Ti posto solo l'intero contenuto di downloads.ini anche perchè ho ri-eliminato la directory /home/nouser/.mldonkey e ripristinato solo il file users.ini e comunque il core parte senza problemi per cui il problema è in questo file ma non so dove
Codice: Seleziona tutto
(************************************)
(* Never edit options files when *)
(* the daemon is running *)
(************************************)
(* SECTION : Main *)
(* Main options *)
(************************************)
(* small name of client *)
client_name = KANDLER
(************************************)
(* SECTION : Interfaces *)
(* Options to control ports used by mldonkey interfaces *)
(************************************)
(* list of IP address allowed to connect to the core via telnet/GUI/WEB
for internal command set: list separated by spaces
example for internal command: set allowed_ips "127.0.0.0/8 192.168.1.2"
or for editing the ini-file: list separated by semi-colon
example for ini-file: allowed_ips = [ "127.0.0.0/8"; "192.168.1.2";]
CIDR and range notations are supported: ie use 192.168.0.0/24
or 192.168.0.0-192.168.0.255 for 192.168.0.* *)
allowed_ips = [
"192.168.0.0/24";"87.25.32.137";]
(* port for Graphical Interfaces, 0 to deactivate GUI interface *)
(* changing this option requires restart of MLDonkey core *)
gui_port = 4001
(* port for GiFT Graphical Interfaces interaction. It was 1213, but the default is
now 0 for disabled, because it does not check for a password. *)
(* changing this option requires restart of MLDonkey core *)
gift_port = 0
(* The port used to connect to your client with a web browser, 0 to deactivate web interface *)
(* changing this option requires restart of MLDonkey core *)
http_port = 4080
(* port for user interaction, 0 to deactivate telnet interface *)
(* changing this option requires restart of MLDonkey core *)
telnet_port = 4000
(* Aliases to commands. The alias (fist string) has to be
whitespaceless, the outcome of the alias (second string)
may have spaces (put it in quotation then). *)
alias_commands = [
(quit, q);
(exit, q);]
(************************************)
(* SECTION : Bandwidth *)
(* Bandwidth options *)
(************************************)
(* The maximal upload rate you can tolerate on your link in kBytes/s (0 = no limit)
The limit will apply on all your connections (clients and servers) and both
control and data messages. *)
max_hard_upload_rate = 20
(* The maximal download rate you can tolerate on your link in kBytes/s (0 = no limit)
The limit will apply on all your connections (clients and servers) and both
control and data messages. Maximum value depends on max_hard_upload_rate:
>= 10 -> unlimited download
< 10 > 3 -> download limited to upload * 4
< 4 -> download limited to upload * 3 *)
max_hard_download_rate = 150
(* Second maximal upload rate for easy toggling (use bw_toggle) *)
max_hard_upload_rate_2 = 5
(* Second maximal download rate for easy toggling (use bw_toggle) *)
max_hard_download_rate_2 = 20
(* Maximal number of opened connections *)
max_opened_connections = 200
(* Second maximal number of opened connections for easy toggling (use bw_toggle) *)
max_opened_connections_2 = 100
(* Amount of indirect connections in percent (min 30, max 70) of max_opened_connections *)
max_indirect_connections = 30
(* How many slots can be used for upload *)
max_upload_slots = 5
(* How many percent of upload slots can be used for downloading files
tagged as release, maximum 75% *)
max_release_slots = 20
(* Set aside a single reserved slot to upload to friends *)
friends_upload_slot = true
(* Maximum file size to benefit from the reserved slot for small files (0 to disable) *)
small_files_slot_limit = 10240
(* Set this to true if you want to have dynamic upload slot allocation (experimental) *)
dynamic_slots = false
(* Maximal number of connections that can be opened per second *)
max_connections_per_second = 5
(* list of IP addresses allowed to connect to the core with no limit on
upload/download and upload slots. List separated by spaces, wildcard=255
ie: use 192.168.0.255 for 192.168.0.* *)
nolimit_ips = [
"127.0.0.1";]
(* This option enables MLdonkey to always read as much data as possible
from a channel, but use more CPU as it must then copy the data in the
channel buffer. *)
copy_read_buffer = true
(************************************)
(* SECTION : Networks *)
(* Networks options *)
(************************************)
(* Set to true if you also want mldonkey to run as an overnet client
(enable_donkey must be true) *)
enable_overnet = true
(* Set to true if you also want mldonkey to run as an kademlia client
(enable_donkey must be true, and only experimental) *)
enable_kademlia = true
(* Set to true if you want mldonkey to connect to edonkey servers
(enable_donkey must be true, and only experimental) *)
enable_servers = true
(* Set to true if you also want mldonkey to run as an Bittorrent client *)
enable_bittorrent = true
(* Set to true if you also want mldonkey to run as a donkey client *)
enable_donkey = true
(* Set to true if you also want mldonkey to run as a napster client (experimental) *)
enable_opennap = true
(* Set to true if you also want mldonkey to run as a soulseek client (experimental) *)
enable_soulseek = true
(* Set to true if you also want mldonkey to run as a gnutella1 sub node (experimental) *)
enable_gnutella = true
(* Set to true if you also want mldonkey to run as a gnutella2 sub node (experimental) *)
enable_gnutella2 = true
(* Set to true if you also want mldonkey to run as a Fasttrack sub node (experimental) *)
enable_fasttrack = true
(* Set to true if you also want mldonkey to run as a direct-connect node (experimental) *)
enable_directconnect = true
(* Set to true if you also want mldonkey to download HTTP files (experimental) *)
enable_fileTP = true
(************************************)
(* SECTION : Network Config *)
(* Network config options *)
(************************************)
(* The last IP address used for this client *)
client_ip = "82.58.194.243"
(* Use the IP specified by 'client_ip' instead of trying to determine it
ourself. Don't set this option to true if you have dynamic IP. *)
force_client_ip = false
(* Use http://ip.discoveryvip.com/ip.asp to obtain WAN IP *)
discover_ip = true
(* User agent string (default = "default") *)
user_agent = default
(* A list of lines to download on the WEB: each line has
the format: (kind, period, url), where kind is either
'server.met' for a server.met file (also in gz/bz2/zip format)
containing ed2k server, or
'comments.met' for a file of comments, or
'guarding.p2p' for a blocklist file (also in gz/bz2/zip format), or
'ocl' for file in the ocl format containing overnet peers, or
'contact.dat' for an contact.dat file containing overnet peers,
'nodes.gzip' for a fasttrack nodes.gzip,
and period is the period between updates (in hours),
a period of zero means the file is only loaded once on startup,
and url is the url of the file to download.
IMPORTANT: Put the URL and the kind between quotes.
EXAMPLE:
web_infos = [
("server.met", 0, "http://www.gruk.org/server.met.gz");
("hublist", 0, "http://dchublist.com/hublist.config.bz2");
("guarding.p2p", 96, "http://www.bluetack.co.uk/config/level1.gz");
("ocl", 24, "http://members.lycos.co.uk/appbyhp2/FlockHelpApp/contact-files/contact.ocl");
("contact.dat", 168, "http://download.overnet.org/contact.dat");
("geoip.dat", 168, "http://www.maxmind.com/download/geoip/database/GeoIP.dat.gz");
]
*)
web_infos = [
("geoip.dat", 0, "http://www.maxmind.com/download/geoip/database/GeoIP.dat.gz");
("contact.dat", 168, "http://download.overnet.org/contact.dat");
("server.met", 0, "http://www.gruk.org/server.met.gz");
("guarding.p2p", 96, "http://www.bluetack.co.uk/config/level1.gz");
(hublist, 0, "http://dchublist.com/hublist.config.bz2");
("nodes.gzip", 0, "http://update.kceasy.com/update/fasttrack/nodes.gzip");]
(* Cookies send with a http request (used for .torrent files and web_infos) *)
referers = [
(".*suprnova.*", "http://www.suprnova.org/");]
(* Cookies send with a http request (used for .torrent files and web_infos) *)
cookies = []
(* Direct HTTP queries to HTTP proxy *)
http_proxy_server = ""
(* Port of HTTP proxy *)
http_proxy_port = 8080
(* Direct TCP connections to HTTP proxy (the proxy should support CONNECT) *)
http_proxy_tcp = false
(************************************)
(* SECTION : HTML mods *)
(* Options to configure HTML mode *)
(************************************)
(* bw_stats refresh delay (seconds) *)
html_mods_bw_refresh_delay = 11
(* html_mods_theme to use (located in relative html_themes/<theme_name> directory
leave blank to use internal theme *)
html_mods_theme = ""
(************************************)
(* SECTION : Download *)
(* Download options *)
(************************************)
(* Set to false if you don't want mldonkey to automatically put completed files
in incoming directory *)
auto_commit = true
(* Set to true if you want all new downloads be paused immediatly
will be set to false on core start. *)
pause_new_downloads = false
(* Set to true if you want to activate the release slot feature for all new downloads. *)
release_new_downloads = false
(* The maximal number of files in Downloading state (other ones are Queued) *)
max_concurrent_downloads = 50
(* The maximal length of zero bytes between non-zero bytes in a file that
should be interpreted as downloaded during a recovery *)
max_recover_zeroes_gap = 16
(* A command that is called when a file is committed, does not work on MinGW.
Arguments are (kept for compatability):
$1 - temp file name, without path
$2 - file size
$3 - filename of the committed file
Also these environment variables can be used (prefered way):
$TEMPNAME - temp file name, including path
$FILEID - same as $1
$FILESIZE - same as $2
$FILENAME - same as $3
$FILEHASH - internal hash
$DURATION - download duration
$INCOMING - directory used for commit
$NETWORK - network used for downloading
$ED2K_HASH - ed2k hash if MD4 is known
$FILE_OWNER - user who started the download
$FILE_GROUP - group the file belongs to
$USER_MAIL - mail address of file_owner
*)
file_completed_cmd = ""
(* The command which is called when a download is started. Arguments
are '-file <num>'
Also these environment variables can be used (prefered way):
$TEMPNAME - temp file name, including path
$FILEID - same as $1
$FILESIZE - same as $2
$FILENAME - same as $3
$FILEHASH - internal hash
$NETWORK - network used for downloading
$ED2K_HASH - ed2k hash if MD4 is known
$FILE_OWNER - user who started the download
$FILE_GROUP - group the file belongs to
$USER_MAIL - mail address of file_owner
*)
file_started_cmd = ""
(************************************)
(* SECTION : Startup *)
(* Startup options *)
(************************************)
(* The login of the user you want mldonkey to run as, after the ports
have been bound (can be used not to run with root privileges when
a port < 1024 is needed) *)
(* changing this option requires restart of MLDonkey core *)
run_as_user = ""
(* The UID of the user (0=disabled) you want mldonkey to run as, after the ports
have been bound (can be used not to run with root privileges when
a port < 1024 is needed) *)
(* changing this option requires restart of MLDonkey core *)
run_as_useruid = 0
(* The group of run_as_user user to be used *)
(* changing this option requires restart of MLDonkey core *)
run_as_group = ""
(* The group of run_as_user user to be used *)
(* changing this option requires restart of MLDonkey core *)
run_as_groupgid = 0
(* Ask for GUI start *)
ask_for_gui = false
(* Automatically Start the GUI *)
start_gui = false
(* Should MLdonkey try to recover downloads of files in temp/ at startup *)
recover_temp_on_startup = true
(************************************)
(* SECTION : Mail *)
(* Mail options *)
(************************************)
(* The mail server you want to use (must be SMTP). Use hostname or IP address *)
smtp_server = "127.0.0.1"
(* The port to use on the mail server (default 25) *)
smtp_port = 25
(* Your e-mail if you want to receive mails when downloads are completed *)
mail = ""
(* Does your mail-server need <...> around addresses *)
add_mail_brackets = false
(* Send filename in mail subject *)
filename_in_subject = true
(* Put a prefix for the filename here which shows up in the notification mail *)
url_in_mail = ""
(************************************)
(* SECTION : Paths *)
(* Paths options *)
(************************************)
(* The directory where temporary files should be put *)
temp_directory = "/mnt/P2P/mldonkey/temp"
(* How often (in minutes) should MLDonkey scan all shared directories for new/removed files.
Minimum 5, 0 to disable. Use command reshare to manually scan shares.
When core starts, shared directories are scanned once, independent of this option. *)
(* changing this option requires restart of MLDonkey core *)
share_scan_interval = 30
(* New download files are created with these rights (in octal) *)
create_file_mode = 664
(* New directories in incoming_directories are created with these rights (in octal) *)
create_dir_mode = 755
(* Create new files as sparse, only valid on MinGW for files on NTFS drives *)
create_file_sparse = true
(* Mininum free space in MB on temp_directory, minimum 50 *)
hdd_temp_minfree = 50
(* If true core shuts down when free space on temp dir is below hdd_temp_minfree,
otherwise all downloads are paused and a warning email is sent. *)
hdd_temp_stop_core = false
(* Mininum free space in MB on core directory, minimum 20 *)
hdd_coredir_minfree = 50
(* If true core shuts down when free space on core dir is below hdd_coredir_minfree,
otherwise all downloads are paused and a warning email is sent. *)
hdd_coredir_stop_core = true
(* Send a warning mail each <interval> hours for each directory, 0 to deactivate mail warnings. *)
hdd_send_warning_interval = 1
(* Incoming and shared directories.
At least two entries have to be present here, one with strategy
incoming_files and one with strategy incoming_directories.
Both entries can point to the same directory.
If one of the two strategies is missing, MLDonkey will create a default
directory with its entry here.
Finished BT multifile downloads are committed to the first directory
with strategy incoming_directories. Other downloads are committed
to the first directory with the strategy incoming_files.
MLdonkey searches all shared_directories with incoming_* strategies
on commit and uses the first one with enough free diskspace.
Other strategies can be found in searches.ini, section customized_sharing. *)
shared_directories = [
{ dirname = shared
strategy = all_files
priority = 0
};
{ dirname = "/mnt/P2P/mldonkey/incoming/files"
strategy = incoming_files
priority = 0
};
{ dirname = "/mnt/P2P/mldonkey/incoming/directories"
strategy = incoming_directories
priority = 0
};]
(************************************)
(* SECTION : Security *)
(* Security options *)
(************************************)
(* Commands that you are allowed to be call from the interface. These
commands should short, so that the core is not blocked more than necessary. *)
allowed_commands = [
(df, df);
(ls, "ls incoming");]
(* Allow you to use any command with ! in the interface instead of only the
ones in allowed_commands *)
allow_any_command = false
(* Allow others to browse our share list (0: none, 1: friends only, 2: everyone *)
allow_browse_share = 1
(* Regexp of messages to filter out, example: string1|string2|string3 *)
messages_filter = "DI-Emule|ZamBoR|Ketamine|eMule FX|AUTOMATED MESSAGE|Hi Honey!|Do you live in my area|download HyperMule"
(* Regexp of comments to filter out, example: string1|string2|string3 *)
comments_filter = "http://|https://|www\\."
(************************************)
(* SECTION : Other *)
(* Other options *)
(************************************)
(* (experimental) *)
save_results = 0
(* Buffer writes and flush after buffer_writes_delay seconds (experimental) *)
buffer_writes = false
(* build statistics about eMule mods *)
emule_mods_count = false
(* show all eMule mods in statistics *)
emule_mods_showall = false
(* How often (in hours) should a backup of the ini files be written into old_config.
A value of zero means that a backup is written only when the core shuts down. *)
backup_options_delay = 0
(* Define the total number of options archives in old_config. *)
backup_options_generations = 10
(* Define the format of the archive, zip or tar.gz are valid. *)
backup_options_format = "tar.gz"
(* The maximum time in seconds to wait for networks to cleanly shutdown. *)
shutdown_timeout = 3
(* The IP address used to bind the p2p clients *)
(* changing this option requires restart of MLDonkey core *)
client_bind_addr = "0.0.0.0"
(*****************************************************************)
(* *)
(* ADVANCED OPTIONS *)
(* *)
(* All the options after this line are for the expert *)
(* user. Do not modify them if you are not sure. *)
(* *)
(*****************************************************************)
(************************************)
(* SECTION : Interfaces FOR EXPERTS *)
(* Options to control ports used by mldonkey interfaces *)
(************************************)
(* The IP address used to bind the http server *)
(* changing this option requires restart of MLDonkey core *)
http_bind_addr = "0.0.0.0"
(* The IP address used to bind the gui server *)
(* changing this option requires restart of MLDonkey core *)
gui_bind_addr = "0.0.0.0"
(* The IP address used to bind the telnet server *)
(* changing this option requires restart of MLDonkey core *)
telnet_bind_addr = "0.0.0.0"
(* Should *all* sources for a file be shown on HTML/telnet vd <num> *)
print_all_sources = true
(* Improved telnet interface *)
improved_telnet = true
(* A space-separated list of keywords. Each keyword triggers
printing information on the corresponding messages:
verb : verbose mode (interesting not only for coders)
mc : debug client messages
mr|raw : debug raw messages
mct : debug emule clients tags
ms : debug server messages
sm : debug source management
net : debug net
gui : debug gui
no-login : disable login messages
file : debug file handling
do : some download warnings
up : some upload warnings
unk : unknown messages
ov : overnet
loc : debug source research/master servers
share: debug sharing
md4 : md4 computation
connect : debug connections
udp : udp messages
ultra|super : debug supernode
swarming : debug swarming
hc : http_client messages
hs : http_server messages
com : commands by non-admin users
act : debug activity
bw : debug bandwidth
geo : debug GeoIP
unexp : debug unexpected messages *)
verbosity = ""
(************************************)
(* SECTION : Bandwidth FOR EXPERTS *)
(* Bandwidth options *)
(************************************)
(* The delay in milliseconds to wait in the event loop. Can be decreased to
increase the bandwidth usage, or increased to lower the CPU usage. *)
loop_delay = 5
(************************************)
(* SECTION : Networks FOR EXPERTS *)
(* Networks options *)
(************************************)
(* Set to true if you also want mldonkey to run as a OpenFT sub node (experimental) *)
enable_openft = true
(************************************)
(* SECTION : Network Config FOR EXPERTS *)
(* Network config options *)
(************************************)
(* URLs of RSS feeds *)
rss_feeds = []
(* If MLDonkey can not read broken RSS feeds, use this program to preprocess them *)
rss_preprocessor = xmllint
(* Keep IP blocking ranges descriptions in memory *)
ip_blocking_descriptions = false
(* IP blocking list filename (peerguardian format), can also be in gz/bz2/zip format
Zip files must contain either a file named guarding.p2p or guarding_full.p2p. *)
ip_blocking = ""
(* List of countries to block connections from/to (requires Geoip).
Names are in ISO 3166 format, see http://www.maxmind.com/app/iso3166
You can also at your own risk use "Unknown" for IPs Geoip won't recognize. *)
ip_blocking_countries = []
(* false: use ip_blocking_countries as block list, all other countries are allowed
true: use ip_blocking_countries as allow list, all other countries are blocked *)
ip_blocking_countries_block = false
(* Location of GeoIP.dat (Get one from http://www.maxmind.com/download/geoip/database/) *)
geoip_dat = ""
(* The size of the header of a TCP/IP packet on your connection (ppp adds
14 bytes sometimes, so modify to take that into account) *)
tcpip_packet_size = 40
(* The size of the MTU of a TCP/IP packet on your connection *)
mtu_packet_size = 1500
(* The size of the minimal packet you want mldonkey to send when data is
available on the connection *)
minimal_packet_size = 600
(* Should a connection check if the peer we are connected to is still alive?
This implies some bandwidth-cost (with 200 connections ~10-20%) *)
socket_keepalive = false
(************************************)
(* SECTION : HTML mods FOR EXPERTS *)
(* Options to configure HTML mode *)
(************************************)
(* Whether to use the modified WEB interface *)
html_mods = true
(* Which html_mods style to use (set with html_mods_style command) *)
html_mods_style = 0
(* Whether to use human readable GMk number format *)
html_mods_human_readable = true
(* Whether to use relative availability in the WEB interface *)
html_mods_use_relative_availability = true
(* Whether to display the Net column in vd output *)
html_mods_vd_network = true
(* Whether to display the Comments column in vd output *)
html_mods_vd_comments = true
(* Whether to display the User column in vd output *)
html_mods_vd_user = false
(* Whether to display the Group column in vd output *)
html_mods_vd_group = false
(* Whether to display the Active Sources column in vd output *)
html_mods_vd_active_sources = true
(* Whether to display the Age column in vd output *)
html_mods_vd_age = true
(* Whether to display flags instead of country codes *)
html_flags = true
(* Show graph in vd output *)
html_mods_vd_gfx = true
(* Remove graph files on core shutdown *)
html_mods_vd_gfx_remove = false
(* Fill graph in vd output *)
html_mods_vd_gfx_fill = true
(* Split download and upload graph in vd output *)
html_mods_vd_gfx_split = false
(* Stacked download and upload graph *)
html_mods_vd_gfx_stack = true
(* Flip up/side graph position in vd output *)
html_mods_vd_gfx_flip = true
(* Show mean line on graph in vd output *)
html_mods_vd_gfx_mean = true
(* Show transparent graph in vd output (only for png) *)
html_mods_vd_gfx_transparent = true
(* Draw graph as png if true, else draw as jpg in vd output *)
html_mods_vd_gfx_png = true
(* Show hourly graph in vd output *)
html_mods_vd_gfx_h = true
(* Graph x size in vd output ( 365 < x < 3665 ) *)
html_mods_vd_gfx_x_size = 795
(* Graph y size in vd output ( 200 < y < 1200 ) *)
html_mods_vd_gfx_y_size = 200
(* compute values for hourly graph every 1,2,3,4,5,10,15,20,30,60 min
Changes to this option require a core restart. *)
(* changing this option requires restart of MLDonkey core *)
html_mods_vd_gfx_h_intervall = 60
(* Dynamic grid width, start with 1 h/grid, maximum html_mods_vd_gfx_h_grid_time h/grid *)
html_mods_vd_gfx_h_dymamic = true
(* Max hours on time scale per grid (0 = no limit) *)
html_mods_vd_gfx_h_grid_time = 0
(* Number of shown subgrids on graph (0 = no subgrids) *)
html_mods_vd_gfx_subgrid = 0
(* Draw tag graph *)
html_mods_vd_gfx_tag = false
(* Use tag source image *)
html_mods_vd_gfx_tag_use_source = false
(* Tag source image name *)
html_mods_vd_gfx_tag_source = image
(* Draw tag as png if true, else draw as jpg in vd output *)
html_mods_vd_gfx_tag_png = true
(* Enable tag graph title *)
html_mods_vd_gfx_tag_enable_title = true
(* Tag graph title *)
html_mods_vd_gfx_tag_title = "MLNet traffic"
(* Tag graph title x pos in vd output *)
html_mods_vd_gfx_tag_title_x_pos = 4
(* Tag graph title y pos in vd output *)
html_mods_vd_gfx_tag_title_y_pos = 1
(* Tag graph download x pos in vd output *)
html_mods_vd_gfx_tag_dl_x_pos = 4
(* Tag graph download y pos in vd output *)
html_mods_vd_gfx_tag_dl_y_pos = 17
(* Tag graph upload x pos in vd output *)
html_mods_vd_gfx_tag_ul_x_pos = 4
(* Tag graph upload y pos in vd output *)
html_mods_vd_gfx_tag_ul_y_pos = 33
(* Tag graph x size in vd output ( 130 < x < 3600 ) *)
html_mods_vd_gfx_tag_x_size = 80
(* Tag graph y size in vd output ( 50 < x < 1200 ) *)
html_mods_vd_gfx_tag_y_size = 50
(* Whether to display the Last column in vd output *)
html_mods_vd_last = true
(* Whether to display the Priority column in vd output *)
html_mods_vd_prio = true
(* Change height of download indicator bar in vd output *)
html_vd_barheight = 2
(* Whether to display chunks list as graph or text in vd output *)
html_vd_chunk_graph = true
(* Change style of chunk graph *)
html_vd_chunk_graph_style = 0
(* Change max width of chunk graph *)
html_vd_chunk_graph_max_width = 200
(* Whether to display the pending slots in uploaders command *)
html_mods_show_pending = true
(* Whether to load the mldonkey_messages.ini file (false=use internal settings) *)
html_mods_load_message_file = false
(* Maximum chat messages to log in memory *)
html_mods_max_messages = 50
(* Whether to use checkboxes in the WEB interface for download list *)
html_checkbox_vd_file_list = true
(* Whether to use checkboxes in the WEB interface for search result list *)
html_checkbox_search_file_list = false
(* Use gzip compression on web pages *)
html_use_gzip = false
(* Whether to use the fancy javascript tooltips or plain html-title *)
html_mods_use_js_tooltips = true
(* How long to wait before displaying the tooltips *)
html_mods_js_tooltips_wait = 0
(* How long to display the tooltips *)
html_mods_js_tooltips_timeout = 100000
(* Use javascript to display option help text as js popup (true=use js, false=use html tables) *)
html_mods_use_js_helptext = true
(************************************)
(* SECTION : Debug FOR EXPERTS *)
(* Debug options *)
(************************************)
(* If this option is set, IP addresses on the local network are allowed
(only for debugging) *)
allow_local_network = false
(* size of log in number of records *)
log_size = 300
(* Maximum size of log_file in MB, this value is only checked on startup,
log_file will be deleted if its bigger than log_file_size. *)
log_file_size = 2
(* The file in which you want mldonkey to log its debug messages. If you
set this option, mldonkey will log this info in the file until you use the
'close_log' command. The log file may become very large. You can
also enable logging in a file after startup using the 'log_file' command. *)
log_file = "mlnet.log"
(* Post log messages to syslog. This setting is independent of log_file
and its associated commands, therefore close_log does not stop log to syslog.
Its therefore possible to log to syslog and log_file at the same time. *)
log_to_syslog = false
(* number of lines for GUI console messages *)
gui_log_size = 30
(************************************)
(* SECTION : Download FOR EXPERTS *)
(* Download options *)
(************************************)
(* How many sources to use to download each chunk *)
sources_per_chunk = 3
(************************************)
(* SECTION : Startup FOR EXPERTS *)
(* Startup options *)
(************************************)
(* How many megabytes should MLdonkey keep for saving configuration files. *)
(* changing this option requires restart of MLDonkey core *)
config_files_security_space = 10
(************************************)
(* SECTION : Paths FOR EXPERTS *)
(* Paths options *)
(************************************)
(* Name of program used for preview (first arg is local filename, second arg
is name of file as searched on eDonkey *)
previewer = mldonkey_previewer
(* Directory where mldonkey binaries are installed *)
mldonkey_bin = "."
(* Name of GUI to start *)
mldonkey_gui = "./mlgui"
(************************************)
(* SECTION : Other FOR EXPERTS *)
(* Other options *)
(************************************)
(* Buffer writes and flush after buffer_writes_delay seconds (experimental) *)
(* changing this option requires restart of MLDonkey core *)
buffer_writes_delay = 30.
(* Flush buffers if buffers exceed buffer_writes_threshold kB (experimental) *)
buffer_writes_threshold = 1024
(* The conversions to apply on Unicode characters *)
utf8_filename_conversions = []
(* The size of the buffer between the client and its GUI. Can be useful
to increase when the connection between them has a small bandwith *)
interface_buffer = 1000000
(* The size long names will be shortened to in the interface *)
max_name_len = 50
(* The maximum number of different filenames used by MLDonkey *)
max_filenames = 50
(* The size long client names will be shortened to in the interface *)
max_client_name_len = 25
(* Is the default terminal an ANSI terminal (escape sequences can be used) *)
term_ansi = true
(* Delay between updates to the GUI *)
update_gui_delay = 1.
(* The realm shown when connecting with a WEB browser *)
http_realm = MLdonkey
(* This option controls whether the WEB interface should show frame borders or not *)
html_frame_border = true
(* The height of the command frame in pixel (depends on your screen and browser sizes) *)
commands_frame_height = 46
(* Message printed at startup additional to welcome text *)
motd_html = ""
(* Force compaction every <n> hours (in [1..24]) *)
compaction_delay = 2
(* The delay between reloads of the vd output in the WEB interface *)
vd_reload_delay = 120
(* Should the MLSUBMIT.REG file be created *)
create_mlsubmit = true
(* Size of the minor heap in kB *)
minor_heap_size = 32
(* The source queues to display in source lists (see 'sources' command) *)
relevant_queues = [
0;
1;
2;
3;
4;
5;
6;
8;
9;
10;]
(* The minimal delay between two connections to the same client (in seconds) *)
min_reask_delay = 600
(* Whether to display results already downloaded *)
display_downloaded_results = true
(* Minimal number of results for filter form to appear *)
filter_table_threshold = 50
(* Maximal size in byte of the buffers of a client, minimum 50.000 byte.
For high-volume links raise this value to 1.000.000 or higher. *)
client_buffer_size = 500000
(* The delay between two saves of the 'downloads.ini' file (default is 15 minutes).
Changes to this option require a core restart. *)
(* changing this option requires restart of MLDonkey core *)
save_options_delay = 900.
(* timeout when connecting to a server *)
server_connection_timeout = 30.
(* The delay between one glance at a file and another *)
(* changing this option requires restart of MLDonkey core *)
download_sample_rate = 1.
(* How many samples go into an estimate of transfer rates *)
download_sample_size = 100
(* This option defines a set of date at which some commands have to be executed.
For each tuple, the first argument is a list of week days (from 0 to 6),
the second is a list of hours (from 0 to 23) and the last one a command to
execute. Can be used with 'pause all' and 'resume all' for example to
resume and pause downloads automatically for the night. *)
calendar = []
(* The percentage of free memory before a compaction is triggered *)
compaction_overhead = 25
(* The major GC speed is computed from this parameter. This is the memory
that will be "wasted" because the GC does not immediatly collect
unreachable blocks. It is expressed as a percentage of the memory used
for live data. The GC will work more (use more CPU time and collect
blocks more eagerly) if space_overhead is smaller. *)
space_overhead = 80
(* Maximal number of results displayed for a search *)
max_displayed_results = 1000
(* (internal option) *)
(* Do not change this option, internal use only! *)
options_version = 20
(* Maximum number of comments per file *)
max_comments_per_file = 100
(* Maximum length of file comments *)
max_comment_length = 256
