Ragazzi grazie per i consigli ma ho ancora problemi , vi descrivo la situazione, al momento sono collegato al router con cavo ethernet con indirizzo statico 192.168.1.3 ( vorrei passare al wireless sempre con lo stesso indirizzo)
Nel router ho creato la connessione wireless di nome "keepout"
con queste impostazioni
WPA: WPA-PSK
WPA mode: WPA/WPA2 mixed mode
psk: una certa psk
i file sono questi:
/etc/wpa_supplicant.conf
Codice: Seleziona tutto
# See /usr/doc/wpa_supplicant-0.5.10/wpa_supplicant.conf.sample
# for many more options that you can use in this file.
# This line enables the use of wpa_cli which is used by rc.wireless
# if possible (to check for successful association)
ctrl_interface=/var/run/wpa_supplicant
# By default, only root (group 0) may use wpa_cli
ctrl_interface_group=wifi_group
eapol_version=1
ap_scan=1
fast_reauth=1
# WPA protected network, supply your own ESSID and WPAPSK here:
network={
scan_ssid=0
ssid="keepout"
proto=WPA
key_mgmt=WPA-PSK
pairwise=CCMP TKIP
group=CCMP TKIP WEP104 WEP40
#psk="mia psk"
psk=0...............................cut..............................4
}
# Plaintext connection (no WPA, no IEEE 802.1X),
# nice for hotel/airport types of WiFi network.
network={
key_mgmt=NONE
priority=0
}
Codice: Seleziona tutto
# Wireless LAN adapter configuration
#
# Theory of operation :
#
# The script attempts to match a block of settings to the specific wireless
# card inserted, the *first* block matching the card is used.
# The address format is "hwaddr", with * as a wildcard.
# 'hwaddr' is the unique MAC address identifier of the wireless card.
# The MAC address is usually printed on the card, or can be found via ifconfig.
# Some examples here use only half of the MAC address with a wildcard to
# match a whole family of cards...
#
# All the Wireless specific configuration is done through the Wireless
# Extensions, so we will just call 'iwconfig' with the right parameters
# defined below.
# Of course, you need to have iwconfig installled on your system.
# To download iwconfig, or for more info on Wireless Extensions :
# http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html
#
# Note : you don't need to fill all parameters, leave them blank, in most
# cases the driver will initialise itself with sane defaults values or
# automatically figure out the value... And no drivers do support all
# possible settings...
#
# -- This is a modified '/etc/pcmcia/wireless.opts' script --
# -- I added sections for Prism/GT and Atheros based cards --
# -- (supported by the prism54 and madwifi drivers) --
# -- 16/sep/2004 * Eric Hameleers --
#
VERBOSE=1
case "$HWADDR" in
## NOTE : Comment out the following five lines to activate the samples below ...
## --------- START SECTION TO REMOVE -----------
## Pick up any Access Point, should work on most 802.11 cards
*)
INFO="my ESSID"
ESSID="keepout"
;;
## ---------- END SECTION TO REMOVE ------------
# Here are a few examples with a few Wireless LANs supported...
# The matching is done on the first 3 bytes of the MAC address
# SMC2835W EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Adapter
00:04:E2:*)
INFO="SMC2835W EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Adapter"
# ESSID (extended network name) : My Network, any
ESSID="any"
# NWID/Domain (cell identifier) : 89AB, 100, off
NWID=""
# Operation mode : Ad-Hoc, Managed, Master, Repeater, Secondary, auto
MODE="Managed"
# Frequency or channel : 1, 2, 3 (channel) ; 2.422G, 2.46G (frequency)
FREQ=""
CHANNEL="7"
# Sensitivity (cell size + roaming speed) : 1, 2, 3 ; -70 (dBm)
SENS=""
# Bit rate : auto, 1M, 11M,54M
RATE="auto"
# Encryption key : 4567-89AB-CD, s:password
# Example for 40-bit encryption:
#KEY="883e-aa67-21 [1] key 5501-d0da-87 [2] key 91f5-3368-6b [3] key 2d73-31b7-96 [4]"
# Example for 104-bit encryption (aka 128-bit WEP):
#KEY="d5ad2f05abd048ecf10b1c80c7"
KEY=""
# RTS threshold : off, 500
RTS=""
# Fragmentation threshold : off, 1000
FRAG=""
# Other iwconfig parameters : power off, ap 01:23:45:67:89:AB
IWCONFIG=""
# iwspy parameters : + 01:23:45:67:89:AB
IWSPY=""
# iwpriv parameters : set_port 2, set_histo 50 60
IWPRIV=""
;;
# Multiband Atheros based 802.11a/b/g universal NIC cards
00:05:4E:*)
INFO="Multiband Atheros based 802.11a/b/g universal NIC"
# ESSID (extended network name) : My Network, any
ESSID=""
# Operation mode : Ad-Hoc, Managed, Master, Repeater, Secondary, auto
MODE="Managed"
# Frequency or channel : 1, 2, 3 (channel) ; 2.422G, 2.46G (frequency)
FREQ=""
CHANNEL="7"
# Bit rate : auto, 1M, 11M,54M
RATE="auto"
# Encryption key : 4567-89AB-CD, s:password
# Example for 40-bit encryption:
#KEY="883e-aa67-21 [1] key 5501-d0da-87 [2] key 91f5-3368-6b [3] key 2d73-31b7-96 [4]"
# Example for 104-bit encryption (aka 128-bit WEP):
#KEY="d5ad2f05abd048ecf10b1c80c7"
KEY=""
# Other iwconfig parameters : power off, ap 01:23:45:67:89:AB
IWCONFIG=""
# iwspy parameters : + 01:23:45:67:89:AB
IWSPY=""
# iwpriv parameters : set_port 2, set_histo 50 60
IWPRIV=""
;;
# Lucent Wavelan IEEE (+ Orinoco, RoamAbout and ELSA)
# Note : wvlan_cs driver only, and version 1.0.4+ for encryption support
00:60:1D:*|00:02:2D:*)
INFO="Wavelan IEEE example (Lucent default settings)"
ESSID="Wavelan Network"
MODE="Managed"
#RATE="auto"
KEY="s:secu1"
# To set all four keys, use :
#KEY="s:secu1 [1] key s:secu2 [2] key s:secu3 [3] key s:secu4 [4] key [1]"
# For the RG 1000 Residential Gateway: The ESSID is the identifier on
# the unit, and the default key is the last 5 digits of the same.
#ESSID="084d70"
#KEY="s:84d70"
;;
# Cisco/Aironet 4800/3x0
# Note : MPL driver only (airo/airo_cs), version 1.3 or later
00:40:96:*|00:02:8A:*)
INFO="Cisco/Aironet example (Cisco default settings)"
ESSID="any"
# To set all four ESSID, use iwconfig v21 and the same trick as above
MODE="Managed"
#RATE="11M auto"
#KEY="d5ad2f05abd048ecf10b1c80c7"
KEY="off"
;;
# Samsung MagicLan (+ some other PrismII cards)
# Note : Samsung binary library driver, version 1.20 or later
00:00:F0:*|00:02:78:*)
INFO="Samsung MagicLan example (Samsung default settings)"
ESSID="any"
MODE="Managed"
CHANNEL="4"
RATE="auto"
#KEY="883e-aa67-21 [1] key 5501-d0da-87 [2] key 91f5-3368-6b [3] key 2d73-31b7-96 [4]"
#IWCONFIG="power on"
;;
# Raytheon Raylink/WebGear Aviator2.4
# Note : doesn't work yet, please use for debugging only :-(
00:00:8F:*|00:00:F1:*)
INFO="Raylink/Aviator2.4 example (Aviator default ad-hoc setting)"
ESSID="ADHOC_ESSID"
MODE="Ad-Hoc"
RATE="auto"
IWPRIV="set_framing 1"
;;
# Old Lucent Wavelan
08:00:0E:*)
INFO="Wavelan example (Lucent default settings)"
NWID="0100"
MODE="Ad-Hoc"
FREQ="2.425G"
KEY="off"
;;
# Netwave (Xircom Netwave/Netwave Airsurfer)
00:80:C7:*)
INFO="Netwave example (Netwave default settings)"
NWID="100"
KEY="00"
;;
# Proxim RangeLan2/Symphony (what is the MAC address ???)
XX:XX:XX:*)
INFO="Proxim RangeLan2/Symphony example"
NWID="0"
MODE="Master"
CHANNEL="15"
IWPRIV="setsubchan 1"
;;
# No Wires Needed Swallow 550 and 1100 setting (what is the MAC address ???)
XX:XX:XX:*)
INFO="NWN Swallow example"
ESSID="session"
KEY="0000-0000-00 open"
;;
# Symbol Spectrum24 setting (what is the MAC address ???)
XX:XX:XX:*)
INFO="Symbol Spectrum24 example"
ESSID="Essid string"
;;
# Generic example (decribe all possible settings)
*)
INFO="Fill with your own settings..."
# ESSID (extended network name) : My Network, any
ESSID=""
# NWID/Domain (cell identifier) : 89AB, 100, off
NWID=""
# Operation mode : Ad-Hoc, Managed, Master, Repeater, Secondary, auto
MODE=""
# Frequency or channel : 1, 2, 3 (channel) ; 2.422G, 2.46G (frequency)
FREQ=""
CHANNEL=""
# Sensitivity (cell size + roaming speed) : 1, 2, 3 ; -70 (dBm)
SENS=""
# Bit rate : auto, 1M, 11M
RATE=""
# Encryption key : 4567-89AB-CD, s:password
KEY=""
# RTS threshold : off, 500
RTS=""
# Fragmentation threshold : off, 1000
FRAG=""
# Other iwconfig parameters : power off, ap 01:23:45:67:89:AB
IWCONFIG=""
# iwspy parameters : + 01:23:45:67:89:AB
IWSPY=""
# iwpriv parameters : set_port 2, set_histo 50 60
IWPRIV=""
;;
esac
Codice: Seleziona tutto
#
#
# This file contains the configuration settings for network interfaces.
# If USE_DHCP[interface] is set to "yes", this overrides any other settings.
# If you don't have an interface, leave the settings null ("").
# You can configure network interfaces other than eth0,eth1... by setting
# IFNAME[interface] to the interface's name. If IFNAME[interface] is unset
# or empty, it is assumed you're configuring eth<interface>.
# Several other parameters are available, the end of this file contains a
# comprehensive set of examples.
# =============================================================================
# Config information for eth0:
IPADDR[0]="192.168.1.3"
NETMASK[0]="255.255.255.0"
USE_DHCP[0]=""
DHCP_HOSTNAME[0]=""
# Config information for eth1:
IPADDR[1]=""
NETMASK[1]=""
USE_DHCP[1]=""
DHCP_HOSTNAME[1]=""
# Config information for eth2:
IPADDR[2]=""
NETMASK[2]=""
USE_DHCP[2]=""
DHCP_HOSTNAME[2]=""
# Config information for eth3:
IPADDR[3]=""
NETMASK[3]=""
USE_DHCP[3]=""
DHCP_HOSTNAME[3]=""
# Default gateway IP address:
GATEWAY="192.168.1.1"
# Change this to "yes" for debugging output to stdout. Unfortunately,
# /sbin/hotplug seems to disable stdout so you'll only see debugging output
# when rc.inet1 is called directly.
DEBUG_ETH_UP="yes"
## Example config information for wlan0. Uncomment the lines you need and fill
## in your info. (You may not need all of these for your wireless network)
IFNAME[4]="wlan0"
IPADDR[4]="192.168.1.3"
NETMASK[4]="255.255.255.0"
USE_DHCP[4]="no"
DHCP_HOSTNAME[4]="marcio_network"
DHCP_KEEPRESOLV[4]="yes"
DHCP_KEEPNTP[4]="yes"
DHCP_KEEPGW[4]="yes"
DHCP_IPADDR[4]=""
WLAN_ESSID[4]=keepout
WLAN_MODE[4]=Managed
WLAN_RATE[4]="54M auto"
WLAN_CHANNEL[4]="auto"
WLAN_KEY[4]="a1xxxxxxx21"
WLAN_IWPRIV[4]="set AuthMode=WPAPSK | set EncrypType=TKIP | set WPAPSK=0718a1xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx04"
WLAN_WPA[4]="wpa_supplicant"
WLAN_WPADRIVER[4]="wext"
#WLAN_WPADRIVER[4]="ndiswrapper"
#Added by marcio
WLAN_WPACONF[1]="/etc/wpa_supplicant.conf"
## Some examples of additional network parameters that you can use.
## Config information for wlan0:
#IFNAME[4]="wlan0" # Use a different interface name nstead of
# the default 'eth4'
#HWADDR[4]="00:01:23:45:67:89" # Overrule the card's hardware MAC address
#MTU[4]="" # The default MTU is 1500, but you might need
# 1360 when you use NAT'ed IPSec traffic.
#DHCP_KEEPRESOLV[4]="yes" # If you dont want /etc/resolv.conf overwritten
#DHCP_KEEPNTP[4]="yes" # If you don't want ntp.conf overwritten
#DHCP_KEEPGW[4]="yes" # If you don't want the DHCP server to change
# your default gateway
#DHCP_IPADDR[4]="" # Request a specific IP address from the DHCP
# server
#WLAN_ESSID[4]=DARKSTAR # Here, you can override _any_ parameter
# defined in rc.wireless.conf, by prepending
# 'WLAN_' to the parameter's name. Useful for
# those with multiple wireless interfaces.
#WLAN_IWPRIV[4]="set AuthMode=WPAPSK | set EncrypType=TKIP | set WPAPSK=thekey"
# Some drivers require a private ioctl to be
# set through the iwpriv command. If more than
# one is required, you can place them in the
# IWPRIV parameter (separated with the pipe (|)
# character, see the example).
in quest'ultimo file ho un dubbio su queste righe
WLAN_WPADRIVER[4]="wext"
#WLAN_WPADRIVER[4]="ndiswrapper"
la mia scheda e'
Intel PRO/Wireless 3945ABG Network Connection ho installato i driver appropriati intel, va bene wext che e' generico?
#Added by marcio
WLAN_WPACONF[1]="/etc/wpa_supplicant.conf"
questa riga l'ho aggiunta leggendo un consiglio su un forum non so se sia necessaria
Vi mostro qualche output ora
bash-3.1# /etc/rc.d/rc.inet1 restart
/etc/rc.d/rc.inet1: wlan0 information: 'my ESSID'
Error for wireless request "Set Nickname" (8B1C) :
SET failed on device wlan0 ; Operation not supported.
wlan0 no private ioctls.
wlan0 no private ioctls.
wlan0 no private ioctls.
wpa_supplicant -d -c /etc/wpa_supplicant.conf -i wlan0
Codice: Seleziona tutto
Initializing interface 'wlan0' conf '/etc/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ctrl_interface_group='wifi_group' (DEPRECATED)
eapol_version=1
ap_scan=1
fast_reauth=1
Priority group 0
id=0 ssid='keepout'
id=1 ssid=''
Initializing interface (2) 'wlan0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf
capabilities: key_mgmt 0xf enc 0xf
WEXT: Operstate: linkmode=1, operstate=5
Own MAC address: 00:13:02:3e:af:71
wpa_driver_wext_set_wpa
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_countermeasures
wpa_driver_wext_set_drop_unencrypted
Setting scan request: 0 sec 100000 usec
ctrl_interface_group=7778 (from group name 'wifi_group')
Added interface wlan0
RTM_NEWLINK: operstate=0 ifi_flags=0x1002 ()
Wireless event: cmd=0x8b06 len=8
Ignore event for foreign ifindex 3
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Trying to get current scan results first without requesting a new scan to speed up initial association
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable AP found.
Setting scan request: 0 sec 0 usec
Starting AP scan (broadcast SSID)
Scan requested (ret=0) - scan timeout 5 seconds
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b19 len=8
Received 961 bytes of scan results (4 BSSes)
Scan results: 4
Selecting BSS from priority group 0
Try to find WPA-enabled AP
0: 00:14:7c:bd:3f:46 ssid='keepout' wpa_ie_len=28 rsn_ie_len=22 caps=0x11
selected based on WPA IE
selected WPA AP 00:14:7c:bd:3f:46 ssid='keepout'
Try to find non-WPA AP
Trying to associate with 00:14:7c:bd:3f:46 (SSID='keepout' freq=2462 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 2 proto 1
WPA: set AP WPA IE - hexdump(len=28): dd 1a 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 02 00 50 f2 04 01 00 00 50 f2 02
WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 01 00
WPA: using GTK TKIP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 04 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_wext_set_drop_unencrypted
State: SCANNING -> ASSOCIATING
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_wext_associate
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
RSN: added PMKSA cache candidate 00:14:7c:bd:3f:46 prio 1000
RSN: processing PMKSA candidate list
RSN: not in suitable state for new pre-authentication
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b04 len=12
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b1a len=15
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b04 len=12
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b1a len=15
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
Wireless event: cmd=0x8c02 len=165
Association info event
req_ies - hexdump(len=49): 00 07 6b 65 65 70 6f 75 74 01 08 02 04 0b 16 0c 12 18 24 32 04 30 48 60 6c dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 04 01 00 00 50 f2 02
resp_ies - hexdump(len=16): 01 08 82 84 8b 96 0c 12 18 24 32 04 30 48 60 6c
WPA: set own WPA/RSN IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 04 01 00 00 50 f2 02
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
Wireless event: cmd=0x8b15 len=20
Wireless event: new AP: 00:14:7c:bd:3f:46
State: ASSOCIATING -> ASSOCIATED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
Associated to a new BSS: BSSID=00:14:7c:bd:3f:46
No keys have been configured - skip key clearing
Associated with 00:14:7c:bd:3f:46
WPA: Association event - clear replay counter
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: SUPP_BE entering state IDLE
Setting authentication timeout: 10 sec 0 usec
Cancelling scan request
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
RX EAPOL from 00:14:7c:bd:3f:46
Setting authentication timeout: 10 sec 0 usec
IEEE 802.1X RX: version=1 type=3 length=95
EAPOL-Key type=254
key_info 0x8a (ver=2 keyidx=0 rsvd=0 Pairwise Ack)
key_length=16 key_data_length=0
replay_counter - hexdump(len=8): 00 00 00 00 00 00 01 20
key_nonce - hexdump(len=32): 3d c1 6f f2 50 a2 03 e8 73 c2 06 2a 64 ae ba 1d c6 2f 27 06 82 dc 96 a5 b2 b0 78 0e fa 95 0b fa
key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00
key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
key_mic - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
State: ASSOCIATED -> 4WAY_HANDSHAKE
WPA: RX message 1 of 4-Way Handshake from 00:14:7c:bd:3f:46 (ver=2)
WPA: Renewed SNonce - hexdump(len=32): 29 23 bb 7e a4 29 2c 86 14 82 20 03 f4 58 9f c4 3f 1b d5 90 ea ad b4 e0 4a 4d cc 7f 3e 35 94 60
WPA: PMK - hexdump(len=32): [REMOVED]
WPA: PTK - hexdump(len=64): [REMOVED]
WPA: WPA IE for messaggio 2/4 - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 04 01 00 00 50 f2 02
WPA: Sending EAPOL-Key 2/4
RX EAPOL from 00:14:7c:bd:3f:46
IEEE 802.1X RX: version=1 type=3 length=123
EAPOL-Key type=254
key_info 0x1ca (ver=2 keyidx=0 rsvd=0 Pairwise Install Ack MIC)
key_length=16 key_data_length=28
replay_counter - hexdump(len=8): 00 00 00 00 00 00 01 21
key_nonce - hexdump(len=32): 3d c1 6f f2 50 a2 03 e8 73 c2 06 2a 64 ae ba 1d c6 2f 27 06 82 dc 96 a5 b2 b0 78 0e fa 95 0b fa
key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00
key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
key_mic - hexdump(len=16): 61 d0 d8 76 53 40 f6 68 1d 2c df 28 f4 f5 e4 5c
WPA: Invalid EAPOL-Key MIC when using TPTK - ignoring TPTK
WPA: Could not verify EAPOL-Key MIC - dropping packet
RX EAPOL from 00:14:7c:bd:3f:46
IEEE 802.1X RX: version=1 type=3 length=135
EAPOL-Key type=254
key_info 0x3a2 (ver=2 keyidx=2 rsvd=0 Group Ack MIC Secure)
key_length=32 key_data_length=40
replay_counter - hexdump(len=8): 00 00 00 00 00 00 01 22
key_nonce - hexdump(len=32): 3d c1 6f f2 50 a2 03 e8 73 c2 06 2a 64 ae ba 1d c6 2f 27 06 82 dc 96 a5 b2 b0 78 0e fa 95 0b f8
key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00
key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
key_mic - hexdump(len=16): 53 34 89 01 d1 a6 01 20 34 2b 3b 77 d4 c0 13 8b
WPA: Invalid EAPOL-Key MIC when using TPTK - ignoring TPTK
WPA: Could not verify EAPOL-Key MIC - dropping packet
RTM_NEWLINK: operstate=0 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
EAPOL: startWhen --> 0
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: txStart
WPA: drop TX EAPOL in non-IEEE 802.1X mode (type=1 len=0)
Authentication with 00:14:7c:bd:3f:46 timed out.
Added BSSID 00:14:7c:bd:3f:46 into blacklist
wpa_driver_wext_disassociate
No keys have been configured - skip key clearing
State: 4WAY_HANDSHAKE -> DISCONNECTED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
EAPOL: External notification - portEnabled=0
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: SUPP_BE entering state INITIALIZE
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Scan requested (ret=0) - scan timeout 30 seconds
RTM_NEWLINK: operstate=0 ifi_flags=0x1043 ([UP][RUNNING])
Wireless event: cmd=0x8b15 len=20
Wireless event: new AP: 00:00:00:00:00:00
Added BSSID 00:00:00:00:00:00 into blacklist
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
Driver did not support SIOCSIWENCODEEXT
State: SCANNING -> DISCONNECTED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b19 len=8
Received 458 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 0
Try to find WPA-enabled AP
0: 00:0c:f6:28:19:a5 ssid='Sitecom' wpa_ie_len=0 rsn_ie_len=22 caps=0x11
skip - SSID mismatch
skip - SSID mismatch
1: 00:13:49:c9:90:5d ssid='ZyXEL' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - no WPA/RSN IE
Try to find non-WPA AP
0: 00:0c:f6:28:19:a5 ssid='Sitecom' wpa_ie_len=0 rsn_ie_len=22 caps=0x11
skip - SSID mismatch
skip - privacy mismatch
1: 00:13:49:c9:90:5d ssid='ZyXEL' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - SSID mismatch
skip - privacy mismatch
No APs found - clear blacklist and try again
Removed BSSID 00:00:00:00:00:00 from blacklist (clear)
Removed BSSID 00:14:7c:bd:3f:46 from blacklist (clear)
Selecting BSS from priority group 0
Try to find WPA-enabled AP
0: 00:0c:f6:28:19:a5 ssid='Sitecom' wpa_ie_len=0 rsn_ie_len=22 caps=0x11
skip - SSID mismatch
skip - SSID mismatch
1: 00:13:49:c9:90:5d ssid='ZyXEL' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - no WPA/RSN IE
Try to find non-WPA AP
0: 00:0c:f6:28:19:a5 ssid='Sitecom' wpa_ie_len=0 rsn_ie_len=22 caps=0x11
skip - SSID mismatch
skip - privacy mismatch
1: 00:13:49:c9:90:5d ssid='ZyXEL' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - SSID mismatch
skip - privacy mismatch
No suitable AP found.
Setting scan request: 5 sec 0 usec
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
Wireless event: cmd=0x8c02 len=165
Association info event
req_ies - hexdump(len=49): 00 07 6b 65 65 70 6f 75 74 01 08 02 04 0b 16 0c 12 18 24 32 04 30 48 60 6c dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 04 01 00 00 50 f2 02
resp_ies - hexdump(len=16): 01 08 82 84 8b 96 0c 12 18 24 32 04 30 48 60 6c
WPA: set own WPA/RSN IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 04 01 00 00 50 f2 02
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
Wireless event: cmd=0x8b15 len=20
Wireless event: new AP: 00:14:7c:bd:3f:46
State: DISCONNECTED -> ASSOCIATED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
Associated to a new BSS: BSSID=00:14:7c:bd:3f:46
No keys have been configured - skip key clearing
Network configuration found for the current AP
WPA: Using WPA IE from AssocReq to set cipher suites
WPA: Selected cipher suites: group 8 pairwise 16 key_mgmt 2 proto 1
WPA: clearing AP WPA IE
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 04 01 00 00 50 f2 02
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
Associated with 00:14:7c:bd:3f:46
WPA: Association event - clear replay counter
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: SUPP_BE entering state IDLE
Setting authentication timeout: 10 sec 0 usec
Cancelling scan request
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
RX EAPOL from 00:14:7c:bd:3f:46
Setting authentication timeout: 10 sec 0 usec
IEEE 802.1X RX: version=1 type=3 length=95
EAPOL-Key type=254
key_info 0x8a (ver=2 keyidx=0 rsvd=0 Pairwise Ack)
key_length=16 key_data_length=0
replay_counter - hexdump(len=8): 00 00 00 00 00 00 01 23
key_nonce - hexdump(len=32): 3d c1 6f f2 50 a2 03 e8 73 c2 06 2a 64 ae ba 1d c6 2f 27 06 82 dc 96 a5 b2 b0 78 0e fa 95 0b fc
key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00
key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
key_mic - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
State: ASSOCIATED -> 4WAY_HANDSHAKE
WPA: RX message 1 of 4-Way Handshake from 00:14:7c:bd:3f:46 (ver=2)
WPA: Renewed SNonce - hexdump(len=32): ff ad 09 8c 4d fb 99 c4 4b 44 a1 92 26 96 da 59 f4 c6 ac 7a 48 79 66 f4 c2 bf c4 ee 14 17 63 c5
WPA: PMK - hexdump(len=32): [REMOVED]
WPA: PTK - hexdump(len=64): [REMOVED]
WPA: WPA IE for messaggio 2/4 - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 04 01 00 00 50 f2 02
WPA: Sending EAPOL-Key 2/4
RX EAPOL from 00:14:7c:bd:3f:46
IEEE 802.1X RX: version=1 type=3 length=123
EAPOL-Key type=254
key_info 0x1ca (ver=2 keyidx=0 rsvd=0 Pairwise Install Ack MIC)
key_length=16 key_data_length=28
replay_counter - hexdump(len=8): 00 00 00 00 00 00 01 24
key_nonce - hexdump(len=32): 3d c1 6f f2 50 a2 03 e8 73 c2 06 2a 64 ae ba 1d c6 2f 27 06 82 dc 96 a5 b2 b0 78 0e fa 95 0b fc
key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00
key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
key_mic - hexdump(len=16): 1f 88 9b af 1e 3b 96 83 e2 1f 92 6b 1b 45 90 2b
WPA: Invalid EAPOL-Key MIC when using TPTK - ignoring TPTK
WPA: Could not verify EAPOL-Key MIC - dropping packet
RTM_NEWLINK: operstate=0 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
RX EAPOL from 00:14:7c:bd:3f:46
IEEE 802.1X RX: version=1 type=3 length=135
EAPOL-Key type=254
key_info 0x3b2 (ver=2 keyidx=3 rsvd=0 Group Ack MIC Secure)
key_length=32 key_data_length=40
replay_counter - hexdump(len=8): 00 00 00 00 00 00 01 25
key_nonce - hexdump(len=32): 3d c1 6f f2 50 a2 03 e8 73 c2 06 2a 64 ae ba 1d c6 2f 27 06 82 dc 96 a5 b2 b0 78 0e fa 95 0b fb
key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00
key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
key_mic - hexdump(len=16): 9b fa 14 90 45 fd 25 41 c5 b1 52 38 97 ab d5 3d
WPA: Invalid EAPOL-Key MIC when using TPTK - ignoring TPTK
WPA: Could not verify EAPOL-Key MIC - dropping packet
EAPOL: startWhen --> 0
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: txStart
WPA: drop TX EAPOL in non-IEEE 802.1X mode (type=1 len=0)
Authentication with 00:14:7c:bd:3f:46 timed out.
Added BSSID 00:14:7c:bd:3f:46 into blacklist
wpa_driver_wext_disassociate
No keys have been configured - skip key clearing
State: 4WAY_HANDSHAKE -> DISCONNECTED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
EAPOL: External notification - portEnabled=0
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: SUPP_BE entering state INITIALIZE
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Scan requested (ret=0) - scan timeout 30 seconds
RTM_NEWLINK: operstate=0 ifi_flags=0x1043 ([UP][RUNNING])
Wireless event: cmd=0x8b15 len=20
Wireless event: new AP: 00:00:00:00:00:00
Added BSSID 00:00:00:00:00:00 into blacklist
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
Driver did not support SIOCSIWENCODEEXT
State: SCANNING -> DISCONNECTED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b19 len=8
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No APs found - clear blacklist and try again
Removed BSSID 00:00:00:00:00:00 from blacklist (clear)
Removed BSSID 00:14:7c:bd:3f:46 from blacklist (clear)
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable AP found.
Setting scan request: 5 sec 0 usec
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
Wireless event: cmd=0x8c02 len=165
Association info event
req_ies - hexdump(len=49): 00 07 6b 65 65 70 6f 75 74 01 08 02 04 0b 16 0c 12 18 24 32 04 30 48 60 6c dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 04 01 00 00 50 f2 02
resp_ies - hexdump(len=16): 01 08 82 84 8b 96 0c 12 18 24 32 04 30 48 60 6c
WPA: set own WPA/RSN IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 04 01 00 00 50 f2 02
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
Wireless event: cmd=0x8b15 len=20
Wireless event: new AP: 00:14:7c:bd:3f:46
State: DISCONNECTED -> ASSOCIATED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
Associated to a new BSS: BSSID=00:14:7c:bd:3f:46
No keys have been configured - skip key clearing
Network configuration found for the current AP
WPA: Using WPA IE from AssocReq to set cipher suites
WPA: Selected cipher suites: group 8 pairwise 16 key_mgmt 2 proto 1
WPA: clearing AP WPA IE
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 04 01 00 00 50 f2 02
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
Associated with 00:14:7c:bd:3f:46
WPA: Association event - clear replay counter
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: SUPP_BE entering state IDLE
Setting authentication timeout: 10 sec 0 usec
Cancelling scan request
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
RX EAPOL from 00:14:7c:bd:3f:46
Setting authentication timeout: 10 sec 0 usec
IEEE 802.1X RX: version=1 type=3 length=95
EAPOL-Key type=254
key_info 0x8a (ver=2 keyidx=0 rsvd=0 Pairwise Ack)
key_length=16 key_data_length=0
replay_counter - hexdump(len=8): 00 00 00 00 00 00 01 26
key_nonce - hexdump(len=32): 3d c1 6f f2 50 a2 03 e8 73 c2 06 2a 64 ae ba 1d c6 2f 27 06 82 dc 96 a5 b2 b0 78 0e fa 95 0b fe
key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00
key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
key_mic - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
State: ASSOCIATED -> 4WAY_HANDSHAKE
WPA: RX message 1 of 4-Way Handshake from 00:14:7c:bd:3f:46 (ver=2)
WPA: Renewed SNonce - hexdump(len=32): cf d1 07 a3 ab c6 66 2b 05 01 75 cb eb 7f 84 d0 a1 92 5f c2 4b 12 1a 35 19 46 7b ac 0f 16 bf 40
WPA: PMK - hexdump(len=32): [REMOVED]
WPA: PTK - hexdump(len=64): [REMOVED]
WPA: WPA IE for messaggio 2/4 - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 04 01 00 00 50 f2 02
WPA: Sending EAPOL-Key 2/4
RX EAPOL from 00:14:7c:bd:3f:46
IEEE 802.1X RX: version=1 type=3 length=123
EAPOL-Key type=254
key_info 0x1ca (ver=2 keyidx=0 rsvd=0 Pairwise Install Ack MIC)
key_length=16 key_data_length=28
replay_counter - hexdump(len=8): 00 00 00 00 00 00 01 27
key_nonce - hexdump(len=32): 3d c1 6f f2 50 a2 03 e8 73 c2 06 2a 64 ae ba 1d c6 2f 27 06 82 dc 96 a5 b2 b0 78 0e fa 95 0b fe
key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00
key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
key_mic - hexdump(len=16): 12 e3 a0 90 d9 14 b0 fa 50 a5 80 b8 92 67 b5 79
WPA: Invalid EAPOL-Key MIC when using TPTK - ignoring TPTK
WPA: Could not verify EAPOL-Key MIC - dropping packet
RTM_NEWLINK: operstate=0 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
RX EAPOL from 00:14:7c:bd:3f:46
IEEE 802.1X RX: version=1 type=3 length=135
EAPOL-Key type=254
key_info 0x3a2 (ver=2 keyidx=2 rsvd=0 Group Ack MIC Secure)
key_length=32 key_data_length=40
replay_counter - hexdump(len=8): 00 00 00 00 00 00 01 28
key_nonce - hexdump(len=32): 3d c1 6f f2 50 a2 03 e8 73 c2 06 2a 64 ae ba 1d c6 2f 27 06 82 dc 96 a5 b2 b0 78 0e fa 95 0b fd
key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00
key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
key_mic - hexdump(len=16): 5f 88 65 5d 0c 5e 39 c9 7a 57 31 72 b2 6c 66 c3
WPA: Invalid EAPOL-Key MIC when using TPTK - ignoring TPTK
WPA: Could not verify EAPOL-Key MIC - dropping packet
EAPOL: startWhen --> 0
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: txStart
WPA: drop TX EAPOL in non-IEEE 802.1X mode (type=1 len=0)
Authentication with 00:14:7c:bd:3f:46 timed out.
Added BSSID 00:14:7c:bd:3f:46 into blacklist
wpa_driver_wext_disassociate
No keys have been configured - skip key clearing
State: 4WAY_HANDSHAKE -> DISCONNECTED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
EAPOL: External notification - portEnabled=0
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: SUPP_BE entering state INITIALIZE
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Scan requested (ret=0) - scan timeout 30 seconds
RTM_NEWLINK: operstate=0 ifi_flags=0x1043 ([UP][RUNNING])
Wireless event: cmd=0x8b15 len=20
Wireless event: new AP: 00:00:00:00:00:00
Added BSSID 00:00:00:00:00:00 into blacklist
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
Driver did not support SIOCSIWENCODEEXT
State: SCANNING -> DISCONNECTED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
CTRL-EVENT-TERMINATING - signal 2 received
Removing interface wlan0
State: DISCONNECTED -> DISCONNECTED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_wext_set_wpa
wpa_driver_wext_set_drop_unencrypted
wpa_driver_wext_set_countermeasures
No keys have been configured - skip key clearing
Removed BSSID 00:00:00:00:00:00 from blacklist (clear)
Removed BSSID 00:14:7c:bd:3f:46 from blacklist (clear)
Cancelling scan request
Cancelling authentication timeout
WEXT: Operstate: linkmode=0, operstate=6
non mi convincono questi errori
ioctl[SIOCSIWENCODEEXT]: No such file or directory
ioctl[SIOCSIWENCODEEXT]: No such file or directory
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 5 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported
