Problema Swaret

[nio74]

Ho installato il pacchetto swaret e provato ad aggiornarlo ma nn si aggiorna



root@alice:/home/nio74# swaret --update
swaret 1.6.3-2

[ ftp://ftp.nluug.nl/pub/os/Linux/distr/s ... kware-10.2 ]
### Fetching CHECKSUMS List File... FAILED!
### Fetching FILELIST List File... FAILED!
### Fetching PACKAGES List File for Packages... FAILED!
### Fetching PACKAGES List File for Extra Packages... FAILED!
### Fetching PACKAGES List File for Patches... FAILED!
### Fetching ChangeLog... FAILED!
[ http://sunsite.cnlab-switch.ch/ftp/mirr ... kware-10.2 ]
### Fetching CHECKSUMS List File... FAILED!
### Fetching FILELIST List File... FAILED!
### Fetching PACKAGES List File for Packages... FAILED!
### Fetching PACKAGES List File for Extra Packages... FAILED!
### Fetching PACKAGES List File for Patches... FAILED!
### Fetching ChangeLog... FAILED!
[ ftp://ftp.slackware.no/pub/linux/slackw ... kware-10.2 ]
### Fetching CHECKSUMS List File... FAILED!
### Fetching FILELIST List File... FAILED!
### Fetching PACKAGES List File for Packages... FAILED!
### Fetching PACKAGES List File for Extra Packages... FAILED!
### Fetching PACKAGES List File for Patches... FAILED!
### Fetching ChangeLog... FAILED!
[ http://www.slackware.no/slackware/slackware-10.2 ]
### Fetching CHECKSUMS List File... FAILED!
### Fetching FILELIST List File... FAILED!
### Fetching PACKAGES List File for Packages... FAILED!
### Fetching PACKAGES List File for Extra Packages... FAILED!
### Fetching PACKAGES List File for Patches... FAILED!
### Fetching ChangeLog... FAILED!
[ ftp://ftp.slackware.at/slackware-10.2 ]
### Fetching CHECKSUMS List File... FAILED!
### Fetching FILELIST List File... FAILED!
### Fetching PACKAGES List File for Packages... FAILED!
### Fetching PACKAGES List File for Extra Packages... FAILED!
### Fetching PACKAGES List File for Patches... FAILED!
### Fetching ChangeLog... FAILED!
[ http://www.slackware.at/data/slackware-10.2 ]
### Fetching CHECKSUMS List File... FAILED!
### Fetching FILELIST List File... FAILED!
### Fetching PACKAGES List File for Packages... FAILED!
### Fetching PACKAGES List File for Extra Packages... FAILED!
### Fetching PACKAGES List File for Patches... FAILED!
### Fetching ChangeLog... FAILED!
[ ftp://ftp.planetmirror.com/pub/slackware/slackware-10.2 ]
### Fetching CHECKSUMS List File... FAILED!
### Fetching FILELIST List File... FAILED!
### Fetching PACKAGES List File for Packages... FAILED!
### Fetching PACKAGES List File for Extra Packages... FAILED!
### Fetching PACKAGES List File for Patches... FAILED!
### Fetching ChangeLog... FAILED!
[ http://ftp.planetmirror.com/pub/slackwa ... kware-10.2 ]
### Fetching CHECKSUMS List File... FAILED!
### Fetching FILELIST List File... FAILED!
### Fetching PACKAGES List File for Packages... FAILED!
### Fetching PACKAGES List File for Extra Packages... FAILED!
### Fetching PACKAGES List File for Patches... FAILED!
### Fetching ChangeLog... FAILED!
[ http://www.slacky.it/download-10.2 ]
### Fetching CHECKSUMS List File... FAILED!
### Fetching FILELIST List File... FAILED!
### Fetching PACKAGES List File for Packages... FAILED!
### Fetching PACKAGES List File for Extra Packages... FAILED!
### Fetching PACKAGES List File for Patches... FAILED!
### Fetching ChangeLog... FAILED!

root@alice:/home/nio74#


IL file Swaret.config

###########################################################
#
# swaret.conf, Version: 1.6.3
#
### /etc/swaret.conf - SWARET EXAMPLE CONFIGURATION FILE ###
#
# Define a valid Slackware Linux Version.
# (Used for Dependency Support and other Features)
#
# NOTE: If you want to use Slackware Linux Current,
# set VERSION to 'current' (VERSION=current).
#
VERSION=10.2

#
# Define the language for status and error messages
LANGUAGE=ENGLISH
#
# ----------------------------------------------------------
# Define Slackware (8.1 or Higher or Current) Linux Mirrors.
# (Used for Official Slackware Linux Packages)
# (Slackware Linux Mirrors available at http://www.slackware.com)
#
# Syntax: ROOT=PROTOCOL:URL
#
# NOTE: swaret will use the order of the specified ROOT URL's.
#
#ROOT=file:/mnt/cdrom
#ROOT=file:/mnt/dvdrom
#ROOT=file:/mnt/usbmemstick
ROOT=ftp://ftp.nluug.nl/pub/os/Linux/distr/s ... e-$VERSION
ROOT=http://sunsite.cnlab-switch.ch/ftp/mirr ... e-$VERSION
ROOT=ftp://ftp.slackware.no/pub/linux/slackw ... e-$VERSION
ROOT=http://www.slackware.no/slackware/slackware-$VERSION
ROOT=ftp://ftp.slackware.at/slackware-$VERSION
ROOT=http://www.slackware.at/data/slackware-$VERSION
ROOT=ftp://ftp.planetmirror.com/pub/slackwar ... e-$VERSION
ROOT=http://ftp.planetmirror.com/pub/slackwa ... e-$VERSION
ROOT=http://www.slacky.it/download-$VERSION
#ROOT=rsync://rsync.slackware.no/slackware/slackware-$VERSION
#ROOT=rsync://rsync.slackware.at/slackware/slackware-$VERSION
#ROOT=file:/pub/slackware
#ROOT=file:/mnt/nfsshare/slackware
#ROOT=file:/mnt/sambashare/slackware
#
# -----------------------------------------------------------
# Define Repository URL's with Slackware Linux Packages.
# (Used for Repository Slackware Linux Packages)
# (Repository URL's available at http://swaret.sourceforge.net and
# at http://www.linuxpackages.net/mirrors.php)
#
# NOTE 1: To use a Local Repository or Remote Repository,
# be sure it contains the following Files:
# - CHECKSUMS.md5 (For MD5 Sum, REQUIRED)
# - FILELIST.TXT (For Package Name + Size, REQUIRED)
# - PACKAGES.TXT (For Package Description, NOT REQUIRED)
# - MANIFEST.bz2 (For Dependency Support, NOT REQUIRED)
# NOTE 2: To create your own Repository, use 'swaret-tools'.
# You can get 'swaret-tools' at http://swaret.sourceforge.net!
#
# Syntax: REPOS_ROOT=REPOSITORYNAME%PROTOCOL:URL
#
# NOTE 1: The REPOSITORY NAME can only be ONE Keyword!
# NOTE 2: swaret will use the order of the specified REPOS_ROOT URL's.
#
#REPOS_ROOT=LinuxPackagesDOTNET%http://www2.linuxpackages.net/packages/Slackware-10.0
#
#REPOS_ROOT=My_Slackware_Packages_On_CD-ROM%file:/mnt/cdrom
#REPOS_ROOT=My_Slackware_Packages_On_DVD-ROM%file:/mnt/dvdrom
#REPOS_ROOT=My_Slackware_Packages_On_USB_Memory_Stick%file:/mnt/usbmemstick
#REPOS_ROOT=SomeRemoteRepository%ftp://ftp.someremoterepository.net/slac ... kware-10.0
#REPOS_ROOT=SomeRemoteRepository%http://www.someremoterepository.net/sla ... kware-10.0
#REPOS_ROOT=SomeRemoteRepository%rsync://rsync.someremoterepository.net/slackware/slackware-10.0
#
# ------------------------------------------------------------
# Define Libraries (8.1 or Higher or Current) List Mirrors.
# (Used for Dependency Support)
#
# NOTE 1: You need to specify a Libraries List Mirror which
# contains a 'libraries-VERSION' File.
#
# NOTE 2: To create the Libraries List, use 'swaret-tools'.
# You can get 'swaret-tools' at http://swaret.sourceforge.net!
# You can also clear all DEP_ROOT Variable(s) which will
# allow swaret to create the Libraries List for you
# during Dependency Check using the defined ROOT Variable(s) above.
#
# Syntax: DEP_ROOT=PROTOCOL:URL
#
# NOTE: swaret will use the order of the specified DEP_ROOT URL's.
#
DEP_ROOT=http://swaret.sourceforge.net
#DEP_ROOT=file:/mnt/cdrom
#DEP_ROOT=file:/mnt/dvdrom
#DEP_ROOT=file:/mnt/usbmemstick
#DEP_ROOT=file:/pub/swaret
#DEP_ROOT=file:/mnt/nfsshare/swaret
#DEP_ROOT=file:/mnt/sambashare/swaret
#
# ----------------------------------------------------------
# General Settings
#
# Do you want swaret to use Random Slackware Linux Mirrors?
# -> 1 for yes, 0 for no.
#
RANDOMR=0
#
# Do you want swaret to back-up your packages when upgradeing?
# -> If set to 1, old packages are backed up in $CACH_DIR/rollback.
# Normally this is /var/swaret/rollback. ROLLBACKMAX is the number
# of "upgrades" that will be backed up before old backups will be
# removed. Turning on rollback means upgrading packages takes
# longer, but it is more safe.
# -> If set to 0, swaret will not back up packages.
#
ROLLBACK=0
ROLLBACKMAX=3
#
# Do you want swaret to parse all the Package Descriptions?
# -> If set to 1, swaret will also match Packages whose Description
# is matching the Keyword(s) you specify after --ACTION.
# NOTE: swaret will parse all the Package Descriptions for this,
# and might slow down swaret when using an older System.
# -> If set to 0, swaret will not use Package Descriptions
# to match one or more Packages.
#
USEPKGDESC=0
#
# If you don't want swaret to Upgrade, Install, Re-Install, Download,...
# some Packages, add the KEYWORDS to the EXCLUDE Variable.
# To disable Exclude Method: swaret --exclude -off
# To enable Exclude Method: swaret --exclude -on
#
# NOTE: You can add ANY EXTENDED REGEXP (Regular Expression) to the EXCLUDE Variable(s)
#
# Basic Exclude
EXCLUDE=kernel alsa lilo
EXCLUDE=swaret
EXCLUDE=aaa_
EXCLUDE=MANIFEST.bz2$
EXCLUDE=.*dl$ .*PACKAGER$ .*MYBUILD$
#
# Advanced Exclude
# Syntax: KEYWORD[DONT_EXCLUDE_ME_KEYWORD1,DONT_EXCLUDE_ME_KEYWORD2,...]
# Example: kde-i18n[nl,en_GB] koffice-i18n[nl,en_GB]
#
#EXCLUDE=kde-i18n[nl,en_GB] koffice-i18n[nl,en_GB]
#
# Do you want to enable Dependency Check?
# -> If set to 1, swaret will start the Dependency Check after
# every Upgrade, Install and Re-Install Procedure.
# -> If set to 0, swaret will not start the Dependency Check
# after any Procedure.
#
DEPENDENCY=1
#
# Do you want swaret to Search for missing Libraries (and Fix)
# which could be found on your System, but not tracked by ldconfig?
# -> 1 for yes, 0 for no.
#
DSEARCHLIB=1
#
# Set to 1, if you want swaret to use the 'slocate' program
# to Search for missing Libraries.
# (be sure to issue the 'updatedb' Command regularly!)
# If DSEARCHM is set to 0, swaret will use
# the 'find' program to locate missing Libraries.
# -> 1 for yes, 0 for no.
#
DSEARCHM=0
#
# Start MD5 Check after Fetching Packages, Patches and Sources?
# -> 1 for yes, 0 for no.
#
MD5CHECK=1
#
# Start GPG Signature Check after Fetching Packages, Patches and Sources?
#
# NOTE: Check out F.A.Q. (--faq gpg) how to Import a Public GPG Key which
# will be used by the GPG Signature Check.
#
# -> 1 for yes, 0 for no.
#
GPGCHECK=0
#
# Show Description for Packages during
# Upgrade, Install, Re-Install,... Procedures?
# -> If set to 0, you will not see a Description.
# -> If set to 1, you will see a Description.
#
DESC=0
#
# Cache Directory for (Repository) Packages and Sources.
#
CACHE_DIR=/var/swaret
#
# Enable Logging?
# -> 1 for yes, 0 for no.
#
LOG=1
#
# swaret Log File
#
LOG_FILE=/var/log/swaret
#
# Show Warnings?
# -> 1 for yes, 0 for no.
#
WARNINGS=1
#
# Show Information?
# -> 1 for yes, 0 for no.
#
INFORMATION=1
#
# -------------------------------------------------------------
# Network Settings
#
# Network Interface
# Use this if you have a Network Interface.
#
NIC=eth0
#
# Local Interface
# Use this if you do not have a Network Interface.
#
# For Example (CD-ROM):
# You got a Slackware Linux CD-ROM,
# mount the CD-ROM to /mnt/cdrom and
# set ROOT to 'file:/mnt/cdrom' in /etc/swaret.conf.
# Also, set NIC to 'lo' (Local Loop Device).
#
# NIC=lo
#
# Progress
# If set to 0, swaret will use the '%' Download Interface.
# If set to 1, swaret will use the 'size' Download Interface.
# If set to 2, swaret will use the 'wget/rsync' Download Interface.
#
PROGRESS=0
#
# Timeout for wget and/or rsync.
# -> Number of seconds for Timeout
#
TIMEOUT=35
#
# Retries for wget and/or rsync.
# -> Number of Retries
#
RETRIES=5
#
# Behind a Firewall? Using FTP Mirrors?
# -> 1 for yes, 0 for no
#
PASSIVE_FTP=1
#
# If you want HTTP or FTP Proxy Support,
# uncomment and Setup the following Variable:
#
# WGET_PROXY=http://IP or HOST:PORT
#
# If you want RSYNC Proxy Support,
# uncomment and Setup the following Variable:
#
# RSYNC_PROXY=IP or HOST:PORT
#
### /etc/swaret.conf - SWARET EXAMPLE CONFIGURATION FILE ###

[l1q1d]

Attraverso cosa ti colleghi?

[simplex]

1) search.
2) slackware for dummies.
3) man swaret;
4) swaret non si aggiorna tramite swaret, ma manualmente.
Con

Codice: Seleziona tutto

swaret -update

scarichi la definizione dei pacchetti, mentre con

Codice: Seleziona tutto

swaret -upgrade

aggiorni tutta la distro alla 10.2

[gnubit]

Prova con la mia config, occhio che è per current

###########################################################
#
# swaret.conf, Version: 1.6.3
#
### /etc/swaret.conf - SWARET EXAMPLE CONFIGURATION FILE ###
#
# Define a valid Slackware Linux Version.
# (Used for Dependency Support and other Features)
#
# NOTE: If you want to use Slackware Linux Current,
# set VERSION to 'current' (VERSION=current).
#
VERSION=current
#
# Define the language for status and error messages
LANGUAGE=ITALIANO
#
# ----------------------------------------------------------
# Define Slackware (8.1 or Higher or Current) Linux Mirrors.
# (Used for Official Slackware Linux Packages)
# (Slackware Linux Mirrors available at http://www.slackware.com)
#
# Syntax: ROOT=PROTOCOL:URL
#
# NOTE: swaret will use the order of the specified ROOT URL's.
#
#ROOT=file:/mnt/cdrom
#ROOT=file:/mnt/dvdrom
#ROOT=file:/mnt/usbmemstick
#ROOT=ftp://ftp.nluug.nl/pub/os/Linux/distr/s ... e-$VERSION
#ROOT=http://sunsite.cnlab-switch.ch/ftp/mirr ... e-$VERSION
#ROOT=ftp://ftp.slackware.no/pub/linux/slackw ... e-$VERSION
#ROOT=http://www.slackware.no/slackware/slackware-$VERSION
#ROOT=ftp://ftp.slackware.at/slackware-$VERSION
ROOT=http://www.slackware.at/data/slackware-$VERSION
#ROOT=ftp://ftp.planetmirror.com/pub/slackwar ... e-$VERSION
#ROOT=http://ftp.planetmirror.com/pub/slackwa ... e-$VERSION
#ROOT=rsync://rsync.slackware.no/slackware/slackware-$VERSION
#ROOT=rsync://rsync.slackware.at/slackware/slackware-$VERSION
#ROOT=file:/pub/slackware
#ROOT=file:/mnt/nfsshare/slackware
#ROOT=file:/mnt/sambashare/slackware
#
# -----------------------------------------------------------
# Define Repository URL's with Slackware Linux Packages.
# (Used for Repository Slackware Linux Packages)
# (Repository URL's available at http://swaret.sourceforge.net and
# at http://www.linuxpackages.net/mirrors.php)
#
# NOTE 1: To use a Local Repository or Remote Repository,
# be sure it contains the following Files:
# - CHECKSUMS.md5 (For MD5 Sum, REQUIRED)
# - FILELIST.TXT (For Package Name + Size, REQUIRED)
# - PACKAGES.TXT (For Package Description, NOT REQUIRED)
# - MANIFEST.bz2 (For Dependency Support, NOT REQUIRED)
# NOTE 2: To create your own Repository, use 'swaret-tools'.
# You can get 'swaret-tools' at http://swaret.sourceforge.net!
#
# Syntax: REPOS_ROOT=REPOSITORYNAME%PROTOCOL:URL
#
# NOTE 1: The REPOSITORY NAME can only be ONE Keyword!
# NOTE 2: swaret will use the order of the specified REPOS_ROOT URL's.
#
REPOS_ROOT=LinuxPackagesDOTNET%http://www2.linuxpackages.net/packages/Slackware-10.2
REPOS_ROOT=Slacky.it%http://www.slacky.it/download
#
#REPOS_ROOT=My_Slackware_Packages_On_CD-ROM%file:/mnt/cdrom
#REPOS_ROOT=My_Slackware_Packages_On_DVD-ROM%file:/mnt/dvdrom
#REPOS_ROOT=My_Slackware_Packages_On_USB_Memory_Stick%file:/mnt/usbmemstick
#REPOS_ROOT=SomeRemoteRepository%ftp://ftp.someremoterepository.net/slac ... kware-10.0
#REPOS_ROOT=SomeRemoteRepository%http://www.someremoterepository.net/sla ... kware-10.0
#REPOS_ROOT=SomeRemoteRepository%rsync://rsync.someremoterepository.net/slackware/slackware-10.0
#
# ------------------------------------------------------------
# Define Libraries (8.1 or Higher or Current) List Mirrors.
# (Used for Dependency Support)
#
# NOTE 1: You need to specify a Libraries List Mirror which
# contains a 'libraries-VERSION' File.
#
# NOTE 2: To create the Libraries List, use 'swaret-tools'.
# You can get 'swaret-tools' at http://swaret.sourceforge.net!
# You can also clear all DEP_ROOT Variable(s) which will
# allow swaret to create the Libraries List for you
# during Dependency Check using the defined ROOT Variable(s) above.
#
# Syntax: DEP_ROOT=PROTOCOL:URL
#
# NOTE: swaret will use the order of the specified DEP_ROOT URL's.
#
DEP_ROOT=http://swaret.sourceforge.net
#DEP_ROOT=file:/mnt/cdrom
#DEP_ROOT=file:/mnt/dvdrom
#DEP_ROOT=file:/mnt/usbmemstick
#DEP_ROOT=file:/pub/swaret
#DEP_ROOT=file:/mnt/nfsshare/swaret
#DEP_ROOT=file:/mnt/sambashare/swaret
#
# ----------------------------------------------------------
# General Settings
#
# Do you want swaret to use Random Slackware Linux Mirrors?
# -> 1 for yes, 0 for no.
#
RANDOMR=0
#
# Do you want swaret to back-up your packages when upgradeing?
# -> If set to 1, old packages are backed up in $CACH_DIR/rollback.
# Normally this is /var/swaret/rollback. ROLLBACKMAX is the number
# of "upgrades" that will be backed up before old backups will be
# removed. Turning on rollback means upgrading packages takes
# longer, but it is more safe.
# -> If set to 0, swaret will not back up packages.
#
ROLLBACK=0
ROLLBACKMAX=3
#
# Do you want swaret to parse all the Package Descriptions?
# -> If set to 1, swaret will also match Packages whose Description
# is matching the Keyword(s) you specify after --ACTION.
# NOTE: swaret will parse all the Package Descriptions for this,
# and might slow down swaret when using an older System.
# -> If set to 0, swaret will not use Package Descriptions
# to match one or more Packages.
#
USEPKGDESC=0
#
# If you don't want swaret to Upgrade, Install, Re-Install, Download,...
# some Packages, add the KEYWORDS to the EXCLUDE Variable.
# To disable Exclude Method: swaret --exclude -off
# To enable Exclude Method: swaret --exclude -on
#
# NOTE: You can add ANY EXTENDED REGEXP (Regular Expression) to the EXCLUDE Variable(s)
#
# Basic Exclude
EXCLUDE=kernel alsa lilo
EXCLUDE=swaret
EXCLUDE=aaa_
EXCLUDE=MANIFEST.bz2$
EXCLUDE=.*dl$ .*PACKAGER$ .*MYBUILD$
EXCLUDE=x86_64
#
# Advanced Exclude
# Syntax: KEYWORD[DONT_EXCLUDE_ME_KEYWORD1,DONT_EXCLUDE_ME_KEYWORD2,...]
# Example: kde-i18n[nl,en_GB] koffice-i18n[nl,en_GB]
#
EXCLUDE=kde-i18n[it] koffice-i18n[it]
#
# Do you want to enable Dependency Check?
# -> If set to 1, swaret will start the Dependency Check after
# every Upgrade, Install and Re-Install Procedure.
# -> If set to 0, swaret will not start the Dependency Check
# after any Procedure.
#
DEPENDENCY=1
#
# Do you want swaret to Search for missing Libraries (and Fix)
# which could be found on your System, but not tracked by ldconfig?
# -> 1 for yes, 0 for no.
#
DSEARCHLIB=1
#
# Set to 1, if you want swaret to use the 'slocate' program
# to Search for missing Libraries.
# (be sure to issue the 'updatedb' Command regularly!)
# If DSEARCHM is set to 0, swaret will use
# the 'find' program to locate missing Libraries.
# -> 1 for yes, 0 for no.
#
DSEARCHM=1
#
# Start MD5 Check after Fetching Packages, Patches and Sources?
# -> 1 for yes, 0 for no.
#
MD5CHECK=1
#
# Start GPG Signature Check after Fetching Packages, Patches and Sources?
#
# NOTE: Check out F.A.Q. (--faq gpg) how to Import a Public GPG Key which
# will be used by the GPG Signature Check.
#
# -> 1 for yes, 0 for no.
#
GPGCHECK=0
#
# Show Description for Packages during
# Upgrade, Install, Re-Install,... Procedures?
# -> If set to 0, you will not see a Description.
# -> If set to 1, you will see a Description.
#
DESC=0
#
# Cache Directory for (Repository) Packages and Sources.
#
CACHE_DIR=/var/swaret
#
# Enable Logging?
# -> 1 for yes, 0 for no.
#
LOG=1
#
# swaret Log File
#
LOG_FILE=/var/log/swaret
#
# Show Warnings?
# -> 1 for yes, 0 for no.
#
WARNINGS=1
#
# Show Information?
# -> 1 for yes, 0 for no.
#
INFORMATION=1
#
# -------------------------------------------------------------
# Network Settings
#
# Network Interface
# Use this if you have a Network Interface.
#
NIC=eth0
#
# Local Interface
# Use this if you do not have a Network Interface.
#
# For Example (CD-ROM):
# You got a Slackware Linux CD-ROM,
# mount the CD-ROM to /mnt/cdrom and
# set ROOT to 'file:/mnt/cdrom' in /etc/swaret.conf.
# Also, set NIC to 'lo' (Local Loop Device).
#
# NIC=lo
#
# Progress
# If set to 0, swaret will use the '%' Download Interface.
# If set to 1, swaret will use the 'size' Download Interface.
# If set to 2, swaret will use the 'wget/rsync' Download Interface.
#
PROGRESS=0
#
# Timeout for wget and/or rsync.
# -> Number of seconds for Timeout
#
TIMEOUT=35
#
# Retries for wget and/or rsync.
# -> Number of Retries
#
RETRIES=5
#
# Behind a Firewall? Using FTP Mirrors?
# -> 1 for yes, 0 for no
#
PASSIVE_FTP=1
#
# If you want HTTP or FTP Proxy Support,
# uncomment and Setup the following Variable:
#
# WGET_PROXY=http://IP or HOST:PORT
#
# If you want RSYNC Proxy Support,
# uncomment and Setup the following Variable:
#
# RSYNC_PROXY=IP or HOST:PORT
#
### /etc/swaret.conf - SWARET EXAMPLE CONFIGURATION FILE ###

[SeNsEi_SaMe]

# Network Settings
#
# Network Interface
# Use this if you have a Network Interface.
#
NIC=eth0
sicuro che la tua scheda sia eth0???
a me dava errori anche perchè ho la wireless e la riconosce come eth1!

[nio74]

Prova con la mia config, occhio che è per current

###########################################################
#
# swaret.conf, Version: 1.6.3
#
### /etc/swaret.conf - SWARET EXAMPLE CONFIGURATION FILE ###
#
# Define a valid Slackware Linux Version.
# (Used for Dependency Support and other Features)
#
# NOTE: If you want to use Slackware Linux Current,
# set VERSION to 'current' (VERSION=current).
#
VERSION=current
#
# Define the language for status and error messages
LANGUAGE=ITALIANO
#
# ----------------------------------------------------------
# Define Slackware (8.1 or Higher or Current) Linux Mirrors.
# (Used for Official Slackware Linux Packages)
# (Slackware Linux Mirrors available at http://www.slackware.com)
#
# Syntax: ROOT=PROTOCOL:URL
#
# NOTE: swaret will use the order of the specified ROOT URL's.
#
#ROOT=file:/mnt/cdrom
#ROOT=file:/mnt/dvdrom
#ROOT=file:/mnt/usbmemstick
#ROOT=ftp://ftp.nluug.nl/pub/os/Linux/distr/s ... e-$VERSION
#ROOT=http://sunsite.cnlab-switch.ch/ftp/mirr ... e-$VERSION
#ROOT=ftp://ftp.slackware.no/pub/linux/slackw ... e-$VERSION
#ROOT=http://www.slackware.no/slackware/slackware-$VERSION
#ROOT=ftp://ftp.slackware.at/slackware-$VERSION
ROOT=http://www.slackware.at/data/slackware-$VERSION
#ROOT=ftp://ftp.planetmirror.com/pub/slackwar ... e-$VERSION
#ROOT=http://ftp.planetmirror.com/pub/slackwa ... e-$VERSION
#ROOT=rsync://rsync.slackware.no/slackware/slackware-$VERSION
#ROOT=rsync://rsync.slackware.at/slackware/slackware-$VERSION
#ROOT=file:/pub/slackware
#ROOT=file:/mnt/nfsshare/slackware
#ROOT=file:/mnt/sambashare/slackware
#
# -----------------------------------------------------------
# Define Repository URL's with Slackware Linux Packages.
# (Used for Repository Slackware Linux Packages)
# (Repository URL's available at http://swaret.sourceforge.net and
# at http://www.linuxpackages.net/mirrors.php)
#
# NOTE 1: To use a Local Repository or Remote Repository,
# be sure it contains the following Files:
# - CHECKSUMS.md5 (For MD5 Sum, REQUIRED)
# - FILELIST.TXT (For Package Name + Size, REQUIRED)
# - PACKAGES.TXT (For Package Description, NOT REQUIRED)
# - MANIFEST.bz2 (For Dependency Support, NOT REQUIRED)
# NOTE 2: To create your own Repository, use 'swaret-tools'.
# You can get 'swaret-tools' at http://swaret.sourceforge.net!
#
# Syntax: REPOS_ROOT=REPOSITORYNAME%PROTOCOL:URL
#
# NOTE 1: The REPOSITORY NAME can only be ONE Keyword!
# NOTE 2: swaret will use the order of the specified REPOS_ROOT URL's.
#
REPOS_ROOT=LinuxPackagesDOTNET%http://www2.linuxpackages.net/packages/Slackware-10.2
REPOS_ROOT=Slacky.it%http://www.slacky.it/download
#
#REPOS_ROOT=My_Slackware_Packages_On_CD-ROM%file:/mnt/cdrom
#REPOS_ROOT=My_Slackware_Packages_On_DVD-ROM%file:/mnt/dvdrom
#REPOS_ROOT=My_Slackware_Packages_On_USB_Memory_Stick%file:/mnt/usbmemstick
#REPOS_ROOT=SomeRemoteRepository%ftp://ftp.someremoterepository.net/slac ... kware-10.0
#REPOS_ROOT=SomeRemoteRepository%http://www.someremoterepository.net/sla ... kware-10.0
#REPOS_ROOT=SomeRemoteRepository%rsync://rsync.someremoterepository.net/slackware/slackware-10.0
#
# ------------------------------------------------------------
# Define Libraries (8.1 or Higher or Current) List Mirrors.
# (Used for Dependency Support)
#
# NOTE 1: You need to specify a Libraries List Mirror which
# contains a 'libraries-VERSION' File.
#
# NOTE 2: To create the Libraries List, use 'swaret-tools'.
# You can get 'swaret-tools' at http://swaret.sourceforge.net!
# You can also clear all DEP_ROOT Variable(s) which will
# allow swaret to create the Libraries List for you
# during Dependency Check using the defined ROOT Variable(s) above.
#
# Syntax: DEP_ROOT=PROTOCOL:URL
#
# NOTE: swaret will use the order of the specified DEP_ROOT URL's.
#
DEP_ROOT=http://swaret.sourceforge.net
#DEP_ROOT=file:/mnt/cdrom
#DEP_ROOT=file:/mnt/dvdrom
#DEP_ROOT=file:/mnt/usbmemstick
#DEP_ROOT=file:/pub/swaret
#DEP_ROOT=file:/mnt/nfsshare/swaret
#DEP_ROOT=file:/mnt/sambashare/swaret
#
# ----------------------------------------------------------
# General Settings
#
# Do you want swaret to use Random Slackware Linux Mirrors?
# -> 1 for yes, 0 for no.
#
RANDOMR=0
#
# Do you want swaret to back-up your packages when upgradeing?
# -> If set to 1, old packages are backed up in $CACH_DIR/rollback.
# Normally this is /var/swaret/rollback. ROLLBACKMAX is the number
# of "upgrades" that will be backed up before old backups will be
# removed. Turning on rollback means upgrading packages takes
# longer, but it is more safe.
# -> If set to 0, swaret will not back up packages.
#
ROLLBACK=0
ROLLBACKMAX=3
#
# Do you want swaret to parse all the Package Descriptions?
# -> If set to 1, swaret will also match Packages whose Description
# is matching the Keyword(s) you specify after --ACTION.
# NOTE: swaret will parse all the Package Descriptions for this,
# and might slow down swaret when using an older System.
# -> If set to 0, swaret will not use Package Descriptions
# to match one or more Packages.
#
USEPKGDESC=0
#
# If you don't want swaret to Upgrade, Install, Re-Install, Download,...
# some Packages, add the KEYWORDS to the EXCLUDE Variable.
# To disable Exclude Method: swaret --exclude -off
# To enable Exclude Method: swaret --exclude -on
#
# NOTE: You can add ANY EXTENDED REGEXP (Regular Expression) to the EXCLUDE Variable(s)
#
# Basic Exclude
EXCLUDE=kernel alsa lilo
EXCLUDE=swaret
EXCLUDE=aaa_
EXCLUDE=MANIFEST.bz2$
EXCLUDE=.*dl$ .*PACKAGER$ .*MYBUILD$
EXCLUDE=x86_64
#
# Advanced Exclude
# Syntax: KEYWORD[DONT_EXCLUDE_ME_KEYWORD1,DONT_EXCLUDE_ME_KEYWORD2,...]
# Example: kde-i18n[nl,en_GB] koffice-i18n[nl,en_GB]
#
EXCLUDE=kde-i18n[it] koffice-i18n[it]
#
# Do you want to enable Dependency Check?
# -> If set to 1, swaret will start the Dependency Check after
# every Upgrade, Install and Re-Install Procedure.
# -> If set to 0, swaret will not start the Dependency Check
# after any Procedure.
#
DEPENDENCY=1
#
# Do you want swaret to Search for missing Libraries (and Fix)
# which could be found on your System, but not tracked by ldconfig?
# -> 1 for yes, 0 for no.
#
DSEARCHLIB=1
#
# Set to 1, if you want swaret to use the 'slocate' program
# to Search for missing Libraries.
# (be sure to issue the 'updatedb' Command regularly!)
# If DSEARCHM is set to 0, swaret will use
# the 'find' program to locate missing Libraries.
# -> 1 for yes, 0 for no.
#
DSEARCHM=1
#
# Start MD5 Check after Fetching Packages, Patches and Sources?
# -> 1 for yes, 0 for no.
#
MD5CHECK=1
#
# Start GPG Signature Check after Fetching Packages, Patches and Sources?
#
# NOTE: Check out F.A.Q. (--faq gpg) how to Import a Public GPG Key which
# will be used by the GPG Signature Check.
#
# -> 1 for yes, 0 for no.
#
GPGCHECK=0
#
# Show Description for Packages during
# Upgrade, Install, Re-Install,... Procedures?
# -> If set to 0, you will not see a Description.
# -> If set to 1, you will see a Description.
#
DESC=0
#
# Cache Directory for (Repository) Packages and Sources.
#
CACHE_DIR=/var/swaret
#
# Enable Logging?
# -> 1 for yes, 0 for no.
#
LOG=1
#
# swaret Log File
#
LOG_FILE=/var/log/swaret
#
# Show Warnings?
# -> 1 for yes, 0 for no.
#
WARNINGS=1
#
# Show Information?
# -> 1 for yes, 0 for no.
#
INFORMATION=1
#
# -------------------------------------------------------------
# Network Settings
#
# Network Interface
# Use this if you have a Network Interface.
#
NIC=eth0
#
# Local Interface
# Use this if you do not have a Network Interface.
#
# For Example (CD-ROM):
# You got a Slackware Linux CD-ROM,
# mount the CD-ROM to /mnt/cdrom and
# set ROOT to 'file:/mnt/cdrom' in /etc/swaret.conf.
# Also, set NIC to 'lo' (Local Loop Device).
#
# NIC=lo
#
# Progress
# If set to 0, swaret will use the '%' Download Interface.
# If set to 1, swaret will use the 'size' Download Interface.
# If set to 2, swaret will use the 'wget/rsync' Download Interface.
#
PROGRESS=0
#
# Timeout for wget and/or rsync.
# -> Number of seconds for Timeout
#
TIMEOUT=35
#
# Retries for wget and/or rsync.
# -> Number of Retries
#
RETRIES=5
#
# Behind a Firewall? Using FTP Mirrors?
# -> 1 for yes, 0 for no
#
PASSIVE_FTP=1
#
# If you want HTTP or FTP Proxy Support,
# uncomment and Setup the following Variable:
#
# WGET_PROXY=http://IP or HOST:PORT
#
# If you want RSYNC Proxy Support,
# uncomment and Setup the following Variable:
#
# RSYNC_PROXY=IP or HOST:PORT
#
### /etc/swaret.conf - SWARET EXAMPLE CONFIGURATION FILE ###

ho provato ma niente non si update

[simplex]

ma qual'è esattamente il problema? non aggiorna nessun pacchetto?

Ops avevo letto male il post scusa

[nio74]

ma qual'è esattamente il problema? non aggiorna nessun pacchetto?

No nn riesco a fare l'update di swarez (swarez --update) cerca dai repository ma poi su tutti mi mette FAILED

[nio74]

ho risolto con questo
############################################################
#
# swaret.conf, Version: 1.6.2
#
### /etc/swaret.conf - SWARET EXAMPLE CONFIGURATION FILE ###
#
# Define a valid Slackware Linux Version.
# (Used for Dependency Support and other Features)
#
# NOTE: If you want to use Slackware Linux Current,
# set VERSION to 'current' (VERSION=current).
#
VERSION=current
#
# Define the language for status and error messages
LANGUAGE=ITALIANO
#
# ----------------------------------------------------------
# Define Slackware (8.1 or Higher or Current) Linux Mirrors.
# (Used for Official Slackware Linux Packages)
# (Slackware Linux Mirrors available at http://www.slackware.com)
#
# Syntax: ROOT=PROTOCOL:URL
#
# NOTE: swaret will use the order of the specified ROOT URL's.
#
#ROOT=file:/mnt/cdrom
#ROOT=file:/mnt/dvdrom
#ROOT=file:/mnt/usbmemstick
ROOT=ftp://ftp.nluug.nl/pub/os/Linux/distr/s ... e-$VERSION
ROOT=http://sunsite.cnlab-switch.ch/ftp/mirr ... e-$VERSION
ROOT=ftp://ftp.slackware.no/pub/linux/slackw ... e-$VERSION
ROOT=http://www.slackware.no/slackware/slackware-$VERSION
ROOT=ftp://ftp.slackware.at/slackware-$VERSION
ROOT=http://www.slackware.at/data/slackware-$VERSION
ROOT=ftp://ftp.planetmirror.com/pub/slackwar ... e-$VERSION
ROOT=http://ftp.planetmirror.com/pub/slackwa ... e-$VERSION
#ROOT=rsync://rsync.slackware.no/slackware/slackware-$VERSION
#ROOT=rsync://rsync.slackware.at/slackware/slackware-$VERSION
#ROOT=file:/pub/slackware
#ROOT=file:/mnt/nfsshare/slackware
#ROOT=file:/mnt/sambashare/slackware
#
# -----------------------------------------------------------
# Define Repository URL's with Slackware Linux Packages.
# (Used for Repository Slackware Linux Packages)
# (Repository URL's available at http://www.swaret.org/?menu=sp)
#
# NOTE 1: To use a Local Repository or Remote Repository,
# be sure it contains the following Files:
# - CHECKSUMS.md5 (For MD5 Sum, REQUIRED)
# - FILELIST.TXT (For Package Name + Size, REQUIRED)
# - PACKAGES.TXT (For Package Description, NOT REQUIRED)
# - MANIFEST.bz2 (For Dependency Support, NOT REQUIRED)
# NOTE 2: To create your own Repository, use 'swaret-tools'.
# You can get 'swaret-tools' at http://www.swaret.org!
#
# Syntax: REPOS_ROOT=REPOSITORYNAME%PROTOCOL:URL
#
# NOTE 1: The REPOSITORY NAME can only be ONE Keyword!
# NOTE 2: swaret will use the order of the specified REPOS_ROOT URL's.
#
REPOS_ROOT=LinuxPackagesDOTNET%http://www2.linuxpackages.net/packages/Slackware-10.2
#
#REPOS_ROOT=My_Slackware_Packages_On_CD-ROM%file:/mnt/cdrom
#REPOS_ROOT=My_Slackware_Packages_On_DVD-ROM%file:/mnt/dvdrom
#REPOS_ROOT=My_Slackware_Packages_On_USB_Memory_Stick%file:/mnt/usbmemstick
#REPOS_ROOT=SomeRemoteRepository%ftp://ftp.someremoterepository.net/slac ... ckware-9.1
#REPOS_ROOT=SomeRemoteRepository%http://www.someremoterepository.net/sla ... ckware-9.1
#REPOS_ROOT=SomeRemoteRepository%rsync://rsync.someremoterepository.net/slackware/slackware-9.1
#REPOS_ROOT=MyLocalRepository%file:/pub/myrepos"
#REPOS_ROOT=MyRemoteRepository_Using_NFS-Share%file:/mnt/nfsshare/slackware
#REPOS_ROOT=MyRemoteRepository_Using_Samba-Share%file:/mnt/sambashare/slackware
REPOS_ROOT=Slacky.it%http://www.slacky.it/download
#
# ------------------------------------------------------------
# Define Libraries (8.1 or Higher or Current) List Mirrors.
# (Used for Dependency Support)
#
# NOTE 1: You need to specify a Libraries List Mirror which
# contains a 'libraries-VERSION' File.
#
# NOTE 2: To create the Libraries List, use 'swaret-tools'.
# You can get 'swaret-tools' at http://www.swaret.org!
# You can also clear all DEP_ROOT Variable(s) which will
# allow swaret to create the Libraries List for you
# during Dependency Check using the defined ROOT Variable(s) above.
#
# Syntax: DEP_ROOT=PROTOCOL:URL
#
# NOTE: swaret will use the order of the specified DEP_ROOT URL's.
#
#DEP_ROOT=file:/mnt/cdrom
#DEP_ROOT=file:/mnt/dvdrom
#DEP_ROOT=file:/mnt/usbmemstick
DEP_ROOT=http://www.swaret.org/swaret
DEP_ROOT=ftp://ftp.swaret.org/swaret
DEP_ROOT=rsync://rsync.swaret.org/swaret
#DEP_ROOT=file:/pub/swaret
#DEP_ROOT=file:/mnt/nfsshare/swaret
#DEP_ROOT=file:/mnt/sambashare/swaret
#
# ----------------------------------------------------------
# General Settings
#
# Do you want swaret to use Random Slackware Linux Mirrors?
# -> 1 for yes, 0 for no.
#
RANDOMR=1
#
# Do you want swaret to parse all the Package Descriptions?
# -> If set to 1, swaret will also match Packages whose Description
# is matching the Keyword(s) you specify after --ACTION.
# NOTE: swaret will parse all the Package Descriptions for this,
# and might slow down swaret when using an older System.
# -> If set to 0, swaret will not use Package Descriptions
# to match one or more Packages.
#
USEPKGDESC=0
#
# If you don't want swaret to Upgrade, Install, Re-Install, Download,...
# some Packages, add the KEYWORDS to the EXCLUDE Variable.
# To disable Exclude Method: swaret --exclude -off
# To enable Exclude Method: swaret --exclude -on
#
# NOTE: You can add ANY EXTENDED REGEXP (Regular Expression) to the EXCLUDE Variable(s)
#
# Basic Exclude
#
EXCLUDE=kernel alsa
EXCLUDE=aaa_
EXCLUDE=lilo swaret
EXCLUDE=MANIFEST.bz2$
EXCLUDE=.*dl$ .*PACKAGER$ .*MYBUILD$
#
# Advanced Exclude
# Syntax: KEYWORD[DONT_EXCLUDE_ME_KEYWORD1,DONT_EXCLUDE_ME_KEYWORD2,...]
# Example: kde-i18n[nl,en_GB] koffice-i18n[nl,en_GB]
#
EXCLUDE=kde-i18n[nl,en_GB] koffice-i18n[nl,en_GB]
#
# Do you want to enable Dependency Check?
# -> If set to 1, swaret will start the Dependency Check after
# every Upgrade, Install and Re-Install Procedure.
# -> If set to 0, swaret will not start the Dependency Check
# after any Procedure.
#
DEPENDENCY=1
#
# Do you want swaret to Search for missing Libraries (and Fix)
# which could be found on your System, but not tracked by ldconfig?
# -> 1 for yes, 0 for no.
#
DSEARCHLIB=1
#
# Set to 1, if you want swaret to use the 'slocate' program
# to Search for missing Libraries.
# (be sure to issue the 'updatedb' Command regularly!)
# If DSEARCHM is set to 0, swaret will use
# the 'find' program to locate missing Libraries.
# -> 1 for yes, 0 for no.
#
DSEARCHM=0
#
# Start MD5 Check after Fetching Packages, Patches and Sources?
# -> 1 for yes, 0 for no.
#
MD5CHECK=1
#
# Start GPG Signature Check after Fetching Packages, Patches and Sources?
#
# NOTE: Check out F.A.Q. (--faq gpg) how to Import a Public GPG Key which
# will be used by the GPG Signature Check.
#
# -> 1 for yes, 0 for no.
#
GPGCHECK=0
#
# Show Description for Packages during
# Upgrade, Install, Re-Install,... Procedures?
# -> If set to 0, you will not see a Description.
# -> If set to 1, you will see a Description.
#
DESC=0
#
# Cache Directory for (Repository) Packages and Sources.
#
CACHE_DIR=/var/swaret
#
# Enable Logging?
# -> 1 for yes, 0 for no.
#
LOG=1
#
# swaret Log File
#
LOG_FILE=/var/log/swaret
#
# Show Warnings?
# -> 1 for yes, 0 for no.
#
WARNINGS=1
#
# Show Information?
# -> 1 for yes, 0 for no.
#
INFORMATION=1
#
# -------------------------------------------------------------
# Network Settings
#
# Network Interface
# Use this if you have a Network Interface.
#
NIC=eth0
#
# Local Interface
# Use this if you do not have a Network Interface.
#
# For Example (CD-ROM):
# You got a Slackware Linux CD-ROM,
# mount the CD-ROM to /mnt/cdrom and
# set ROOT to 'file:/mnt/cdrom' in /etc/swaret.conf.
# Also, set NIC to 'lo' (Local Loop Device).
#
# NIC=lo
#
# Progress
# If set to 0, swaret will use the '%' Download Interface.
# If set to 1, swaret will use the 'size' Download Interface.
# If set to 2, swaret will use the 'wget/rsync' Download Interface.
#
PROGRESS=2
#
# Timeout for wget and/or rsync.
# -> Number of seconds for Timeout
#
TIMEOUT=35
#
# Retries for wget and/or rsync.
# -> Number of Retries
#
RETRIES=5
#
# Behind a Firewall? Using FTP Mirrors?
# -> 1 for yes, 0 for no
#
PASSIVE_FTP=1
#
# If you want HTTP or FTP Proxy Support,
# uncomment and Setup the following Variable:
#
# WGET_PROXY=http://IP or HOST:PORT
#
# If you want RSYNC Proxy Support,
# uncomment and Setup the following Variable:
#
# RSYNC_PROXY=IP or HOST:PORT
#
### /etc/swaret.conf - SWARET EXAMPLE CONFIGURATION FILE ###

[nio74]

cry:

No credevo funzionasse ma invece no nn riesce a stabilire un collegamento

[StormyMonday]

Devi avere ad esempio:
ROOT=http://www.slacky.it/download
e piu sotto:
REPOS_ROOT=Slacky.it%http://www.slacky.it/download
Inoltre è meglio usare
LANGUAGE=ENGLISH
Personalmente uso solo 2 repository per la current e mi trovo benissimo

ROOT=http://www.slacky.it/download
ROOT=ftp://elektroni.phys.tut.fi/slackware-current/

e naturalmente i corrispettivi:

REPOS_ROOT=Slacky.it%http://www.slacky.it/download
REPOS_ROOT=Elektroni.fi%ftp://elektroni.phys.tut.fi/slackware-current/

[gnubit]

Iniziamo da capo.

Apri una console come root
dai il comando route
l'ultima riga (il gateway predefinito) è relativo a eth0 (valore di Iface)?

Se si passiamo oltre.

Prova ad abilitare il proxy, configurando queste righe.

#
# If you want HTTP or FTP Proxy Support,
# uncomment and Setup the following Variable:
#
# WGET_PROXY=http://IP or HOST:PORT
#
# If you want RSYNC Proxy Support,
# uncomment and Setup the following Variable:
#
# RSYNC_PROXY=IP or HOST:PORT
#

[nio74]

Ho provato ma niente

ho disabilitato anche il firewall del router ma niente.

Ho notato che quando avvio swaret --update si muovr la luce del firewall ma poi si ferma

[nio74]

qualcuno ha la soluzione al mio problema

[gnubit]

Hai provato a fare un wget di un file a caso da una delle repository?

Tanto per provare intendo