creato per la 9.1
  • crei i pacchetti per la versione adatta alla tua scheda
  • installa i pacchetti
  • esegui aticonfig --initial
  • lanci startx ed incroci le dita :)
Spina
Se pensi di essere troppo piccolo per fare la differenza, prova a dormire con una zanzara -- Dalai Lama
Top
Avatar utente
targzeta
Iper Master
Iper Master
Messaggi: 6643
Iscritto il: gio 3 nov 2005, 14:05
Nome Cognome: Emanuele Tomasi
Slackware: 64-current
Kernel: latest stable
Desktop: IceWM
Località: Carpignano Sal. (LE) <-> Pisa

Re: problemi con driver ati su slack 12.2

Messaggio da targzeta »

P.S. ho appena visto che il tuo installer non ha lo slackbuild interno per creare i pacchetti ati. Devi vedere questa pagina:
http://wiki.cchtml.com/index.php/ATI_Sl ... ager_(ITA)

Ma temo tu abbia poche possibilità di installare i proprietari, io mi butterei sugli open, comunque provare non costa nulla :)

Spina
Se pensi di essere troppo piccolo per fare la differenza, prova a dormire con una zanzara -- Dalai Lama
Top
Rispondi

Torna a “Slackware”