E17 from svn is ready!

[Blallo]

Sto compilando eet, mi da questo errore sui 64bit, ma non sui 32:

Codice: Seleziona tutto

/usr/lib/libgnutls.so: could not read symbols: File in wrong format

cosa può essere?

[conraid]

Sto compilando eet, mi da questo errore sui 64bit, ma non sui 32:

Codice: Seleziona tutto

/usr/lib/libgnutls.so: could not read symbols: File in wrong format

cosa può essere?

hai specificato i corretti ldflags?
ora non ho la 64bit davanti, ma magari sono in /usr/lib64 le gnutls

[Blallo]

questi sono i flags che do

Codice: Seleziona tutto

	SLKCFLAGS="-O2 -fPIC"
	LIBDIRSUFFIX="64"

e questi i parametri che do

Codice: Seleziona tutto

	CFLAGS="$SLKCFLAGS" \
	CXXFLAGS="$SLKCFLAGS" \
	./autogen.sh \
	--prefix=/usr \
	--libdir=/usr/lib${LIBDIRSUFFIX} \
	--sysconfdir=/etc \
  	--localstatedir=/var \
  	--mandir=/usr/man \
  	--disable-static

[conraid]

prova con

Codice: Seleziona tutto

SLKLDFLAGS="-L/usr/lib64"

LDFLAGS="$SLKLDFLAGS" \
CFLAGS="$SLKCFLAGS" \
CXXFLAGS="$SLKCFLAGS" \
   ./autogen.sh \

purtroppo a volte ce n'è bisogno altre no, a volte da anche problema specificarlo, ma nella maggior parte dei casi metterlo non pregiudica la compilazione e magari risolve qualche problema

[Blallo]

conraid, che dirti...SEI UN GENIO!
se ho altri problemi con altri programmi di enlightenment uso questo thread senza aprirne altri ok?

[Blallo]

diamine...adesso ewl mi da il problema...eppure ho impostato tutto bene! se ricompilassi la libgnutls potrebbe andare?

[conraid]

diamine...adesso ewl mi da il problema...eppure ho impostato tutto bene! se ricompilassi la libgnutls potrebbe andare?

è un pacchetto della Slackware perché devi ricompilarlo?

cerchi di risolvere il problema, se vedi che è di come è stato impacchettato e/o compilato libgnutls lo segnali a Pat

[gohanz]

Come mai stai compilando a 64 bit ?

[conraid]

Come mai stai compilando a 64 bit ?

beh in effetti si era detto che dovevamo fare gli slackbuild in modo da essere compatibili con la 64bit anche se i pacchetti solo per la 32

[gohanz]

Come mai stai compilando a 64 bit ?

beh in effetti si era detto che dovevamo fare gli slackbuild in modo da essere compatibili con la 64bit anche se i pacchetti solo per la 32

Si vero, anche io sto facendo SlackBuild compatibili 64bit. Mi preoccupa il fatto che Jimmy stia compilando a 64bit.

[conraid]

Come mai stai compilando a 64 bit ?

beh in effetti si era detto che dovevamo fare gli slackbuild in modo da essere compatibili con la 64bit anche se i pacchetti solo per la 32

Si vero, anche io sto facendo SlackBuild compatibili 64bit. Mi preoccupa il fatto che Jimmy stia compilando a 64bit.

magari è per se, ma... come lo provi se non compili?

[Blallo]

allora...io sto facendo le prove su slack64 perchè è il computer più veloce di cui dispongo..appena funziona tutto lo stesso script lo testo su una 12.2 per verificare problemi sui 32 bit (dato che ho già creato il "layer" di compatibilità")
A proposito conraid lo SLKLDFLAGS="-L/usr/lib64" lo devo modificare (per i 32 bit) come SLKLDFLAGS="-L/usr/lib" ?

[Blallo]

mi preoccupa il fatto che vada su /usr/lib/libgnutls e non su /usr/lib64/libgnutls
che di problemi il pacchetto di compatibilità li libgnutls a 32?

[Blallo]

é come pensavo, non capisco perchè ma mi cerca le librerie in /usr/lib, e non in /usr/lib64, simuovendo gnutls-compat32 compila, ma mi da tanti warning che mi da incompatibili (giustamente) le librerie in /usr/lib, e ciò non va bene assai sembra non legga il --libdir=/usr/lib64

[Blallo]

Codice: Seleziona tutto

# Makefile.in generated by automake 1.10.1 from Makefile.am.
# Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.





pkgdatadir = $(datadir)/ewl
pkglibdir = $(libdir)/ewl
pkgincludedir = $(includedir)/ewl
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = x86_64-unknown-linux-gnu
host_triplet = x86_64-unknown-linux-gnu
subdir = .
DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
	$(srcdir)/Makefile.in $(srcdir)/ewl-config.h.in \
	$(srcdir)/ewl.pc.in $(srcdir)/ewl.spec.in \
	$(top_srcdir)/configure ABOUT-NLS AUTHORS COPYING ChangeLog \
	INSTALL NEWS config.guess config.rpath config.sub depcomp \
	install-sh ltmain.sh missing
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/ac_attribute.m4 \
	$(top_srcdir)/m4/ewl_check_engine.m4 \
	$(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/iconv.m4 \
	$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
	$(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/nls.m4 \
	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = ewl-config.h
CONFIG_CLEAN_FILES = ewl.spec ewl.pc
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgconfigdir)"
binSCRIPT_INSTALL = $(INSTALL_SCRIPT)
SCRIPTS = $(bin_SCRIPTS)
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-dvi-recursive install-exec-recursive \
	install-html-recursive install-info-recursive \
	install-pdf-recursive install-ps-recursive install-recursive \
	installcheck-recursive installdirs-recursive pdf-recursive \
	ps-recursive uninstall-recursive
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
pkgconfigDATA_INSTALL = $(INSTALL_DATA)
DATA = $(pkgconfig_DATA)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
  { test ! -d $(distdir) \
    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
         && rm -fr $(distdir); }; }
DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
distcleancheck_listfiles = find . -type f -print
ACLOCAL = ${SHELL} /tmp/e17/e/trunk/ewl/missing --run aclocal-1.10
ALLOCA = 
AMTAR = ${SHELL} /tmp/e17/e/trunk/ewl/missing --run tar
AM_LIBTOOLFLAGS = --tag=disable-static
AR = ar
AS = as
AUTOCONF = ${SHELL} /tmp/e17/e/trunk/ewl/missing --run autoconf
AUTOHEADER = ${SHELL} /tmp/e17/e/trunk/ewl/missing --run autoheader
AUTOMAKE = ${SHELL} /tmp/e17/e/trunk/ewl/missing --run automake-1.10
AWK = gawk
CC = gcc -std=gnu99
CCDEPMODE = depmode=gcc3
CFLAGS =  -O2 -fPIC
CPP = gcc -E
CPPFLAGS = 
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DLLTOOL = dlltool
DSYMUTIL = 
ECHO = echo
ECHO_C = 
ECHO_N = -n
ECHO_T = 
ECORE_CFLAGS = -I/usr/include/eina-0 -I/usr/include/eina-0/eina  
ECORE_EVAS_CFLAGS = -I/usr/include/eina-0 -I/usr/include/eina-0/eina  
ECORE_EVAS_LIBS = -L/usr/lib -lecore_evas -lecore_x -lecore_input -lecore_txt -levas -lecore -leina  
ECORE_FB_CFLAGS = 
ECORE_FB_LIBS = 
ECORE_INPUT_CFLAGS = -I/usr/include/eina-0 -I/usr/include/eina-0/eina  
ECORE_INPUT_LIBS = -L/usr/lib -lecore_input -levas -lecore -leina  
ECORE_LIBS = -L/usr/lib -lecore_txt -lecore_file -lecore_con -lgnutls -lcurl -lecore -leina  
ECORE_SDL_CFLAGS = 
ECORE_SDL_LIBS = 
ECORE_WIN32_CFLAGS = 
ECORE_WIN32_LIBS = 
ECORE_XCB_CFLAGS = -I/usr/include/eina-0 -I/usr/include/eina-0/eina  
ECORE_XCB_LIBS = -L/usr/lib -lxcb -lecore_x -lecore_input -lecore_txt -levas -lecore -leina  
ECORE_X_CFLAGS = -I/usr/include/eina-0 -I/usr/include/eina-0/eina  
ECORE_X_LIBS = -L/usr/lib -lecore_x -lecore_input -lecore_txt -levas -lecore -leina  
EDJE_CFLAGS = -I/usr/include/eina-0 -I/usr/include/eina-0/eina  
EDJE_LIBS = -L/usr/lib -ledje -lecore_imf_evas -llua -lm -lembryo -lecore_job -leet -lecore_imf -levas -lecore -leina  
EFREET_CFLAGS = -I/usr/include/efreet -I/usr/include/eina-0 -I/usr/include/eina-0/eina  
EFREET_LIBS = -L/usr/lib -lefreet -lefreet_mime -lecore_file -lecore_con -lgnutls -lcurl -lecore -leina  
EGREP = /bin/grep -E
EMOTION_CFLAGS = -I/usr/include/eina-0 -I/usr/include/eina-0/eina  
EMOTION_LIBS = -L/usr/lib -lemotion -levas -leina  
EPSILON_CFLAGS =  
EPSILON_LIBS = -lepsilon  
EVAS_CFLAGS = -I/usr/include/eina-0 -I/usr/include/eina-0/eina  
EVAS_LIBS = -L/usr/lib -levas -leina  
EVIL_CFLAGS = 
EVIL_LIBS = 
EXEEXT = 
GCOV_CFLAGS = 
GCOV_LIBS = 
GMSGFMT = /usr/bin/msgfmt
GMSGFMT_015 = /usr/bin/msgfmt
GREP = /bin/grep
INSTALL = /bin/ginstall -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
INTERFACE_VERSION = 1:0:0
INTLLIBS = 
INTL_MACOSX_LIBS = 
LDFLAGS = 
LIBICONV = -liconv
LIBINTL = 
LIBOBJS = 
LIBS = -lm 
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LN_S = ln -s
LTLIBICONV = -liconv
LTLIBINTL = 
LTLIBOBJS = 
MAKEINFO = ${SHELL} /tmp/e17/e/trunk/ewl/missing --run makeinfo
MKDIR_P = /bin/mkdir -p
MSGFMT = /usr/bin/msgfmt
MSGFMT_015 = /usr/bin/msgfmt
MSGMERGE = /usr/bin/msgmerge
NMEDIT = 
OBJDUMP = objdump
OBJEXT = o
PACKAGE = ewl
PACKAGE_BUGREPORT = enlightenment-devel@lists.sourceforge.net
PACKAGE_NAME = ewl
PACKAGE_STRING = ewl 0.5.3.050
PACKAGE_TARNAME = ewl
PACKAGE_VERSION = 0.5.3.050
PATH_SEPARATOR = :
PKG_CONFIG = /usr/bin/pkg-config
POSUB = po
RANLIB = ranlib
SED = /bin/sed
SET_MAKE = 
SHELL = /bin/sh
STRIP = strip
USE_NLS = yes
VERSION = 0.5.3.050
WIN32_CFLAGS = 
XGETTEXT = /usr/bin/xgettext
XGETTEXT_015 = /usr/bin/xgettext
abs_builddir = /tmp/e17/e/trunk/ewl
abs_srcdir = /tmp/e17/e/trunk/ewl
abs_top_builddir = /tmp/e17/e/trunk/ewl
abs_top_srcdir = /tmp/e17/e/trunk/ewl
ac_ct_CC = gcc
am__include = include
am__leading_dot = .
am__quote = 
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = ${exec_prefix}/bin
build = x86_64-unknown-linux-gnu
build_alias = 
build_cpu = x86_64
build_os = linux-gnu
build_vendor = unknown
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
ewl_evas_engine_default = evas_software_xlib
ewl_media_include = #include <ewl_media.h>
exec_prefix = ${prefix}
fnmatch_libs = 
have_lcov = 
host = x86_64-unknown-linux-gnu
host_alias = 
host_cpu = x86_64
host_os = linux-gnu
host_vendor = unknown
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = $(SHELL) /tmp/e17/e/trunk/ewl/install-sh
libdir = /usr/lib64
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localstatedir = /var
lt_enable_auto_import = 
lt_no_undefined = 
mandir = /usr/man
mkdir_p = /bin/mkdir -p
oldincludedir = /usr/include
pdfdir = ${docdir}
prefix = /usr
program_transform_name = s,x,x,
psdir = ${docdir}
requirements = evas ecore edje emotion efreet epsilon
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = .
sysconfdir = /etc
target_alias = 
top_build_prefix = 
top_builddir = .
top_srcdir = .
ACLOCAL_AMFLAGS = -I m4
SUBDIRS = src data tools doc po
MAINTAINERCLEANFILES = Makefile.in aclocal.m4 config.guess \
		   config.h.in config.sub configure install-sh \
		   ltconfig ltmain.sh missing mkinstalldirs \
		   stamp-h.in

bin_SCRIPTS = 
EXTRA_DIST = README AUTHORS COPYING ewl.spec ewl.pc.in
pkgconfigdir = $(libdir)/pkgconfig
pkgconfig_DATA = ewl.pc
all: ewl-config.h
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

.SUFFIXES:
am--refresh:
	@:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
	      cd $(srcdir) && $(AUTOMAKE) --gnu  \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)

ewl-config.h: stamp-h1
	@if test ! -f $@; then \
	  rm -f stamp-h1; \
	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
	else :; fi

stamp-h1: $(srcdir)/ewl-config.h.in $(top_builddir)/config.status
	@rm -f stamp-h1
	cd $(top_builddir) && $(SHELL) ./config.status ewl-config.h
$(srcdir)/ewl-config.h.in:  $(am__configure_deps) 
	cd $(top_srcdir) && $(AUTOHEADER)
	rm -f stamp-h1
	touch $@

distclean-hdr:
	-rm -f ewl-config.h stamp-h1
ewl.spec: $(top_builddir)/config.status $(srcdir)/ewl.spec.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
ewl.pc: $(top_builddir)/config.status $(srcdir)/ewl.pc.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
install-binSCRIPTS: $(bin_SCRIPTS)
	@$(NORMAL_INSTALL)
	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
	@list='$(bin_SCRIPTS)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  if test -f $$d$$p; then \
	    f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
	    echo " $(binSCRIPT_INSTALL) '$$d$$p' '$(DESTDIR)$(bindir)/$$f'"; \
	    $(binSCRIPT_INSTALL) "$$d$$p" "$(DESTDIR)$(bindir)/$$f"; \
	  else :; fi; \
	done

uninstall-binSCRIPTS:
	@$(NORMAL_UNINSTALL)
	@list='$(bin_SCRIPTS)'; for p in $$list; do \
	  f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
	  echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
	  rm -f "$(DESTDIR)$(bindir)/$$f"; \
	done

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool
install-pkgconfigDATA: $(pkgconfig_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
	@list='$(pkgconfig_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
	  $(pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \
	done

uninstall-pkgconfigDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(pkgconfig_DATA)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \
	done

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

$(RECURSIVE_CLEAN_TARGETS):
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES) ewl-config.h.in $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS) ewl-config.h.in $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	    $$tags $$unique; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) ewl-config.h.in $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	list='$(SOURCES) $(HEADERS) ewl-config.h.in $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	test -z "$(CTAGS_ARGS)$$tags$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	$(am__remove_distdir)
	test -d $(distdir) || mkdir $(distdir)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || $(MKDIR_P) "$(distdir)/$$subdir" \
	    || exit 1; \
	    distdir=`$(am__cd) $(distdir) && pwd`; \
	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
	    (cd $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$top_distdir" \
	        distdir="$$distdir/$$subdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
	|| chmod -R a+r $(distdir)
dist-gzip: distdir
	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	$(am__remove_distdir)
dist-bzip2: distdir
	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
	$(am__remove_distdir)

dist-lzma: distdir
	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
	$(am__remove_distdir)

dist-tarZ: distdir
	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
	$(am__remove_distdir)

dist-shar: distdir
	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
	$(am__remove_distdir)

dist-zip: distdir
	-rm -f $(distdir).zip
	zip -rq $(distdir).zip $(distdir)
	$(am__remove_distdir)

dist dist-all: distdir
	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
	$(am__remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	case '$(DIST_ARCHIVES)' in \
	*.tar.gz*) \
	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
	*.tar.bz2*) \
	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
	*.tar.lzma*) \
	  unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
	*.tar.Z*) \
	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
	*.shar.gz*) \
	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
	*.zip*) \
	  unzip $(distdir).zip ;;\
	esac
	chmod -R a-w $(distdir); chmod a+w $(distdir)
	mkdir $(distdir)/_build
	mkdir $(distdir)/_inst
	chmod a-w $(distdir)
	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
	  && cd $(distdir)/_build \
	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
	    $(DISTCHECK_CONFIGURE_FLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
	        distuninstallcheck \
	  && chmod -R a-w "$$dc_install_base" \
	  && ({ \
	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
	  && rm -rf "$$dc_destdir" \
	  && $(MAKE) $(AM_MAKEFLAGS) dist \
	  && rm -rf $(DIST_ARCHIVES) \
	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
	$(am__remove_distdir)
	@(echo "$(distdir) archives ready for distribution: "; \
	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
	@cd $(distuninstallcheck_dir) \
	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
	   || { echo "ERROR: files left after uninstall:" ; \
	        if test -n "$(DESTDIR)"; then \
	          echo "  (check DESTDIR support)"; \
	        fi ; \
	        $(distuninstallcheck_listfiles) ; \
	        exit 1; } >&2
distcleancheck: distclean
	@if test '$(srcdir)' = . ; then \
	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
	  exit 1 ; \
	fi
	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
	  || { echo "ERROR: files left in build directory after distclean:" ; \
	       $(distcleancheck_listfiles) ; \
	       exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile $(SCRIPTS) $(DATA) ewl-config.h
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgconfigdir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean-local:
clean: clean-recursive

clean-am: clean-generic clean-libtool clean-local mostlyclean-am

distclean: distclean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-hdr \
	distclean-libtool distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

info: info-recursive

info-am:

install-data-am: install-pkgconfigDATA

install-dvi: install-dvi-recursive

install-exec-am: install-binSCRIPTS

install-html: install-html-recursive

install-info: install-info-recursive

install-man:

install-pdf: install-pdf-recursive

install-ps: install-ps-recursive

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(top_srcdir)/autom4te.cache
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-binSCRIPTS uninstall-pkgconfigDATA

.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
	install-strip

.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
	all all-am am--refresh check check-am clean clean-generic \
	clean-libtool clean-local ctags ctags-recursive dist dist-all \
	dist-bzip2 dist-gzip dist-lzma dist-shar dist-tarZ dist-zip \
	distcheck distclean distclean-generic distclean-hdr \
	distclean-libtool distclean-tags distcleancheck distdir \
	distuninstallcheck dvi dvi-am html html-am info info-am \
	install install-am install-binSCRIPTS install-data \
	install-data-am install-dvi install-dvi-am install-exec \
	install-exec-am install-html install-html-am install-info \
	install-info-am install-man install-pdf install-pdf-am \
	install-pkgconfigDATA install-ps install-ps-am install-strip \
	installcheck installcheck-am installdirs installdirs-am \
	maintainer-clean maintainer-clean-generic mostlyclean \
	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
	tags tags-recursive uninstall uninstall-am \
	uninstall-binSCRIPTS uninstall-pkgconfigDATA


#lcov-reset:
#	@rm -rf lcov
#	@find . -name "*.gcda" -exec rm {} \;
#	@lcov --directory . --zerocounters

#lcov-report:
#	@mkdir lcov
#	@lcov --compat-libtool --directory . --capture --output-file lcov/lcov.info
#	@lcov -l lcov/lcov.info | grep -v "`cd $(top_srcdir) && pwd`" | cut -d: -f1 > lcov/remove
#	@lcov -r lcov/lcov.info `cat lcov/remove` > lcov/lcov.cleaned.info
#	@rm lcov/remove
#	@mv lcov/lcov.cleaned.info lcov/lcov.info
#	@genhtml -t "$(PACKAGE_STRING)" -o lcov lcov/lcov.info

#lcov:
#	@make lcov-reset
#	@if test "x$(EWL_UNIT_TEST)" = "x" ; then \
#	  ewl_test -unit -all; \
#	else \
#	  ewl_test -unit $(EWL_UNIT_TEST); \
#	fi
#	@make lcov-report

#clean-local:
#	@rm -rf lcov
lcov-reset:
	@echo "reconfigure with --enable-gcov"

lcov-report:
	@echo "reconfigure with --enable-gcov"

lcov:
	@echo "reconfigure with --enable-gcov"
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:

questo è il Makefile
ho notato che alcune righe hanno /usr/lib e non /usr/lib64, e per ogni Makefile di tutto il sorgente...sarà un problema del ./configure