DRI su via s3 unichrome pro

[sya54M]

salve è da un po' di mesi che sto sopportando la situazione di non poter sfruttare l'accelerazione 3d, ho visto che avviando alcune distribuzioni live funziona e sulla mia slackware installata no. vi posto il file di log di Xorg

---------
X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: Slackware 12.0 Slackware Linux Project
Current Operating System: Linux k8m800 2.6.21.5-AP #1 Wed Jun 13 08:55:05 CEST 2007 i686
Build Date: 09 May 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jul 10 19:03:50 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout"
(**) |-->Screen "Screen 0" (0)
(**) | |-->Monitor "LCD"
(**) | |-->Device "Unichrome0"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/OTF/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/Speedo/,
/usr/share/fonts/75dpi/:unscaled,
/usr/share/fonts/100dpi/:unscaled,
/usr/share/fonts/75dpi/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/cyrillic/
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Option "AllowMouseOpenFail"
(**) Option "OffTime" "4"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81dcd60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.2
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.2
(++) using VT number 7

(II) LoadModule: "i2c"(II) Module already built-in
(II) LoadModule: "ddc"(II) Module already built-in
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DEC-XTRAP
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.3.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "via"
(II) Loading /usr/lib/xorg/modules/drivers//via_drv.so
(II) Module via: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 0.2.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.2.99.905, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) VIA: driver for VIA chipsets: CLE266, KM400/KN400, K8M800,
PM800/PM880/CN400, VM800/CN700/P4M800Pro
(II) Primary Device is: PCI 01:00:0
(--) Chipset K8M800 found
(!!) VIA Technologies does not support or endorse this driver in any way.
(!!) For support, please refer to http://www.openchrome.org/ or
(!!) your X vendor.
(!!) (development build, at svn revision 357)
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
[4] -1 0 0xf0000100 - 0xf00001ff (0x100) MX
[5] -1 0 0xf0000000 - 0xf00000ff (0x100) MX
[6] -1 0 0xb0000000 - 0xafffffff (0x0) MXO
[7] -1 0 0xe1000000 - 0xe1ffffff (0x1000000) MX(B)
[8] -1 0 0xa4000000 - 0xa7ffffff (0x4000000) MX(B)
[9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
[10] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[11] -1 0 0x0000e200 - 0x0000e2ff (0x100) IX[B]
[12] -1 0 0x0000e100 - 0x0000e1ff (0x100) IX[B]
[13] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[14] -1 0 0x00001100 - 0x0000110f (0x10) IX[B]
[15] -1 0 0x00001700 - 0x0000171f (0x20) IX[B]
[16] -1 0 0x00001300 - 0x0000131f (0x20) IX[B]
[17] -1 0 0x00001200 - 0x0000121f (0x20) IX[B]
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xf0000100 - 0xf00001ff (0x100) MX[B]
[5] -1 0 0xf0000000 - 0xf00000ff (0x100) MX[B]
[6] -1 0 0xb0000000 - 0xafffffff (0x0) MX[B]O
[7] -1 0 0xe1000000 - 0xe1ffffff (0x1000000) MX[B](B)
[8] -1 0 0xa4000000 - 0xa7ffffff (0x4000000) MX[B](B)
[9] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[10] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[11] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x0000e200 - 0x0000e2ff (0x100) IX[B]
[15] -1 0 0x0000e100 - 0x0000e1ff (0x100) IX[B]
[16] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[17] -1 0 0x00001100 - 0x0000110f (0x10) IX[B]
[18] -1 0 0x00001700 - 0x0000171f (0x20) IX[B]
[19] -1 0 0x00001300 - 0x0000131f (0x20) IX[B]
[20] -1 0 0x00001200 - 0x0000121f (0x20) IX[B]
[21] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[22] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) VIA(0): VIAPreInit
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.2
(II) VIA(0): VIAGetRec
(**) VIA(0): Depth 24, (--) framebuffer bpp 32
(==) VIA(0): RGB weight 888
(==) VIA(0): Default visual is TrueColor
(--) VIA(0): Chipset: "K8M800"
(--) VIA(0): Chipset revision: 0
(II) VIA(0): Setting up default chipset options...
(II) VIA(0): VIASetupDefaultOptions
(**) VIA(0): Option "accel"
(**) VIA(0): Option "DisableIRQ"
(**) VIA(0): Option "EnableAGPDMA"
(II) VIA(0): Starting to parse config file options...
(--) VIA(0): VideoRAM is set to 0 kB
(==) VIA(0): ShadowFB is disabled.
(**) VIA(0): Acceleration is enabled.
(==) VIA(0): Using XAA acceleration architecture.
(==) VIA(0): Hardware two-color cursors; software full-color cursors.
(==) VIA(0): GPU virtual command queue will be enabled.
(**) VIA(0): DRI IRQ will be disabled if DRI is enabled.
(**) VIA(0): AGP DMA will be enabled if DRI is enabled.
(==) VIA(0): AGP DMA will be used for 2D acceleration.
(==) VIA(0): PCI DMA will be used for XV image transfer if DRI is enabled.
(==) VIA(0): Will not enable VBE modes.
(==) VIA(0): VBE VGA register save & restore will not be used
if VBE modes are enabled.
(==) VIA(0): Xv Bandwidth check is enabled.
(==) VIA(0): Will not impose a limit on video RAM reserved for DRI.
(==) VIA(0): Will try to allocate 32768 kB of AGP memory.
(==) VIA(0): Digital output bus width is 12 bits.
(==) VIA(0): DVI Center is disabled.
(==) VIA(0): Panel size is not selected from config file.
(==) VIA(0): Panel will not be forced.
(==) VIA(0): TV dotCrawl is disabled.
(==) VIA(0): TV deflicker is set to 0.
(==) VIA(0): No default TV type is set.
(==) VIA(0): No default TV output signal type is set.
(II) VIA(0): VIAMapMMIO
(--) VIA(0): mapping MMIO @ 0xe1000000 with size 0x9000
(--) VIA(0): mapping BitBlt MMIO @ 0xe1200000 with size 0x10000
(II) VIA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) VIA(0): Will not print VGA registers.
(==) VIA(0): Will not scan I2C buses.
(II) VIA(0): ...Finished parsing config file options.
(--) VIA(0): Detected Mitac 8889.
(II) VIA(0): Detected MemClk 5
(II) VIA(0): ViaGetMemoryBandwidth
(II) VIA(0): Detected TV standard: PAL.
(==) VIA(0): Using gamma correction (1.0, 1.0, 1.0)
(--) VIA(0): Probed VideoRAM = 65536 kB
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module already built-in
(II) VIA(0): ViaI2CInit
(II) VIA(0): ViaI2CBus1Init
(II) VIA(0): I2C bus "I2C bus 1" initialized.
(II) VIA(0): ViaI2cBus2Init
(II) VIA(0): I2C bus "I2C bus 2" initialized.
(II) VIA(0): ViaI2CBus3Init
(II) VIA(0): I2C bus "I2C bus 3" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module already built-in
(II) VIA(0): I2C device "I2C bus 1:ddc2" registered at address 0xA0.
(II) VIA(0): I2C device "I2C bus 1:ddc2" removed.
(II) VIA(0): ViaOutputsDetect
(II) VIA(0): Enabling panel from PCI-Subsystem Id information.
(II) VIA(0): VIATVDetect
(II) VIA(0): ViaVT162xDetect
(II) VIA(0): I2C device "I2C bus 3:VT162x" registered at address 0x40.
(--) VIA(0): Detected VIA Technologies VT1622A/VT1623 TV Encoder
(II) VIA(0): ViaTVInit
(II) VIA(0): ViaVT162xInit
(II) VIA(0): VT162xSave
(II) VIA(0): VT1622DACSense
(--) VIA(0): VT162x: Nothing connected.
(II) VIA(0): ViaOutputsSelect
(II) VIA(0): ViaOutputsSelect: X Configuration: 0x00
(II) VIA(0): ViaOutputsSelect: BIOS Initialised register: 0x07
(II) VIA(0): ViaOutputsSelect: Panel.
(WW) VIA(0): Panel on K8M800, PM800 or VM800 is currently not supported.
(WW) VIA(0): Using VBE to set modes to work around this.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/lib/xorg/modules//libvbe.so
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) VIA(0): initializing int10
(II) VIA(0): Primary V_BIOS segment is: 0xc000
(II) VIA(0): VESA BIOS detected
(II) VIA(0): VESA VBE Version 3.0
(II) VIA(0): VESA VBE Total Mem: 65536 kB
(II) VIA(0): VESA VBE OEM: VIA K8N800

(II) VIA(0): VESA VBE OEM Software Rev: 1.0
(II) VIA(0): VESA VBE OEM Vendor:
(II) VIA(0): VESA VBE OEM Product:
(II) VIA(0): VESA VBE OEM Product Rev:
(II) VIA(0): Searching for matching VESA mode(s):

(II) VIA(0): LCD: Using hsync range of 45.75-51.90 kHz
(II) VIA(0): LCD: Using vrefresh range of 57.50-65.00 Hz
(II) VIA(0): Not using mode "800x600" (no mode of this name)
(II) VIA(0): Not using mode "640x480" (no mode of this name)
(II) VIA(0): Not using built-in mode "1280x768" (width too large for virtual size)
(II) VIA(0): Attempting to use 60Hz refresh for mode "1024x768" (118)
(II) VIA(0): Attempting to use 60Hz refresh for mode "1280x768" (17b)
(--) VIA(0): Virtual size is 1024x768 (pitch 1024)
(**) VIA(0): *Built-in mode "1024x768": 0.0 MHz, 48363.6 kHz, 60.5 Hz
(II) VIA(0): Modeline "1024x768" 0.00 1024 0 0 0 768 0 0 0
(**) VIA(0): Display dimensions: (270, 203) mm
(**) VIA(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module already built-in
(II) VIA(0): VIAUnmapMem
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe1000000 - 0xe1ffffff (0x1000000) MS[B]
[1] 0 0 0xa4000000 - 0xa7ffffff (0x4000000) MS[B]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0 0xf0000100 - 0xf00001ff (0x100) MX[B]
[7] -1 0 0xf0000000 - 0xf00000ff (0x100) MX[B]
[8] -1 0 0xb0000000 - 0xafffffff (0x0) MX[B]O
[9] -1 0 0xe1000000 - 0xe1ffffff (0x1000000) MX[B](B)
[10] -1 0 0xa4000000 - 0xa7ffffff (0x4000000) MX[B](B)
[11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x0000e200 - 0x0000e2ff (0x100) IX[B]
[17] -1 0 0x0000e100 - 0x0000e1ff (0x100) IX[B]
[18] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[19] -1 0 0x00001100 - 0x0000110f (0x10) IX[B]
[20] -1 0 0x00001700 - 0x0000171f (0x20) IX[B]
[21] -1 0 0x00001300 - 0x0000131f (0x20) IX[B]
[22] -1 0 0x00001200 - 0x0000121f (0x20) IX[B]
[23] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[24] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) VIA(0): VIAScreenInit
(II) VIA(0): VIAMapFB
(--) VIA(0): mapping framebuffer @ 0xa4000000 with size 0x4000000
(==) VIA(0): Write-combining range (0xa4000000,0x4000000)
(--) VIA(0): Frame buffer start: 0xb39be000, free start: 0x300000 end: 0x4000000
(II) VIA(0): VIAMapMMIO
(--) VIA(0): mapping MMIO @ 0xe1000000 with size 0x9000
(--) VIA(0): mapping BitBlt MMIO @ 0xe1200000 with size 0x10000
(II) VIA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) VIA(0): VIASave
(II) VIA(0): Primary
(II) VIA(0): TVSave...
(II) VIA(0): VT162xSave
(II) VIA(0): Trying VBE Mode 1024x768 (0xc118) Refresh 60.00:
(II) VIA(0): ViaVbeSetRefresh
(II) VIA(0): Active Device: 2
(II) VIA(0): Refresh Rate Index: 0
(II) VIA(0): VBESetVBEMode failed...but worked OK without customized refresh and dotclock.
(II) VIA(0): VIAAdjustFrame
(II) VIA(0): - Blanked
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:00:00.7
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) VIA(0): [drm] DRM interface version 1.3
(II) VIA(0): [drm] created "via" driver at busid "PCI:1:0:0"
(II) VIA(0): [drm] added 8192 byte SAREA at 0xdcdf7000
(II) VIA(0): [drm] mapped SAREA 0xdcdf7000 to 0xb39ac000
(II) VIA(0): [drm] framebuffer handle = 0xa4000000
(II) VIA(0): [drm] added 1 reserved context for kernel
(II) VIA(0): [dri] visual configs initialized.
(II) VIA(0): [drm] register handle = 0xe1000000
(II) VIA(0): [drm] framebuffer handle = 0xa4000000
(II) VIA(0): [drm] mmio Registers = 0xe1000000
(II) VIA(0): [dri] mmio mapped.
(II) VIA(0): - Visuals set up
(II) VIA(0): VIAInternalScreenInit
(II) VIA(0): - B & W
(II) VIA(0): Using 2304 lines for offscreen memory.
(II) VIA(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
8x8 color pattern filled rectangles
Solid Lines
Dashed Lines
Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
31 128x128 slots
12 256x256 slots
4 512x512 slots
32 8x8 color pattern slots
(==) VIA(0): Backing store disabled
(II) VIA(0): - Backing store set up
(II) VIA(0): - SW cursor set up
(II) VIA(0): VIAHWCursorInit
(II) VIA(0): - Def Color map set up
(II) VIA(0): VIALoadPalette
(II) VIA(0): VIALoadRgbLut
(II) VIA(0): - Palette loaded
(**) Option "dpms"
(**) VIA(0): DPMS enabled
(II) VIA(0): - DPMS set up
(II) VIA(0): - Color maps etc. set up
(II) VIA(0): [drm] Detected AGP vendor 0x1106, device 0x04204
(II) VIA(0): [drm] Found AGP v3 compatible device. Trying AGP 8X mode.
(II) VIA(0): [drm] Trying to enable AGP fast writes.
(II) VIA(0): [drm] drmAgpEnabled succeeded
(II) VIA(0): [drm] agpAddr = 0xb0000000
(II) VIA(0): [drm] agpBase = (nil)
(II) VIA(0): [drm] agpAddr = 0xb0000000
(II) VIA(0): [drm] agpSize = 0x01e00000
(II) VIA(0): [drm] agp physical addr = 0x00000000
(II) VIA(0): [dri] use agp.
(II) VIA(0): [drm] Using 54251488 bytes for DRM memory heap.
(II) VIA(0): [dri] frame buffer initialized.
(II) VIA(0): X context handle = 0x1
(II) VIA(0): [drm] installed DRM signal handler
(II) VIA(0): [DRI] installation complete
(II) VIA(0): [dri] kernel data initialized.
(II) VIA(0): [drm] Initialized AGP ring-buffer, size 0x200000 at AGP offset 0x1e00000.
(II) VIA(0): direct rendering enabled
(II) VIA(0): [Xv] Using PCI DMA for Xv image transfer.
Fulfilled via DRI at 12587008
(II) VIA(0): Benchmarking video copy. Less is better.
(--) VIA(0): Timed libc YUV420 copy... 7519750. Throughput: 63.1 MiB/s.
(--) VIA(0): Timed kernel YUV420 copy... 7519519. Throughput: 63.1 MiB/s.
(--) VIA(0): Timed SSE YUV420 copy... 7487705. Throughput: 63.4 MiB/s.
(--) VIA(0): Timed MMX YUV420 copy... 7487410. Throughput: 63.4 MiB/s.
(--) VIA(0): Timed 3DNow! YUV420 copy... 7490310. Throughput: 63.4 MiB/s.
(--) VIA(0): Timed MMX2 YUV420 copy... 7488263. Throughput: 63.4 MiB/s.
Freed 12587008 (pool 2)
(--) VIA(0): Using MMX YUV42X copy for video.
(II) VIA(0): [XvMC] Registering viaXvMC.
(II) VIA(0): [XvMC] Initialized XvMC extension.
(II) VIA(0): - Done
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:00.7
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(WW) AIGLX: 3D driver claims to not support visual 0x22
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/unichrome_dri.so
(II) GLX: Initialized DRI GL provider for screen 0

------
ecco questo è quasi tutto il file Xorg.0.log, io vedo che dri viene corretamente caricato ma in realta non funziona e se provo ad avviare xdriinfo mi da segmentation fault.
io non mi so spiegare questa situazione, se qualcuno ha un idea di cosa può essere gli sarei molto grato.
non ne posso più di non utilizzare l'accelerazione 3d
ciao e grazie

[Bart]

Ciao, che scheda video hai? Usi driver esterni?

[ekxius]

usi fglrx o i driver open? posta il contenuto di xorg.conf perchè dal log sempra che sia tutto a posto...

[sya54M]

ciao, la scheda video è una scheda integrata nella scheda madre del portatile della VIA con GPU S3 Unichrome Pro, e come si vede anche dal log uso il driver openchrome gia incluso in Xorg.
Nel file xorg.conf ho settato come driver "via", ho disattivato l'irq della scheda video, e attivato la dma dell'agp.
vi ho scritto le cose più importanti del file xorg.conf invece di postarlo perchè ora non sto usando il mio sistema.

vi ringrazio e saluto, ciao!

[Bart]

Prova con i vesa come driver.

[sya54M]

ma come io voglio attivare l'accelerazione 3d, e addirittura mi dici di peggiorarne le prestazioni anche nel 2d coi driver vesa?

[Bart]

ma come io voglio attivare l'accelerazione 3d, e addirittura mi dici di peggiorarne le prestazioni anche nel 2d coi driver vesa?

Tempo fa con un vecchio portatile che montava una S3 avevo ottime prestazioni con quei driver. Al tempo avevo provato anche questi driver: http://www.probo.com/timr/savage40.html#download che con la mia scheda funzionavano.

[sya54M]

però io ho gia provato il driver vesa in quanto è quello predefinito di xorg.conf ma con pessime prestazioni e naturalmente non potrà supportare l'accelerazione 3d che a me interessa e che su altre distro funziona con lo stesso driver via che uso io.
per il driver savage invece, non va bene per la mia scheda che è una s3 unichrome e non una s3 savage

ciao

[sya54M]

la questione su qui insisto io, invece, è la fallita esecuzione di xdriinfo perchè il driver che utilizzo è quello giusto, è lo stesso utilizzato nelle distro live in qui funziona

[phobos3576]

Strano! La Slackware supporta già (dalla versione 11) le S3 Unichrome Pro, per cui non è necessaria l'installazione del driver
( http://wiki.openchrome.org/tikiwiki/tik ... y+packages )

Tutto ciò che bisogna fare è modificare opportunamente xorg.conf; in particolare, la Section "Device" dovrebbe avere questo aspetto:

Codice: Seleziona tutto

Section "Device"
        Identifier      "Generic Video Card"
        Driver          "via"
        Option          "EnableAGPDMA" "On"
EndSection

Credo sia importante quell'opzione "EnableAGPDMA" ma, probabilmente, tu hai già impostato tutto correttamente; per cui ... boh ...

P.S. Se stai usando Slackware 11, ricordati che Pat aveva rilasciato degli aggiornamenti per Xorg; li puoi trovare qui: ftp://ftp.slackware.com/pub/slackware/s ... s/packages

(scarica tutti i pacchetti che iniziano per x11).

Con la Slackware 12 non ci dovrebbero essere problemi.

[sya54M]

ciao, la mia installazione iniziale, a dire la verità era una 10.1, poi lho aggiornata con slapt-get alla 11 e ora di nuovo alla 12 sempre con slapt-get.
credo che così facendo si sia un po' zozzato il sistema anche se i file nella dir /etc li ho sistemati a mano cancellando quelli vecchi e rinonimando i .new.
comunque si, nel file xorg.conf ho gia attivato la dma dell'agp.
che problemi si possono avere nell'aggiornare il sistema come ho fatto io dalla 10.2 alla 11 alla 12 ??

[phobos3576]

Gli aggiornamenti così drastici creano sempre dei problemi, a meno di non essere dei veri esperti di Linux; nella Slacware 12 poi, in relazione a Xorg e a KDE, sono cambiati tutti i percorsi di installazione. Il rischio quindi è quello di rotrovarsi con un miscuglio di packages vecchi e nuovi.

P.S. Aggiornamenti con Slapt-get? Un suicidio!

[sya54M]

ciao, quando ho installato gli aggiornamenti alla 12, ho disinstallato xorg e kde e cancellato le directory relative rimaste /opt/kde e /usr/X11R6 ed ho reinstallato quelli nuovi con i nuovi percorsi, poi ho creato dei collegamenti simbolici al posto dei vecchi percorsi per mantenere la compatibilità con i vecchi programmi che avevo installato. per funzionare funziona, infatti l'accelerazione 3d non mi funziona più gia da prima di aggiornare alla 12