Ma nulla : Any ESSID.
Non so dove prenda questa informazione.
Vi prego......AIUTOOOOOOOOOOOOOOOOOOOOOOOOOO!!!!
Windows pc vs Linux notebook wireless!
Moderatore: Staff
Regole del forum
1) Citare sempre la versione di Slackware usata, la versione del Kernel e magari anche la versione della libreria coinvolta. Questi dati aiutano le persone che possono rispondere.
2) Per evitare confusione prego inserire in questo forum solo topic che riguardano appunto Slackware, se l'argomento è generale usate il forum Gnu/Linux in genere.
3) Leggere attentamente le risposte ricevute.
4) Scrivere i messaggi con il colore di default, evitare altri colori.
5) Scrivere in Italiano o in Inglese, se possibile grammaticalmente corretto, evitate stili di scrittura poco chiari, quindi nessuna abbreviazione tipo telegramma o scrittura stile SMS o CHAT.
6) Appena registrati è consigliato presentarsi nel forum dedicato.
La non osservanza delle regole porta a provvedimenti di vari tipo da parte dello staff, in particolare la non osservanza della regola 5 porta alla cancellazione del post e alla segnalazione dell'utente. In caso di recidività l'utente rischia il ban temporaneo.
1) Citare sempre la versione di Slackware usata, la versione del Kernel e magari anche la versione della libreria coinvolta. Questi dati aiutano le persone che possono rispondere.
2) Per evitare confusione prego inserire in questo forum solo topic che riguardano appunto Slackware, se l'argomento è generale usate il forum Gnu/Linux in genere.
3) Leggere attentamente le risposte ricevute.
4) Scrivere i messaggi con il colore di default, evitare altri colori.
5) Scrivere in Italiano o in Inglese, se possibile grammaticalmente corretto, evitate stili di scrittura poco chiari, quindi nessuna abbreviazione tipo telegramma o scrittura stile SMS o CHAT.
6) Appena registrati è consigliato presentarsi nel forum dedicato.
La non osservanza delle regole porta a provvedimenti di vari tipo da parte dello staff, in particolare la non osservanza della regola 5 porta alla cancellazione del post e alla segnalazione dell'utente. In caso di recidività l'utente rischia il ban temporaneo.
-
flashman
- Linux 1.x
- Messaggi: 109
- Iscritto il: mar 16 set 2008, 17:32
- Slackware: 12.1
- Kernel: 2.6.24.5
- Desktop: fluxbox
Re: Windows pc vs Linux notebook wireless!
Ho provato anche a configurare rc.wireless.conf.
Ma nulla : Any ESSID.
Non so dove prenda questa informazione.
Vi prego......AIUTOOOOOOOOOOOOOOOOOOOOOOOOOO!!!!
Ma nulla : Any ESSID.
Non so dove prenda questa informazione.
Vi prego......AIUTOOOOOOOOOOOOOOOOOOOOOOOOOO!!!!
-
slucky
- Iper Master
- Messaggi: 2420
- Iscritto il: mar 1 mag 2007, 15:30
- Slackware: 15.0
- Desktop: xfce4
- Distribuzione: FreeBSD
Re: Windows pc vs Linux notebook wireless!
in rc.wireless.conf commenta queste voci:
e poi riavvia la rete: /etc/rc.d/rc.inet1 wlan0_restart e vedi se funziona...## NOTE : Comment out the following five lines to activate the samples below ...
## --------- START SECTION TO REMOVE -----------
## Pick up any Access Point, should work on most 802.11 cards
##*)
## INFO="Any ESSID"
## ESSID=
## ;;
## ---------- END SECTION TO REMOVE ------------
-
flashman
- Linux 1.x
- Messaggi: 109
- Iscritto il: mar 16 set 2008, 17:32
- Slackware: 12.1
- Kernel: 2.6.24.5
- Desktop: fluxbox
Re: Windows pc vs Linux notebook wireless!
Mi dice :
./rc.inet1 : wlan0 Information : 'Fill with your own settings....'
Perchè, dovrei avere settato tutto in rc.wireless.conf.
Non prende i parametri di wireless.conf.
OK! Il problema è che non prende i parametri.
Non capisco perchè. Se li passo a mano con iwconfig, tipo nome della rete e mode Ad-Hoc, funziona.
Riesco a pingare il PC fisso. con rc.inet1, nulla da fare.
Perchè ? In wireless.conf ho messo tutto!!!
./rc.inet1 : wlan0 Information : 'Fill with your own settings....'
Perchè, dovrei avere settato tutto in rc.wireless.conf.
Non prende i parametri di wireless.conf.
OK! Il problema è che non prende i parametri.
Non capisco perchè. Se li passo a mano con iwconfig, tipo nome della rete e mode Ad-Hoc, funziona.
Riesco a pingare il PC fisso. con rc.inet1, nulla da fare.
Perchè ? In wireless.conf ho messo tutto!!!
-
slucky
- Iper Master
- Messaggi: 2420
- Iscritto il: mar 1 mag 2007, 15:30
- Slackware: 15.0
- Desktop: xfce4
- Distribuzione: FreeBSD
Re: Windows pc vs Linux notebook wireless!
in realtà wireless.conf è deprecato, cioè non è più necessario configurarlo per il wi-fi, il file essenziale di riferimento resta rc.inet1.conf...ma ti dirò che ad es. io sulla 12.2 non l'ho neanche configurato e mi collego in rete con chiave wpa con i soli comandi da terminale 
anche se ti da quel messaggio, il wi-fi dovrebbe comunque funzionare, però guardando il tuo .conf vedo che hai messo 2 indirizzi IP identici a 2 diverse interfacce di rete e questo può creare un conflitto, comunque se usi il dhcp e vuoi utilizzare l'IP che vuoi tu, prova così:
da:
a:
anche in questa sezione, dovresti mettere i dati del tuo router, se poi usi già il wpa_supplicant, non è necessario farlo :
anche se ti da quel messaggio, il wi-fi dovrebbe comunque funzionare, però guardando il tuo .conf vedo che hai messo 2 indirizzi IP identici a 2 diverse interfacce di rete e questo può creare un conflitto, comunque se usi il dhcp e vuoi utilizzare l'IP che vuoi tu, prova così:
da:
Codice: Seleziona tutto
IFNAME[4]="wlan0"
IPADDR[4]="192.168.2.200"
NETMASK[4]="255.255.255.0"
USE_DHCP[4]=""
DHCP_HOSTNAME[4]=""
##DHCP_KEEPRESOLV[4]="yes"
#DHCP_KEEPNTP[4]="yes"
#DHCP_KEEPGW[4]="yes"
#DHCP_IPADDR[4]=""a:
Codice: Seleziona tutto
IFNAME[4]="wlan0"
IPADDR[4]=""
NETMASK[4]=""
USE_DHCP[4]="yes"
DHCP_HOSTNAME[4]=""
##DHCP_KEEPRESOLV[4]="yes"
#DHCP_KEEPNTP[4]="yes"
DHCP_KEEPGW[4]="yes"
DHCP_IPADDR[4]="192.168.2.200"Codice: Seleziona tutto
#WLAN_ESSID[4]=BARRIER05
#WLAN_MODE[4]=Managed
##WLAN_RATE[4]="54M auto"
##WLAN_CHANNEL[4]="auto"-
NetNightmare
- Linux 1.x
- Messaggi: 175
- Iscritto il: lun 18 ago 2008, 11:00
- Nome Cognome: Giuseppe De Nicolo'
- Slackware: 13.37 x86_64
- Kernel: 2.6.37.6-smp
- Desktop: Fluxbox
- Località: Rome
Re: Windows pc vs Linux notebook wireless!
Giusto per fare un po di chiarezza ... xche per i vari tentavi non capisco piu le modifiche che hai fatto
il file rc.wireless.conf e' deprecato e lo puoi pure cancellare ( elimina l'errore "Any ESSID")
nel file rc.inet1.conf
inserisci una roba del genere :
a questo punto in /etc/wpa_supplicant.conf
rimetti a posto le altre eventuali modifiche che hai fatto dai un /etc/rc.d/rc.inet1 restart e vediamo che succede
il file rc.wireless.conf e' deprecato e lo puoi pure cancellare ( elimina l'errore "Any ESSID")
nel file rc.inet1.conf
inserisci una roba del genere :
Codice: Seleziona tutto
IFNAME[4]="wlan0"
IPADDR[4]=""
NETMASK[4]=""
USE_DHCP[4]="yes"
e poi
WLAN_WPA[4]="wpa_supplicant"
a questo punto in /etc/wpa_supplicant.conf
Codice: Seleziona tutto
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
update_config=1
# e a Seguire in caso di WPA
network={
ssid="your ssid"
psk="your pass"
proto=WPA
key_mgmt=WPA-PSK
pairwise=TKIP
group=TKIP WEP104 WEP40
priority=3
}
# se WEP
network={
ssid="your ssid"
scan_ssid=1
key_mgmt=NONE
wep_key0=your_ASCII_ wep
wep_tx_keyidx=1
priority=2
}
-
flashman
- Linux 1.x
- Messaggi: 109
- Iscritto il: mar 16 set 2008, 17:32
- Slackware: 12.1
- Kernel: 2.6.24.5
- Desktop: fluxbox
Re: Windows pc vs Linux notebook wireless!
Scusatemi, ma non ho potuto!
Ho fatto la prova suggerita da NetNightmare.
re.inet1 restart si pianta e non so perchè.
Ho visto che nelle impostazioni per reti had-hoc windows utilizza di default WPA-none. Non mi permette di scegliere altro.
in /var/run non c'è wpa_supplicant come scritto in wpa_supplicant.conf. E' normale ?
Se volessi provare con la rete aperta, per vedere se il tutto sta in piedi,
come devo settare wpa_supplicant ?
Ho fatto la prova suggerita da NetNightmare.
re.inet1 restart si pianta e non so perchè.
Ho visto che nelle impostazioni per reti had-hoc windows utilizza di default WPA-none. Non mi permette di scegliere altro.
in /var/run non c'è wpa_supplicant come scritto in wpa_supplicant.conf. E' normale ?
Se volessi provare con la rete aperta, per vedere se il tutto sta in piedi,
come devo settare wpa_supplicant ?
-
flashman
- Linux 1.x
- Messaggi: 109
- Iscritto il: mar 16 set 2008, 17:32
- Slackware: 12.1
- Kernel: 2.6.24.5
- Desktop: fluxbox
Re: Windows pc vs Linux notebook wireless!
Googlando un poco ho trovato :
Sembra faccia al caso mio. Però sul man di wpa_supplicant leggo :
Non si può usare la key se non in plaintext e WEP. Le cose sembrano in contrasto ?
Qualcuno può chiarirmi ?
Codice: Seleziona tutto
# IBSS/ad-hoc network with WPA-None/TKIP.
network={
ssid="test adhoc"
mode=1
frequency=2412
proto=WPA
key_mgmt=WPA-NONE
pairwise=NONE
group=TKIP
psk="secret passphrase"
}
Codice: Seleziona tutto
mode IEEE 802.11 operation mode; either 0 (infrastructure, default) or
1 (IBSS). Note that IBSS (adhoc) mode can only be used with
key_mgmt set to NONE (plaintext and static WEP).
Qualcuno può chiarirmi ?
-
NetNightmare
- Linux 1.x
- Messaggi: 175
- Iscritto il: lun 18 ago 2008, 11:00
- Nome Cognome: Giuseppe De Nicolo'
- Slackware: 13.37 x86_64
- Kernel: 2.6.37.6-smp
- Desktop: Fluxbox
- Località: Rome
Re: Windows pc vs Linux notebook wireless!
Si e' normale in /var/run dovrestiavre una directory wpa_supplicant il file wpa_supplicant.conf e' in /etc/wpa_supplican.confflashman ha scritto:Scusatemi, ma non ho potuto!
in /var/run non c'è wpa_supplicant come scritto in wpa_supplicant.conf. E' normale ?
come devo settare wpa_supplicant ?
-
NetNightmare
- Linux 1.x
- Messaggi: 175
- Iscritto il: lun 18 ago 2008, 11:00
- Nome Cognome: Giuseppe De Nicolo'
- Slackware: 13.37 x86_64
- Kernel: 2.6.37.6-smp
- Desktop: Fluxbox
- Località: Rome
Re: Windows pc vs Linux notebook wireless!
inoltre prova ad aggiingere questa riga
nel file id configurazione wpa_supplicant.conf aggiung il tuo utente al gruppo wheel ... ( anche se lo dovresti gia aver fatto ) e poi da x prova a rilanciare wpa_cli ... magari da li cominciamo a vedere se almeno wpa_supplicant ti vede la rete wireless
EDIT:
Inoltre prova a fare questo da X apri un terminale
poi
e poi da un altro terminale ( quindi apri una nuova finestra ) e fai
tutto questo come root
adesso nella prima finestra dovresti vedere quello che wpa_supplicant sta facendo prova a postarne l'output e vediamo
P.S. dove wlan0 nelle stringhe e' la tua interfaccia wireless
Codice: Seleziona tutto
ctrl_interface_group=wheel
EDIT:
Inoltre prova a fare questo da X apri un terminale
Codice: Seleziona tutto
/etc/rc.d/rc.inet1 wlan0_stopCodice: Seleziona tutto
wpa_supplicant -w -c /etc/wpa_supplicant.conf -i wlan0 -D wext -d -t -KCodice: Seleziona tutto
/etc/rc.d/rc.inet1 wlan0_startadesso nella prima finestra dovresti vedere quello che wpa_supplicant sta facendo prova a postarne l'output e vediamo
P.S. dove wlan0 nelle stringhe e' la tua interfaccia wireless
-
flashman
- Linux 1.x
- Messaggi: 109
- Iscritto il: mar 16 set 2008, 17:32
- Slackware: 12.1
- Kernel: 2.6.24.5
- Desktop: fluxbox
Re: Windows pc vs Linux notebook wireless!
in var/run non ho nessuna directory.
La creo ?
La creo ?
-
NetNightmare
- Linux 1.x
- Messaggi: 175
- Iscritto il: lun 18 ago 2008, 11:00
- Nome Cognome: Giuseppe De Nicolo'
- Slackware: 13.37 x86_64
- Kernel: 2.6.37.6-smp
- Desktop: Fluxbox
- Località: Rome
Re: Windows pc vs Linux notebook wireless!
no ... prova con le altre cose che ti ho detto la directory wiene creata dal PID di wpa supplicant ( per dirla rozza) non devi creare niente in /var/run
-
flashman
- Linux 1.x
- Messaggi: 109
- Iscritto il: mar 16 set 2008, 17:32
- Slackware: 12.1
- Kernel: 2.6.24.5
- Desktop: fluxbox
Re: Windows pc vs Linux notebook wireless!
Ci sono :
Codice: Seleziona tutto
1232619039.341611: Initializing interface 'wlan0' conf '/etc/wpa_supplicant.conf' driver 'wext' ctrl_interface 'N/A' bridge 'N/A'
1232619039.341662: Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
1232619039.341667: Reading configuration file '/etc/wpa_supplicant.conf'
1232619039.341708: ctrl_interface='/var/run/wpa_supplicant'
1232619039.341713: ctrl_interface_group='0' (DEPRECATED)
1232619039.363968: Priority group 0
1232619039.363971: id=0 ssid='Win2Lin'
1232619039.363977: Initializing interface (2) 'wlan0'
1232619039.366498: EAPOL: SUPP_PAE entering state DISCONNECTED
1232619039.366502: EAPOL: KEY_RX entering state NO_KEY_RECEIVE
1232619039.366504: EAPOL: SUPP_BE entering state INITIALIZE
1232619039.366509: EAP: EAP entering state DISABLED
1232619039.366514: EAPOL: External notification - portEnabled=0
1232619039.366516: EAPOL: External notification - portValid=0
1232619039.368121: SIOCGIWRANGE: WE(compiled)=22 WE(source)=18 enc_capa=0xf
1232619039.368125: capabilities: key_mgmt 0xf enc 0xf
1232619039.410644: WEXT: Operstate: linkmode=1, operstate=5
1232619039.422558: Own MAC address: 00:12:f0:e8:9e:4c
1232619039.422565: wpa_driver_wext_set_wpa
1232619039.422701: wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
1232619039.422710: wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
1232619039.422715: wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
1232619039.422720: wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
1232619039.422724: wpa_driver_wext_set_countermeasures
1232619039.422727: wpa_driver_wext_set_drop_unencrypted
1232619039.422741: Setting scan request: 0 sec 100000 usec
1232619039.423319: ctrl_interface_group=0
1232619039.423369: Added interface wlan0
1232619039.423404: RTM_NEWLINK: operstate=0 ifi_flags=0x1002 ()
1232619039.423408: Wireless event: cmd=0x8b06 len=8
1232619039.423412: RTM_NEWLINK: operstate=0 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
1232619039.423416: RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
1232619039.423422: RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
1232619039.423425: RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
1232619039.526559: State: DISCONNECTED -> SCANNING
1232619039.526565: Starting AP scan (broadcast SSID)
1232619039.526567: Trying to get current scan results first without requesting a new scan to speed up initial association
1232619039.526616: Received 914 bytes of scan results (4 BSSes)
1232619039.526619: Scan results: 4
1232619039.526622: Selecting BSS from priority group 0
1232619039.526624: Try to find WPA-enabled AP
1232619039.526626: 0: ae:77:9e:95:78:80 ssid='Win2Lin' wpa_ie_len=24 rsn_ie_len=0 caps=0x12
1232619039.526633: skip WPA IE - PTK cipher mismatch
1232619039.526635: 1: 00:18:02:85:84:30 ssid='Alice-33356894' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
1232619039.526639: skip - SSID mismatch
1232619039.526641: 2: 00:11:50:7f:5d:7c ssid='Belkin54g' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
1232619039.526645: skip - no WPA/RSN IE
1232619039.526647: 3: 00:1a:70:94:22:4e ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
1232619039.526651: skip - no WPA/RSN IE
1232619039.526652: Try to find non-WPA AP
1232619039.526654: 0: ae:77:9e:95:78:80 ssid='Win2Lin' wpa_ie_len=24 rsn_ie_len=0 caps=0x12
1232619039.526658: skip - non-WPA network not allowed
1232619039.526661: 1: 00:18:02:85:84:30 ssid='Alice-33356894' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
1232619039.526664: skip - SSID mismatch
1232619039.526666: 2: 00:11:50:7f:5d:7c ssid='Belkin54g' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
1232619039.526670: skip - SSID mismatch
1232619039.526672: 3: 00:1a:70:94:22:4e ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
1232619039.526676: skip - SSID mismatch
1232619039.526678: No suitable AP found.
1232619039.526681: Setting scan request: 0 sec 0 usec
1232619039.526688: Starting AP scan (broadcast SSID)
1232619039.526694: Scan requested (ret=0) - scan timeout 5 seconds
1232619039.527263: RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
1232619039.527309: Wireless event: cmd=0x8b15 len=20
1232619039.527311: Wireless event: new AP: 00:00:00:00:00:00
1232619039.527316: Added BSSID 00:00:00:00:00:00 into blacklist
1232619039.527321: CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
1232619039.527323: wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
1232619039.539961: wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
1232619039.539967: wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
1232619039.539971: wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
1232619039.539976: wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
1232619039.539980: State: SCANNING -> DISCONNECTED
1232619039.539983: wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
1232619039.539985: WEXT: Operstate: linkmode=-1, operstate=5
1232619039.539992: EAPOL: External notification - portEnabled=0
1232619039.539997: EAPOL: External notification - portValid=0
1232619039.540001: RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
1232619039.540004: RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
1232619039.938125: RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
1232619039.938129: Wireless event: cmd=0x8b19 len=8
1232619039.938156: Received 913 bytes of scan results (4 BSSes)
1232619039.938167: Scan results: 4
1232619039.938170: Selecting BSS from priority group 0
1232619039.938172: Try to find WPA-enabled AP
1232619039.938174: 0: ae:77:9e:95:78:80 ssid='Win2Lin' wpa_ie_len=24 rsn_ie_len=0 caps=0x12
1232619039.938179: skip WPA IE - PTK cipher mismatch
1232619039.938181: 1: 00:18:02:85:84:30 ssid='Alice-33356894' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
1232619039.938185: skip - SSID mismatch
1232619039.938187: 2: 00:11:50:7f:5d:7c ssid='Belkin54g' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
1232619039.938191: skip - no WPA/RSN IE
1232619039.938193: 3: 00:1a:70:94:22:4e ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
1232619039.938197: skip - no WPA/RSN IE
1232619039.938198: Try to find non-WPA AP
1232619039.938200: 0: ae:77:9e:95:78:80 ssid='Win2Lin' wpa_ie_len=24 rsn_ie_len=0 caps=0x12
1232619039.938204: skip - non-WPA network not allowed
1232619039.938206: 1: 00:18:02:85:84:30 ssid='Alice-33356894' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
1232619039.938210: skip - SSID mismatch
1232619039.938212: 2: 00:11:50:7f:5d:7c ssid='Belkin54g' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
1232619039.938216: skip - SSID mismatch
1232619039.938217: 3: 00:1a:70:94:22:4e ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
1232619039.938221: skip - SSID mismatch
1232619039.938223: No APs found - clear blacklist and try again
1232619039.938225: Removed BSSID 00:00:00:00:00:00 from blacklist (clear)
1232619039.938229: Selecting BSS from priority group 0
1232619039.938230: Try to find WPA-enabled AP
1232619039.938232: 0: ae:77:9e:95:78:80 ssid='Win2Lin' wpa_ie_len=24 rsn_ie_len=0 caps=0x12
1232619039.938237: skip WPA IE - PTK cipher mismatch
1232619039.938239: 1: 00:18:02:85:84:30 ssid='Alice-33356894' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
1232619039.938242: skip - SSID mismatch
1232619039.938244: 2: 00:11:50:7f:5d:7c ssid='Belkin54g' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
1232619039.938248: skip - no WPA/RSN IE
1232619039.938250: 3: 00:1a:70:94:22:4e ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
1232619039.938254: skip - no WPA/RSN IE
1232619039.938255: Try to find non-WPA AP
1232619039.938257: 0: ae:77:9e:95:78:80 ssid='Win2Lin' wpa_ie_len=24 rsn_ie_len=0 caps=0x12
1232619039.938261: skip - non-WPA network not allowed
1232619039.938263: 1: 00:18:02:85:84:30 ssid='Alice-33356894' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
1232619039.938267: skip - SSID mismatch
1232619039.938268: 2: 00:11:50:7f:5d:7c ssid='Belkin54g' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
1232619039.938272: skip - SSID mismatch
1232619039.938274: 3: 00:1a:70:94:22:4e ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
1232619039.938278: skip - SSID mismatch
1232619039.938280: No suitable AP found.
1232619039.938283: Setting scan request: 5 sec 0 usec
1232619039.949545: RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
1232619039.949549: Wireless event: cmd=0x8b15 len=20
1232619039.949551: Wireless event: new AP: 00:1a:70:94:22:4e
1232619039.949554: State: DISCONNECTED -> ASSOCIATED
1232619039.949556: wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
1232619039.949559: WEXT: Operstate: linkmode=-1, operstate=5
1232619039.949569: Associated to a new BSS: BSSID=00:1a:70:94:22:4e
1232619039.949571: No keys have been configured - skip key clearing
1232619039.949576: No network configuration found for the current AP
1232619039.949578: wpa_driver_wext_disassociate
1232619039.949708: No keys have been configured - skip key clearing
1232619039.949710: State: ASSOCIATED -> DISCONNECTED
1232619039.949712: wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
1232619039.949715: WEXT: Operstate: linkmode=-1, operstate=5
1232619039.949719: EAPOL: External notification - portEnabled=0
1232619039.949721: EAPOL: External notification - portValid=0
1232619039.949726: RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
1232619039.949729: RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
1232619039.953163: RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
1232619039.953166: Wireless event: cmd=0x8b15 len=20
1232619039.953168: Wireless event: new AP: 00:00:00:00:00:00
1232619039.953172: Added BSSID 00:00:00:00:00:00 into blacklist
1232619039.953176: CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
1232619039.953179: wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
1232619039.953184: wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
1232619039.953189: wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
1232619039.953194: wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
1232619039.953198: wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
1232619039.953202: State: DISCONNECTED -> DISCONNECTED
1232619039.953205: wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
1232619039.953207: WEXT: Operstate: linkmode=-1, operstate=5
1232619039.953211: EAPOL: External notification - portEnabled=0
1232619039.953214: EAPOL: External notification - portValid=0
1232619040.540000: RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
1232619040.540005: RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
1232619043.106846: RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
1232619043.106851: Wireless event: cmd=0x8b15 len=20
1232619043.106853: Wireless event: new AP: 00:1a:70:94:22:4e
1232619043.106856: State: DISCONNECTED -> ASSOCIATED
1232619043.106859: wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
1232619043.106862: WEXT: Operstate: linkmode=-1, operstate=5
1232619043.106872: Associated to a new BSS: BSSID=00:1a:70:94:22:4e
1232619043.106874: No keys have been configured - skip key clearing
1232619043.106879: No network configuration found for the current AP
1232619043.106880: wpa_driver_wext_disassociate
1232619043.107011: No keys have been configured - skip key clearing
1232619043.107013: State: ASSOCIATED -> DISCONNECTED
1232619043.107015: wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
1232619043.107017: WEXT: Operstate: linkmode=-1, operstate=5
1232619043.107022: EAPOL: External notification - portEnabled=0
1232619043.107024: EAPOL: External notification - portValid=0
1232619043.107028: RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
1232619043.107031: RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
1232619043.110435: RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
1232619043.110438: Wireless event: cmd=0x8b15 len=20
1232619043.110441: Wireless event: new AP: 00:00:00:00:00:00
1232619043.110444: BSSID 00:00:00:00:00:00 blacklist count incremented to 2
1232619043.110449: CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
1232619043.110451: wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
1232619043.110457: wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
1232619043.110482: wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
1232619043.110487: wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
1232619043.110492: wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
1232619043.110496: State: DISCONNECTED -> DISCONNECTED
1232619043.110498: wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
1232619043.110501: WEXT: Operstate: linkmode=-1, operstate=5
1232619043.110514: EAPOL: External notification - portEnabled=0
1232619043.110516: EAPOL: External notification - portValid=0
1232619044.116143: RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
1232619044.116149: RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
1232619044.938769: State: DISCONNECTED -> SCANNING
1232619044.938773: Starting AP scan (broadcast SSID)
1232619044.938779: Scan requested (ret=0) - scan timeout 30 seconds
1232619044.998949: RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
1232619044.998952: Wireless event: cmd=0x8b19 len=8
1232619044.998977: Received 911 bytes of scan results (4 BSSes)
1232619044.998980: Scan results: 4
1232619044.998983: Selecting BSS from priority group 0
1232619044.998985: Try to find WPA-enabled AP
1232619044.998987: 0: ae:77:9e:95:78:80 ssid='Win2Lin' wpa_ie_len=24 rsn_ie_len=0 caps=0x12
1232619044.998992: skip WPA IE - PTK cipher mismatch
1232619044.998995: 1: 00:18:02:85:84:30 ssid='Alice-33356894' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
1232619044.998999: skip - SSID mismatch
1232619044.999001: 2: 00:11:50:7f:5d:7c ssid='Belkin54g' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
1232619044.999005: skip - no WPA/RSN IE
1232619044.999007: 3: 00:1a:70:94:22:4e ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
1232619044.999011: skip - no WPA/RSN IE
1232619044.999012: Try to find non-WPA AP
1232619044.999014: 0: ae:77:9e:95:78:80 ssid='Win2Lin' wpa_ie_len=24 rsn_ie_len=0 caps=0x12
1232619044.999018: skip - non-WPA network not allowed
1232619044.999020: 1: 00:18:02:85:84:30 ssid='Alice-33356894' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
1232619044.999024: skip - SSID mismatch
1232619044.999026: 2: 00:11:50:7f:5d:7c ssid='Belkin54g' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
1232619044.999030: skip - SSID mismatch
1232619044.999032: 3: 00:1a:70:94:22:4e ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
1232619044.999035: skip - SSID mismatch
1232619044.999037: No APs found - clear blacklist and try again
1232619044.999039: Removed BSSID 00:00:00:00:00:00 from blacklist (clear)
1232619044.999042: Selecting BSS from priority group 0
1232619044.999045: Try to find WPA-enabled AP
1232619044.999046: 0: ae:77:9e:95:78:80 ssid='Win2Lin' wpa_ie_len=24 rsn_ie_len=0 caps=0x12
1232619044.999051: skip WPA IE - PTK cipher mismatch
1232619044.999053: 1: 00:18:02:85:84:30 ssid='Alice-33356894' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
1232619044.999057: skip - SSID mismatch
1232619044.999058: 2: 00:11:50:7f:5d:7c ssid='Belkin54g' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
1232619044.999062: skip - no WPA/RSN IE
1232619044.999064: 3: 00:1a:70:94:22:4e ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
1232619044.999068: skip - no WPA/RSN IE
1232619044.999070: Try to find non-WPA AP
1232619044.999071: 0: ae:77:9e:95:78:80 ssid='Win2Lin' wpa_ie_len=24 rsn_ie_len=0 caps=0x12
1232619044.999075: skip - non-WPA network not allowed
1232619044.999077: 1: 00:18:02:85:84:30 ssid='Alice-33356894' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
1232619044.999081: skip - SSID mismatch
1232619044.999083: 2: 00:11:50:7f:5d:7c ssid='Belkin54g' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
1232619044.999087: skip - SSID mismatch
1232619044.999088: 3: 00:1a:70:94:22:4e ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
1232619044.999092: skip - SSID mismatch
1232619044.999094: No suitable AP found.
1232619044.999098: Setting scan request: 5 sec 0 usec
1232619045.663231: RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
1232619045.663235: Wireless event: cmd=0x8b15 len=20
1232619045.663237: Wireless event: new AP: 00:00:00:00:00:00
1232619045.663241: Added BSSID 00:00:00:00:00:00 into blacklist
1232619045.663264: CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
1232619045.663266: wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
1232619045.663273: wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
1232619045.663278: wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
1232619045.663282: wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
1232619045.663287: wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
1232619045.663291: State: SCANNING -> DISCONNECTED
1232619045.663294: wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
1232619045.663296: WEXT: Operstate: linkmode=-1, operstate=5
1232619045.663310: EAPOL: External notification - portEnabled=0
1232619045.663313: EAPOL: External notification - portValid=0
1232619046.380352: RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
1232619046.380357: Wireless event: cmd=0x8b15 len=20
1232619046.380359: Wireless event: new AP: 00:1a:70:94:22:4e
1232619046.380363: State: DISCONNECTED -> ASSOCIATED
1232619046.380365: wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
1232619046.380368: WEXT: Operstate: linkmode=-1, operstate=5
1232619046.380377: Associated to a new BSS: BSSID=00:1a:70:94:22:4e
1232619046.380380: No keys have been configured - skip key clearing
1232619046.380384: No network configuration found for the current AP
1232619046.380386: wpa_driver_wext_disassociate
1232619046.380516: No keys have been configured - skip key clearing
1232619046.380518: State: ASSOCIATED -> DISCONNECTED
1232619046.380521: wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
1232619046.380523: WEXT: Operstate: linkmode=-1, operstate=5
1232619046.380527: EAPOL: External notification - portEnabled=0
1232619046.380530: EAPOL: External notification - portValid=0
1232619046.380534: RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
1232619046.380537: RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
1232619046.383206: RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
1232619046.383209: Wireless event: cmd=0x8b15 len=20
1232619046.383212: Wireless event: new AP: 00:00:00:00:00:00
1232619046.383215: BSSID 00:00:00:00:00:00 blacklist count incremented to 2
1232619046.383220: CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
1232619046.383222: wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
1232619046.383228: wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
1232619046.383233: wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
1232619046.383237: wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
1232619046.383242: wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
1232619046.383246: State: DISCONNECTED -> DISCONNECTED
1232619046.383248: wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
1232619046.383251: WEXT: Operstate: linkmode=-1, operstate=5
1232619046.383255: EAPOL: External notification - portEnabled=0
1232619046.383257: EAPOL: External notification - portValid=0
1232619047.392271: RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
1232619047.392276: RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
1232619048.954443: RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
1232619048.954448: Wireless event: cmd=0x8b15 len=20
1232619048.954450: Wireless event: new AP: 00:00:00:00:00:00
1232619048.954454: BSSID 00:00:00:00:00:00 blacklist count incremented to 3
1232619048.954460: CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
1232619048.954462: wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
1232619048.954469: wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
1232619048.954474: wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
1232619048.954478: wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
1232619048.954483: wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
1232619048.954487: State: DISCONNECTED -> DISCONNECTED
1232619048.954489: wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
1232619048.954522: WEXT: Operstate: linkmode=-1, operstate=5
1232619048.954528: EAPOL: External notification - portEnabled=0
1232619048.954531: EAPOL: External notification - portValid=0
1232619049.676869: RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
1232619049.676874: Wireless event: cmd=0x8b15 len=20
1232619049.676876: Wireless event: new AP: 00:1a:70:94:22:4e
1232619049.676879: State: DISCONNECTED -> ASSOCIATED
1232619049.676882: wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
1232619049.676884: WEXT: Operstate: linkmode=-1, operstate=5
1232619049.676894: Associated to a new BSS: BSSID=00:1a:70:94:22:4e
1232619049.676896: No keys have been configured - skip key clearing
1232619049.676900: No network configuration found for the current AP
1232619049.676902: wpa_driver_wext_disassociate
1232619049.677032: No keys have been configured - skip key clearing
1232619049.677034: State: ASSOCIATED -> DISCONNECTED
1232619049.677036: wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
1232619049.677039: WEXT: Operstate: linkmode=-1, operstate=5
1232619049.677043: EAPOL: External notification - portEnabled=0
1232619049.677046: EAPOL: External notification - portValid=0
1232619049.677049: RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
1232619049.677053: RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
1232619049.679789: RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
1232619049.679793: Wireless event: cmd=0x8b15 len=20
1232619049.679796: Wireless event: new AP: 00:00:00:00:00:00
1232619049.679799: BSSID 00:00:00:00:00:00 blacklist count incremented to 4
1232619049.679804: CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
1232619049.679806: wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
1232619049.679812: wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
1232619049.679817: wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
1232619049.679822: wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
1232619049.679826: wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
1232619049.679831: State: DISCONNECTED -> DISCONNECTED
1232619049.679833: wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
1232619049.679835: WEXT: Operstate: linkmode=-1, operstate=5
1232619049.679840: EAPOL: External notification - portEnabled=0
1232619049.679842: EAPOL: External notification - portValid=0
1232619050.002969: State: DISCONNECTED -> SCANNING
1232619050.002972: Starting AP scan (broadcast SSID)
1232619050.002977: Scan requested (ret=0) - scan timeout 30 seconds
1232619050.388594: RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
1232619050.388599: Wireless event: cmd=0x8b19 len=8
1232619050.388626: Received 1131 bytes of scan results (5 BSSes)
1232619050.388629: Scan results: 5
1232619050.388633: Selecting BSS from priority group 0
1232619050.388634: Try to find WPA-enabled AP
1232619050.388636: 0: ae:77:9e:95:78:80 ssid='Win2Lin' wpa_ie_len=24 rsn_ie_len=0 caps=0x12
1232619050.388642: skip WPA IE - PTK cipher mismatch
1232619050.388644: 1: 00:18:02:85:84:30 ssid='Alice-33356894' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
1232619050.388648: skip - SSID mismatch
1232619050.388650: 2: 00:11:50:7f:5d:7c ssid='Belkin54g' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
1232619050.388654: skip - no WPA/RSN IE
1232619050.388656: 3: 00:1a:70:94:22:4e ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
1232619050.388660: skip - no WPA/RSN IE
1232619050.388662: 4: 00:1e:2a:11:5b:90 ssid='NETGEAR' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
1232619050.388665: skip - no WPA/RSN IE
1232619050.388667: Try to find non-WPA AP
1232619050.388669: 0: ae:77:9e:95:78:80 ssid='Win2Lin' wpa_ie_len=24 rsn_ie_len=0 caps=0x12
1232619050.388673: skip - non-WPA network not allowed
1232619050.388675: 1: 00:18:02:85:84:30 ssid='Alice-33356894' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
1232619050.388679: skip - SSID mismatch
1232619050.388681: 2: 00:11:50:7f:5d:7c ssid='Belkin54g' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
1232619050.388700: skip - SSID mismatch
1232619050.388702: 3: 00:1a:70:94:22:4e ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
1232619050.388706: skip - SSID mismatch
1232619050.388708: 4: 00:1e:2a:11:5b:90 ssid='NETGEAR' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
1232619050.388712: skip - SSID mismatch
1232619050.388713: No APs found - clear blacklist and try again
1232619050.388715: Removed BSSID 00:00:00:00:00:00 from blacklist (clear)
1232619050.388719: Selecting BSS from priority group 0
1232619050.388721: Try to find WPA-enabled AP
1232619050.388723: 0: ae:77:9e:95:78:80 ssid='Win2Lin' wpa_ie_len=24 rsn_ie_len=0 caps=0x12
1232619050.388727: skip WPA IE - PTK cipher mismatch
1232619050.388729: 1: 00:18:02:85:84:30 ssid='Alice-33356894' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
1232619050.388733: skip - SSID mismatch
1232619050.388735: 2: 00:11:50:7f:5d:7c ssid='Belkin54g' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
1232619050.388739: skip - no WPA/RSN IE
1232619050.388741: 3: 00:1a:70:94:22:4e ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
1232619050.388744: skip - no WPA/RSN IE
1232619050.388746: 4: 00:1e:2a:11:5b:90 ssid='NETGEAR' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
1232619050.388750: skip - no WPA/RSN IE
1232619050.388752: Try to find non-WPA AP
1232619050.388753: 0: ae:77:9e:95:78:80 ssid='Win2Lin' wpa_ie_len=24 rsn_ie_len=0 caps=0x12
1232619050.388757: skip - non-WPA network not allowed
1232619050.388759: 1: 00:18:02:85:84:30 ssid='Alice-33356894' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
1232619050.388763: skip - SSID mismatch
1232619050.388765: 2: 00:11:50:7f:5d:7c ssid='Belkin54g' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
1232619050.388769: skip - SSID mismatch
1232619050.388770: 3: 00:1a:70:94:22:4e ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
1232619050.388774: skip - SSID mismatch
1232619050.388776: 4: 00:1e:2a:11:5b:90 ssid='NETGEAR' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
1232619050.388780: skip - SSID mismatch
1232619050.388782: No suitable AP found.
1232619050.388785: Setting scan request: 5 sec 0 usec
1232619050.688401: RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
1232619050.688405: RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
1232619052.033828: RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
1232619052.033838: Wireless event: cmd=0x8b15 len=20
1232619052.033841: Wireless event: new AP: 00:00:00:00:00:00
1232619052.033847: Added BSSID 00:00:00:00:00:00 into blacklist
1232619052.033853: CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
1232619052.033857: wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
1232619052.033870: wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
1232619052.033874: wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
1232619052.033879: wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
1232619052.033883: wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
1232619052.033888: State: SCANNING -> DISCONNECTED
1232619052.033892: wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
1232619052.033895: WEXT: Operstate: linkmode=-1, operstate=5
1232619052.033906: EAPOL: External notification - portEnabled=0
1232619052.033911: EAPOL: External notification - portValid=0
1232619052.766906: RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
1232619052.766911: Wireless event: cmd=0x8b15 len=20
1232619052.766913: Wireless event: new AP: 00:1a:70:94:22:4e
1232619052.766917: State: DISCONNECTED -> ASSOCIATED
1232619052.766919: wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
1232619052.766922: WEXT: Operstate: linkmode=-1, operstate=5
1232619052.766932: Associated to a new BSS: BSSID=00:1a:70:94:22:4e
1232619052.766935: No keys have been configured - skip key clearing
1232619052.766940: No network configuration found for the current AP
1232619052.766942: wpa_driver_wext_disassociate
1232619052.766951: No keys have been configured - skip key clearing
1232619052.766953: State: ASSOCIATED -> DISCONNECTED
1232619052.766963: wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
1232619052.767009: WEXT: Operstate: linkmode=-1, operstate=5
1232619052.767014: EAPOL: External notification - portEnabled=0
1232619052.767017: EAPOL: External notification - portValid=0
1232619052.767021: RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
1232619052.767025: RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
1232619055.391321: State: DISCONNECTED -> SCANNING
1232619055.391327: Starting AP scan (broadcast SSID)
1232619055.391334: Scan requested (ret=0) - scan timeout 30 seconds
1232619055.685046: RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
1232619055.685051: Wireless event: cmd=0x8b19 len=8
1232619055.685088: Received 1134 bytes of scan results (5 BSSes)
1232619055.685091: Scan results: 5
1232619055.685096: Selecting BSS from priority group 0
1232619055.685098: Try to find WPA-enabled AP
1232619055.685101: 0: ae:77:9e:95:78:80 ssid='Win2Lin' wpa_ie_len=24 rsn_ie_len=0 caps=0x12
1232619055.685107: skip WPA IE - PTK cipher mismatch
1232619055.685109: 1: 00:18:02:85:84:30 ssid='Alice-33356894' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
1232619055.685114: skip - SSID mismatch
1232619055.685116: 2: 00:11:50:7f:5d:7c ssid='Belkin54g' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
1232619055.685120: skip - no WPA/RSN IE
1232619055.685122: 3: 00:1a:70:94:22:4e ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
1232619055.685126: skip - no WPA/RSN IE
1232619055.685127: 4: 00:1e:2a:11:5b:90 ssid='NETGEAR' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
1232619055.685131: skip - no WPA/RSN IE
1232619055.685133: Try to find non-WPA AP
1232619055.685135: 0: ae:77:9e:95:78:80 ssid='Win2Lin' wpa_ie_len=24 rsn_ie_len=0 caps=0x12
1232619055.685139: skip - non-WPA network not allowed
1232619055.685141: 1: 00:18:02:85:84:30 ssid='Alice-33356894' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
1232619055.685145: skip - SSID mismatch
1232619055.685147: 2: 00:11:50:7f:5d:7c ssid='Belkin54g' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
1232619055.685151: skip - SSID mismatch
1232619055.685153: 3: 00:1a:70:94:22:4e ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
1232619055.685156: skip - SSID mismatch
1232619055.685158: 4: 00:1e:2a:11:5b:90 ssid='NETGEAR' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
1232619055.685162: skip - SSID mismatch
1232619055.685164: No APs found - clear blacklist and try again
1232619055.685166: Removed BSSID 00:00:00:00:00:00 from blacklist (clear)
1232619055.685169: Selecting BSS from priority group 0
1232619055.685171: Try to find WPA-enabled AP
1232619055.685173: 0: ae:77:9e:95:78:80 ssid='Win2Lin' wpa_ie_len=24 rsn_ie_len=0 caps=0x12
1232619055.685178: skip WPA IE - PTK cipher mismatch
1232619055.685180: 1: 00:18:02:85:84:30 ssid='Alice-33356894' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
1232619055.685183: skip - SSID mismatch
1232619055.685185: 2: 00:11:50:7f:5d:7c ssid='Belkin54g' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
1232619055.685189: skip - no WPA/RSN IE
1232619055.685191: 3: 00:1a:70:94:22:4e ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
1232619055.685195: skip - no WPA/RSN IE
1232619055.685197: 4: 00:1e:2a:11:5b:90 ssid='NETGEAR' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
1232619055.685200: skip - no WPA/RSN IE
1232619055.685202: Try to find non-WPA AP
1232619055.685204: 0: ae:77:9e:95:78:80 ssid='Win2Lin' wpa_ie_len=24 rsn_ie_len=0 caps=0x12
1232619055.685208: skip - non-WPA network not allowed
1232619055.685210: 1: 00:18:02:85:84:30 ssid='Alice-33356894' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
1232619055.685214: skip - SSID mismatch
1232619055.685215: 2: 00:11:50:7f:5d:7c ssid='Belkin54g' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
1232619055.685219: skip - SSID mismatch
1232619055.685221: 3: 00:1a:70:94:22:4e ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
1232619055.685225: skip - SSID mismatch
1232619055.685227: 4: 00:1e:2a:11:5b:90 ssid='NETGEAR' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
1232619055.685230: skip - SSID mismatch
1232619055.685232: No suitable AP found.
1232619055.685236: Setting scan request: 5 sec 0 usec
1232619060.68752-
flashman
- Linux 1.x
- Messaggi: 109
- Iscritto il: mar 16 set 2008, 17:32
- Slackware: 12.1
- Kernel: 2.6.24.5
- Desktop: fluxbox
Re: Windows pc vs Linux notebook wireless!
Perchè mi dice :
Perchè ?
Codice: Seleziona tutto
Try to find WPA-enabled AP
1232619039.938232: 0: ae:77:9e:95:78:80 ssid='Win2Lin' wpa_ie_len=24 rsn_ie_len=0 caps=0x12
1232619039.938237: skip WPA IE - PTK cipher mismatch-
NetNightmare
- Linux 1.x
- Messaggi: 175
- Iscritto il: lun 18 ago 2008, 11:00
- Nome Cognome: Giuseppe De Nicolo'
- Slackware: 13.37 x86_64
- Kernel: 2.6.37.6-smp
- Desktop: Fluxbox
- Località: Rome
Re: Windows pc vs Linux notebook wireless!
ok da quello che vedo il tuo problema potrebbe essere questo :
Presumo che "win2Lin" sia la tua SSID correggimi se sbaglio
Ti dico che il tuo box linux sembra configurato correttamente penso che il tuo problema derivi da questo "PTK cipher mismatch" il che "indicherebbe" che il tuo AP stia utilizzando il protocollo CKIP che e' un protocollo introdotto dalla cisco .... e che mi spiace dirtelo WPA_Supplicant non supporta ... potresti provare a riconfigurare con TKIP il tuo AP ?? o comunque verificare la configurazione ?
EDIT : o magari usa WEP ( lo so e' meno sicuro pero....)
Presumo che "win2Lin" sia la tua SSID correggimi se sbaglio
Ti dico che il tuo box linux sembra configurato correttamente penso che il tuo problema derivi da questo "PTK cipher mismatch" il che "indicherebbe" che il tuo AP stia utilizzando il protocollo CKIP che e' un protocollo introdotto dalla cisco .... e che mi spiace dirtelo WPA_Supplicant non supporta ... potresti provare a riconfigurare con TKIP il tuo AP ?? o comunque verificare la configurazione ?
EDIT : o magari usa WEP ( lo so e' meno sicuro pero....)
Ultima modifica di NetNightmare il gio 22 gen 2009, 11:25, modificato 1 volta in totale.
-
flashman
- Linux 1.x
- Messaggi: 109
- Iscritto il: mar 16 set 2008, 17:32
- Slackware: 12.1
- Kernel: 2.6.24.5
- Desktop: fluxbox
Re: Windows pc vs Linux notebook wireless!
ok!
Adesso verifico!
In realtà è una rete ad hoc.
In patrica ho PCwindows collegato a router tramite lan.
Chiavetta wifi su PCWindows per collegarmi con linux.
Quando installo la chiavetta windows mi dice che per rete ad ok ha solo WPA-none ma per la crittografia dati
selezione il TKIP. Quindi non capisco.
Può essere che la chiave è sbagliata ?
Per ora in windows ho messo 8 zeri. La stessa cosa in wpa_supplicant.conf.
Sarebbe il caso di fare una prova disabilitando il wpa ?
Adesso verifico!
In realtà è una rete ad hoc.
In patrica ho PCwindows collegato a router tramite lan.
Chiavetta wifi su PCWindows per collegarmi con linux.
Quando installo la chiavetta windows mi dice che per rete ad ok ha solo WPA-none ma per la crittografia dati
selezione il TKIP. Quindi non capisco.
Può essere che la chiave è sbagliata ?
Per ora in windows ho messo 8 zeri. La stessa cosa in wpa_supplicant.conf.
Sarebbe il caso di fare una prova disabilitando il wpa ?