Sk tv dvb-s
Moderatore: Staff
Regole del forum
1) Citare sempre la versione di Slackware usata e la versione del Kernel. Questi dati aiutano le persone che possono rispondere.
2) Citare il tipo di hardware coinvolto in modo dettagliato.
3) Leggere attentamente le risposte ricevute
4) Scrivere i messaggi con il colore di default, evitare altri colori.
5) Scrivere in Italiano o in Inglese, se possibile grammaticalmente corretto, evitate stili di scrittura poco chiari, quindi nessuna abbreviazione tipo telegramma o scrittura stile SMS o CHAT. Non usare termini gergali come procio, mobo e simili per identificare i componenti hardware.
6) Appena registrati è consigliato presentarsi nel forum dedicato.
La non osservanza delle regole porta a provvedimenti di vari tipo da parte dello staff, in particolare la non osservanza della regola 5 porta alla cancellazione del post e alla segnalazione dell'utente. In caso di recidività l'utente rischia il ban temporaneo.
1) Citare sempre la versione di Slackware usata e la versione del Kernel. Questi dati aiutano le persone che possono rispondere.
2) Citare il tipo di hardware coinvolto in modo dettagliato.
3) Leggere attentamente le risposte ricevute
4) Scrivere i messaggi con il colore di default, evitare altri colori.
5) Scrivere in Italiano o in Inglese, se possibile grammaticalmente corretto, evitate stili di scrittura poco chiari, quindi nessuna abbreviazione tipo telegramma o scrittura stile SMS o CHAT. Non usare termini gergali come procio, mobo e simili per identificare i componenti hardware.
6) Appena registrati è consigliato presentarsi nel forum dedicato.
La non osservanza delle regole porta a provvedimenti di vari tipo da parte dello staff, in particolare la non osservanza della regola 5 porta alla cancellazione del post e alla segnalazione dell'utente. In caso di recidività l'utente rischia il ban temporaneo.
Sk tv dvb-s
La mia sk satellitare dvb (una Skaystar2) è riconosciuta dal kernel e facendo un lsmod vedo il modulo caricato, in /dev/ dovrebbe esserci una directory dvb che però non viene creato, infatti kaffeine non la riconosce, cosa potrei fare per fargliela digerire?
Ormai è ora di fare nannaDunque ho seguito questo link (per la versione sk pci) e tutto funziona con xine riesco a vedere la tv sat. Ma con kaffeine no, non lo riconosce nemmeno se lo ricompilo io.Firetux ha scritto:http://www.fedoraitalia.org/modules/wfs ... icleid=237
questa?
Un altro problema che ho riscontrato è che al riavvio del pc in /dev/ la directori dvb mi scompare, dovendo quidni ricreare tutto a manina.
Consigli?
usi udev, udev+hotplug oppure devfs?py67 ha scritto:Dunque ho seguito questo link (per la versione sk pci) e tutto funziona con xine riesco a vedere la tv sat. Ma con kaffeine no, non lo riconosce nemmeno se lo ricompilo io.Firetux ha scritto:http://www.fedoraitalia.org/modules/wfs ... icleid=237
questa?
Un altro problema che ho riscontrato è che al riavvio del pc in /dev/ la directori dvb mi scompare, dovendo quidni ricreare tutto a manina.
Consigli?
Domanda difficilissima per un utonto, comunque, ho la slackware 10.2, non current, ho installato hal, dbus e c'è pure hotplug, infatti ora riesco a fare il montaggio automatico della penna usb ecc...whites11 ha scritto:usi udev, udev+hotplug oppure devfs?py67 ha scritto:Dunque ho seguito questo link (per la versione sk pci) e tutto funziona con xine riesco a vedere la tv sat. Ma con kaffeine no, non lo riconosce nemmeno se lo ricompilo io.Firetux ha scritto:http://www.fedoraitalia.org/modules/wfs ... icleid=237
questa?
Un altro problema che ho riscontrato è che al riavvio del pc in /dev/ la directori dvb mi scompare, dovendo quidni ricreare tutto a manina.
Consigli?
quindi direi kernel 2.6.x ...giusto? probabilmente udev non ti crea il device. prova a postare il contenuto del file /etc/udev/rules.d/udev.rulespy67 ha scritto:Domanda difficilissima per un utonto, comunque, ho la slackware 10.2, non current, ho installato hal, dbus e c'è pure hotplug, infatti ora riesco a fare il montaggio automatico della penna usb ecc...whites11 ha scritto:usi udev, udev+hotplug oppure devfs?py67 ha scritto: Dunque ho seguito questo link (per la versione sk pci) e tutto funziona con xine riesco a vedere la tv sat. Ma con kaffeine no, non lo riconosce nemmeno se lo ricompilo io.
Un altro problema che ho riscontrato è che al riavvio del pc in /dev/ la directori dvb mi scompare, dovendo quidni ricreare tutto a manina.
Consigli?
Si attualmente uso il kernel 2.6.13 e il contenuto di udev.rules è:
# /etc/udev/udev.rules: device naming rules for udev
#
# There are a number of modifiers that are allowed to be used in some of the
# fields. See the udev man page for a full description of them.
# all block devices
SUBSYSTEM="block", GROUP="disk"
### cdrom symlinks and other good cdrom naming
##BUS="ide", KERNEL="hd[a-z]", PROGRAM="/etc/udev/scripts/cdsymlinks.sh %k", SYMLINK="%c{1} %c{2} %c{3} %c{4} %c{5} %c{6}"
##BUS="scsi", KERNEL="sr[0-9]*", PROGRAM="/etc/udev/scripts/cdsymlinks.sh %k", SYMLINK="%c{1} %c{2} %c{3} %c{4} %c{5} %c{6}"
##BUS="scsi", KERNEL="scd[a-z]", PROGRAM="/etc/udev/scripts/cdsymlinks.sh %k", SYMLINK="%c{1} %c{2} %c{3} %c{4} %c{5} %c{6}"
##
### devfs-names for ide-devices (uncomment only one)
### /dev/ide/.../{disc,cd} and /dev/{cdroms,discs}/* type names
##BUS="ide", KERNEL="hd*", PROGRAM="/etc/udev/scripts/ide-devfs.sh %k %b %n", NAME="%k", SYMLINK="%c{1} %c{2}", GROUP="%c{3}"
# permissions for IDE CD devices
BUS="ide", KERNEL="*[!0-9]", PROGRAM="/bin/cat /proc/ide/%k/media", RESULT="cdrom*", NAME="%k", GROUP="cdrom", MODE="0660"
# permissions for IDE floppy devices
BUS="ide", KERNEL="*[!0-9]", PROGRAM="/bin/cat /proc/ide/%k/media", RESULT="floppy*", NAME="%k", GROUP="floppy", MODE="0660"
# permissions for SCSI cd/sg/tape devices
BUS="scsi", KERNEL="s[grt][0-9]*", SYSFS{type}="5", NAME="%k", GROUP="cdrom", MODE="0660"
# disk devices
KERNEL="sd*", NAME="%k", GROUP="disk"
KERNEL="dasd*", NAME="%k", GROUP="disk"
KERNEL="ataraid*", NAME="%k", GROUP="disk"
# DRI devices
KERNEL="card*", NAME="dri/card%n", GROUP="video"
KERNEL="nvidia*", NAME="%k", GROUP="video"
KERNEL="3dfx*", NAME="%k", GROUP="video"
# ALSA devices
SUBSYSTEM="sound", GROUP="audio"
KERNEL="controlC[0-9]*", NAME="snd/%k", MODE="0666"
KERNEL="hw[CD0-9]*", NAME="snd/%k", MODE="0662"
KERNEL="pcm[CD0-9]*c", NAME="snd/%k", MODE="0662"
KERNEL="pcm[CD0-9]*p", NAME="snd/%k", MODE="0666"
KERNEL="midiC[D0-9]*", NAME="snd/%k", MODE="0666"
KERNEL="timer", NAME="snd/%k", MODE="0666"
KERNEL="seq", NAME="snd/%k", MODE="0666"
# capi devices
KERNEL="capi", NAME="capi20", SYMLINK="isdn/capi20"
KERNEL="capi*", NAME="capi/%n"
# cpu devices
KERNEL="cpu[0-9]*", NAME="cpu/%n/cpuid"
KERNEL="msr[0-9]*", NAME="cpu/%n/msr"
KERNEL="microcode", NAME="cpu/microcode"
# dm devices (ignore them)
KERNEL="dm-[0-9]*", NAME=""
# create a symlink named after the device map name
# note devmap_name comes with extras/multipath
#KERNEL="dm-[0-9]*", PROGRAM="/sbin/devmap_name %M %m", NAME="%k", SYMLINK="%c"
KERNEL="device-mapper", NAME="mapper/control"
# fb devices
KERNEL="fb[0-9]*", NAME="fb/%n", SYMLINK="%k", GROUP="video"
# floppy devices
KERNEL="fd[0-9]*", NAME="floppy/%n", SYMLINK="%k", GROUP="floppy", PROGRAM="/etc/udev/scripts/floppy-extra-devs.sh %k %b %n"
# i2c devices
KERNEL="i2c-[0-9]*", NAME="i2c/%n", SYMLINK="%k"
# input devices
KERNEL="mice", NAME="input/%k", MODE="0644"
KERNEL="mouse*", NAME="input/%k", MODE="0644"
KERNEL="event*", NAME="input/%k", MODE="0600"
KERNEL="js*", NAME="input/%k", MODE="664"
KERNEL="ts*", NAME="input/%k", MODE="0600"
# loop devices
KERNEL="loop[0-9]*", NAME="loop/%n", SYMLINK="%k", GROUP="disk"
# md block devices
KERNEL="md[0-9]*", NAME="md/%n", SYMLINK="%k", GROUP="disk"
# aoe char devices,
SUBSYSTEM="aoe", KERNEL="discover", NAME="etherd/%k", GROUP="disk", MODE="0220"
SUBSYSTEM="aoe", KERNEL="err", NAME="etherd/%k", GROUP="disk", MODE="0440"
SUBSYSTEM="aoe", KERNEL="interfaces", NAME="etherd/%k", GROUP="disk", MODE="0220"
# misc devices
KERNEL="agpgart", NAME="misc/%k", SYMLINK="%k"
KERNEL="psaux", NAME="misc/%k", SYMLINK="%k"
KERNEL="rtc", NAME="misc/%k", SYMLINK="%k", MODE="0664"
KERNEL="uinput", NAME="misc/%k", SYMLINK="%k"
KERNEL="inotify", NAME="misc/%k", SYMLINK="%k", MODE="0666"
# netlink devices
KERNEL="route", NAME="netlink/%k"
KERNEL="skip", NAME="netlink/%k"
KERNEL="usersock", NAME="netlink/%k"
KERNEL="fwmonitor", NAME="netlink/%k"
KERNEL="tcpdiag", NAME="netlink/%k"
KERNEL="nflog", NAME="netlink/%k"
KERNEL="xfrm", NAME="netlink/%k"
KERNEL="arpd", NAME="netlink/%k"
KERNEL="route6", NAME="netlink/%k"
KERNEL="ip6_fw", NAME="netlink/%k"
KERNEL="dnrtmsg", NAME="netlink/%k"
KERNEL="tap*", NAME="netlink/%k"
# network devices
KERNEL="tun", NAME="net/%k"
# ramdisk devices
KERNEL="ram[0-9]*", NAME="rd/%n", SYMLINK="%k"
# raw devices
KERNEL="raw[0-9]*", NAME="raw/%k", GROUP="disk"
KERNEL="ram*", NAME="%k", GROUP="disk"
# sound devices
KERNEL="adsp", NAME="sound/%k", SYMLINK="%k", GROUP="audio", MODE="0662"
KERNEL="adsp[0-9]*", NAME="sound/%k", SYMLINK="%k", GROUP="audio", MODE="0662"
KERNEL="audio", NAME="sound/%k", SYMLINK="%k", GROUP="audio", MODE="0662"
KERNEL="audio[0-9]*", NAME="sound/%k", SYMLINK="%k", GROUP="audio", MODE="0662"
KERNEL="dsp", NAME="sound/%k", SYMLINK="%k", GROUP="audio", MODE="0662"
KERNEL="dsp[0-9]*", NAME="sound/%k", SYMLINK="%k", GROUP="audio", MODE="0662"
KERNEL="mixer", NAME="sound/%k", SYMLINK="%k", GROUP="audio", MODE="0662"
KERNEL="mixer[0-9]*", NAME="sound/%k", SYMLINK="%k", GROUP="audio", MODE="0662"
KERNEL="sequencer", NAME="sound/%k", SYMLINK="%k", GROUP="audio", MODE="0662"
KERNEL="sequencer[0-9]*", NAME="sound/%k", SYMLINK="%k", GROUP="audio", MODE="0662"
# tty devices
KERNEL="console", NAME="%k", GROUP="tty", MODE="0600"
KERNEL="tty", NAME="%k", GROUP="tty", MODE="0666"
KERNEL="tty[0-9]*", NAME="vc/%n", SYMLINK="%k", GROUP="tty"
KERNEL="ttyS[0-9]*", NAME="tts/%n", SYMLINK="%k", GROUP="tty"
KERNEL="ttyUSB[0-9]*", NAME="tts/USB%n", GROUP="tty", MODE="0600"
KERNEL="ippp0", NAME="%k", GROUP="tty"
KERNEL="isdn*", NAME="%k", GROUP="tty"
KERNEL="dcbri*", NAME="%k", GROUP="tty"
KERNEL="ircomm*", NAME="%k", GROUP="tty"
# pty devices
KERNEL="ptmx", NAME="%k", GROUP="tty", MODE="0666"
KERNEL="pty[p-za-e][0-9a-f]*", NAME="pty/m%n", SYMLINK="%k", GROUP="tty"
KERNEL="tty[p-za-e][0-9a-f]*", NAME="pty/s%n", SYMLINK="%k", GROUP="tty"
# vc devices
KERNEL="vcs", NAME="vcc/0", SYMLINK="%k", GROUP="tty"
KERNEL="vcs[0-9]*", NAME="vcc/%n", SYMLINK="%k", GROUP="tty"
KERNEL="vcsa", NAME="vcc/a0", SYMLINK="%k", GROUP="tty"
KERNEL="vcsa[0-9]*", NAME="vcc/a%n", SYMLINK="%k", GROUP="tty"
# memory devices
KERNEL="random", NAME="%k", MODE="0664"
KERNEL="urandom", NAME="%k", MODE="0664"
KERNEL="mem", NAME="%k", GROUP="kmem", MODE="0640"
KERNEL="kmem", NAME="%k", GROUP="kmem", MODE="0640"
KERNEL="port", NAME="%k", GROUP="kmem", MODE="0640"
KERNEL="full", NAME="%k", MODE="0666"
KERNEL="null", NAME="%k", MODE="0666"
KERNEL="zero", NAME="%k", MODE="0666"
# usb devices
KERNEL="hiddev*", NAME="usb/%k"
KERNEL="auer*", NAME="usb/%k"
KERNEL="legousbtower*", NAME="usb/%k"
KERNEL="dabusb*", NAME="usb/%k"
BUS="usb", KERNEL="lp[0-9]*", NAME="usb/%k", GROUP="lp"
# v4l devices
KERNEL="video[0-9]*", NAME="v4l/video%n", SYMLINK="video%n", GROUP="video"
KERNEL="radio[0-9]*", NAME="v4l/radio%n", GROUP="video"
KERNEL="vbi[0-9]*", NAME="v4l/vbi%n", SYMLINK="vbi%n", GROUP="video"
KERNEL="vtx[0-9]*", NAME="v4l/vtx%n", GROUP="video"
# dvb devices
KERNEL="dvb*", PROGRAM="/etc/udev/scripts/dvb.sh %k", NAME="%c", GROUP="video", MODE="0660"
# Asterix Zaptel devices
KERNEL="zapctl", NAME="zap/ctl"
KERNEL="zaptimer", NAME="zap/timer"
KERNEL="zapchannel", NAME="zap/channel"
KERNEL="zappseudo", NAME="zap/pseudo"
KERNEL="zap[0-9]*", NAME="zap/%n"
# pilot/palm devices
KERNEL="pilot", NAME="%k", GROUP="uucp"
# jaz devices
KERNEL="jaz*", NAME="%k", GROUP="disk"
# zip devices
KERNEL="pocketzip*", NAME="%k", GROUP="disk"
KERNEL="zip*", NAME="%k", GROUP="disk"
# ls120 devices
KERNEL="ls120", NAME="%k", GROUP="disk"
# lp devices
KERNEL="lp*", NAME="%k", GROUP="lp"
KERNEL="irlpt", NAME="%k", GROUP="lp"
KERNEL="usblp", NAME="%k", GROUP="lp"
KERNEL="lp*", NAME="%k", GROUP="lp"
# tape devices
KERNEL="ht*", NAME="%k"
KERNEL="nht*", NAME="%k"
KERNEL="pt*", NAME="%k"
KERNEL="npt*", NAME="%k"
KERNEL="st*", NAME="%k"
KERNEL="nst*", NAME="%k"
KERNEL="osst*", NAME="%k"
KERNEL="nosst*", NAME="%k"
# diskonkey devices
KERNEL="diskonkey*", NAME="%k", GROUP="disk"
# rem_ide devices
KERNEL="microdrive*", NAME="%k", GROUP="disk"
# kbd devices
KERNEL="kbd", NAME="%k", MODE="0664"
# Sony Vaio Jogdial sonypi device
KERNEL="sonypi", NAME="%k", MODE="0666"
# packet devices
KERNEL="pktcdvd", NAME="pktcdvd/control", GROUP="cdrom", MODE="0660"
KERNEL="pktcdvd[0-9]*", NAME="pktcdvd/pktcdvd%n", GROUP="cdrom", MODE="0660"
# infiniband devices
KERNEL="umad*", NAME="infiniband/%k"
KERNEL="issm*", NAME="infiniband/%k"
## These lines are causing race conditions with the symlink to udevstart in
## /etc/hotplug.d/default/, so they are being commented out for now. Udev
## seems to work better that way... YMMV.
#
## be backward compatible for a while with the /etc/dev.d and /etc/hotplug.d/.
## systems run /etc/hotplug.d/ stuff only if we came from a hotplug event,
## not for udevstart
ENV{UDEVD_EVENT}=="1", RUN+="/sbin/udev_run_hotplugd"
#
## always run /etc/dev.d/ stuff for now
RUN+="/sbin/udev_run_devd"
# Firmware Helper - This is a requirement for loading firmware
ACTION=="add", SUBSYSTEM=="firmware", RUN+="/sbin/firmware_helper"
Ciao
# /etc/udev/udev.rules: device naming rules for udev
#
# There are a number of modifiers that are allowed to be used in some of the
# fields. See the udev man page for a full description of them.
# all block devices
SUBSYSTEM="block", GROUP="disk"
### cdrom symlinks and other good cdrom naming
##BUS="ide", KERNEL="hd[a-z]", PROGRAM="/etc/udev/scripts/cdsymlinks.sh %k", SYMLINK="%c{1} %c{2} %c{3} %c{4} %c{5} %c{6}"
##BUS="scsi", KERNEL="sr[0-9]*", PROGRAM="/etc/udev/scripts/cdsymlinks.sh %k", SYMLINK="%c{1} %c{2} %c{3} %c{4} %c{5} %c{6}"
##BUS="scsi", KERNEL="scd[a-z]", PROGRAM="/etc/udev/scripts/cdsymlinks.sh %k", SYMLINK="%c{1} %c{2} %c{3} %c{4} %c{5} %c{6}"
##
### devfs-names for ide-devices (uncomment only one)
### /dev/ide/.../{disc,cd} and /dev/{cdroms,discs}/* type names
##BUS="ide", KERNEL="hd*", PROGRAM="/etc/udev/scripts/ide-devfs.sh %k %b %n", NAME="%k", SYMLINK="%c{1} %c{2}", GROUP="%c{3}"
# permissions for IDE CD devices
BUS="ide", KERNEL="*[!0-9]", PROGRAM="/bin/cat /proc/ide/%k/media", RESULT="cdrom*", NAME="%k", GROUP="cdrom", MODE="0660"
# permissions for IDE floppy devices
BUS="ide", KERNEL="*[!0-9]", PROGRAM="/bin/cat /proc/ide/%k/media", RESULT="floppy*", NAME="%k", GROUP="floppy", MODE="0660"
# permissions for SCSI cd/sg/tape devices
BUS="scsi", KERNEL="s[grt][0-9]*", SYSFS{type}="5", NAME="%k", GROUP="cdrom", MODE="0660"
# disk devices
KERNEL="sd*", NAME="%k", GROUP="disk"
KERNEL="dasd*", NAME="%k", GROUP="disk"
KERNEL="ataraid*", NAME="%k", GROUP="disk"
# DRI devices
KERNEL="card*", NAME="dri/card%n", GROUP="video"
KERNEL="nvidia*", NAME="%k", GROUP="video"
KERNEL="3dfx*", NAME="%k", GROUP="video"
# ALSA devices
SUBSYSTEM="sound", GROUP="audio"
KERNEL="controlC[0-9]*", NAME="snd/%k", MODE="0666"
KERNEL="hw[CD0-9]*", NAME="snd/%k", MODE="0662"
KERNEL="pcm[CD0-9]*c", NAME="snd/%k", MODE="0662"
KERNEL="pcm[CD0-9]*p", NAME="snd/%k", MODE="0666"
KERNEL="midiC[D0-9]*", NAME="snd/%k", MODE="0666"
KERNEL="timer", NAME="snd/%k", MODE="0666"
KERNEL="seq", NAME="snd/%k", MODE="0666"
# capi devices
KERNEL="capi", NAME="capi20", SYMLINK="isdn/capi20"
KERNEL="capi*", NAME="capi/%n"
# cpu devices
KERNEL="cpu[0-9]*", NAME="cpu/%n/cpuid"
KERNEL="msr[0-9]*", NAME="cpu/%n/msr"
KERNEL="microcode", NAME="cpu/microcode"
# dm devices (ignore them)
KERNEL="dm-[0-9]*", NAME=""
# create a symlink named after the device map name
# note devmap_name comes with extras/multipath
#KERNEL="dm-[0-9]*", PROGRAM="/sbin/devmap_name %M %m", NAME="%k", SYMLINK="%c"
KERNEL="device-mapper", NAME="mapper/control"
# fb devices
KERNEL="fb[0-9]*", NAME="fb/%n", SYMLINK="%k", GROUP="video"
# floppy devices
KERNEL="fd[0-9]*", NAME="floppy/%n", SYMLINK="%k", GROUP="floppy", PROGRAM="/etc/udev/scripts/floppy-extra-devs.sh %k %b %n"
# i2c devices
KERNEL="i2c-[0-9]*", NAME="i2c/%n", SYMLINK="%k"
# input devices
KERNEL="mice", NAME="input/%k", MODE="0644"
KERNEL="mouse*", NAME="input/%k", MODE="0644"
KERNEL="event*", NAME="input/%k", MODE="0600"
KERNEL="js*", NAME="input/%k", MODE="664"
KERNEL="ts*", NAME="input/%k", MODE="0600"
# loop devices
KERNEL="loop[0-9]*", NAME="loop/%n", SYMLINK="%k", GROUP="disk"
# md block devices
KERNEL="md[0-9]*", NAME="md/%n", SYMLINK="%k", GROUP="disk"
# aoe char devices,
SUBSYSTEM="aoe", KERNEL="discover", NAME="etherd/%k", GROUP="disk", MODE="0220"
SUBSYSTEM="aoe", KERNEL="err", NAME="etherd/%k", GROUP="disk", MODE="0440"
SUBSYSTEM="aoe", KERNEL="interfaces", NAME="etherd/%k", GROUP="disk", MODE="0220"
# misc devices
KERNEL="agpgart", NAME="misc/%k", SYMLINK="%k"
KERNEL="psaux", NAME="misc/%k", SYMLINK="%k"
KERNEL="rtc", NAME="misc/%k", SYMLINK="%k", MODE="0664"
KERNEL="uinput", NAME="misc/%k", SYMLINK="%k"
KERNEL="inotify", NAME="misc/%k", SYMLINK="%k", MODE="0666"
# netlink devices
KERNEL="route", NAME="netlink/%k"
KERNEL="skip", NAME="netlink/%k"
KERNEL="usersock", NAME="netlink/%k"
KERNEL="fwmonitor", NAME="netlink/%k"
KERNEL="tcpdiag", NAME="netlink/%k"
KERNEL="nflog", NAME="netlink/%k"
KERNEL="xfrm", NAME="netlink/%k"
KERNEL="arpd", NAME="netlink/%k"
KERNEL="route6", NAME="netlink/%k"
KERNEL="ip6_fw", NAME="netlink/%k"
KERNEL="dnrtmsg", NAME="netlink/%k"
KERNEL="tap*", NAME="netlink/%k"
# network devices
KERNEL="tun", NAME="net/%k"
# ramdisk devices
KERNEL="ram[0-9]*", NAME="rd/%n", SYMLINK="%k"
# raw devices
KERNEL="raw[0-9]*", NAME="raw/%k", GROUP="disk"
KERNEL="ram*", NAME="%k", GROUP="disk"
# sound devices
KERNEL="adsp", NAME="sound/%k", SYMLINK="%k", GROUP="audio", MODE="0662"
KERNEL="adsp[0-9]*", NAME="sound/%k", SYMLINK="%k", GROUP="audio", MODE="0662"
KERNEL="audio", NAME="sound/%k", SYMLINK="%k", GROUP="audio", MODE="0662"
KERNEL="audio[0-9]*", NAME="sound/%k", SYMLINK="%k", GROUP="audio", MODE="0662"
KERNEL="dsp", NAME="sound/%k", SYMLINK="%k", GROUP="audio", MODE="0662"
KERNEL="dsp[0-9]*", NAME="sound/%k", SYMLINK="%k", GROUP="audio", MODE="0662"
KERNEL="mixer", NAME="sound/%k", SYMLINK="%k", GROUP="audio", MODE="0662"
KERNEL="mixer[0-9]*", NAME="sound/%k", SYMLINK="%k", GROUP="audio", MODE="0662"
KERNEL="sequencer", NAME="sound/%k", SYMLINK="%k", GROUP="audio", MODE="0662"
KERNEL="sequencer[0-9]*", NAME="sound/%k", SYMLINK="%k", GROUP="audio", MODE="0662"
# tty devices
KERNEL="console", NAME="%k", GROUP="tty", MODE="0600"
KERNEL="tty", NAME="%k", GROUP="tty", MODE="0666"
KERNEL="tty[0-9]*", NAME="vc/%n", SYMLINK="%k", GROUP="tty"
KERNEL="ttyS[0-9]*", NAME="tts/%n", SYMLINK="%k", GROUP="tty"
KERNEL="ttyUSB[0-9]*", NAME="tts/USB%n", GROUP="tty", MODE="0600"
KERNEL="ippp0", NAME="%k", GROUP="tty"
KERNEL="isdn*", NAME="%k", GROUP="tty"
KERNEL="dcbri*", NAME="%k", GROUP="tty"
KERNEL="ircomm*", NAME="%k", GROUP="tty"
# pty devices
KERNEL="ptmx", NAME="%k", GROUP="tty", MODE="0666"
KERNEL="pty[p-za-e][0-9a-f]*", NAME="pty/m%n", SYMLINK="%k", GROUP="tty"
KERNEL="tty[p-za-e][0-9a-f]*", NAME="pty/s%n", SYMLINK="%k", GROUP="tty"
# vc devices
KERNEL="vcs", NAME="vcc/0", SYMLINK="%k", GROUP="tty"
KERNEL="vcs[0-9]*", NAME="vcc/%n", SYMLINK="%k", GROUP="tty"
KERNEL="vcsa", NAME="vcc/a0", SYMLINK="%k", GROUP="tty"
KERNEL="vcsa[0-9]*", NAME="vcc/a%n", SYMLINK="%k", GROUP="tty"
# memory devices
KERNEL="random", NAME="%k", MODE="0664"
KERNEL="urandom", NAME="%k", MODE="0664"
KERNEL="mem", NAME="%k", GROUP="kmem", MODE="0640"
KERNEL="kmem", NAME="%k", GROUP="kmem", MODE="0640"
KERNEL="port", NAME="%k", GROUP="kmem", MODE="0640"
KERNEL="full", NAME="%k", MODE="0666"
KERNEL="null", NAME="%k", MODE="0666"
KERNEL="zero", NAME="%k", MODE="0666"
# usb devices
KERNEL="hiddev*", NAME="usb/%k"
KERNEL="auer*", NAME="usb/%k"
KERNEL="legousbtower*", NAME="usb/%k"
KERNEL="dabusb*", NAME="usb/%k"
BUS="usb", KERNEL="lp[0-9]*", NAME="usb/%k", GROUP="lp"
# v4l devices
KERNEL="video[0-9]*", NAME="v4l/video%n", SYMLINK="video%n", GROUP="video"
KERNEL="radio[0-9]*", NAME="v4l/radio%n", GROUP="video"
KERNEL="vbi[0-9]*", NAME="v4l/vbi%n", SYMLINK="vbi%n", GROUP="video"
KERNEL="vtx[0-9]*", NAME="v4l/vtx%n", GROUP="video"
# dvb devices
KERNEL="dvb*", PROGRAM="/etc/udev/scripts/dvb.sh %k", NAME="%c", GROUP="video", MODE="0660"
# Asterix Zaptel devices
KERNEL="zapctl", NAME="zap/ctl"
KERNEL="zaptimer", NAME="zap/timer"
KERNEL="zapchannel", NAME="zap/channel"
KERNEL="zappseudo", NAME="zap/pseudo"
KERNEL="zap[0-9]*", NAME="zap/%n"
# pilot/palm devices
KERNEL="pilot", NAME="%k", GROUP="uucp"
# jaz devices
KERNEL="jaz*", NAME="%k", GROUP="disk"
# zip devices
KERNEL="pocketzip*", NAME="%k", GROUP="disk"
KERNEL="zip*", NAME="%k", GROUP="disk"
# ls120 devices
KERNEL="ls120", NAME="%k", GROUP="disk"
# lp devices
KERNEL="lp*", NAME="%k", GROUP="lp"
KERNEL="irlpt", NAME="%k", GROUP="lp"
KERNEL="usblp", NAME="%k", GROUP="lp"
KERNEL="lp*", NAME="%k", GROUP="lp"
# tape devices
KERNEL="ht*", NAME="%k"
KERNEL="nht*", NAME="%k"
KERNEL="pt*", NAME="%k"
KERNEL="npt*", NAME="%k"
KERNEL="st*", NAME="%k"
KERNEL="nst*", NAME="%k"
KERNEL="osst*", NAME="%k"
KERNEL="nosst*", NAME="%k"
# diskonkey devices
KERNEL="diskonkey*", NAME="%k", GROUP="disk"
# rem_ide devices
KERNEL="microdrive*", NAME="%k", GROUP="disk"
# kbd devices
KERNEL="kbd", NAME="%k", MODE="0664"
# Sony Vaio Jogdial sonypi device
KERNEL="sonypi", NAME="%k", MODE="0666"
# packet devices
KERNEL="pktcdvd", NAME="pktcdvd/control", GROUP="cdrom", MODE="0660"
KERNEL="pktcdvd[0-9]*", NAME="pktcdvd/pktcdvd%n", GROUP="cdrom", MODE="0660"
# infiniband devices
KERNEL="umad*", NAME="infiniband/%k"
KERNEL="issm*", NAME="infiniband/%k"
## These lines are causing race conditions with the symlink to udevstart in
## /etc/hotplug.d/default/, so they are being commented out for now. Udev
## seems to work better that way... YMMV.
#
## be backward compatible for a while with the /etc/dev.d and /etc/hotplug.d/.
## systems run /etc/hotplug.d/ stuff only if we came from a hotplug event,
## not for udevstart
ENV{UDEVD_EVENT}=="1", RUN+="/sbin/udev_run_hotplugd"
#
## always run /etc/dev.d/ stuff for now
RUN+="/sbin/udev_run_devd"
# Firmware Helper - This is a requirement for loading firmware
ACTION=="add", SUBSYSTEM=="firmware", RUN+="/sbin/firmware_helper"
Ciao
ok per favore ora posta anche il contenuto del file /etc/udev/scripts/dvb.sh
e soprattutto accertati che udev sia attivo:
e soprattutto accertati che udev sia attivo:
Codice: Seleziona tutto
ps -e | grep udevIl file dvb.sh non esiste e dando il comando suggerito mi da il seguentewhites11 ha scritto:ok per favore ora posta anche il contenuto del file /etc/udev/scripts/dvb.sh
e soprattutto accertati che udev sia attivo:Codice: Seleziona tutto
ps -e | grep udev
root@Miguel:/home/miguel# ps -e | grep udev
1015 ? 00:00:00 udevd
ok allora il problema sta proprio qua!py67 ha scritto: Il file dvb.sh non esiste e dando il comando suggerito mi da il seguente
modifica la riga
con# dvb devices
KERNEL="dvb*", PROGRAM="/etc/udev/scripts/dvb.sh %k", NAME="%c", GROUP="video", MODE="0660"
riavvia la macchina (per sicurezza) e dovrebbe funzionare tutto! (spero)# dvb devices
KERNEL="dvb*", NAME="dvb/dvb%n", GROUP="video", MODE="0660"
ps fai un backup del file prima di modificarlo
whites11 ha scritto:ok allora il problema sta proprio qua!py67 ha scritto: Il file dvb.sh non esiste e dando il comando suggerito mi da il seguente
modifica la rigacon# dvb devices
KERNEL="dvb*", PROGRAM="/etc/udev/scripts/dvb.sh %k", NAME="%c", GROUP="video", MODE="0660"riavvia la macchina (per sicurezza) e dovrebbe funzionare tutto! (spero)# dvb devices
KERNEL="dvb*", NAME="dvb/dvb%n", GROUP="video", MODE="0660"
ps fai un backup del file prima di modificarlo
Fatto ma la direttori /dev/dvb regolarmente scompare ad ogni riavvio