Slacky & Swaret

susumella · Messaggio da **susumella** » mar 8 feb 2005, 17:54

Ciao a tutti
 ho provato a cercare sul forum, ma niente mi è stato d´aiuto. La domanda è semplice: perchè non riesco a scaricare i pacchetti presenti su Slacky tramite swaret? Le istruzioni le ho seguite, l´update crea i file, ma quando faccio la ricerca non trova assolutamente nulla!
 
 Help me

mitico · Messaggio da **mitico** » mar 8 feb 2005, 18:29

non so io l´ho fatto oggi ed ha funzionato

susumella · Messaggio da **susumella** » mar 8 feb 2005, 18:47

Potresti postarmi lo swaret.conf? Che versione usi?

Messaggio da **Harp** » mar 8 feb 2005, 18:55

RET EXAMPLE CONFIGURATION FILE ###
 #
 # Define a valid Slackware Linux Version.
 # (Used for Dependency Support and other Features)
 #
 # NOTE: If you want to use Slackware Linux Current,
 # set VERSION to ´current´ (VERSION=current).
 #
 VERSION=current
 #
 # Define the language for status and error messages
 LANGUAGE=ITALIANO
 #
 # ----------------------------------------------------------
 # Define Slackware (8.1 or Higher or Current) Linux Mirrors.
 # (Used for Official Slackware Linux Packages)
 # (Slackware Linux Mirrors available at <a href="http://www.slackware.com" target="_blank" target="_new">http://www.slackware.com</a>)
 #
 # Syntax: ROOT=PROTOCOL:URL
 #
 # NOTE: swaret will use the order of the specified ROOT URL´s.
 #
 #ROOT=file:/mnt/cdrom
 #ROOT=file:/mnt/dvdrom
 #ROOT=file:/mnt/usbmemstick
 ROOT=ftp://ftp.nluug.nl/pub/os/Linux/distr/s ... e-$VERSION
 ROOT=http://sunsite.cnlab-switch.ch/ftp/mirr ... e-$VERSION
 ROOT=ftp://ftp.slackware.no/pub/linux/slackw ... e-$VERSION
 ROOT=http://www.slackware.no/slackware/slackware-$VERSION
 ROOT=ftp://ftp.slackware.at/slackware-$VERSION
 ROOT=http://www.slackware.at/data/slackware-$VERSION
 ROOT=ftp://ftp.planetmirror.com/pub/slackwar ... e-$VERSION
 ROOT=http://ftp.planetmirror.com/pub/slackwa ... e-$VERSION
 #ROOT=rsync://rsync.slackware.no/slackware/slackware-$VERSION
 #ROOT=rsync://rsync.slackware.at/slackware/slackware-$VERSION
 #ROOT=file:/pub/slackware
 #ROOT=file:/mnt/nfsshare/slackware
 #ROOT=file:/mnt/sambashare/slackware
 #
 # -----------------------------------------------------------
 # Define Repository URL´s with Slackware Linux Packages.
 # (Used for Repository Slackware Linux Packages)
 # (Repository URL´s available at <a href="http://www.swaret.org/?menu=sp" target="_blank" target="_new">http://www.swaret.org/?menu=sp</a>)
 #
 # NOTE 1: To use a Local Repository or Remote Repository,
 # be sure it contains the following Files:
 # - CHECKSUMS.md5 (For MD5 Sum, REQUIRED)
 # - FILELIST.TXT (For Package Name + Size, REQUIRED)
 # - PACKAGES.TXT (For Package Description, NOT REQUIRED)
 # - MANIFEST.bz2 (For Dependency Support, NOT REQUIRED)
 # NOTE 2: To create your own Repository, use ´swaret-tools´.
 # You can get ´swaret-tools´ at <a href="http://www.swaret.org" target="_blank" target="_new">http://www.swaret.org</a>!
 #
 # Syntax: REPOS_ROOT=REPOSITORYNAME%PROTOCOL:URL
 #
 # NOTE 1: The REPOSITORY NAME can only be ONE Keyword!
 # NOTE 2: swaret will use the order of the specified REPOS_ROOT URL´s.
 #
 REPOS_ROOT=BlazeBox%http://users.lichtsnel.nl/pub/slackware
 REPOS_ROOT=CuoreDOTORG%http://heart.cuore.org/packages/slackware
 REPOS_ROOT=LinuxPackagesDOTNET.FTP%ftp://ftp3.linuxpackages.net/pub/Slackware-10.0
 REPOS_ROOT=LinuxPackagesDOTNET.HTTP%http://www2.linuxpackages.net/Slackware-10.0
 REPOS_ROOT=SlackPack%http://packs.slack.it/
 REPOS_ROOT=GurnoDOTCOM%http://gurno.com/adam/slack/
 REPOS_ROOT=Slacky.it%http://www.slacky.it/download
 #
 # ------------------------------------------------------------
 # Define Libraries (8.1 or Higher or Current) List Mirrors.
 # (Used for Dependency Support)
 #
 # NOTE 1: You need to specify a Libraries List Mirror which
 # contains a ´libraries-VERSION´ File.
 #
 # NOTE 2: To create the Libraries List, use ´swaret-tools´.
 # You can get ´swaret-tools´ at <a href="http://www.swaret.org" target="_blank" target="_new">http://www.swaret.org</a>!
 # You can also clear all DEP_ROOT Variable(s) which will
 # allow swaret to create the Libraries List for you
 # during Dependency Check using the defined ROOT Variable(s) above.
 #
 # Syntax: DEP_ROOT=PROTOCOL:URL
 #
 # NOTE: swaret will use the order of the specified DEP_ROOT URL´s.
 #
 #DEP_ROOT=file:/mnt/cdrom
 #DEP_ROOT=file:/mnt/dvdrom
 #DEP_ROOT=file:/mnt/usbmemstick
 DEP_ROOT=http://www.swaret.org/swaret
 DEP_ROOT=ftp://ftp.swaret.org/swaret
 #DEP_ROOT=rsync://rsync.swaret.org/swaret
 #DEP_ROOT=file:/pub/swaret
 #DEP_ROOT=file:/mnt/nfsshare/swaret
 #DEP_ROOT=file:/mnt/sambashare/swaret
 #
 # ----------------------------------------------------------
 # General Settings
 #
 # Do you want swaret to use Random Slackware Linux Mirrors?
 # -> 1 for yes, 0 for no.
 #
 RANDOMR=0
 #
 # Do you want swaret to parse all the Package Descriptions?
 # -> If set to 1, swaret will also match Packages whose Description
 # is matching the Keyword(s) you specify after --ACTION.
 # NOTE: swaret will parse all the Package Descriptions for this,
 # and might slow down swaret when using an older System.
 # -> If set to 0, swaret will not use Package Descriptions
 # to match one or more Packages.
 #
 USEPKGDESC=0
 #
 # If you don´t want swaret to Upgrade, Install, Re-Install, Download,...
 # some Packages, add the KEYWORDS to the EXCLUDE Variable.
 # To disable Exclude Method: swaret --exclude -off
 # To enable Exclude Method: swaret --exclude -on
 #
 # NOTE: You can add ANY EXTENDED REGEXP (Regular Expression) to the EXCLUDE Variable(s)
 #
 # Basic Exclude
 #
 EXCLUDE=kernel
 EXCLUDE=lilo swaret
 EXCLUDE=MANIFEST.bz2$
 EXCLUDE=.*dl$ .*PACKAGER$ .*MYBUILD$
 #EXCLUDE=kde*
 EXCLUDE=xine*
 EXCLUDE=qt-*
 EXCLUDE=j2sdk
 EXCLUDE=lopster
 # Advanced Exclude
 # Syntax: KEYWORD[DONT_EXCLUDE_ME_KEYWORD1,DONT_EXCLUDE_ME_KEYWORD2,...]
 # Example: kde-i18n[nl,en_GB] koffice-i18n[nl,en_GB]
 #
 #
 # Do you want to enable Dependency Check?
 # -> If set to 1, swaret will start the Dependency Check after
 # every Upgrade, Install and Re-Install Procedure.
 # -> If set to 0, swaret will not start the Dependency Check
 # after any Procedure.
 #
 DEPENDENCY=1
 #
 # Do you want swaret to Search for missing Libraries (and Fix)
 # which could be found on your System, but not tracked by ldconfig?
 # -> 1 for yes, 0 for no.
 #
 DSEARCHLIB=1
 #
 # Set to 1, if you want swaret to use the ´slocate´ program
 # to Search for missing Libraries.
 # (be sure to issue the ´updatedb´ Command regularly!)
 # If DSEARCHM is set to 0, swaret will use
 # the ´find´ program to locate missing Libraries.
 # -> 1 for yes, 0 for no.
 #
 DSEARCHM=0
 #
 # Start MD5 Check after Fetching Packages, Patches and Sources?
 # -> 1 for yes, 0 for no.
 #
 MD5CHECK=1
 #
 # Start GPG Signature Check after Fetching Packages, Patches and Sources?
 #
 # NOTE: Check out F.A.Q. (--faq gpg) how to Import a Public GPG Key which
 # will be used by the GPG Signature Check.
 #
 # -> 1 for yes, 0 for no.
 #
 GPGCHECK=0
 #
 # Show Description for Packages during
 # Upgrade, Install, Re-Install,... Procedures?
 # -> If set to 0, you will not see a Description.
 # -> If set to 1, you will see a Description.
 #
 DESC=0
 #
 # Cache Directory for (Repository) Packages and Sources.
 #
 CACHE_DIR=/var/swaret
 #
 # Enable Logging?
 # -> 1 for yes, 0 for no.
 #
 LOG=1
 #
 # swaret Log File
 #
 LOG_FILE=/var/log/swaret
 #
 # Show Warnings?
 # -> 1 for yes, 0 for no.
 #
 WARNINGS=1
 #
 # Show Information?
 # -> 1 for yes, 0 for no.
 #
 INFORMATION=1
 #
 # -------------------------------------------------------------
 # Network Settings
 #
 # Network Interface
 # Use this if you have a Network Interface.
 #
 NIC=eth0
 #
 # Local Interface
 # Use this if you do not have a Network Interface.
 #
 # For Example (CD-ROM):
 # You got a Slackware Linux CD-ROM,
 # mount the CD-ROM to /mnt/cdrom and
 # set ROOT to ´file:/mnt/cdrom´ in /etc/swaret.conf.
 # Also, set NIC to ´lo´ (Local Loop Device).
 #
 # NIC=lo
 #
 # Progress
 # If set to 0, swaret will use the ´%´ Download Interface.
 # If set to 1, swaret will use the ´size´ Download Interface.
 # If set to 2, swaret will use the ´wget/rsync´ Download Interface.
 #
 PROGRESS=1
 #
 # Timeout for wget and/or rsync.
 # -> Number of seconds for Timeout
 #
 TIMEOUT=35
 #
 # Retries for wget and/or rsync.
 # -> Number of Retries
 #
 RETRIES=5
 #
 # Behind a Firewall? Using FTP Mirrors?
 # -> 1 for yes, 0 for no
 #
 PASSIVE_FTP=1
 #
 # If you want HTTP or FTP Proxy Support,
 # uncomment and Setup the following Variable:
 #
 # WGET_PROXY=http://IP or HOST:PORT
 #
 # If you want RSYNC Proxy Support,
 # uncomment and Setup the following Variable:
 #
 # RSYNC_PROXY=IP or HOST:PORT
 #
 ### /etc/swaret.conf - SWARET EXAMPLE CONFIGURATION FILE ###

susumella · Messaggio da **susumella** » mar 8 feb 2005, 18:59

Grazie!
 Però se non ho capito male il funzionamento di swaret, con questa configurazione Slacky è l´ultimo in cui swaret vada a vedere se ci sono i file che cerchi. Se come REPOS lo lascio da solo e cerco un pacchetto presente sul sito, lui non lo trova!

susumella · Messaggio da **susumella** » mar 8 feb 2005, 19:13

E´ ufficiale... non calcola i REPOSITORY!

susumella · Messaggio da **susumella** » ven 11 feb 2005, 0:37

Dunque, ho trovato il problema, ma non me lo spiego, nè so come risolverlo... mi spiego: tutto nasce dal fatto che ho cambiato la directory di CACHE, ponendola su una partizione FAT. Ho notato che l´update produce 3 file e non 5! Quindi i pacchetti dei REPOS non mi vengono letti... qualcuno ha idea?
 
 Grazie
 
 Susu

susumella · Messaggio da **susumella** » sab 12 feb 2005, 15:59

Nessuna idea? Mi sa che sarò costretto a toglierlo... nella partizione di linux non ho molto spazio...