le avventure di Xorg e i 75hz

Se avete problemi con l'installazione e la configurazione di Slackware postate qui. Non usate questo forum per argomenti generali... per quelli usate Gnu/Linux in genere.

Moderatore: Staff

Regole del forum
1) Citare sempre la versione di Slackware usata, la versione del Kernel e magari anche la versione della libreria coinvolta. Questi dati aiutano le persone che possono rispondere.
2) Per evitare confusione prego inserire in questo forum solo topic che riguardano appunto Slackware, se l'argomento è generale usate il forum Gnu/Linux in genere.
3) Leggere attentamente le risposte ricevute.
4) Scrivere i messaggi con il colore di default, evitare altri colori.
5) Scrivere in Italiano o in Inglese, se possibile grammaticalmente corretto, evitate stili di scrittura poco chiari, quindi nessuna abbreviazione tipo telegramma o scrittura stile SMS o CHAT.
6) Appena registrati è consigliato presentarsi nel forum dedicato.

La non osservanza delle regole porta a provvedimenti di vari tipo da parte dello staff, in particolare la non osservanza della regola 5 porta alla cancellazione del post e alla segnalazione dell'utente. In caso di recidività l'utente rischia il ban temporaneo.
Rispondi
Helvete
Linux 0.x
Linux 0.x
Messaggi: 12
Iscritto il: sab 8 mar 2008, 20:10

le avventure di Xorg e i 75hz

Messaggio da Helvete »

salve a tutti :D

dopo tempo di non utilizzo immemorabile... mi sono deciso a rimettere su la cara vecchia Slacky!

ora... tutto sembra funzionare (a parte un mp3 che non so per quale motivo non monta, ma verifichero) ma ho un problema, il mio LCD non va oltre i 60hz a 1280x1024... su XP fa 75hz e potete capire che cosi mi fanno male gli occhi!

posto il log:

Codice: Seleziona tutto

X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: Slackware 12.0 Slackware Linux Project
Current Operating System: Linux JakBox 2.6.21.5-smp #2 SMP Tue Jun 19 14:58:11 CDT 2007 i686
Build Date: 09 May 2007
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar  8 19:47:03 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) |   |-->Monitor "benq"
(**) |   |-->Device "asus9600"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to:
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/Type1,
	/usr/share/fonts/misc,
	/usr/share/fonts/75dpi/:unscaled,
	/usr/lib/X11/fonts/misc/,
	/usr/lib/X11/fonts/75dpi/:unscaled,
	/usr/lib/X11/fonts/100dpi/:unscaled,
	/usr/lib/X11/fonts/Speedo/,
	/usr/lib/X11/fonts/Type1/,
	/usr/lib/X11/fonts/TTF/,
	/usr/lib/X11/fonts/OTF/,
	/usr/lib/X11/fonts/cyrillic/,
	/usr/lib/X11/fonts/75dpi/,
	/usr/lib/X11/fonts/100dpi/
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Option "AIGLX" "true"
(**) Extension "Composite" is enabled
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81dcd60
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.3
	X.Org Video Driver: 1.2
	X.Org XInput driver : 0.7
	X.Org Server Extension : 0.3
	X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 1.2
(--) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,01e0 card 1043,80ac rev a2 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 10de,01eb card 1043,80ac rev a2 class 05,00,00 hdr 80
(II) PCI: 00:00:2: chip 10de,01ee card 1043,80ac rev a2 class 05,00,00 hdr 80
(II) PCI: 00:00:3: chip 10de,01ed card 1043,80ac rev a2 class 05,00,00 hdr 80
(II) PCI: 00:00:4: chip 10de,01ec card 1043,80ac rev a2 class 05,00,00 hdr 80
(II) PCI: 00:00:5: chip 10de,01ef card 1043,80ac rev a2 class 05,00,00 hdr 80
(II) PCI: 00:01:0: chip 10de,0060 card 1043,80ad rev a3 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 10de,0064 card 1043,0c11 rev a2 class 0c,05,00 hdr 80
(II) PCI: 00:02:0: chip 10de,0067 card 1043,0c11 rev a3 class 0c,03,10 hdr 80
(II) PCI: 00:02:1: chip 10de,0067 card 1043,0c11 rev a3 class 0c,03,10 hdr 80
(II) PCI: 00:02:2: chip 10de,0068 card 1043,0c11 rev a3 class 0c,03,20 hdr 80
(II) PCI: 00:04:0: chip 10de,0066 card 1043,80a7 rev a1 class 02,00,00 hdr 00
(II) PCI: 00:08:0: chip 10de,006c card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:09:0: chip 10de,0065 card 1043,0c11 rev a2 class 01,01,8a hdr 00
(II) PCI: 00:0c:0: chip 10de,006d card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:0d:0: chip 10de,006e card 1043,809a rev a3 class 0c,00,10 hdr 00
(II) PCI: 00:1e:0: chip 10de,01e8 card 0000,0000 rev a2 class 06,04,00 hdr 01
(II) PCI: 01:0a:0: chip 1102,0002 card 1102,8040 rev 07 class 04,01,00 hdr 80
(II) PCI: 01:0a:1: chip 1102,7002 card 1102,0020 rev 07 class 09,80,00 hdr 80
(II) PCI: 01:0b:0: chip 1095,3112 card 1095,6112 rev 02 class 01,04,00 hdr 00
(II) PCI: 02:01:0: chip 10b7,9201 card 1043,80ab rev 40 class 02,00,00 hdr 00
(II) PCI: 03:00:0: chip 1002,4152 card 1043,c002 rev 00 class 03,00,00 hdr 80
(II) PCI: 03:00:1: chip 1002,4172 card 1043,c003 rev 00 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,3), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:8:0), (0,1,1), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 1 I/O range:
	[0] -1	0	0x0000a000 - 0x0000bfff (0x2000) IX[B]
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0	0xe8000000 - 0xe9ffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
	[0] -1	0	0x50000000 - 0x500fffff (0x100000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:12:0), (0,2,2), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 2 I/O range:
	[0] -1	0	0x0000c000 - 0x0000cfff (0x1000) IX[B]
(II) Bus 2 non-prefetchable memory range:
	[0] -1	0	0xe4000000 - 0xe5ffffff (0x2000000) MX[B]
(II) Bus 2 prefetchable memory range:
	[0] -1	0	0x50100000 - 0x501fffff (0x100000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:30:0), (0,3,3), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 3 I/O range:
	[0] -1	0	0x0000d000 - 0x0000dfff (0x1000) IX[B]
(II) Bus 3 non-prefetchable memory range:
	[0] -1	0	0xe6000000 - 0xe7ffffff (0x2000000) MX[B]
(II) Bus 3 prefetchable memory range:
	[0] -1	0	0xc0000000 - 0xdfffffff (0x20000000) MX[B]
(--) PCI:*(3:0:0) ATI Technologies Inc RV350 AR [Radeon 9600] rev 0, Mem @ 0xc0000000/28, 0xe7000000/16, I/O @ 0xd000/8
(--) PCI: (3:0:1) ATI Technologies Inc RV350 AR [Radeon 9600] (Secondary) rev 0, Mem @ 0xd0000000/28, 0xe7010000/16
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe3ffffff to 0xdfffffff
(II) Active PCI resource ranges:
	[0] -1	0	0xe5000000 - 0xe500007f (0x80) MX[B]
	[1] -1	0	0xe9000000 - 0xe90001ff (0x200) MX[B]
	[2] -1	0	0xea003000 - 0xea00303f (0x40) MX[B]
	[3] -1	0	0xea002000 - 0xea0027ff (0x800) MX[B]
	[4] -1	0	0xea005000 - 0xea005fff (0x1000) MX[B]
	[5] -1	0	0xea004000 - 0xea0040ff (0x100) MX[B]
	[6] -1	0	0xea001000 - 0xea001fff (0x1000) MX[B]
	[7] -1	0	0xea000000 - 0xea000fff (0x1000) MX[B]
	[8] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[9] -1	0	0xe7000000 - 0xe700ffff (0x10000) MX[B](B)
	[10] -1	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
	[11] -1	0	0x0000c000 - 0x0000c07f (0x80) IX[B]
	[12] -1	0	0x0000b800 - 0x0000b80f (0x10) IX[B]
	[13] -1	0	0x0000b400 - 0x0000b403 (0x4) IX[B]
	[14] -1	0	0x0000b000 - 0x0000b007 (0x8) IX[B]
	[15] -1	0	0x0000ac00 - 0x0000ac03 (0x4) IX[B]
	[16] -1	0	0x0000a800 - 0x0000a807 (0x8) IX[B]
	[17] -1	0	0x0000a400 - 0x0000a407 (0x8) IX[B]
	[18] -1	0	0x0000a000 - 0x0000a01f (0x20) IX[B]
	[19] -1	0	0x0000f000 - 0x0000f00f (0x10) IX[B]
	[20] -1	0	0x0000e000 - 0x0000e007 (0x8) IX[B]
	[21] -1	0	0x0000e400 - 0x0000e41f (0x20) IX[B]
	[22] -1	0	0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
(II) Inactive PCI resource ranges:
	[0] -1	0	0xe7010000 - 0xe701ffff (0x10000) MX[B](B)
	[1] -1	0	0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xe5000000 - 0xe500007f (0x80) MX[B]
	[1] -1	0	0xe9000000 - 0xe90001ff (0x200) MX[B]
	[2] -1	0	0xea003000 - 0xea00303f (0x40) MX[B]
	[3] -1	0	0xea002000 - 0xea0027ff (0x800) MX[B]
	[4] -1	0	0xea005000 - 0xea005fff (0x1000) MX[B]
	[5] -1	0	0xea004000 - 0xea0040ff (0x100) MX[B]
	[6] -1	0	0xea001000 - 0xea001fff (0x1000) MX[B]
	[7] -1	0	0xea000000 - 0xea000fff (0x1000) MX[B]
	[8] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[9] -1	0	0xe7000000 - 0xe700ffff (0x10000) MX[B](B)
	[10] -1	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
	[11] -1	0	0x0000c000 - 0x0000c07f (0x80) IX[B]
	[12] -1	0	0x0000b800 - 0x0000b80f (0x10) IX[B]
	[13] -1	0	0x0000b400 - 0x0000b403 (0x4) IX[B]
	[14] -1	0	0x0000b000 - 0x0000b007 (0x8) IX[B]
	[15] -1	0	0x0000ac00 - 0x0000ac03 (0x4) IX[B]
	[16] -1	0	0x0000a800 - 0x0000a807 (0x8) IX[B]
	[17] -1	0	0x0000a400 - 0x0000a407 (0x8) IX[B]
	[18] -1	0	0x0000a000 - 0x0000a01f (0x20) IX[B]
	[19] -1	0	0x0000f000 - 0x0000f00f (0x10) IX[B]
	[20] -1	0	0x0000e000 - 0x0000e007 (0x8) IX[B]
	[21] -1	0	0x0000e400 - 0x0000e41f (0x20) IX[B]
	[22] -1	0	0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
(II) Inactive PCI resource ranges after removing overlaps:
	[0] -1	0	0xe7010000 - 0xe701ffff (0x10000) MX[B](B)
	[1] -1	0	0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xe5000000 - 0xe500007f (0x80) MX[B]
	[5] -1	0	0xe9000000 - 0xe90001ff (0x200) MX[B]
	[6] -1	0	0xea003000 - 0xea00303f (0x40) MX[B]
	[7] -1	0	0xea002000 - 0xea0027ff (0x800) MX[B]
	[8] -1	0	0xea005000 - 0xea005fff (0x1000) MX[B]
	[9] -1	0	0xea004000 - 0xea0040ff (0x100) MX[B]
	[10] -1	0	0xea001000 - 0xea001fff (0x1000) MX[B]
	[11] -1	0	0xea000000 - 0xea000fff (0x1000) MX[B]
	[12] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[13] -1	0	0xe7000000 - 0xe700ffff (0x10000) MX[B](B)
	[14] -1	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
	[15] -1	0	0xe7010000 - 0xe701ffff (0x10000) MX[B](B)
	[16] -1	0	0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
	[17] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[18] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[19] -1	0	0x0000c000 - 0x0000c07f (0x80) IX[B]
	[20] -1	0	0x0000b800 - 0x0000b80f (0x10) IX[B]
	[21] -1	0	0x0000b400 - 0x0000b403 (0x4) IX[B]
	[22] -1	0	0x0000b000 - 0x0000b007 (0x8) IX[B]
	[23] -1	0	0x0000ac00 - 0x0000ac03 (0x4) IX[B]
	[24] -1	0	0x0000a800 - 0x0000a807 (0x8) IX[B]
	[25] -1	0	0x0000a400 - 0x0000a407 (0x8) IX[B]
	[26] -1	0	0x0000a000 - 0x0000a01f (0x20) IX[B]
	[27] -1	0	0x0000f000 - 0x0000f00f (0x10) IX[B]
	[28] -1	0	0x0000e000 - 0x0000e007 (0x8) IX[B]
	[29] -1	0	0x0000e400 - 0x0000e41f (0x20) IX[B]
	[30] -1	0	0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 1.3.0, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(**) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 4.2.0
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 6.6.192
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.1.1
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 1.2.99.905, module version = 1.1.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.7
(II) ATI: ATI driver wrapper (version 6.6.192) for chipsets: mach64, rage128, radeon
(II) Primary Device is: PCI 03:00:0
(II) Loading sub module "radeon"
(II) LoadModule: "radeon"
(II) Reloading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
	ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
	ATI ES1000 515E (PCI), ATI ES1000 5969 (PCI),
	ATI Radeon Mobility M7 LW (AGP),
	ATI Mobility FireGL 7800 M7 LX (AGP),
	ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
	ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
	ATI Radeon IGP330/340/350 (A4) 4137,
	ATI Radeon IGP330M/340M/350M (U2) 4337,
	ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
	ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
	ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
	ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
	ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
	ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
	ATI Radeon Mobility 9000 (M9) Lf (AGP),
	ATI Radeon Mobility 9000 (M9) Lg (AGP),
	ATI Radeon 9100 IGP (A5) 5834,
	ATI Radeon Mobility 9100 IGP (U3) 5835, ATI Radeon 9100 PRO IGP 7834,
	ATI Radeon Mobility 9200 IGP 7835, ATI Radeon 9250 5960 (AGP),
	ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
	ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
	ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
	ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
	ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
	ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
	ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
	ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
	ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
	ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
	ATI FireGL RV360 AV (AGP),
	ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
	ATI Radeon Mobility 9600 (M10) NQ (AGP),
	ATI Radeon Mobility 9600 (M11) NR (AGP),
	ATI Radeon Mobility 9600 (M10) NS (AGP),
	ATI FireGL Mobility T2 (M10) NT (AGP),
	ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon 9650,
	ATI Radeon 9800SE AH (AGP), ATI Radeon 9800 AI (AGP),
	ATI Radeon 9800 AJ (AGP), ATI FireGL X2 AK (AGP),
	ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
	ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
	ATI Radeon X600 (RV380) 3E50 (PCIE),
	ATI FireGL V3200 (RV380) 3E54 (PCIE),
	ATI Radeon Mobility X600 (M24) 3150 (PCIE),
	ATI Radeon Mobility X300 (M24) 3152 (PCIE),
	ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X300 (RV370) 5B60 (PCIE),
	ATI Radeon X600 (RV370) 5B62 (PCIE),
	ATI Radeon X550 (RV370) 5B63 (PCIE),
	ATI FireGL V3100 (RV370) 5B64 (PCIE),
	ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
	ATI Radeon Mobility X300 (M22) 5460 (PCIE),
	ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
	ATI FireGL M22 GL 5464 (PCIE), ATI Radeon XPRESS 200 5A41 (PCIE),
	ATI Radeon XPRESS 200M 5A42 (PCIE),
	ATI Radeon XPRESS 200 5A61 (PCIE),
	ATI Radeon XPRESS 200M 5A62 (PCIE),
	ATI Radeon XPRESS 200 5954 (PCIE),
	ATI Radeon XPRESS 200M 5955 (PCIE),
	ATI Radeon XPRESS 200 5974 (PCIE),
	ATI Radeon XPRESS 200M 5975 (PCIE), ATI FireGL V5000 (RV410) (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility Radeon X700 XL (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Radeon X700 PRO (RV410) (PCIE),
	ATI Radeon X700 XT (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 SE (RV410) (PCIE),
	ATI Radeon X800 (R420) JH (AGP), ATI Radeon X800PRO (R420) JI (AGP),
	ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
	ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
	ATI Radeon Mobility 9800 (M18) JN (AGP),
	ATI Radeon X800XT (R420) JP (AGP), ATI Radeon X800 SE (R420) (AGP),
	ATI Radeon AIW X800 VE (R420) JT (AGP),
	ATI Radeon X800 (R423) UH (PCIE),
	ATI Radeon X800PRO (R423) UI (PCIE),
	ATI Radeon X800LE (R423) UJ (PCIE),
	ATI Radeon X800SE (R423) UK (PCIE),
	ATI FireGL V5100 (R423) UQ (PCIE),
	ATI FireGL unknown (R423) UR (PCIE),
	ATI FireGL unknown (R423) UT (PCIE),
	ATI Radeon X800XT (R423) 5D57 (PCIE), ATI FireGL V7100 (R423) (PCIE),
	ATI Mobility FireGL V5100 (M28) (PCIE),
	ATI Mobility Radeon X800 (M28) (PCIE),
	ATI Mobility Radeon X800 XT (M28) (PCIE),
	ATI Radeon X800 (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
	ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 XTP (R430) (PCIE),
	ATI Radeon X850 5D4C (PCIE),
	ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
	ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
	ATI Radeon X850 XT (R480) (PCIE),
	ATI Radeon X850 XT PE (R480) (PCIE),
	ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
	ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP)
(--) Assigning device section with no busID to primary device
(WW) RADEON: No matching Device section for instance (BusID PCI:3:0:1) found
(--) Chipset ATI Radeon 9600XT AR (AGP) found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xe5000000 - 0xe500007f (0x80) MX[B]
	[5] -1	0	0xe9000000 - 0xe90001ff (0x200) MX[B]
	[6] -1	0	0xea003000 - 0xea00303f (0x40) MX[B]
	[7] -1	0	0xea002000 - 0xea0027ff (0x800) MX[B]
	[8] -1	0	0xea005000 - 0xea005fff (0x1000) MX[B]
	[9] -1	0	0xea004000 - 0xea0040ff (0x100) MX[B]
	[10] -1	0	0xea001000 - 0xea001fff (0x1000) MX[B]
	[11] -1	0	0xea000000 - 0xea000fff (0x1000) MX[B]
	[12] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[13] -1	0	0xe7000000 - 0xe700ffff (0x10000) MX[B](B)
	[14] -1	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
	[15] -1	0	0xe7010000 - 0xe701ffff (0x10000) MX[B](B)
	[16] -1	0	0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
	[17] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[18] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[19] -1	0	0x0000c000 - 0x0000c07f (0x80) IX[B]
	[20] -1	0	0x0000b800 - 0x0000b80f (0x10) IX[B]
	[21] -1	0	0x0000b400 - 0x0000b403 (0x4) IX[B]
	[22] -1	0	0x0000b000 - 0x0000b007 (0x8) IX[B]
	[23] -1	0	0x0000ac00 - 0x0000ac03 (0x4) IX[B]
	[24] -1	0	0x0000a800 - 0x0000a807 (0x8) IX[B]
	[25] -1	0	0x0000a400 - 0x0000a407 (0x8) IX[B]
	[26] -1	0	0x0000a000 - 0x0000a01f (0x20) IX[B]
	[27] -1	0	0x0000f000 - 0x0000f00f (0x10) IX[B]
	[28] -1	0	0x0000e000 - 0x0000e007 (0x8) IX[B]
	[29] -1	0	0x0000e400 - 0x0000e41f (0x20) IX[B]
	[30] -1	0	0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
(II) resource ranges after probing:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xe5000000 - 0xe500007f (0x80) MX[B]
	[5] -1	0	0xe9000000 - 0xe90001ff (0x200) MX[B]
	[6] -1	0	0xea003000 - 0xea00303f (0x40) MX[B]
	[7] -1	0	0xea002000 - 0xea0027ff (0x800) MX[B]
	[8] -1	0	0xea005000 - 0xea005fff (0x1000) MX[B]
	[9] -1	0	0xea004000 - 0xea0040ff (0x100) MX[B]
	[10] -1	0	0xea001000 - 0xea001fff (0x1000) MX[B]
	[11] -1	0	0xea000000 - 0xea000fff (0x1000) MX[B]
	[12] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[13] -1	0	0xe7000000 - 0xe700ffff (0x10000) MX[B](B)
	[14] -1	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
	[15] -1	0	0xe7010000 - 0xe701ffff (0x10000) MX[B](B)
	[16] -1	0	0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
	[17] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[18] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[19] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[20] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[21] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[22] -1	0	0x0000c000 - 0x0000c07f (0x80) IX[B]
	[23] -1	0	0x0000b800 - 0x0000b80f (0x10) IX[B]
	[24] -1	0	0x0000b400 - 0x0000b403 (0x4) IX[B]
	[25] -1	0	0x0000b000 - 0x0000b007 (0x8) IX[B]
	[26] -1	0	0x0000ac00 - 0x0000ac03 (0x4) IX[B]
	[27] -1	0	0x0000a800 - 0x0000a807 (0x8) IX[B]
	[28] -1	0	0x0000a400 - 0x0000a407 (0x8) IX[B]
	[29] -1	0	0x0000a000 - 0x0000a01f (0x20) IX[B]
	[30] -1	0	0x0000f000 - 0x0000f00f (0x10) IX[B]
	[31] -1	0	0x0000e000 - 0x0000e007 (0x8) IX[B]
	[32] -1	0	0x0000e400 - 0x0000e41f (0x20) IX[B]
	[33] -1	0	0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
	[34] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[35] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(**) RADEON(0): RADEONPreInit
(II) RADEON(0): MMIO registers at 0xe7000000: size 64KB
(II) RADEON(0): PCI bus 3 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "RenderAccel" "true"
(**) RADEON(0): Option "DRI" "true"
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 0.1.0
	ABI class: X.Org Video Driver, version 1.2
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(==) RADEON(0): X server will not keep DPI constant for all screen sizes
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 1.2
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI Radeon 9600XT AR (AGP)" (ChipID = 0x4152)
(--) RADEON(0): Linear framebuffer at 0xc0000000
(II) RADEON(0): AGP card detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:03:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:03:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.25.0
(==) RADEON(0): Page Flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=131072K, accessible=262144K (PCI BAR=262144K)
(--) RADEON(0): Mapped VideoRAM: 131072 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module already built-in
(II) RADEON(0): I2C bus "DDC" initialized.
(II) RADEON(0): Legacy BIOS detected
(II) RADEON(0): Connector0: DDCType-2, DACType-1, TMDSType-0, ConnectorType-3
(II) RADEON(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 2, Detected Type: 3
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 3, Detected Type: 0
(II) RADEON(0): EDID data from the display on 1st port ----------------------
(II) RADEON(0): Manufacturer: BNQ  Model: 76d5  Serial#: 11401
(II) RADEON(0): Year: 2006  Week: 37
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max H-Image Size [cm]: horiz.: 38  vert.: 30
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.640 redY: 0.340   greenX: 0.290 greenY: 0.610
(II) RADEON(0): blueX: 0.140 blueY: 0.070   whiteX: 0.310 whiteY: 0.330
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported Future Video Modes:
(II) RADEON(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) RADEON(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) RADEON(0): #2: hsize: 1280  vsize 1024  refresh: 72  vid: 35969
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
(II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 25.2 MHz   Image Size:  376 x 301 mm
(II) RADEON(0): h_active: 640  h_sync: 656  h_sync_end 752 h_blank_end 800 h_border: 0
(II) RADEON(0): v_active: 350  v_sync: 387  v_sync_end 389 v_blanking: 449 v_border: 0
(II) RADEON(0): Ranges: V min: 56  V max: 76 Hz, H min: 31  H max: 83 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: BenQ FP93GX
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 	00ffffffffffff0009d1d576892c0000
(II) RADEON(0): 	2510010380261e78eac5c6a3574a9c23
(II) RADEON(0): 	124f54bdef80714f8180818c01010101
(II) RADEON(0): 	010101010101302a009851002a403070
(II) RADEON(0): 	1300782d1100001ed50980a0205e6310
(II) RADEON(0): 	10605208782d1100001a000000fd0038
(II) RADEON(0): 	4c1f530e000a202020202020000000fc
(II) RADEON(0): 	0042656e51204650393347580a2000b1
(II) RADEON(0): 
(II) RADEON(0): Port1:
 Monitor   -- TMDS
 Connector -- DVI-I
 DAC Type  -- TVDAC/ExtDAC
 TMDS Type -- Internal
 DDC Type  -- DVI_DDC
(II) RADEON(0): Port2:
 Monitor   -- NONE
 Connector -- VGA
 DAC Type  -- Primary
 TMDS Type -- NONE
 DDC Type  -- VGA_DDC
(II) RADEON(0): ---- Primary Head:   Port1 ---- 
(II) RADEON(0): ---- Secondary Head: Not used ----
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000; xclk=30000
(II) RADEON(0): DFP table revision: 4
(II) RADEON(0): Panel infos found from DDC detailed: 1280x1024
(WW) RADEON(0): Failed to detect secondary monitor, MergedFB/Clone mode disabled
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEON(0): Validating modes on Primary head ---------
(II) RADEON(0): DFP table revision: 4
(II) RADEON(0): Valid Mode from Detailed timing table: 1280x1024
(II) RADEON(0): Valid Mode from Detailed timing table: 640x350
(II) RADEON(0): Valid Mode from standard timing table: 1152x864
(II) RADEON(0): Valid Mode from standard timing table: 1280x1024
(II) RADEON(0): Valid Mode from established timing table: 1280x1024
(II) RADEON(0): Valid Mode from established timing table: 1024x768
(II) RADEON(0): Valid Mode from established timing table: 1024x768
(II) RADEON(0): Valid Mode from established timing table: 1024x768
(II) RADEON(0): Valid Mode from established timing table: 832x624
(II) RADEON(0): Valid Mode from established timing table: 800x600
(II) RADEON(0): Valid Mode from established timing table: 800x600
(II) RADEON(0): Valid Mode from established timing table: 800x600
(II) RADEON(0): Valid Mode from established timing table: 640x480
(II) RADEON(0): Valid Mode from established timing table: 640x480
(II) RADEON(0): Valid Mode from established timing table: 640x480
(II) RADEON(0): Total of 15 mode(s) found.
(II) RADEON(0): Total number of valid DDC mode(s) found: 15
(--) RADEON(0): Virtual size is 1280x1024 (pitch 1280)
(**) RADEON(0): *Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1280x1024"  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync
(**) RADEON(0):  Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1280x1024"  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync
(**) RADEON(0):  Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1280x1024"  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync
(**) RADEON(0):  Default mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1152x864"  108.00  1152 1328 1440 1688  864 1025 1028 1066 +hsync +vsync
(**) RADEON(0):  Default mode "1024x768": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1024x768"  108.00  1024 1328 1440 1688  768 1025 1028 1066 -hsync -vsync
(**) RADEON(0):  Default mode "1024x768": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1024x768"  108.00  1024 1328 1440 1688  768 1025 1028 1066 -hsync -vsync
(**) RADEON(0):  Default mode "1024x768": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1024x768"  108.00  1024 1328 1440 1688  768 1025 1028 1066 +hsync +vsync
(**) RADEON(0):  Default mode "832x624": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "832x624"  108.00  832 1328 1440 1688  624 1025 1028 1066 -hsync -vsync
(**) RADEON(0):  Default mode "800x600": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "800x600"  108.00  800 1328 1440 1688  600 1025 1028 1066 +hsync +vsync
(**) RADEON(0):  Default mode "800x600": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "800x600"  108.00  800 1328 1440 1688  600 1025 1028 1066 +hsync +vsync
(**) RADEON(0):  Default mode "800x600": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "800x600"  108.00  800 1328 1440 1688  600 1025 1028 1066 +hsync +vsync
(**) RADEON(0):  Default mode "640x480": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "640x480"  108.00  640 1328 1440 1688  480 1025 1028 1066 -hsync -vsync
(**) RADEON(0):  Default mode "640x480": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "640x480"  108.00  640 1328 1440 1688  480 1025 1028 1066 -hsync -vsync
(**) RADEON(0):  Default mode "640x480": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "640x480"  108.00  640 1328 1440 1688  480 1025 1028 1066 -hsync -vsync
(**) RADEON(0):  Driver mode "640x350": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "640x350"  108.00  640 1328 1440 1688  350 1025 1028 1066 +hsync -vsync
(--) RADEON(0): Display dimensions: (380, 300) mm
(--) RADEON(0): DPI set to (85, 86)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module already built-in
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.2.0
	ABI class: X.Org Video Driver, version 1.2
(==) RADEON(0): Assuming overlay scaler buffer width is 1920
(II) RADEON(0): MM_TABLE: 01-0c-00-1f-06-00-00-66-02-00-00-06-00-07
(!!) RADEON(0): For information on using the multimedia capabilities
	of this adapter, please see http://gatos.sf.net.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0xe7000000 - 0xe700ffff (0x10000) MX[B]
	[1] 0	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B]
	[2] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[3] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[4] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[5] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[6] -1	0	0xe5000000 - 0xe500007f (0x80) MX[B]
	[7] -1	0	0xe9000000 - 0xe90001ff (0x200) MX[B]
	[8] -1	0	0xea003000 - 0xea00303f (0x40) MX[B]
	[9] -1	0	0xea002000 - 0xea0027ff (0x800) MX[B]
	[10] -1	0	0xea005000 - 0xea005fff (0x1000) MX[B]
	[11] -1	0	0xea004000 - 0xea0040ff (0x100) MX[B]
	[12] -1	0	0xea001000 - 0xea001fff (0x1000) MX[B]
	[13] -1	0	0xea000000 - 0xea000fff (0x1000) MX[B]
	[14] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[15] -1	0	0xe7000000 - 0xe700ffff (0x10000) MX[B](B)
	[16] -1	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
	[17] -1	0	0xe7010000 - 0xe701ffff (0x10000) MX[B](B)
	[18] -1	0	0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
	[19] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
	[20] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
	[21] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
	[22] 0	0	0x0000d000 - 0x0000d0ff (0x100) IX[B]
	[23] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[24] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[25] -1	0	0x0000c000 - 0x0000c07f (0x80) IX[B]
	[26] -1	0	0x0000b800 - 0x0000b80f (0x10) IX[B]
	[27] -1	0	0x0000b400 - 0x0000b403 (0x4) IX[B]
	[28] -1	0	0x0000b000 - 0x0000b007 (0x8) IX[B]
	[29] -1	0	0x0000ac00 - 0x0000ac03 (0x4) IX[B]
	[30] -1	0	0x0000a800 - 0x0000a807 (0x8) IX[B]
	[31] -1	0	0x0000a400 - 0x0000a407 (0x8) IX[B]
	[32] -1	0	0x0000a000 - 0x0000a01f (0x20) IX[B]
	[33] -1	0	0x0000f000 - 0x0000f00f (0x10) IX[B]
	[34] -1	0	0x0000e000 - 0x0000e007 (0x8) IX[B]
	[35] -1	0	0x0000e400 - 0x0000e41f (0x20) IX[B]
	[36] -1	0	0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
	[37] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[38] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(**) RADEON(0): RADEONScreenInit c0000000 0 0
(**) RADEON(0): Map: 0xc0000000, 0x08000000
(==) RADEON(0): Write-combining range (0xc0000000,0x8000000)
(**) RADEON(0): RADEONSave
(**) RADEON(0): RADEONSaveMode(0x820ab08)
(**) RADEON(0): Read: 0x00080002 0x00020020 0x00000000
(**) RADEON(0): Read: rd=2, fd=32, pd=2
(**) RADEON(0): Read: 0x00000000 0x00000000 0x00000000
(**) RADEON(0): Read: rd=0, fd=0, pd=0
(**) RADEON(0): RADEONSaveMode returns 0x820ab08
(==) RADEON(0): Using 24 bit depth buffer
(**) RADEON(0): RADEONInitMemoryMap() : 
(**) RADEON(0):   mem_size         : 0x08000000
(**) RADEON(0):   MC_FB_LOCATION   : 0xc7ffc000
(**) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(II) RADEON(0): Depth moves disabled by default
(**) RADEON(0): Setting up initial surfaces
(**) RADEON(0): Setting up accel memmap
(II) RADEON(0): CP in BM mode
(II) RADEON(0): Using 8 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 5 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1280,8191)
(II) RADEON(0): Reserved area from (0,1024) to (1280,1026)
(II) RADEON(0): Largest offscreen area available: 1280 x 7165
(II) RADEON(0): Will use front buffer at offset 0x0
(II) RADEON(0): Will use back buffer at offset 0x1400000
(II) RADEON(0): Will use depth buffer at offset 0x1900000
(II) RADEON(0): Will use 100352 kb for textures at offset 0x1e00000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:03:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:03:00.0
(II) RADEON(0): [drm] DRM interface version 1.3
(II) RADEON(0): [drm] created "radeon" driver at busid "pci:0000:03:00.0"
(II) RADEON(0): [drm] added 8192 byte SAREA at 0xf9223000
(II) RADEON(0): [drm] mapped SAREA 0xf9223000 to 0xb7bf8000
(II) RADEON(0): [drm] framebuffer handle = 0xc0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(==) RADEON(0): Using AGP 8x
(==) RADEON(0): AGP Fast Writes disabled
(II) RADEON(0): [agp] Mode 0x1f00420a [AGP 0x10de/0x01e0; Card 0x1002/0x4152]
(II) RADEON(0): [agp] 8192 kB allocated with handle 0x00000001
(II) RADEON(0): [agp] ring handle = 0xe0000000
(II) RADEON(0): [agp] Ring mapped at 0xb7a49000
(II) RADEON(0): [agp] ring read ptr handle = 0xe0101000
(II) RADEON(0): [agp] Ring read ptr mapped at 0xb7f49000
(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xe0102000
(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xaf781000
(II) RADEON(0): [agp] GART texture map handle = 0xe0302000
(II) RADEON(0): [agp] GART Texture map mapped at 0xaf2a1000
(II) RADEON(0): [drm] register handle = 0xe7000000
(II) RADEON(0): [dri] Visual configs initialized
(**) RADEON(0): Initializing fb layer
(**) RADEON(0): RADEONModeInit()
1280x1024     108.00  1280 1328 1440 1688  1024 1025 1028 1066 (24,32) +H +V
(**) RADEON(0): dc=10800, of=21600, fd=96, pd=2
(**) RADEON(0): RADEONInit returns 0x820b4c4
(**) RADEON(0): RADEONRestoreMode(0x820b4c4)
(**) RADEON(0): RADEONRestoreMemMapRegisters() : 
(**) RADEON(0):   MC_FB_LOCATION   : 0xc7ffc000
(**) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(**) RADEON(0):   Map Changed ! Applying ...
(**) RADEON(0):   Map applied, resetting engine ...
(**) RADEON(0): Updating display base addresses...
(**) RADEON(0): Memory map updated.
(**) RADEON(0): Programming CRTC1, offset: 0x00000000
(**) RADEON(0): Wrote: 0x0000000c 0x00010060 0x00000000 (0x0000bf00)
(**) RADEON(0): Wrote: rd=12, fd=96, pd=1
(**) RADEON(0): GRPH_BUFFER_CNTL from 30004c4c to 202c7c7c
(**) RADEON(0): RADEONSaveScreen(0)
(**) RADEON(0): Initializing backing store
(==) RADEON(0): Backing store disabled
(**) RADEON(0): DRI Finishing init !
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [DRI] installation complete
(**) RADEON(0): EngineRestore (32/32)
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 21
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0):   MC_FB_LOCATION  was: 0xc7ffc000 is: 0xc7ffc000
(WW) RADEON(0):   MC_AGP_LOCATION was: 0xffffffc0 is: 0xe07fe000
(**) RADEON(0): GRPH_BUFFER_CNTL from 30004c4c to 202c7c7c
(II) RADEON(0): Direct rendering enabled
(**) RADEON(0): Setting up final surfaces
(**) RADEON(0): Initializing Acceleration
(II) RADEON(0): Render acceleration unsupported on Radeon 9500/9700 and newer.
(II) RADEON(0): Render acceleration disabled
(**) RADEON(0): EngineInit (32/32)
(**) RADEON(0): Pitch for acceleration = 160
(**) RADEON(0): EngineRestore (32/32)
(**) RADEON(0): Option "XaaNoOffscreenPixmaps" "true"
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Indirect CPU to Screen color expansion
	Solid Lines
	Scanline Image Writes
	Setting up tile and stipple cache:
		32 128x128 slots
		32 256x256 slots
		16 512x512 slots
(II) RADEON(0): Acceleration enabled
(**) RADEON(0): Initializing DPMS
(**) RADEON(0): Initializing Cursor
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor (scanline 1026)
(II) RADEON(0): Largest offscreen area available: 1280 x 7161
(**) RADEON(0): Initializing color map
(**) RADEON(0): Initializing DGA
(**) RADEON(0): Initializing Xv
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module already built-in
(II) RADEON(0): Using R200 i2c bus access method
(II) RADEON(0): I2C bus "Radeon multimedia bus" initialized.
(II) Loading sub module "fi1236"
(II) LoadModule: "fi1236"
(II) Loading /usr/lib/xorg/modules/multimedia//fi1236_drv.so
(II) Module fi1236: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 1.2
(II) Loading sub module "uda1380"
(II) LoadModule: "uda1380"
(II) Loading /usr/lib/xorg/modules/multimedia//uda1380_drv.so
(II) Module uda1380: vendor="X.Org Foundation"
	compiled for 4.3.99.902, module version = 1.0.0
	ABI class: X.Org Video Driver, version 1.2
(II) Loading sub module "msp3430"
(II) LoadModule: "msp3430"
(II) Loading /usr/lib/xorg/modules/multimedia//msp3430_drv.so
(II) Module msp3430: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 1.2
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia//theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 1.2
(II) RADEON(0): No response from device 0 on VIP bus
(II) RADEON(0): Device 1 on VIP bus ids as 0x4d541002
(II) RADEON(0): No response from device 2 on VIP bus
(II) RADEON(0): No response from device 3 on VIP bus
(II) RADEON(0): Detected Rage Theatre as device 1 on VIP bus with id 0x4d541002
(II) RADEON(0): Detected Rage Theatre revision 00000003
(II) RADEON(0): video decoder type is 0x7530 (BIOS value) versus 0x7530 (current PLL setting)
(II) RADEON(0): Composite connector is port 2
(II) RADEON(0): SVideo connector is port 6
(II) RADEON(0): Rage Theatre: Connectors (detected): tuner=0, composite=2, svideo=6
(II) RADEON(0): RageTheatre: Connectors (using): tuner=0, composite=2, svideo=6
(II) RADEON(0): video decoder type used: 0x0006
(II) RADEON(0): Going to load the corresponding theatre module
(II) Loading sub module "theatre"
(II) LoadModule: "theatre"
(II) Loading /usr/lib/xorg/modules/multimedia//theatre_drv.so
(II) Module theatre: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 1.2
(II) RADEON(0): Rage Theatre setting standard 0x0000
(II) RADEON(0): Rage Theatre setting standard 0x0000
(II) RADEON(0): Rage Theatre setting standard 0x0000
(WW) RADEON(0): Option "AllowGLXWithComposite" is not used
(WW) RADEON(0): Option "AddARGBGLXVisuals" is not used
(**) RADEON(0): RADEONScreenInit finished
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:03:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:03:00.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r300_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(**) Option "Protocol" "Auto"
(**) Mouse1: Device: "/dev/input/mice"
(**) Mouse1: Protocol: "Auto"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/input/mice"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse1: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse1: Buttons: 11
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard1: XkbModel: "pc105"
(**) Option "XkbLayout" "ch"
(**) Keyboard1: XkbLayout: "ch"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(--) Mouse1: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse1: ps2EnableDataReporting: succeeded
(**) RADEON(0): RADEONSaveScreen(2)
(**) RADEON(0): RADEONSaveScreen(2)
(**) RADEON(0): RADEONDisplayPowerManagementSet(0,0x0)
(II) Mouse autoprobe: Disabling secondary wheel
Ultima modifica di Loris il dom 9 mar 2008, 9:47, modificato 1 volta in totale.
Motivazione: Usare il tag code o allegare il file al post

Helvete
Linux 0.x
Linux 0.x
Messaggi: 12
Iscritto il: sab 8 mar 2008, 20:10

Re: le avventure di Xorg e i 75hz

Messaggio da Helvete »

e il file di configurazione

Codice: Seleziona tutto

# File generated by xorgconfig.

#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# 
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# 
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# 
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#

# **********************************************************************
# Refer to the xorg.conf(5x) man page for details about the format of 
# this file.
# **********************************************************************

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"  	# Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the font modules
#    Load        "type1"
    Load        "freetype"
#    Load        "xtt"

# This loads the GLX module
    Load       "glx"
# This loads the DRI module
    Load       "dri"

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

#    RgbPath	"/usr/share/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# 
# 

    FontPath   "/usr/share/fonts/TTF"
    FontPath   "/usr/share/fonts/OTF"
    FontPath   "/usr/share/fonts/Type1"
    FontPath   "/usr/share/fonts/misc"
    FontPath   "/usr/share/fonts/75dpi/:unscaled"
#    FontPath   "/usr/lib/X11/fonts/local/"
    FontPath   "/usr/lib/X11/fonts/misc/"
    FontPath   "/usr/lib/X11/fonts/75dpi/:unscaled"
    FontPath   "/usr/lib/X11/fonts/100dpi/:unscaled"
    FontPath   "/usr/lib/X11/fonts/Speedo/"
    FontPath   "/usr/lib/X11/fonts/Type1/"
    FontPath   "/usr/lib/X11/fonts/TTF/"
    FontPath   "/usr/lib/X11/fonts/OTF/"
    FontPath   "/usr/lib/X11/fonts/cyrillic/"
    FontPath   "/usr/lib/X11/fonts/75dpi/"
    FontPath   "/usr/lib/X11/fonts/100dpi/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/lib/xorg/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is 
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.

#    Option "DontVTSwitch"

# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client. 

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings. 

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier	"Keyboard1"
    Driver	"kbd"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option     "Protocol"      "Xqueue"

    Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option	"Xleds"      "1 2 3"

#    Option "LeftAlt"     "Meta"
#    Option "RightAlt"    "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"    "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"   "de"
# or:
#    Option "XkbLayout"   "de"
#    Option "XkbVariant"  "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions"  "ctrl:swapcaps"

# These are the default XKB settings for Xorg
#    Option "XkbRules"    "xorg"
#    Option "XkbModel"    "pc105"
#    Option "XkbLayout"   "us"
#    Option "XkbVariant"  ""
#    Option "XkbOptions"  ""

#    Option "XkbDisable"

    Option "XkbRules"	"xorg"
    Option "XkbModel"	"pc105"
    Option "XkbLayout"	"ch"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier	"Mouse1"
    Driver	"mouse"
    Option "Protocol"    "Auto"	# Auto detect
    Option "Device"      "/dev/input/mice"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"	"Xqueue"

# Mouse-speed setting for PS/2 mouse.

#    Option "Resolution"	"256"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"	"9600"
#    Option "SampleRate"	"150"

# Mouse wheel mapping.  Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7.   Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.

    Option "ZAxisMapping"   "4 5 6 7"

# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections 
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice" 
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier  "benq"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync   31.0 - 81.0

#    HorizSync	30-64         # multisync
#    HorizSync	31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync	15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 50-76

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier	"Standard VGA"
    VendorName	"Unknown"
    BoardName	"Unknown"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset	"generic"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver     "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# intalled.

#    BusID      "PCI:0:10:0"

#    VideoRam	256

#    Clocks	25.2 28.3

EndSection

# Device configured by xorgconfig:

Section "Device"
    Identifier  "asus9600"
    Driver      "radeon"
    Option	"RenderAccel"		"true"
    Option	"AllowGLXWithComposite"	"true"
    Option	"XAANoOffscreenPixmaps"	"true"
    Option	"AddARGBGLXVisuals"	"true"
    Option	"DRI"			"true"
    #VideoRam    262144
    # Insert Clocks lines here if appropriate
EndSection


# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen 1"
    Device      "asus9600"
    Monitor     "benq"
    DefaultDepth 24

    Subsection "Display"
        Depth       8
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1280x1024"
        ViewPort    0 0
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.

    Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    Option "AIGLX" "true"

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

Section "DRI"
   Mode 0666
EndSection

Section "Extensions"
   Option "Composite" "Enable"
EndSection
nessun errore apparente nel log e nel file di configurazione... non so piu dove mettere le mani!
Ultima modifica di Loris il dom 9 mar 2008, 9:48, modificato 1 volta in totale.
Motivazione: Usare il tag code o allegare il file al post

Avatar utente
conraid
Staff
Staff
Messaggi: 13631
Iscritto il: gio 14 lug 2005, 0:00
Nome Cognome: Corrado Franco
Slackware: current64
Desktop: kde
Località: Livorno
Contatta:

Re: le avventure di Xorg e i 75hz

Messaggio da conraid »

La prossima volta metti il codice con il tag "Code" invece di Quote, almeno non lo mostra tutto nel post.

Comunque se hai impostato bene le frequenze orizzontali e verticali ed ancora non ti va a 75 prova con le modline.
Cerca quella che ti soddisfa con xvidtune e poi inseriscila in xorg.conf

Non so che monitor hai, comunque negli LCD solitamente si usa 60HZ. Anche io comunque ho 75Hz ma non c'è quella differenza che c'è nei CRT (dove come minimo ci vuole un 85hx) tale da creare disturbi agli occhi così evidenti se il monitor è buono. E te lo dice uno che con gli occhi non è proprio una lince.

Avatar utente
sardylan
Linux 3.x
Linux 3.x
Messaggi: 993
Iscritto il: mar 24 apr 2007, 9:21
Nome Cognome: Luca Cireddu
Slackware: current 64bits
Kernel: 3.16
Desktop: KDE 4.14
Distribuzione: Debian - CLFS
Località: Cagliari
Contatta:

Re: le avventure di Xorg e i 75hz

Messaggio da sardylan »

Offtopic: Fai un favore??? Metti i file tra i tag code invece che quote??? Così si legge meglio...
Prova a sostituire il valore del refresh verticale da 60-76 a 75, con valore fisso, senza intervallo... Dovrebbe andare...

Edit:: Scusate... Non ho visto il post di conraid...

birg81
Linux 3.x
Linux 3.x
Messaggi: 760
Iscritto il: lun 16 gen 2006, 10:57
Nome Cognome: Biagio
Slackware: 12.2
Kernel: 3.4.7
Desktop: LxDE
Distribuzione: ArchLinux
Località: Castellammare di Stabia (NA)
Contatta:

Re: le avventure di Xorg e i 75hz

Messaggio da birg81 »

sardylan ha scritto:Offtopic: Fai un favore??? Metti i file tra i tag code invece che quote??? Così si legge meglio...
Prova a sostituire il valore del refresh verticale da 60-76 a 75, con valore fisso, senza intervallo... Dovrebbe andare...

Edit:: Scusate... Non ho visto il post di conraid...
INFATTI STAVO PER DIRLO IO!!!!

Avatar utente
Toni
Linux 3.x
Linux 3.x
Messaggi: 999
Iscritto il: lun 30 gen 2006, 22:08
Slackware: slackware-14
Kernel: 3.10.5
Desktop: i3
Località: milano

Re: le avventure di Xorg e i 75hz

Messaggio da Toni »

INFATTI STAVO PER DIRLO IO!!!!
Offtopic: non siamo utenti slackware , stiamo soltanto partecipando ad una gara in cui vince chi posta di più e più velocemente :D :D :D :D :D
a proposito ma cosa si vince? :lol: :lol:

Mario Vanoni
Iper Master
Iper Master
Messaggi: 3174
Iscritto il: lun 3 set 2007, 21:20
Nome Cognome: Mario Vanoni
Slackware: 12.2
Kernel: 3.0.4 statico
Desktop: fluxbox/seamonkey
Località: Cuasso al Monte (VA)

Re: le avventure di Xorg e i 75hz

Messaggio da Mario Vanoni »

il_notturnista ha scritto:
INFATTI STAVO PER DIRLO IO!!!!
Offtopic: non siamo utenti slackware , stiamo soltanto partecipando ad una gara in cui vince chi posta di più e più velocemente :D :D :D :D :D
a proposito ma cosa si vince? :lol: :lol:
OT
Quindi la mia vecchia offesa al forum, messaggi++

Avatar utente
Toni
Linux 3.x
Linux 3.x
Messaggi: 999
Iscritto il: lun 30 gen 2006, 22:08
Slackware: slackware-14
Kernel: 3.10.5
Desktop: i3
Località: milano

Re: le avventure di Xorg e i 75hz

Messaggio da Toni »

Offtopic: vanoni sei un grande :lol: :lol:

Rispondi